One movie file can not respond in finder of MacBook Pro? How to stop it responding?

In my MacBook Pro,Finder is not responding---others are working.Laptop becoming hot.How to solve it?

My guess here is there is some issue with the use of Paragon NTFS. Perhaps updating it or using another NTFS driver (like Tuxera, or its free alternative NTFS-3G) will work. All in all, using NTFS in write mode with these options will be using a non-supported approach for accessing your drive, which could lead to odd problems if Apple makes a change that interferes with the functions of these drivers. At other times, such drivers use inherently less stable approaches (such as the FUSE environment) that could lead to problems if not formatted correctly.
If your drive is working, and the formatting is checked out properly in Windows and other systems, then I'd suggest you check on your NTFS driver and update or replace it. Alternatively, if you only use the drive with your Mac, then consider formatting it to Apple's native Mac OS Extended. Lastly, if you use the drive with multiple operating systems, then consider using FAT32 or ExFAT as the format, as these are fully supported in OS X (unlike NTFS, which is only supported for reading).

Similar Messages

Using Migration Assistant to move files from old PC laptop to new MacBook Pro that has Windows 8 installed containing Outlook

When using Migration Assistant to move files from old PC laptop to new MacBook Pro, that has Windows 8 installed containing Outlook, will emails, contacts and calendar entries be moved to Outlook on the new MacBook or into Mail, Contacts and Calendar?

I doubt they will. But then I'm not sure as I used a migration program once about 18 years ago and totally FUBARed the system I had at that time and I've never used one again.
For me the reason to have a new system is to start fresh. Installing only program that I now use and manually copying data over from the older system.
Not sure your older version of Outlook, and the outlook mail boxes, are compatible with Office/Outlook for Mac 2011.
A better place to ask this question would be on the MS Office for Mac forums.
Hope it all works out for you.

I tried to encrypt using file vault but it froze slowing my macbook pro, how can i get things moving or stop the encryption

i tried to encrypt using file vault but it froze slowing my macbook pro, how can i get things moving or stop the encryption

Back up all data before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
Then, from the menu bar, select
File ▹ Turn Off Encryption
Enter the password again.
You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
Mac OS Extended (Journaled)
from the Format menu.
You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

Nas can not access secure parts from Macbook pro

Black Armor 220 nas can not access secure parts from Macbook pro, although access sucess Public parts (no password), is any setting in Lion or else needed setup?
Late 2006 model , 15'

is any network sharing files Setting for secure files sharing in a NAS(wifi with mac via internet gateway), or to be able access Public files (but not secure), the password must be the problem?

Hello I can not access my account through MacBook Pro solution knowing I access the account through iTunes and iPad please help

Hello I can not access my account through MacBook Pro solution knowing I access the account through iTunes and iPad please helpfile://localhost/Users/mhmd/Desktop/%E2%80%8Fلقطة%20الشاشة%20٢%D9%A0١٢-١٢-٢ ١%20في%20٥%E2%80%8E.١٦%E2%80%8E.٤٢%20ص.pngfile://localhost/Users/mhmd/Desktop/%E 2%80%8Fلقطة%20الشاشة%20٢%D9%A0١٢-١٢-٢١%20في%20٥%E2%80%8E.%D9%A0٩%E2%80%8E.٤١%20ص .png

Ummm...
Can you explain in details what happens when you try?

Security questions are blank in security pop up page. Can not answer questions not visible, can not proceed. Iphone,ipad,macbook pro same result. Apple support has no answer.

Security questions are blank in security pop up page. Can not answer questions not visible, can not proceed. Iphone,ipad,macbook pro same result. Apple support has no answer.

Security questions are blank in security pop up page. Can not answer questions not visible, can not proceed. Iphone,ipad,macbook pro same result. Apple support has no answer.

HT204053 I do not have ICoud in my MacBook Pro, how to install it

I do not have ICoud in my MacBook Pro, how to install it

It looks like you operating system may not meet the minimum requirement.
Cheers
http://support.apple.com/kb/HT4759

Gray .mov files -- can not choose files to burn

1.) I saved my 80-minute FCE PAL project to a .mov file. I used iDVD to successfully burn it to a disk (tried "One-Step" but since it wasn't from a camera used "Existing Project"). It played on my computer and on a DVD player.
2.) I did the same but used NTSC as the FCE designation. That also worked.
3.) I went on a trip, disconnected my computer from wall socket.
4.) Returned, tried to burn a disk and only see those .mov files in gray ... so can not burn anything with iDVD.
5.) I noticed in preferences that iDVD has an option for NTSC. I had had it set on PAL (it's been a long time since I used it). That change made no difference, .mov files still gray.
6.) I looked through this forum as well as iDVD Help, could not find anything.

