One of the functional groups of the Logical Database "SDF" does not appear.

Hello,
I have a problem with the logical database "SDF". It has already defined 3 functional groups. When I select the buttom "display the contents" I can see all these groups with their owns fields.
The problem is that when I use a transaction which contains this logical database, in the dynamic selections I can only see two of the functional groups. The last one doesn't appear there and I don't know why.
How can I resolve my problem?
Thank you very much in advance.
Best Regards.

1 hour is the default timeout for "ExternalCommandTimeout". So, it could be that this one measure group's fact query is taking longer than 1 hour for the first record.  You can see the query in the error messages and might like to try it out
manually.  Note, a common issue is with referenced dimensions or Distinct Count when an inner join or Order By are added to the fact queries.
A simple solution might be to simply increase the ExternalCommandTimeout in the SSAS properties page.  Try 7200, and if it completes in less than 2 hours, or fails after exactly 2 hours, you know this is the issue.
Richard

Similar Messages

  • The course I did to gain OCP certification in Oracle Database 11g does not appear on the courses submission list on the website of pearson vue.

    The course I did to gain OCP certification in Oracle Database 11g does not appear on the courses submission list on the website of pearson vue, I sent an email to [email protected] from < email address deleted by moderator >, without an answer in 7 days since 01/28/2015, the email is below, the title of my course is in Portuguese.  What should I do in this case ?
    Dear Oracle.
    I am sending this email because recently I passed in the exam 1Z0-053 Oracle Database 11g: Administration II, which is the last examination necessary to acquire the OCP Certification. However, in the path to the certification I need to prove that I participated in an Oracle Official Training.
    Searching for the course on the pearson vue site, I have not found the course name on the list. So I am sending this email with the course information required for certification. I attended to the course in college FIAP (http://www.fiap.com.br/en/conheca-a-fiap/parcerias-estrategicas/), in the city of São Paulo, Brazil, from March/2010 to March/2011. Accessing the link above is possible to verify that the educational institution is an Oracle Partner. The title that I got was "Graduate in Oracle Database Management".
    In this email I attached a copy of the FIAP Certified Course (front.jpg certificate, certificate back.jpg). I’m also sending the data from my profile in the pearson vue site (Pearson VUE - My profile.pdf), and my scores in the exams for OCP certification (1Z0-051.pdf, 1Z0-052.pdf, 1Z0-053.pdf ).
    If you need any further information just let me know and I will provide.
    Please acknowledge this information and grant me the OCP certification (Oracle Database 11g Administrator Certified Professional).
    Regards.
    Italo Moisés dos Santos.
    Oracle Testing ID:  < deleted by moderator >

    Sorry, I expressed myself badly.
    When I access http://www.pearsonvue.com/oracle/course/ and start submission process  of the course, in the first step “Select the track for which you have completed a certification requirement” I selected the option “Oracle Database 11g Administrator OCP”, in the second step I selected “ILT = Instructor Led Training”,  but when I got on the third step “Which course or requirement did you complete?”  I have to choose the course name that I did, the course name that I did does not appears in that list, so I do not know which one to select, even having at the end of the form the option “Other ...(Course or requirement is not shown above. Please enter title below.)” the course name I did is in Portuguese/Brazil, the name is “MBA em gestão de banco de dados oracle” in Portuguese, which in English would look like "Graduate in Oracle Database Management".
    I sent an email to [email protected] containing the information that I found necessary to obtain certification.
    But if I have to do the process in the pearson vue site, should I put the course name in Portuguese or in English ?
    Only the email I sent is not enough ?
    Thanks for the help, and sorry for my english !

  • When I forgot my password, my husband received the instructions at his email. His email does not appear any where in my account. How do I solve this problem?

    When I forgot my password, my husband received the instructions at his email. His email does not appear any where in my account. How do I solve this problem?

    When you set up your ipad did you or your husband also set up a rescue e-mail address for you? If so, that would be why he received the instructions. Or do you sync your ipad with his computer?
    Actually in terms of it being a problem, it actually makes it easier for you to answer your security questions and follow the instuctions to get back on your ipad. Otherwise, you'll have to call Apple Support.
    To delete the rescue e-mail account pleases read this thread. (Poster's photos did not come through with the instructions.)
    https://discussions.apple.com/thread/5218141?start=0&tstart=0

  • When I sync my outlook 2013 calendar via Icloud, the changes that i made in my computer does not appear on my Iphone-4

    When I sync my outlook 2013 calendar via Icloud, the changes that i made in my computer does not appear on my Iphone-4

    If you using on a windows pc, maybe you should reinstall the iCloud Control Panel. You can download the latest version from here: http://support.apple.com/kb/DL1455?viewlocale=en_US
    If you cant see your changes on icloud.com than you have trouble between outlook and icloud. this is the part of the icloud control panel.

  • The Power Supply Fan is still working, but does not appear to respond to increased loads, and its speed cannot be increased using SMCFanControl. Any suggestions?

    Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
    When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
    Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
    After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
    But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
    Once on that path of thought, I found this article:
    http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
    I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
    Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not.  Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
    Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
    I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
    It seems that the Power Supply Fan is still working, but does not respond to increased loads.
    Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
    Cheers
    P

    Thanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
    It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
    There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
    Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
    Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem. 
    I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated.

  • When I open my video inspector, the box for image stabilization and shutter roll does not appear.  How do I get it to appear?

    When I open my video inspector and I click the Video button, no options for stabilization and rolling shutter appear.  Is there any way that I can get them to appear, so that I might use these tools?

    Tom,
    Many thanks for replying so soon.  Actually, I think I've solved my little conundrum.  I was selecting all of my clips in the timeline with the hope of running both functions.  I found that when I only selected one clip at a time, that the two options would appear and that I could select them.
    Again, Tom, thank you.
    Cheers,
    Rob

  • New tabs do not include the history icons as before.The option to show images on a page does not appear in upper right of page.

    The solution in the FAQ's is clear, but the small icon that is supposed to be showing in the upper right of a new Tab page are not showing up so that I can get the images to appear. I recently installed Java 7 and after that they had disappeared. Can you help me get them back? They are very helpful.

    You can reset the browser.newtab.url pref on the <b>about:config</b> page via the right-click context menu to the default value.
    You can open the <b>about:config</b> page via the location bar and you can accept the warning and click "I'll be careful" to continue
    You can use the SearchReset extension to reset some preferences to the default values.
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).

  • My roboform (ver 7.5.7) toolbar does not show since i updated firefox to 7.0.1 in the troubleshooting info. it shows as enabled. it does not appear in the menu of view/toolbars

    as above, when i updated firefox to 7.0.1 the toolbar for roboform disappeared. updating roboform did not fix it. it does not show up as a tool bar in the view/toolbar tab. i made sure the firefox browser option was enabled in roboform.

    Try to read raq here;
    * http://www.roboform.com/support/faq/roboform#toolbar

  • HT1657 I downloaded a movie on my I-Pad but don't have the cables to hook it up to our big screen TV.  I do, however, on my Mac Book Pro laptop.... How do I get the movie on to my laptop.  It does not appear anywhere in I-Tunes.

    I rented a movie through ITunes on my I-pad.  I'd now like to play it on my big screen TV.  I do not have the cables to connect the I-pad to the TV, but I do have the cables to connect my MacBook Pro laptop to the TV.   How do I get the movie from the I-pad to the laptop.  It does not come up anywhere on the Itunes application on my laptop.
    Tim in Md

    Transfer the movie from your iPad to your MacBook then. =)
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296

  • I would like to view the shooting mode used for an image, it does not appear when I click on "info"

    How to view shooting mode of an image in iPhoto 2011 library, it's not visable using "info"

    It depends on what you mean by shooting mode.  There's a lot of info in the Info window but it's often represented by icons.  Here's a screenshot comparing the full info window of earlier iPhoto versions with the current version:
    You might find what you're looking for in there, or not. 
    Or you can download the free EXIF Viewer (Mac) - Download, put it in the dock and drag photos from the iPhoto window onto the application in the dock to give you this window:
    OT

  • HT4623 I do not have the software update on my  IPad? It does not appear anywhere on my settings. Now what please?

    I do not have a software update located in general settings. How can Iget it back, or how can iI upgrade to ios5 or 6

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • I have tried on several occasions to install the trial version Ae in creativeI cloud and  does not appear in my account. Why?

    I have tried on several occasions to install the trial version of Ae in the creative cloud and the download don't appers in my account. Why?

    Please post your question to Adobe Creative Cloud so as to get better support.

  • I have Windows 7. The Firefox button to bring up my toolbar does not appear anywhere. I can bring up the toolbar?

    I cannot find how to access the Firefox toolbar on my Windows 7 desktop. There is no Firefox 'Button' that I see.

    Firefox either displays the Firefox Button, which in turn produces a drop down menu, or it displays the older menu toolbar.
    On windows pressing or holding the Alt key should temporarily display the menu bar,, even if the Firefox button is displayed.
    *See [[Display the Firefox button menu instead of the menu toolbar]]

  • During the upgrade all bookmarks are gone. There does not appear to be a saved file of the bookmarks.

    I have attempted to restore and import the former bookmarks, but I do not know where to look for the files. On a windows XP service pack 2 desktop computer, I upgraded from 3.6 to 15 last night and all bookmarks are gone. Please help me find where to look for them. Thanks

    Do you see any JSON backups in the bookmarkbackups folder with a file size large enough that they can contain your bookmarks?
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder
    Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can try to check and repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • Firefox function to guess while I'm typing does not appear

    Firefox won't guess while I'm typing

    See:
    *Firefox > Preferences > Privacy > History: "Remember search and form history"
    *https://support.mozilla.com/kb/Form+autocomplete

Maybe you are looking for