One of the ports on my Mac mini is no longer working.

My iphone doesn't update or sync when I connect it.  What can I do?

The ports have overload protection in case of a short or overload condition and can generally be restored by resetting the SMC.
See > Resetting the System Management Controller (SMC) only wait 5 minutes in step 3 instead of 15 seconds.
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds. 5 minutes
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.

Similar Messages

  • HT1657 Rented a movie off a gift card and can't fine the movie on my mac mini?

    Rented a movie using redemption card and cant fine the movie on my mac mini.  The money is deducted from my card and no movie

    Take the sdhc card out of the camcorder, plug it into the side port of the iMac.
    Open iMovie and import from the card. A small window should open up to let you import.
    http://www.apple.com/findouthow/movies/#import
    Hugh

  • After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

    After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

    Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
    my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

  • I forgot the password of my mac mini, i can't log on. I don't have any of the discs, so is there a way to retrieve my password?

    I forgot the password of my mac mini, i can't log on. I don't have any of the discs, so is there a way to retrieve my password?
    Any help would be greatly appreciated.
    thanks, alacr182

    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

  • Is it possible to use an iMac as the display for a Mac mini?

    Is it possible to use an iMac as the display for a Mac mini?

    iMacs late 2009 or newer can be used in Target display
    mode.  Any older, no can do.
    The only other way is via network Screen Sharing or
    some otherVPN network like solution.  The issue here
    though is that video performance will be pretty severely
    hampered.

  • One of the users on my Mac book pro, running Mountain lion finds that no changes made in last session are there next time they log on

    One of the users on my Mac book pro running mountain lion finds that no changes made in last session are there next time they log on.
    For instance, the Macintosh HD icon, is always moved so that it is almost off the screen to top left hand side of the desktop.
    None of my changes to the sidebar in the finder are there.
    My changes to the dock have reverted.
    Despite unticking the box when logging out, even though i have quit all applications, iphoto and safari are always re-opened.
    iphoto always says the library needs to be upgraded... even though i did that the last time.
    I have tried deleting ALL the files in the "Saved application state" folder in the library folder, but that doesn't seem to make any difference.
    This is on a second admin user account.
    The main user account seems to be fine.
    This account used to be in the filevault on Lion, but is not now in Mountain Lion.
    Can anyone help?
    Thanks

    The same tragic thing happened to me, not even a full two days after I bought it. I immediately powered it off, wiped it as best I could, and put it in front of a fan. I tried valiantly to get the back off, but couldn't remove all the screws. I was basically inconsolable until I realized that no matter what, my credit card insurance would cover it, since it had been less than 90 days. Fast forward 48 hours, and it seemed to run just fine. Some of the keys and the track pad were sticky, and I figured since it was covered, I might as well get it fixed. My only concern at this point was had I voided the Apple Care. I brought it in, told them what happened, said what I needed to satisfy the credit card, and they said, "We'll just swap it out for you, no problem." I was thrilled, and the Genius said they appreciated my honesty, and it was easier for all parties to just do it this way. And my Apple Care was transferred to the new machine. This was my first Mac and, needless to say, I am now an Apple devotee.

  • When i'm trying to update the new itunes my mac mini repots

    evert time i'm trying to update the new itunes my mac mini keeps repoting, dose any of u guys know y?

    Hello, How are you updating exactly... and are you sure you want to update? iTunes 11 is the worst incarnation yet as far as I'm concerned.

  • Terminate IPsec on one of the ports of HWIC-4ESW (through VLAN)

    Hi,
    It's not clear to me whether it's possible to terminate IPSec on one of the ports of HWIC-4ESW (through VLAN)? The document on the link below suggests that it supports L3 with limitations but it's short in mentioning whether IPsec is one of the limitations.
    http://www.cisco.com/en/US/customer/products/ps5855/products_qanda_item0900aecd8016c026.shtml
    Thanks.
    Regards, Archie

    Yes, you can terminate IPSec on HWIC-4ESW .
    here sample config:
    interface Vlan100
    description crypto int vlan
    ip address 10.10.100.100 255.255.255.0
    crypto map mymap
    interface FastEthernet 0/0/1
    description int for crypto vlan int
    switchport access vlan 100
    no ip address
    duplex full
    speed 100

  • What is the black circle in the front side of mac mini?

    what is the black circle in the front side of mac mini?

    so the small is power light the other black circle is IR light for an Apple remote? correct?
    mini & Apple remote what uses have together working?

