One of 4 node RAC always have higher load averages and higher than others

Hello,
We have a 4 node rac, 9208 on linux 4. When viewing top, we noticed the same one node always have a higher load average than the other 3 nodes. Is this normal. Loan balance is working fine but this one node always have higher load average. This is the node where we do the rac installation. Thank you.

I do not remember what is the default for clb_goal (client load balancing) for 9i but 10g is LONG.
check it
select clb_goal from dba_services where name = <service name>
you may have to change from LONG to SHORT OR SHORT to LONG depending your connection types.
dbms_service.MODIFY_SERVICE(‘<service>’,clb_goal=> dbms_service.CLB_GOAL_LONG);
Read the following article.
http://www.databasejournal.com/features/oracle/article.php/3659411/Oracle-RAC-Administration---Part-15-Connection-Load-Balancing-and-FAN.htm

Similar Messages

  • I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your

    I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your question?

    Have you not got the music on your computer and/or on backups on, for example, external drives or CDs/DVDs ?

  • Is it possible to save keynotes on a central place so that multople users  on mac/ipad.iphon can always have the latest version and edit this ?

    Is it possible to save keynotes on a central place so that multople users  on mac/ipad.iphon can always have the latest version and edit this ?

    If you mean saving the project files;   iCloud, Dropbox, Skydrive will  do this.
    If you mean the application, then definitely not possible.

  • TS3276 cannot receive mail after i sent a large photo.   A new folder appeared called "recovered messages" with the over 100 recovered emails of the same email of the one i sent out.  i have read apple support and done everything they suggest.  Help!

    I cannot receive mail after i sent a large photo.   A new folder appeared called "recovered messages" with the over 100 recovered emails of the same email of the one i sent out.  i have read apple support and done everything they suggest.  Help!

    How large is 'large'?

  • PLEASE HELP! my iPod got stolen but i got it back . and now it can be off i try to charge it and it would go to the silver apple and it would have a loading circle and it freezes |: PLEASE HELP

    PLEASE HELP! my iPod got stolen but i got it back . and now it can be off i try to charge it and it would go to the silver apple and it would have a loading circle and it freezes |: PLEASE HELP

    Hi,
    This Link contains the Steps on How to Restore your Device...
    http://support.apple.com/kb/HT1414
    Cheers,
    More Support Here:
    http://www.apple.com/support/ipod/

  • Why are some cells in my spreadsheet higher than others? There's like extra space.

    Why are some cells in my spreadsheet higher than others? There's like extra space.

    DreamLife,
    you can adjust the row height byt selecting the separator between rows.  It is possible you made this adjustment accidentally.  To se the row height to be the same as other rows select a row that has the height you want:
    Then open the table inspector.  Look at the row height and note the value.  Now select the row (s) you want to adjust, then change the "Row Height" value in the table inspector.  To view the inspect select the menu item "View > Show Inspector"

  • Hi. I have down loaded songs and tv shows on my i phone 4s but i can remove them from my phone. I have transfered purchases and cun ticked sync music and tv shows but still i have the downloaded contenet on my phone. Please help

    I have down loaded songs and tv shows on my i phone 4s but i can remove them from my phone. I have transfered purchases and cun ticked sync music and tv shows but still i have the downloaded contenet on my phone. Please help

    also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem

  • How do I copy the same app folder layouts from one device to another? We have a several iphones and ipads.

    how do I copy the same app folder layout from one device to another. We have several apple devices.
    It's a challenge when syncing a device for the first time to go through all the apps and apply them back to the same folders as on your other iphone.
    I've seen suggestions of taking pictures of the correct layout, then manually applying it to the new device. Big time waister.
    What's the work around?
    Thank you

    I'm afraid there is no short workaround. One thing that you could do if you were REALLY desperate is reset your device to factory settings and then restore it from your other device's backup, but that is rather risky and you probably don't want to take your chances just for folder layouts. I would just do it manually.

  • Can I download Adobe Creative Suite 5.5 Design Premium on a new Mac if I've had it installed on my old one since December 2011? I have the product key and serial number.

