One of four email accts will not send mail
I have a Z. Tablet. I set up four of our business email accts and all will receive mail but one will not send mail. Tried many combinations of smtp addresses but no joy. Consulted my email provider tech guys. They set up using same on another android device and worked for them. They have given up on solving this. It just happens this is the most important mailbox. Anyone offer help to solve?
What if you use a different email app? perhaps Moxier, K9, Maildroid?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)
Similar Messages
-
One of my email accounts will not send email, and is not linked to data file.
I have three email accounts set up with my Outlook 2010. All are POP3. All three accounts have been working fine, until the last day or so. One of my accounts will no longer allow me to send messages. When I go to my account settings, the two accounts that
are working show the following:
Selected account delivers new messages to the following locations:
Email Address\Inbox
in data file C:\...
The one that doesn't work shows the following:
Selected account delivers new messages to the following locations:
My Name\Inbox
The .ost data file for this email address is still in the same place, right next to the other two data files for the working accounts. For some reason, Outlook no longer has it linked to my account. How can I go about fixing this issue?
Thanks.Hi Gwidion,
Outlook 2010 and 2013 create PST per POP3 account. In simple, single PST file for single POP3 account. So, don’t be panic. Just change the location of the
PST data file by following the given path in Outlook 2010:
File >> Account Settings >> Emails
In the “Email” tab, choose the particular account which is not able to send emails and make a double click on it or click on
“Change Folder” option. Finally, set the location of Email address.
Hopefully it will help, otherwise simply recreate a new Outlook profile.
For more:
http://support.microsoft.com/kb/829918/en-us
Thanks
Clark Kent -
Since upgrading to v7 my email will accept in mail but will not send mail?
Since upgrading to v7 my email will accept emails, but will not send mail any suggestions?
Hello Lifechip,
Try a soft reset and troubleshoot the problem, if you do not know how to perform a soft reset click on the link below;
http://www.apple.com/support/iphone/assistant/phone/#section_1
If the problem persists, try logging out of email by going into
Settings > Mail, Contacts, Calendars > Account > Delete Account
After you have done so, click on Add Account right below the list of emails, enter all your details.
Wish you good luck,
iTechExpress -
I have a tiscali email account set up on my iPhone it receives emails but will not send - any one had the same issue ?
Of course you can't it is a generic document for use worldwide on every carrier mail service
The link will tell you how to set up with the info you will have received from TalkTalk when they installed your broadband
You just add that info for SMTP settings
in iPhone
settings>>>>mail contacts a7 calendars>>>chose relevant service (tiscali or TT which ever it is called >>>outgoing mail server
all as decribed in the above document
now read the doc again and follow the instructions once you have established the correct settings from your
TT documentation -
Multiple hotmail accounts but one will not send mails and gives no error messages
I have four hotmail accounts on my iPad (me, kids, wife) and we have all been using them fine however, my wife's hotmail account will not send mails. I get no error messages at all for this to explain why, it just doesn't reach the intended recipient and does not turn up in the sent mail folder.
I have deleted the account and re installed using a number of the choices including other outlook and even tried yahooing no change.
Can anyone assist.
I am on the latest iOS
ThanksThis problem in Mail is usually caused by some Launch Services cache or preferences corruption that affects the built-in spell checker. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer. -
My iPad 2 will receive Email but will not send it . Any Suggestions ?
I have recently acquired an iPad 2 which I have attempted to set up .
It will receive Email but will not send Email .In outgoing mail I have
SSL turned on and the server Port is 465 . I have previously tried Server Port 993
and Server Port 857 with negative results. Any suggestions ?iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Mail will not send mail, only receive.
I have spent the majority of today re-installing OS X and all necessary updates, music, data after the death of a hard drive. Luckily everything went perfectly, except for the same problem I had with Mail even before the 1st hard drive died. Mail will not send mail, only receive.
All efforts time out and give me this message: "The connection to the server mail.earthlink.net on port 25 timed out"
Mail used to send messages, but stopped suddenly in 2004 and has yet to start again. Any idea guys?! I can't figure it out, under Account settings I have necessary fields filled in: Outgoing Mail Server (SMTP) is set to "mail.earthlink.net", Server Port is set to 25, and Authentication drop menu is set to None.
Any help would be greatly appreciated.
--DANIELThis is NOT a problem with Mail or OS X. This is an incorrect settings problem - garbage in = garbage out and this information is certainly available at Earthlink's website and Earthlink also provides technical support.
Earthlink has an authenticated SMTP server they changed to long ago.
SMTP Server: smtpauth.earthlink.net
Server Port: 587 but 25 should work if you are using Earthlink as your internet service provider for connecting to the internet.
Use SSL: Off or not selected.
Authentication: MD5 Challenge-Response
User Name: Your ENTIRE Earthlink email address.
Password: The account's password - the same password used to check the incoming mail server for new messages. -
without changing settings, iMac mail V4.6, 1)will not save password 2)takes accounts offline 3)will not except password 4)will not send mail from accounts every time.
What happen? How do I correct this?Hi Nuch1,
I found an article that is contains very thorough Mail troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
You can use that article to figure out what part of the email "ecosystem" is the cause of the issue, and it can also help you attempt to resolve it.
