One of my database did not migrate in V11 (From 9.3) ?

Hello,
we just have migrated our hyperion server from 9.3.1 to 11.1.1
We have two applications in the same application group.
When I open shared Services, In the frame "Application Management", if I click on "Application Group" I see my Application groups list. Then I click on my Application group : It open the Modify Application Group Windows and I see two lines in the Assigned Applications section :
Myappli 1 : 9.3.1
MyAppli2 : 9.5 (that is to say V11).
I'm just astonished that one of my application is still in 9.3.1 versions ?? But I opened it with Planning V11, there were no problems ?
It's a problem because I would like to use the LCM between the two applications and it doesn't seems to work with 9.3.1.
So do you think my application is still in 9.3.1 ?
How can I migrate it in 9.5 (V11) ? Is there or is it just a Shared Services problem ? Is there any software or utility which can helps me ?
Note : The migration has been made by one of my colleagues and he doesn't remember to have choose which database to export in 9.5
Best regards

In fact I'm thinking that LCM doesn't work with my 9.3.1 application because :
In shared Services, Ive activated LCM
Administration > Configure Auditing.
(I followed your blog :)
Then if I click (in HSS) on my 9.5 application, on the right frame I see the list of available artifacts.
If I click on the 9.3 application, it displays "Loading", then I see the following message :
Error : Unable to Connect to "ESPACE", ensure that the application is up and running and the user has the appropriate rights to access this feature.
Note : I've checked that the application is running and the user is a member of an admin group.
I also tried to export by LCM date from an 9.5 application to file System then from file system to the 9.3.1 application and it's not working (no errors message but the job never stopped).
But maybe I only have a configuration problem ?
Do you have any idea ?
Thanks for your help

Similar Messages

I have a client that did not migrate to iCloud from MobileMe when the time was right.

I got control of her AppleID and got that working again. I then setup iCloud on her MBP (running 10.7.4). In Outlook, I updated her Mac mail settings to the new iCloud IMAP settings. It returned a "updating IMAP cache" and decremented her mailfolder. After it finished, I expected it to reconnect and re-download her old mail. It did not. The mail is missing. The mail folders present as a brand new account with zero history. Her iPhone is not updated yet, so she can still browse a partial record of what was in that account.
Does anyone have words of wisdom on how to recover from this or how best to get the mail to appear on iCloud?
Thanks.

As she did not migrate before 1 August the account has been deleted together with all the data in it, including emails and anything which was in the iDisk: this data is not recoverable by any means.
You say the iPhone has a cached copy of some of the emails. Don't update the iPhone to connect to the iCloud account or you will wipe them. You need to move them from being under MobileMe to being held on the phone. Unfortunately as I don't have an iPhone I can't advise on the specific process, but doubtless someone will chip in on this: you could also ask in the iPhone forum.
Once you've got them held locally you can connect the phone to iCloud, and then move them back to being on iCloud.

10.1.3 install did not migrate connections

The 10.1.3 install did not migrate my connections from 10.1.2.

Yes they seem to be ok, but I must say that our projects are simple Java apps, very little j2ee stuff, no UML, no diagrams. And it would be easy for me to have missed seeing something that did not work.
Oh yes, also the project properties/libraries did not migrate so we had to re-do all of these settings.

Will I have to reinstall all my plugins that I have in Photoshop CC into Photoshop CC 2014 since they did not migrate?

will I have to reinstall all my plugins that I have in Photoshop CC into Photoshop CC 2014 since they did not migrate?

Linking to self-contained plug-ins via a shortcut can be a good way to keep things organized, but be aware of one thing:
Many plug-ins today are not truly self-contained, but actually install additional things like DLL files into the Photoshop installation area itself (something I regard as a bad practice). What this means is even if you are to link to another place from the plug-ins subfolder under the new Photoshop CC (2014) installation area, your plug-ins may not all run properly. If they have an installer, your best approach is to use the installer.
-Noel

How can I use my old MobileMe email address if I did not migrate to icloud by the deadline?

