One of the posts that I responded to had the date in a different language. Is this normal: "Posted 2010 Mumu-Ɔpɛnimba 15 08:37:44 -0800:" I would have thought my Mozilla Firefox Options Settings to "English" would have translated it? Am I correct?

[http://i610.photobucket.com/albums/tt190/Mccc/Date.jpg]

The language the dates are displayed in depends upon the link. For example with this thread, to display dates in English the link is https://support.mozilla.com/en-US/questions/770762
It appears that you accessed the thread that you originally replied on with it set to the Akan language, this thread in Akan is https://support.mozilla.com/ak/questions/770762
This can happen if the post was found using a search engine. For some languages the whole site will display in the different language, not just the dates.

Similar Messages

  • HT1473 I have two separate iTunes libraries on different computers and I would like to compact into one. But I cannot without completely erasing one of the libraries. How can I do this without deleting anything?

    I have two separate iTunes libraries on different computers and I would like to compact into one. But I cannot without completely erasing one of the libraries. How can I do this without deleting anything?

    Copy the content from one computer to another and import the media into iTunes.
    Any playlists, playcounts, etc on the computer the content is being moved from will be lost.

  • Send 102 bit data through the LPT port??I have to send 102 bit to my interface board using the LPT port, through one of the data line and be able to read data from the input line, I don't know how to realize such a task.Thanks

    Let me describe you the program I have to write:
    I have to send 102 bit serialy using one of the data line of the LPT port to a device and be able to read back data sent from a device register throug one one of the input port pin for instance pin 10 of a DB25, and synchronize the transmission by the PC clock(for write and read). If fact I am using 5 output control(D0...D4) signal from the LPT port, RST, TXD, CLK, CE,TEST, one input data RXD (pin10)
    So the program should work in normal mode (write data, read data), and test mode (use the write p
    rocedure). Since I am quite new in Labview I am little lost and I need some support or exemple that use a way to send more than 32 bit via one data line(in my case 102bit= 8 bit COMMAD(MSB)+88 bit SPI DATA+6 bits CRC(LSB)) and be able to read them back, place them in the register and be able either to monitor or modify them.
    I know that there are plenty of exemple but if I can gain time by being helped it would be great.
    Can you please advise?

    Hi Beni,
    find attached a SPI.vi - minor changed from one of
    my typical SPI's (LabVIEW 7.1). With some simple changes it will fit to your application.
    The only thing you need to do - prepare
    the bits for the input-array.
    If you need some more comments - find one of my email
    adresses in documentation of this vi.
    Regards
    Werner
    Attachments:
    102bit_SPI.zip ‏90 KB

  • When trying to import videos off of a CD I continually get error code -36 on one of the videos. How can I fix this?

    When trying to import videos off of a CD I continually get error code -36 on one of the videos. How can I fix this?

    Contact Apple and request a 10.4 or possibly a 10.5 distribution disk for this system, if you've not obtained that DVD disk from the seller. 
    Boot and use that distribution disk to wipe the hard disk via Disk Utility, and to then reinstall OS X. 
    Best to start with a fresh installation of OS X, as that'll provide the default environment and not something that's been customized and extended by the previous owner.
    The last OS X version that was supported for most PowerMac G5 systems was 10.5.8, and that would be preferable — if your Mac supports that.
    If you're not sure which Mac you have, then use the  > About This Mac from the menu and request more information on the system.  You're looking for a model number listed there, and that'd be something like PowerMac7,3 or PowerMac11,2 for a ~2005-vintage PowerMac system.  Whatever model number you have can then be used to determine the general specs for the configuration, and what the last version of OS X that was supported for the system.

  • So I have just had my potentially duff hard drive replaced and uploaded my data from time machine to discover that pages is now speaking to me in a different language. The keyboard has been selected as UK during setup. How do I get back to qwerty?

    So I have just had my potentially duff 1Tb hard drive replaced by apple and uploaded my data from time machine only to discover that pages is now speaking to me in a different language. The keyboard has been selected as UK during setup. Any idea how I can get back to qwerty?

    roxandiv wrote:
    pages is now speaking to me in a different language.
    What exactly are you referring to?   Are the menus or templates for Pages in a different language?  Does something strange appear on the screen when you type?
    Could you perhaps use the Camera icon here to post a screenshot of what you are seeing?
    To make sure you have the right keyboard, go to system preferences/language & text/input sources and make sure that only the box for US or British is checked (and that the box for French or German or anything else is not checked).

  • In InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to

    This may be a basic question... but in InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to determine what word count we can fit in, and c) how to do it in a table? Thanks!