The crucial word here is "burn". The menu command File > Burn Project To Disk lets you burn an archive of your project onto a DVD. It's not used to archive to a drive.
Sorry, I have no experience with Dual Layer drives so I don't know if iMovie 6 can use Dual Layer or not. It may not. Searching for "burn" in iMovie Help didn't help.
If your can't burn to a Dual Layer with that command, you might try using the Finder to burn the project onto the DVD. It should be able to handle saving files on a Dual Layer disk. Search for "Dual Layer" in Finder Help.
To create an archive on an external disk, use the iMovie 6 menu command File > Save Project As. That saves a copy of the project on whichever drive you choose.
Yes, that volume must use the Mac OS Extended disk format, the standard Mac file format. If it's a different format iMovie can't reliably save to the volume. (Most FireWire drives ship with a different format.) Use the application Disk Utility to erase the drive.
Karl

Help mov files can not be viewed, created with digital camera

My vacation vids where made with a panasonic lumix z7 camera. the files sizes are 158000, 175000,168000,225457. they all are named my the camera and end with .mov. quicktime does not know what theses files are. windows does not see these files as quicktime files and nothing can read them. i do not know what the camera did to corrupt these videos. Can anyone help me with these files. Is there a way to repair them? please help me if you can.
file names are p1010816.mov etc

I updated the program, and my pics were still there, but they could'nt be viewed in full...just thumbnails.
What could you see? A ! ? Or a ? Or just a plain black or white screen?
I cannot add JPG's to iPhoto.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I have mac os 10.7.5 and my .mov file can not be opened

because the "file format can not be recognized." How do I fix?

Thanks for responding.
I am still getting this message after trying what you suggested:
Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.
I have downloaded more than once: AdobeReaderInstaller_11_en_ltrosxd_amc_aih-1.dmg<http://aihdownload.adobe.com/bin/live/AdobeReaderInstaller_11_en_ltrosxd_amc_aih.dmg> It never asks me to check the EULA
I have Safari 6.1 (7537.71)

HT1349 I can move my mouse on track board but nothing else works even pushing enter will not engage any program. But my mail is still coming in. Can not open any program. MacBook Pro 17 in

I can move curser across screen on track board but cannot open anything ,even if I push the enter key..also the bottom corner of battery pack where it locks in is slightly lifted. It turns on and off , gets mail but nothing else as I can not open any program. Including about my Mac.. I was using snow leopard.

I can move curser across screen on track board but cannot open anything ,even if I push the enter key..also the bottom corner of battery pack where it locks in is slightly lifted. It turns on and off , gets mail but nothing else as I can not open any program. Including about my Mac.. I was using snow leopard.

Can not shut down late 2011 MacBook Pro and turn it back on again without the hard drive disappearing?

Ok, I have searched for months for an answer to this question to no avail, probably because no one has experienced it before. I am hoping however that you guys can help me figure this one out cause it is driving me nuts! Also, I am not entirely sure what section of the support I should put this under so if I stick it in the wrong place, I apologize.
Right now my problem is very simple. When I turn off my laptop, and then try to turn it back on, my internal hard drive disappears... and I get the blinking folder with a question mark on it. I have figured out something interesting however. I have an install disk with Ubuntu Linux on it. If I boot into that first, then RESTART the laptop, not shut down and turn back on, it reads the internal hard drive just fine and I can boot as if there is nothing wrong.
Second part to the problem... If I allow the laptop in either OSX or Windows to go to sleep (aka shut off the hard drive but the computer remains on), when I attempt to wake it up, I am greeted with the usual log in screen of whichever OS I am in, but is frozen and after a few seconds goes black and restarts the computer to find that... Surprise! The hard drive is gone
I have tried every trick in the book that I can think of, but can not seem to come up with a solution to the problem... I know when the problem happened and if anyone thinks that that will help them figure this out I will type everything I did up till, including the crash that caused this, and my attempted fixes, but I have class right now so only if you guys want it I will type all that out.
What I am currently running is:
2011 MacBook Pro 13in screen
4Gb of Ram
1TB internal Hard Drive
OSX 10.11.whatever the newest update is... just updated the other day again.
Windows 8.1 on BootCamp 5 (yea I know its not supposed to work but it does) again, fully updated
Ubuntu 13.10 (I think? Doesn't really matter, its just an install disk I use to boot the computer)
If there is anything else that you guys need me to provide, I can, just simply ask. I can provide as much info as is necessary.