I had a mobile me account that I did not migrate to icloud. Now when I try and set up an icloud account using the old mobileme email address, it says that address is already in use. I then try and access it but the password doesn't work and it says mobileme is closed. When I try and reset the password, it says an email has been sent to the email on file...which is an old mobileme address that I cannot access.
How can I get this email address set up in icloud?

Nice idea - I tried it but it doesn't seem to work (at least not for me).
So here are the details in case, you can spot something more I could do....
When MobileMe was live
MobileMe ID was [email protected]
AppleID (to make iTunes purchases) was [email protected]
When iCloud went live (and MM was still alive)
iCloud account was created based upon AppleID - [email protected]
iCloud would not create [email protected] as was already in use (by me)
iCloud would not merge [email protected] as iCloud does not merge
MobileMe migration to iCloud option was not taken
Deleted all data out of MobileMe account (mail, calendar, contacts, gallery)
Deleted MobileMe mail account off of all devices
When MM died
I received notification that I had not migrated my MM account
iCloud was happily working as Contacts/Calendar sharer using my AppleID of [email protected]
Weeks later on Mac running 10.8
System Preference - iCloud, already logged in with AppleID of [email protected]
Then ticked the untick Mail box
Long wait with small grey whirling cog box, stating "Loading". Eventually a BLANK message box with OK which then disappeared on a timeout.
System Preference - Mail... Re-added [email protected] (now picked up as iCloud account)
Mail - Accounts.... Re-added [email protected] BUT got message "Mail can'y connect to the account..."
So tried logging into www.icloud.com (using AppleID of [email protected] where my contacts/calendar now reside). Clicked on Mail icon and received "@me.com Address Needed" message

ORA-02041: client database did not begin a transaction

Hello All,
I am making calls from oracle 8i to oracle 9i.
First i am inserting values from 8i into a table in 9i.
secondly i am calling a procedure to send mail which again is in 9i database.
If i run the query ..the mail is sent...
if i run it for the second time i get this error
ORA-00164: autonomous transaction disallowed within distributed transaction
ORA-02041: client database did not begin a transaction
If i run it again...The mail is sent...
For every odd transaction the mail is sent and for every even transaction i get this error...Please advice me if you have any tips how i can resolve this..
Thanks,
AK

It is maybe not exaclty the same situation but this thread may help you:
http://asktom.oracle.com/pls/ask/f?p=4950:8:16455356983632477090::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:362818006460

I bought an album and one of the songs did not download completely. It shows that the song is 3:17 seconds but only got 40 secs. of it. How can i get the rest of the song back?

I bought an album from itunes and one of the songs did not download completely. It shows in the player that it is 3:17 but only plays for 40 secs. How can i get the entire song back?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

HT201240 I have a new macbook pro that did not have a disk, OS X was pre installed so how can i change the administrators name and password, it did not migrate properly from my hard drive.., so how do i

I have a new macbook pro that did not have a disk, OS X lion 7.3.4 was pre installed so how can i change the administrators name and password, it did not migrate properly from my hard drive.., now there is some mysterious administrator name and or password??

See #5
Step by Step to fix your Mac

HT3231 trouble migrating certificates. Migration assistant did not migrate them

There are two Problems.
1. Migration assistant while migrating somehow did not migrate certificates. Im not sure if all are not migrated or this specific digital certificate for my identity issues by a legitimate CA
2. When I try to manually export and later import, these Certificates and keys, they still don't work.
Here is what I'm doing
- I just replaced an SSD in place of HHD (was called MacintoshHD) where OSX (mountain Lion) was installed. I ofcourse created a recovery disk / USB and later on re-installed OSX on the new SSD through Recovery
- next I used migration assistant to migrate my old user and files etc.
- all seemed well, until, I landed on a local website, where the login is through my digital certificate. This certificate was missing. Seems migration assitant did not do its job well.

Quit mail.
Goto ~/Library/Mail/V2/MailData
Delete the follow
Launch mail, it will re-import those files.

