One of the recipient addresses is invalid?
every time that i open mail on my iphone it tells me that one of the recipient addresses is invalid. ????
there is a message being sent how do i get to it to alliviate the problem?
First off, check your sent for messages being sent out. Delete it if you can, and the message should stop appearing when you first open Mail.
Next, I'm assuming this started happening after the 2.0 update? This seems to be the case for this issue. I have ran into this twice now and both were after the 2.0 update.
Assuming you updated, try to remember if you had to reenter your email information manually on the iPhone again. If you did not, then it may have been backed up and re-synced to your iPhone automatically. With the current bugs, it'll be best to set up the account manually.
+NOTE: Steps 1-4 may not be necessary. You may try step 5 first and if it doesn't work, perform the entire process.+
The fix I found:
*1. Delete the account on the iPhone.*
Before doing this, be sure you know your settings to recreate this account. If it is one of the prebuilt email addresses (Gmail, AOL, Yahoo, MobileMe, etc), the account settings won't be an issue. If you are using a POP or IMAP account other than the ones built in, contact your email provider for account settings, or, alternatively, look in the Mail Settings on the iPhone before you delete it or online. Some settings include incoming and outgoing server host names, port numbers, whether SSL is used, and authentication type. Don't forget your username and password too!
This may help some of you.
http://www.apple.com/support/iphone/mailhelper/
*2. Once deleted, recreate account*
Enter Settings > Mail, Contacts and Calender > Add Account
*3. Once created, test to see if you receive mail.*
If not and you did before deleting the account, look into your settings, something may have been missed
If it works, continue to the next step.
*4. Check to see if issue still exists.*
Compose a new message AND reply to one
If it works, great. If not continue on.
*5. Enter your Username and Password for your OUTGOING MAIL SERVER*
This is the step that fixed the issue both times when I ran into them.
Go into Settings > Mail, Contacts and Calendar > +Your Account+ > Tap the Outgoing (or SMTP) Server > Tap Primary Server > Enter Your Username and Password in the Optional fields.
Username is usually the first part of your email address (everything before the @) or it can also be your entire email address. Password is the one you'd use to log into its webmail.
Usually, these "optional" fields are truly optional. In this case, having them filled in fixed the issue.
Actually, fixed it twice. Lastly, a hard reset (hold home and power button until screen goes completely off, ignore slide to power off) and a restore are other two options at the end.
Hope this helps you folks.
Good Luck,
Tony
Similar Messages
-
Getting "Cannot Send Mail - One of the Recipient Addresses was Invalid"
Mail was working fine under version 1. Upgraded my original iPhone to version 2 and couldn't send emails. Get "CANNOT SEND MAIL. ONE OF THE RECIPIENT ADDRESSES WAS INVALID. OK" message whenever I attempt to respond to an incoming email or when sending a new email. Sometimes "Sending" progress bar goes all the way to the end, but I still get this error message and mail is NOT sent. This is still the case after I upgraded to 2.02 HELP!
I have since removed the email account and added it again. I tried this several times and came to the realization that the Apple iPhone software was not setting the account up properly. I saved the account even though I was warned by the software that it was not working properly. I then went ahead and carefully edited all the settings and made sure that they matched EXACTLY with those in MS Outlook. I also set Authentication to Password on both incoming at outgoing servers.
I finally got it working. What a pain!! -
"One of the recipient addresses was invalid...
I can send a new email, but when I try to reply to any email, I get this error message and the email just sits in the outbox.
I get this same message even with new mails. And the recipient addresses are all valid. This suddenly started to happen after a long time of everything working just fine.
Would love to find an answer to this problem. -
Major mail problem: "One or more recipient address was invalid"
Hello,
I had my iPhone 3G for 2 weeks now. I have been experiencing some major e-mail problems - basically, I cannot send e-mails to anyone except myself. When I type in my address (the same one that I send an e-mail from) it all goes well. When I type any other valid one, it does not get through. I keep on getting a pop-up message "Cannot send mail: One or more recipient address was invalid" - even though the addresses *are, actually, valid*.