    Set your ruler increments to pixels Preferences>Units & Increments. You can fill the text box with placeholder text Type>Fill with Placeholder text and get a word count from the Info panel with Show Options turned on from the flyout.
    From the Transform panel you can set a text box's width and height

  • I am doing one Labview project. so my project is about design a interface in labview which one collect the data from keithley 2400 via GPIB connection.

    i am doing one Labview project. so my project is about design a interface in labview which one collect the data from keithley 2400 via GPIB connection. any suggestion please

    Your first task should be to just be able to send commands to the instrument.  Do as Dennis suggested and download the drivers for the instrument and get familiar with them.  Build up small VIs that do little tasks with those drivers so you can get used to them.  Then worry about your main interface.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • ODI 10g Load table havfing XMLTYPE as one of the data type

    I'm trying load data from source to target(Both Oracle) same table. The table has XMLTYPE as one of the data type. I can load the data, if I exclude that one particular column.
    Is there any way to load the data from that XMLTYPE column as well? Please provide your input.
    Source and traget has the same table structure.
    Version: ODI 10G
    below is the sample table structure.
    CREATE TABLE APPLICATION
    APPLID VARCHAR2(20 BYTE) NOT NULL,
    JOBTYPE VARCHAR2(20 BYTE),
    USRID VARCHAR2(20 BYTE) NOT NULL,
    APPDOC      SYS.XMLTYPE,
    APPLSTATUS VARCHAR2(30 BYTE),
    APPLDATE DATE
    Thanks

    Hi Pankaj,
    Remember that 1 character is not equal to 1 byte anymore while numbers/hexadecimals are still.
    So, if you have structures that are a mixture of characters and integers/hexadecimals etc, you can not move data from structure to structure as easily as before.
    In code you mentioned:
    LOOP AT L_TAB INTO L_REC.
    APPEND L_REC TO LIST_TAB.
    ENDLOOP.
    Avoid moving directly from L_REC to LIST_TAB. You can try to define a work area (WA_TAB) for LIST_TAB and use a MOVE-CORRESPONDING from L_REC to the WA_TAB. Then append WA_TAB.
    If the field names from L_REC do not match the field names in LIST_TAB, you can manually move each field value to the correct field in the work area.
    Reward points if this solves your issue

  • How to fill the data of two different tables into one?

    Hi Experts,
    I have two tables named CDHDR and CDSHW(structure). I have extracted the  data from these two tables through two function modules named CHANGEDDOCUMENT_HEADER and CHANGEDOCUMENT_POSITION. Now I have the data in to different tables.
    These two tables neither has relationship with each other through any field nor have any field which exist in both. Can anyone tell me in this case what should be the process to take the data of both the tables into one table. How can I match the record of one table to another?
    thanks a ton in advance.
    Edited by: Moni Bindal on Apr 28, 2008 4:16 PM
    Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:42 PM

    Hye Bindal,
      without a relation, it is not possible to club the data of 2 internal tables. More over it depends on the requirement as to y u should club to non related quantities in an internal table.
    if you wish to do so, one thing is it has internal table which includes the strucute of the 2.
    data: begin of ty_out,
              first type first_structure,
              second type second_structure,
             end of ty_out.
    data: itab type standard table of ty_out.
    data: wa type ty_out.
    loop into it1 into wa1.
    move corresponding wa to wa1.
    append wa to itab.
    endloop.
    loop into it2 into wa2.
    move corresponding wa to wa2.
    append wa to itab.
    endloop.
    now the internal table itab will have all the contents of it1 and it2.
    <REMOVED BY MODERATOR>
    Thanks,
    Imran.
    Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:43 PM

  • While working on an app I lose all the data and all downloaded app.is this a common problem?

    while working on an app I lose all the data and all downloaded app.is this a common problem?

    Apologies. The second link I gave you shows an ipad so I thought it would be more helpful. If you scroll part way down, you'll see an ipad. I know that most say it's mainly an IE issue, but there is mention of turning off javascript.
    In the link below Apple claims that it blocks third party tracking if you turn on 'private browsing.' But is the site you're dealing with actually third party browsing? And if it's already embedded on your ipad, will clearing history, cookies and data take out your google issue? I know that when I do this, within minutes a long list of sites never visited are back on in 'website data'. Also, consider turning off java script. On 'accept cookies' click on never.
    To see all this on your ipad, go to settings, then click on Safari. On the right, try turning off 'accept cookies.' Turn on private browsing'. Keep 'block pop-ups' on. Personally, I would try one thing at a time. For example, first turn on private browsing and see what happens when you open the scrabble app.
    Then go to 'advanced' and look at website data. You possibly never visited many of those sites.
    Apple's take on it is that they're protecting Safari users, whether it's a mac or an ipad.
    http://www.apple.com/safari/
    This is technical info on what's going on but it doesn't seem to offer solutions.
    http://cyberlaw.stanford.edu/blog/2012/02/safari-trackers
    Hopefully, someone will read your post and have a simple solution.