I just upgraded Dreamweaver CS5 to CC - sites did not migrate - how to get my sites back?

I just upgraded Dreamweaver CS5 to CC - sites did not migrate - how to get my sites back?
(I'd rather not recreate them all from scratch)
PS - Go easy on me - it's my first post in this forum .
Thanks,
Rob

Seems to be different results for different people.
My sites have usually migrated automatically whenever I have upgraded. Others report the same outcome as you.
I've never traced the reasons for non-migration to a single root cause.

Scheduled refresh - Test connections settings validation failed: one or more connections did not pass the test

I copied a workbook that has a working scheduled refresh
modified the data model, added some new reports
added a new source (PQ from azure market place)
uploaded workbook to new powerbi location.
get the following error when i try to turn on scheduled refresh - this is even if i just select one data source that is still identical to the original (working) workbook
Test connections settings validation failed: one or more connections did not pass the test
Technical Details ▼
Correlation ID: ddcab6b8-ff2c-4881-9d8e-eeabbd23dff2
Date and Time: 12/12/2014 06:13:06 AM (UTC)
what's the problem?
Jakub @ Adelaide, Australia Blog

Still a problem and not just for me but other users going by the threads on here...
https://social.technet.microsoft.com/Forums/en-US/eb8682f4-9b40-456a-a7f1-45627a0f4ff0/cannot-schedule-refresh?forum=powerbiforoffice365#eb8682f4-9b40-456a-a7f1-45627a0f4ff0
Applies to all worksheets that utilise a PQ connection registered in the gateway. (my gateway is on an azure VM)
Existing worksheets receive this warning. New workbooks that utilise these connections also receive this warning
Adding a new PQ to the gateway and a new workbook that uses the new connection also receives this warning.
Every PQ connection I have receives this warning. My PQ connections are all to web resources. Most are to the workflowmax.com API, and one is to the Azure Marketplace to retrieve data for a date dimension.
Note: this does not prevent me from scheduling or triggering a refresh, and the refresh itself completes successfully. It's just a weird warning that caused confusion as it sounds like the actual refresh will fail as well seeing as the connection test failed.
Jakub @ Adelaide, Australia Blog

ERP database did not shutdown

Hi
We have Oracle ERP R12.0.6 running on single node configuration. Usually we take full offline backups on friday morning. Even after issuing the command > shutdown immediate, database did not shutdown for 2 hours as some 'Create accounting' concurrent program was running for past 44 hours. Why database did not kill this session? Is our SGA or redolog files size are not proper?
How to diagnose this issue?
Regards
Ariz

Hi
I reviewed the alert log. When this shutdown immediate was running i was watching alert log and few of them as follows:
Fri May 6 07:04:12 2011
Starting background process EMN0
EMN0 started with pid=24, OS id=1904666
Fri May 6 07:04:12 2011
Shutting down instance: further logons disabled
Fri May 6 07:04:14 2011
Stopping background process QMNC
Fri May 6 07:04:14 2011
Stopping background process CJQ0
Fri May 6 07:04:19 2011
Stopping background process MMNL
Fri May 6 07:04:20 2011
Stopping background process MMON
Fri May 6 07:04:23 2011
Shutting down instance (immediate)
License high water mark = 262
Fri May 6 07:04:23 2011
Stopping Job queue slave processes
Fri May 6 07:04:23 2011
Job queue slave processes stopped
Fri May 6 07:09:22 2011
Active call for process 2142404 user 'oramgrl' program 'oracleSCC@ebsprod'
Active call for process 995354 user 'oramgrl' program 'oracleSCC@ebsprod'
SHUTDOWN: waiting for active calls to complete.
Fri May 6 07:13:56 2011
Incremental checkpoint up to RBA [0xb28.185c2e.0], current log tail at RBA [0xb28.185c3b.0]
Fri May 6 07:23:48 2011
MMNL absent for 1206 secs; Foregrounds taking over
Fri May 6 07:34:01 2011
Incremental checkpoint up to RBA [0xb28.185d1c.0], current log tail at RBA [0xb28.185d1c.0]
Fri May 6 07:47:56 2011
Beginning log switch checkpoint up to RBA [0xb29.2.10], SCN: 3320888564
Thread 1 advanced to log sequence 2857
Current log# 2 seq# 2857 mem# 0: /scclive/oracle/db/apps_st/data/log02a.dbf
Current log# 2 seq# 2857 mem# 1: /scclive/oracle/db/apps_st/data/log02b.dbf
Fri May 6 07:48:46 2011
Completed checkpoint up to RBA [0xb29.2.10], SCN: 3320888564
Fri May 6 07:54:36 2011
Incremental checkpoint up to RBA [0xb29.3372a.0], current log tail at RBA [0xb29.4ba21.0]
Yes, you are right. Using the other session, i had issue shut abort and it has resolved the issue. We have job_queue_processes = 2 and aq_tm_processes=1.
But my concern is, i cannot add >shut abort command in my script. What is the other alternative or what parameter to be tuned? Please guide me.
Regards
Ariz