    I bought a new Macbook Pro 13 inch in December 2011 and I bought the Adobe Creative Suite 5.5 Design Premium shortly after and installed it on the computer.  The other day my friend spilled his drink on my computer and it is now going to cost me $800 to get it fixed so I am considering getting a new one instead of getting mine fixed I'm not sure if the memory is still ok or not either.  It didn't get that wet and Apple told me it is more than likely ok but there is no guarantee that they are going to keep the memory when they fix it.  So I was wondering if I get a new one if I can install the Suite on the new one I still have the product key and serial number for the Suite.  Or if I decide to get mine fixed and the memory is swept, then can I reinstall it on mine after it is fixed?  If anyone can help me it would be greatly appreciated!!! Thank You

    deactivate your installation on your old computer (help>deactivate).
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • TS5192 After updating with 4.09 my photos which I store on an external hard drive will load into Aperture for 15 or so photos and then I just get the same photo repeating despite clicking on a different one in the group.  I have to stop working and come b

    After installing the 4.09 fix to process RAW from Sony RX100 (after updating to 3.5.1), photos do not continue to load into Aperture from the external hard drive where they are referenced.  The same photo is stuck in the adjustments frame to be worked on and the photos will not advance, no matter what I try, so i can work on the next one.  I can only work on a few at a time and then i have to go away and come back another day.  4.09 does fix the barrel distortion but it has completely gummed up the uploading of the referenced photos.  It's taking me days and weeks to process a couple of hundred photos.

    The Macbook Air is a low end Macintosh for graphics apps and you are asking it to perform a heavy pro workflow using a pro application. The integrated GPU of MBAs is a serious limiter to heavy graphics. Personally I would expect flaky performance with certain operations. In general I recommend that Aperture users choose boxes with independent GPUs and capable of taking 16 GB RAM if necessary.
    It will be important to carefully optimize workflow. How much RAM is in the MBA? The most Apple specs is 8 GB but you can check OWC to see if you can go to 16 GB. My Aperture/Photoshop workflow paged out at 8 GB RAM before I upgraded to 16 GB RAM.
    You should evaluate whether or not you have adequate RAM:
    Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture/Photoshop work session and write the number down. Recheck the Page Outs count after working for a few hours and write the number down again. If the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved.
    Ignore the pie charts and other info in Activity Monitor because they can be misleading regarding RAM usage. For RAM analysis, manually count page outs before and after a work session.
    HTH
    -Allen

  • I just bought a used XP Home Edition program that has been installed before. Will I be able to install this again on my computer or is it only a one time use software? I have the Product Key and CD.

    I just bought a used XP Home Edition software program that has been installed before. I have the Product Key and installation disc. Will I be able to install it on my own computer? Or, is this software (purchased retail) a one time install? Please advise.

    Depends on many things.
    If your system is Lion, XP can only be installed under VM.  BootCamp in Lion only accepts Windows 7.
    As to "one use only", if you are referring to OEM ...
    A reinstall can trigger the OS to "not register" because "a major component serial number or MAC (the network MAC chip) address" has changed, according to MS databases.
    But you can call MS to get the key reactivated, usually/sometimes.  It is worth a try, at least, before spending money on another Windows 7 package.  But this discussion should end *now* at "maybe" as it treads close to matters that forum Terms-of-Use would prefer we not discuss.

  • Always have to restart router and modem.

    I don't think this actually is the airport's fault and this only happens at my house, but maybe someone would know.
    I have airport extremes in my G5 and ibook, and a linksys broadband modem, and a motorola router. if i restart my computers or the computers go to sleep i always have to unplug the modem and router to reset them; then the internet finally works. The only place i ever have to do this is my house, it always automatically works anywhere else. Anyone know what could be causing this?

    when i first turn on the computer, or wake it up from sleeping the airport wireless recognizes my wireless connection but can't connect to the internet. when i unplug the router and modem i unplug it, wait about 10 seconds then plug it back in. after doing this my internet works fine for as long as the computer stays on. if i turn it off, or put it to sleep again, however, then i must unplug the router and modem again. i don't know why unplugging it works, but i was hoping maybe someone knew what i could do to have it just work automatically.