  • Dual Monitors on Mac Mini Late 2014 not working on Dell S2340Lc

    Hey guys,
    Got a mac mini and using it mainly for work. Working for an ISP and no one has used macs and I've opted to be the poor sucker that gets to deal with old people that don't know how to mac very goodly.
    I have two Dell S2340Lc monitors. I have one connected up via HDMI and that works perfectly fine. I turned off the mac, I plugged in Monitor 2 with a MiniDP/Thunderbolt to HDMI adapter, powered on the mac and whilst it was booting, it had the Apple logo and the loading bar on the Dell display plugged in to the thunderbolt to hdmi adapter and then once it loaded up the log in screen, it went to the HDMI display. I logged in and in the displays section, the monitor plugged in to the thunderbolt to hdmi adapter isn't being detected, however I can plug it in to a Samsung 55 Inch Smart TV and it works just fine. I can set up dual monitors between the TV and the monitor in HDMI, but the Dell S2340Lc will only work with a HDMI cable into the HDMI port on the mac mini and will not work through the thunderbolt to hdmi adapter. On the display it just says that there is no signal coming from the computer.
    Just wondering if any of you apple gurus had any ideas as to why this isn't working?
    Thanks!

    What if you switch monitors?
    What happens if yo only have the Thunderbolt>HDMI>Dell monitor connected?
    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Call Apple. You get 90 days or free telephone support
    Complimentary Support (USA)

  • I dont recall when I have been more frustrated....  the "loops" I am in on the web for support are endless.  After downloading Yosemite on my Mac my CS6 no longer works.  On your support web site you state the following for downloading and installing prev

    I dont recall when I have been more frustrated....  the "loops" I am in on the web for support are endless.  After downloading Yosemite on my Mac my CS6 no longer works.  On your support web site you state the following for downloading and installing previous versions of apps, such as CS6 " 1. open CC for desktop and go to the apps panel (no link is provided so I explored until I could download a trial version of "application manager" as that was required.  When I attempted to open it to download "Previous Versions" I could not.  I have my license number, my CS6 will not open in Yosemite and after over 2 hours I am really frustrated....  Rich@

    When I go to that link, download and then attempt to install I get the message "Webe encountered the following issues, Installer failed to initialize.  Please down load Adobe Support Advisor to detect the problem"  I then select the link "get adobe support advisor" that takes me to a site that describes a better support link since the one I have been sent to is no longer available.  I then go to that site and am told to go to CC for desktop apps, that requires me to download CC...  I don't want CC.. just want to have my CS6 PS work again....  so frustrating...

  • Hi Thanks for 4.0. It runs much faster on my Mac, however, it no longer works to zoom in all of my web pages. I use to be able to use my finger pad to increase the size of all of all pages. Thanks again.

    Hi Thanks for 4.0. It runs much faster on my Mac, however, it no longer works to zoom in all of my web pages. I use to be able to use my finger pad to increase the size of all of all pages.
    Thanks again.
    PS Are you working on a version for the iPad and iPhone with Add Blocker? That would be great!

    Here are some zoom add-ons which might provide a workaround:
    [https://addons.mozilla.org/en-US/firefox/search/?q=image+zoom&cat=all&x=0&y=0 Image Zoom]
    As regards your question about iPad and iPhone, you'd be better off posting that question here: [https://forums.mozilla.org/addons/ Mozilla Add-ons Forum]
    P.S. ''Apologies for not responding earlier''.

  • TS1307 The port I'm using is 465. Not working. Just need the setting for outgoing mail. Incoming is still working.

    The port I'm using is 465. Not working. Just need the setting for outgoing mail. Incoming is still working.

    "Well Known" TCP and UDP ports used by Apple software products
    http://support.apple.com/kb/TS1629?viewlocale=en_US

  • My Contracted SIM is for an android phone, but when i put the sim in an iphone my 3g no longer works?..