Yaourt and packer always telling me "one or more packages did not pass

Ive been using Arch for a few years now. Yaourt nor Packer have ever really failed me to this extent. most EVERY package I try to install lately with yaourt or packer fails. I constantly get the below error. Even when I download the package, get the md5sum manually and place it into the proper spot in the pkgbuild I STILL get the error. Im extremely confused and need some help. Thanks in advance for any help you can give.
-> Downloading postfixadmin-2.3.5.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 29628 100 29628 0 0 39423 0 --:--:-- --:--:-- --:--:-- 39423
==> Validating source files with md5sums...
postfixadmin-2.3.5.tar.gz ... FAILED
==> ERROR: One or more files did not pass the validity check!
==> ERROR: Makepkg was unable to build postfixadmin.

stayupthetree wrote:If the md5sum of the package I download matches the md5sum of the one inside the pkgbuild should I still receive the error?
It shouldn't happen then.
Do you get the same error when you build a pacakge by hand with makepkg ?

I bought this very nice iMac. The first time I ever use a Apple product. Can someone please tell me where the delete key is on the keyboard. I cannot think for one moment that Apple did not provide for such a key. Please help.

I bought this very nice iMac. The first time I ever use a Apple product. Can someone please tell me where the delete key is on the keyboard. I cannot think for one moment that Apple did not provide for such a key. Please help.

The delete key does a backward delete because it is the natural way to delete while typing. May not be to you and the millions of youngsters who grew up with windows computers. When you are typing and want to delete that which you just typed you are already at the end and you delete back to where you want to re-type. When you go back to a document and want to delete a selection, you have to go to the end of the selection instead of the beginning. it's just the way its always been done on macs. it takes some getting use to.
If you select text to be deleted with your mouse then the delete key deletes the selected text. same for either delete key method.
It is not convenient when you tab to fields in a form. That why fn-delete does a forward delete.
Macs have a couple of keyboards. The small "wireless keyboard" only has the (backward) delete (fn-delete forward). The larger "Apple Keyboard with Numeric Keypad" has both a Delete (backwards) key beside the = abd it has the "delete >" key in the groups with fn, home, end, Pg up and Pg dn. This keyboard is best for users who have switched from windows or are familiar with the windows forward delete.

Fail Migration: Refresh options did not Migrate

Finishing Migration from 3.1 to 4.1 Sp 2, I am facing this issues in my environment. Fail refresh options did not migrate. See screen shot below. I need some imputes on how to go about making this work.
2. Also default passwords did not migrate for some reports. I will appreciate any suggestion, Notes, Documentation or links on how I can go about this.
Thanks

Hi,
To resolve this behavior, the report must be saved for all users in version
3.x and exported again. This allows a user in BI 4.x to edit and refresh the report.
Regards,
Asma

One of my database did not migrate in V11 (From 9.3) ?

Similar Messages

Maybe you are looking for