  • Nokia N95 8gb always have to set date and time whe...

    When I turn my Nokia N95 8GB on I always have to set the time and date, even when i've not removed the battery. I turn my phone off at night and in the morning when I turn it back on I have to set the time and date again and again and again, every single time I turn it back on. Does anybody know what's going on?

    This might be the solution to your problem: /t5/Nseries-Devices-and-S60/N95-asks-for-date-and-time-everytime-Its-turned-off/m-p/366071/highlight...

  • First page prints higher than others

    I'm modifying a check RTF template for EBIS R12 that was given to me and I've been able to get everything working except for one thing - the first page of output prints one line higher than all the rest. Has anyone ever experienced this before? I'm quite new to XML design so I'm sure I've just missed something simple. Any advice would be appreciated.

    Hi,
    this is due to grouping or for loop function rtf if u eliminate those also u need to decrease the font size of those tags to 1

  • Can I transfer time machine image from one MacBook to another if both have same OS version and both have same size hard drive?

    I purchased a MacBook Pro in December 2010.  Got it with 500GB, 7200 RPM hard drive.  Used Time Machine to create back up. Gave the computer to my son last week and just purchased a new generation MacBook Pro with the same hard drive as old Mac.  I have had issues with bootcamp on new Mac so I removed the partition and now new Mac will not boot without holding down Option key. I know I can do a re-install of the OS.   But, can I use the Time Machine back up from the old Mac to restore the new Mac to look just like the old Mac?  Partition and all?  I did have bootcamp working just fine on the old Mac.  Put lots of software on it that I now don't have on the new Mac (but would like to have).  So, am I just hopeful or can I use the Time Machine back up from the old Mac to restore my my Mac?  If so, how do I do it.  I am a recent PC convert who is pretty good on PC, but a babe in the woods on my Mac.

    No.  Time Machine won't get your boot camp partition back.  There are excellent utilities that move entire hard drive contents among hard drives such as SuperDuper! and CCC, but as far as I know they don't work with boot camp partition.  My suggestion: reinstall Mac OSX on your new Mac (you don't want to hold Option key to start it everytime anyway), partition it with boot camp exactly (or similarly) as you did to your previous Mac (install the same operating system, which should be one of the Microsoft Windows I assume).  Use Migration Assistant as kaz-k suggested to move all the stuff on the Mac partition of your previous Mac.  Reboot both your Macs from the boot camp partition - I assume they are all on Windows platform.  Now you have two computers on Windows platform.  Use Norton Ghost or similar tools to migrate all the stuff from your old machine to your new machine.  Hope this helps.  Backup all your data before such operation.  Good luck.

Maybe you are looking for

  • Best practice for implementing META tags for content items?

    Hello, The portal site I'm responsible for managing our content (www.sers.state.pa.us) runs on the following WebCenter products: WebCenter Interaction 10.3.0.1 WebCenter Publisher 6.5 WebCenter Studio 2.2 MP1 Content Service 10gR3 The agency I work f

  • Productive uses for Mac Mini?

    Hi all, I remember using my PC to download music back when i had dial up 10 years ago. I used to leave it running all night and in this way it was doing something productive. Now I have broadband and it's no longer an issue. It seems like new hardwar

  • Report Painter. Form edited only display first page.

    Hi All, I have add on new column on my report painter and now the display is more than one page. There is warning "Only the first page is displayed in the report" whenever i execute to make modification using T-code : FMEO. There is ">" ">|" button a

  • Substitution

    Hi All, how substitution can be adopted in workflow? wht is active substitution and wht is passive substitution? Thanks in advance

  • Duplicate audio information

    Buenas tardes, he creado una página de audio con iWeb que contiene diversos archivos obtenidos desde mi disco duro, como hipervínculos. Ahora quiero crear otra igual,con los mismos archivos sin que se dupliquen, o sea, que se redireccione un cuadro d