Hope that helps,
David -
Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blueyonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's
And, you are sure you have provided the correct username and password for you email account? I'm not familiar with Virgin media, so you might contact their tech support to find out why you are having a problem sending mail but none receiving mail. I assume your mail account has always been POP3 and not IMAP. Typically, the outgoing mail servers are not the same for the different types of account service.
-
Mail email account will not send
I have 3 rr mail accounts, all created at the same time and one will not send emails.It will receive them.
I have deketed the account 3 times and started new ewach time.
Sending emails says the outgoing mailserver is incorrect, selectanother and there are none that will work. All my other rr accounts will receive and send emails and they were all created the same way.
WHat am I missing?Perhaps the port is incorrect. Mail menu: Mail>Preferences>Accounts>Account Information. Click on the Outgoing Mail Server drop down and select Edit SMTP Server List. Then select Advanced. Try using Custom Port 25.
-
I'm trying to send out an email but it will not send. How can I stop this on my phone?
See:
iOS: Unable to send or receive email
It appears you have a incorrect entry in the setup. Google for:
setup xx email on iphone
where xx is your provider. -
My ipod touch will receive email, but will not send. I use hotmail.
I use hotmail on this ipod. It will send email without a problem, but it will not send at all. It gives me the message....a copy has been placed in your outbox. Sending the message content to the server failed....I have deleted this account and reloaded a few times...and have rebooted numerous times...I still bet the same message..What else is there to do?????
I didn't know the iPod touch was an android device.
-
IPod Touch 4 will not send mail (Comcast POP account)
I'm having an issue sending mail (Comcast) in a new iPod Touch. I sync'd it with iTunes and the mail settings are configured exactly as my iPhone (which works sending & receiving). The iPod will receive mail but will not send. It's also able to get online through our wireless network at home.
The only thing I can think of is that it required me to update iTunes to 10.1 (from 10) before it would even be recognized in iTunes. I haven't sync'd my iPhone to the updated iTunes and really am afraid to, if that's what's causing the issue.
Here is the message:
"Canot send Mail"
The connection to the outgoing server "smtp.comcast.net" failed. Additional outgoing mail servers can be configured in settings...."
I can't understand why the iPod's mail settings would be configured any different than the other 4 macs and 1 iPhone in our household.
Any ideas?Thanks for your help. After further trouble shooting I found that the iPod was conflicting with other outgoing mail servers that were listed as "Other SMTP Servers" in the mail settings. I deleted them and kept only the one that is used for this one email account.
"Authentication" continues to change from "password" to "MD5 Challenge-Response" on it's own. I don't know what that is, so I'll need to check into it to make sure it isn't an issue. -
Will not send mail to another account on my mac
Hi all im trying to send an email to a second account on my mac and it will not send can anybody advise me on how to do this ?
it says "check the developer to make sure i photo works with this version of mac os x"
-
Bought ipad4 set up to recieve my tiscali mail but will not send mail i am a novice ??
bought an ipad4 have set upto receive my mail on tiscali but will not send i am a amature it did say i might need my ipad smtp provider any thoughts
Which folder did you delete?
On the first account, assuming it's cali/cari.net
OS X Mail (Macintosh OS X)
Launch OS X mail and make sure that it is the active window on your desktop. Then do the following.
1. From the Mail menu, select (click) Preferences
2. In the "Accounts" dialog box, select the e-mail account to be SMTP-authenticated and then click the Edit button.
3. In the new Accounts dialog box:
1. Select the "Account Information" tab.
2. Under "Outgoing Mail Server:" click the Options button.
4. In the SMTP Server Options dialog box:
1. For "Method of Authentication" choose Password
2. In the "User Name" text box, enter your campus account ID.
3. In the "Password" text box, enter the password for your campus account.
4. Click the OK button to close the "SMTP Server Options" dialog box.
5. Click the OK button to close the "Accounts" dialog box.
6. Click the Close button.
More info here...
http://www.cari.net/dedicated-server-faqs.html?faq_category=Email
Maybe you are looking for
-
Batch code for running a find/replace all on multiple files within a source floder/directory
What I need is a Batch source code that will open all files in a folder/directory and run a find and replace_all query within them and then save all the files. The files were created in Illustrator and saved using the Scene7 FXG format extension.
-
We have a mac book pro and 2 i phones 4S. We both have different Apple Id's. But we would like to connect both phones to the mac book in order to update photos and itunes match. I subscribed with my apple id to itunes match and it automatically updat
-
SRW2008P - QoS Advanced Mode is greyed out
Hello, in the QoS-section of the SRW2008P web-interface I can choose only between Disable and Basic, Advanced mode is greyed out. I've created a new ACL but QoS Advanced mode isn't available. What can I do to activate it? Boot Version: 1.0.1 Software
-
Capacity leveling log showing duplicate information for Resource
Friends, Need one help. When I am looking into the Capacity leveling logs, I see duplicate information for every Resource. There is no difference in the information regarding resource utilization (before/after). For every resource we are getting this
-
[SOLVED] SABnzbd rc.d Script
I'm having trouble getting the sabnzbd daemon script to run. I'm trying to run the default one that came with the AUR but it keeps failing while running it from /opt/sabnzbd/SABnzbd.py works. Yes, I have copied over the ini file to /opt/sabnzbd/. Be