Sorry it took me so long to write back, But unfortunately this didn't help my issue.
My uncle and I did a lot of tests on this computer and have narrowed down the location of the problem a little bit.
We tried to first reset the SMC and the NVRAM as suggested, but the only thing that did was make the fans run on full tilt for the first session after restarting it for some reason. After that we tried re installing OSX over the OSX that was already on the system (not removing any of the files). This also didn't do anything but make refit stop working. Then we moved onto the next task at hand by removing the hard drive entirely and booting it as an external drive from one of the USB ports... as long as you booted it with the options key held down, it worked perfectly fine. Then we put an alternative hard drive into the computer and installed OSX on that. This time there was no trouble booting anything up. Everything seemed to work flawlessly. So we made a backup of my original drive (OSX, Windows, and all) onto an external hard drive and tested booting to it via USB. That again worked perfectly fine and booted right up with no problems. So after that we formatted the original hard drive and reinstated OSX. We then proceeded to transfer all the old files from the backup onto this new installation and LOW AND BEHOLD..... we were back to square one with it refusing to recognize the hard drive again.
So this basically told us that there appears to be something either wrong with the hard drive, or something got really screwed up in the software along the lines and by me copying all my old files back over, I just ended up bringing the screwed up file back over with it! (despite not copying over any settings of any kind) So I am still extremely confused as to what is going wrong... did some boot sector possibly get screwed up may be?

Can not open app store on macbook pro/imac after installing Mavericks

I have just installed Mavericks on both a Macbook Pro and an iMac. I use the same Appleid on both.
But now I can not open App Store
I have tried clicking on the App Store symbol in the dock, starting it from the program folder in a Finder window, and starting it from the Apple menu. The result is the same: Nothing happens except that the menubar that was active before the attempt becomes inactive (dark). There is no App Store Window, and no App Store menubar.
I have one idea why this happens. I removed the "OS X Mavericks" from the list of downloads/purchases in App Store by misstake before I installed Mavericks. If that is the problem how can I solve it?

Ok, now it works again. I got a Notice that I could update some applications and I answered that I wanted to do that. Then, when I tried to start App Store the menubar showed up but no window. I choosed "Windows - Minimize", exited App Stored and started it again. And now it works - on both computers!

Can not turn on wifi on MacBook Pro

Hello
I have a MacBook Pro late 2011 running Mac osx lion 10.7.5
My problem is that my computer suddenly tourned wifi off and it won't turn on again. I've searched the problem on the web (with the iPad, since the MacBook had no connection...) but no solution has worked.
What I tried until now:
-restart
-disable the wifi connection in system preferences then restart
- disable, eliminate then recreate the wifi service in system preferences then restart
- restart in safe mode (here the wifi worked, but when I restarted the computer again I was back at the start)
- repair permissions on HD (4 times) then restart

Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Preferences/SystemConfiguration
Click Go then move all the files in the SystemConfiguration folder to the Trash.
Turn off the base station for about ten seconds then turn it back on.
See if makes a differrence.
Your Mac will generate a new SystemConfiguration folder for you.
Then try your Wi-Fi.

Can not view videos on my Macbook Pro

I have a 13-inch Macbook Pro. Earlier this morning it prompted me for a software update, and I did it. Upon the computer restarting itself, I can no longer view any sort of videos on my computer. Youtube videos just come up as a black screen without the pause/play thing at the bottom, and any video embedded in an article just shows up as a blank space. Videos linked on Facebook will just load and load and never finish loading. I downloaded the newest version of Adobe Flash just to be sure, and it shows up in my system preferences as installed, but still nothing. Any help on this issue would be much appreciated, thank you!

Run thorough this, I suspect another issue, but by process of elimination it might be discovered
Step by Step to fix your Mac

One movie file can not respond in finder of MacBook Pro? How to stop it responding?

Similar Messages

Maybe you are looking for