    My Contracted SIM is for an android phone, but when i put the sim in an iphone my 3g no longer works?.. Is it because my 3g is only active on the android os and not the ios platform? Texts, Calls and Wifi work fine but the 3g doesn't work. My phone only shows 'GPRS' in the top left corner. Also I get a message come up saying "Could not activate mobile data network. You are not subscribed to a mobile data service".
    Any advice would be great.

    Hi hexonxonx, I'm on o2. Thanks for your advice. You are right. All I had to do was change one of my APN settings to mobile.o2.co.uk and reboot my phone and this sorted it out straight away! Thanks again. Much appreciated . I was thinking I was going to have to go back to an android phone to use my 3g again but this eliminated that need. Thanks.

  • The Command Get-ADUser -Identity username -Properties * No Longer Works Due to a Bug in PowerShell 4 and Win8-1 Pro

    The 'Command Get-ADUser -Identity <username> -Properties *' No Longer Works Due to a Bug in PowerShell 4 and Win8-1 Pro
    It produces the following error:
    Get-ADUser : One or more properties are invalid.
    Parameter name: msDS-AssignedAuthNPolicy
    At line:1 char:1
    + Get-ADUser -Identity ********** -Properties *
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidArgument: (**********:ADUser) [Get-ADUser], ArgumentException
        + FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.ArgumentException,Microsoft.ActiveDirectory.Management.Commands.GetADUser
    This is already documented in these forums:
    1. http://social.technet.microsoft.com/Forums/systemcenter/en-US/1bf9568e-6adc-495d-a37c-48877f86985a/powershell-40-and-the-activedirectory-ps-module?forum=w81previtpro
    2. https://connect.microsoft.com/PowerShell/feedback/details/806452/windows-8-1-powershell-4-0-get-adcomputer-properties-bug
    Unfortunately, in typical style, Microsoft have archived number 1 without bothering to respond with advice.  Can someone in Microsoft please advise your customers here if this is being investigated and of any available workaround or fix ?
    -- huddie "If you're not seeking help or offering it, you probably shouldn't be here."

    Did you consider using one of the "workarounds" below to run an existing version of the AD Module for PowerShell under a specific PowerShell version:
    a. #require -version 3.0    (in ps1 script)
    b. powershell -version 3.0
    Thank you for sharing with us if this helps.
    Desmond, did you miss my reply below ?  I still haven't heard back from you:
    >> "Desmond,
    >> 
    >> Thanks for your quick response.
    >> 
    >> I'm running this just as a command, not in a script:
    >> 
    >> Get-ADUser -Identity <username> -Properties *
    >> 
    >> When I try to run powershell
    -version 3.0 first, then run the above command, it still fails with the same error.  When I then run Get-Host,
    the version still shows as 4.0 so maybe there's more I need to do to launch a 3.0 host.  Anyway, from what I've read it seems your command is more aimed at script compatibility.
    >> 
    >> Can you help ?"
    -- huddie "If you're not seeking help or offering it, you probably shouldn't be here."

Maybe you are looking for

  • Activate a Midlet from an Applet

    Hi, I am trying to activate a Midlet from an Applet? Is this possible in any of the latest J2ME releases? Using SATSA I am able to send APDU commands from the Midlet to the Applet and start a scenario where my Applet and Midlet exchange information.

  • Two-layer BPM with Phase Activity not working in SOA Suite 11gR1

    When we follow the tutorial in a oracle manual on using two-layer business process management (BPM) we get the following error on runtime: [2010-09-01T18:08:54.948+02:00] [soa_server1] [ERROR] [] [oracle.soa.services.rules] [tid: orabpel.invoke.pool-

  • Sending mail to a contact group with a numeric name

    Hello! I have a problem when sending mail to a contact group. The contact group is named "1234", and in Mail the autocompletion of the address is not performed successfully. However, if I rename the group to "A1234" then it all works. Sounds like a b

  • Strange problem while building a secondary index.

    Hi, I have a strange problem in creating a secondary index which is a part of primary data. I tested my program and a working sample program My data scheme looks like:    Key = unique string    Data = structure {                     time_t timestamp;

  • Director and SAP

    Hi Has anyone any experience in integrating Director and SAP Cheers Photman52