  • Stage tab delimited CSV file and load the data into a different table

    Hi,
    I pretty new to writing PL/SQL packages.
    We are using Application express for our development. We get CSV files which is stored as a BLOB content in a table. I need to write a trigger that would get executed once the user the uploads the file and parse thru the Blob content and upload or stage the data in a different table.
    I would like to see if there is any tutorial or article that could explain the above process with the example or sample code to do the same. Any help in this regard will be highly appreciated.

    Hi,
    This is slightly unusual but at the same time easy to solve. You can read through a blob using the dbms_lob package, which is one of the Oracle supplied packages. This is presumably the bit you are missing, as once you know how you read a lob the rest is programming 101.
    Alternatively, you could write the lob out to a file on the server using another built in package called utl_file. This file can be parsed using an appropriately defined external table. External tables are the easiest way of reading data from flat files, including csv.
    I say unusual because why are you loading a csv file into a blob? A clob is almost understandable but if you can load into a column in a table why not skip this bit and just load the data as it comes in straight into the right table?
    All of what I have described is documented functionality, assuming you are on 9i or greater. But you didn't provide a version so I can't provide a link to the documentation ;)
    HTH
    Chris

  • I had my password in a different language and i deleted the language by mistake and can't unlock my ipod

    I had my password in a different language and i deleted the language in my key boards and can't unlock my ipod. What do I do? I tried to contact online support but there is no topic that this would fit in.

    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up    
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • I was trying to purchase a book and a popup said that my Apple ID had beed disabled. How do I fix this?

    I was trying to purchase a book and a popup said that my Apple ID had beed disabled. How do I fix this?

    Hello ashleymls96,
    Thank you for contacting Apple Support Communities.
    You can use the following article to reset your password:
    Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
    http://support.apple.com/kb/TS2446
    Regards,
    Jeff D.

  • Hello, I have a macbook pro 15 ", it has 4GB of memory, when I try to run a video in full hd hd in the system it gets slow. Is this normal?

    Hello, I have a macbook pro 15 ", it has 4GB of memory, when I try to run a videoin full hd hd in the system it gets slow. Is this normal?

    Glauco Neves wrote:
    Where can I find this new version?  Thank you
    10.7.4 is the latest update of MacOS X Lion. Run Software Update in System Preferences.
    Since you state to run 10.7.2, Software Update will have to use the combo updater to bring it up to 10.7.4. This will entail a large download that will take some time so have patience. I suggest the following steps:
    Restart the Mac, press and hold Command-R to start up in Recovery Mode (More info: http://www.apple.com/macosx/recovery/ ).
    If needed, select the desired language to move to the next screen (only if it is the first time in Recovery Mode).
    Select Disk Utility in the bottom of the list, Continue...
    Choose the hard disk drive device on the list ( xxx.xx GB APPLE HDD ...) by clicking on it.
    Click on Repair Disk button, wait for it to finish.
    Choose the Lion boot volume, Macintosh HD, by clicking on it.
    Click the Repair Disk button, wait for it to finish. If any errors are found and the process does not end with a "The volume Macintosh HD appears to be OK." message, click on Repair Disk again.
    Click on the Repair Disk Permissions button. This will take awhile to finish.
    Quit Disk Utilities, choose Restart from the menu.
    Now run Software Update in System Preferences, choose to apply all missing updates. This will take quite awhile, depending on how fast your Internet connection is. The Mac will need to be restarted when the updating is done.
    Run Software Update again to have Safari updated to the latest version. This is necessary since Safari 5.1.7 needs OS X 10.7.4 to be running already.

  • Photoshop v7.0 I get the error "missing or invalid personalization information"  This used to run, I'm now on Windows 7 64 bit.  Anyone have any ideas please?  Thanks.

    I get the error "missing or invalid personalization information"  This used to run, I'm now on Windows 7 64 bit.  Anyone have any ideas please?  Thanks.

    Hi,
    If my memory serves me right (it’s some while since I changed and I have not used Photoshop for some years…) I was running it on XP.  I upgraded to Win 7 on  a new machine but ported across files, programmes etc.  I cannot recall if Photoshop ever ran on Win 7.
    I have tried to reinstall but the CD is warped and despite applying pressure to it neither of my drives likes it.  I have Photoshop 7 on my third hard drive, a portable drive, which came from the XP machine.
    Sorry, long-winded but I hope it helps.

Maybe you are looking for