Does anyone know how to solve this problem? Happens both with usual e-mails and with pic forwarding. Many thanks for your help.
Best,
DynamitriI'm using a POP account. Still - I can send to myself, can't send anywhere else.
Might try deleting the account and then configuring it again. Hope it helps.
And yeah, I have the latest software.
Best,
D. -
Can't send mail due to "One of the recipient addresses was incorrect" error
I have my iPhone set up with two mail accounts: my personal Yahoo account and my work e-mail account ([email protected], for example). I can send/receive email fine with my personal account, but for my work account, I cannot send any mail to any email addresses that are not people at my work with the same domain name (I can send to [email protected], but not [email protected]).
I thought the problem had to be with my settings, but I compared my settings on the iPhone with how I have my work email set up in Thunderbird and even Apple Mail. They're the same! So I'm at a loss. Any ideas?
Thanks!!More than likely, yes, but since a MobileMe account is accessed as an IMAP account, when accessing the account with an email client you have the option to store messages on the server or locally on the hard drive or device. If your account has been compromised and someone is accessing the account with an email client on their computer, they could choose not to store the sent messages on the server so you wouldn't see them.
-
E-mail error: Cannot Send Mail: The sender address was invalid
I can receive e-mail but cannot send it. Everything goes to my outbox. I did not change any settings. Nothing has changed that I know of. For months I could send e-mail -- now I cannot. I even e-mailed myself, and it says the sender address is invalid. Can anyone help? Thanks!
The "Recipient addresses are invalid" message is misleading.
Most ISP's don't allow you to send email through their SMTP server unless you are A) on their network (e.g. connected via wi-fi to a cable connection provided by your ISP) or B) you authenticate to their SMTP server.
On Blueyonder here in the UK (my ISP), you can send via their SMTP server from the iPhone over 3G as long as you authenticate to it. I setup my Mac mail to authenticate on outbound email sent via smtp.blueyonder.co.uk and it works fine. I then synced the mail settings to my iPhone and it works fine (although a little slow to send).
Alternatively your cellular provider usually runs their own SMTP server to which you will also have to authenticate, and you can send through it. For the iPhone in the UK O2 are the exclusive provider, and they have the smtp.02.co.uk gateway. -
I am trying to send an emails to Italy. When I click send I get a message ( Non-ASCII characters in the local part of the recipient address). [email protected] is one of the email address I am trying to send to. My other email address' work OK. I have sent emails to these Italian address before with no problem.
Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates. -
Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
at coherence::component::util::Initiator::openConnection
at coherence::component::net::extend::PofConnection::open
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::io::IOException: socket disconnect
at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
at coherence::net::Socket::readInternal
at coherence::net::Socket::SocketInput::read
at coherence::io::BufferedInputStream::fillBuffer
at coherence::io::BufferedInputStream::read
at coherence::component::util::TcpInitiator::readMessageLength
at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
at coherence::component::util::Daemon::run
at coherence::lang::Thread::run
on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"We are facing same issue. Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
<protocol>Tls</protocol>
<local-certificates>
<certificate>
<url>c:\Cert\</url>
<password>password</password>
<flags>DefaultKeySet</flags>
</certificate>
</local-certificates>
</ssl>
thanks
Bala -
Exchange 2013 enable forwarding option does not save the recipient address
Hi,
I am having issue on Exchange 2013 that unable to save forwarding recipient address in mail flow option. While browsing on Forward address and select recipient address it shows the blank and do not show the address.
Can anyone suggest how to save the recipient address in mail flow.
ThanksHello Nithyanandham,
I solved the issue that it is IE browser issue. I logged in with FireFox and access the mail flow and entered the recipient forwarding address it saved and email now
sending to the forwarding address.
Thanks for your kind support and help -
The dreaded: The network address is invalid error - SQL 2014 Cluster on Server 2012 R2
Trying to setup an SQL 2014 Failover cluster on Windows Server 2012 R2 (two nodes). Every time I get to the assign a SQL server Network Name piece of the setup I get the following error message:
The given network name is unusable because there was a failure trying to determine if the network name is valid for use by the clustered SQL instance due to the following error: 'The network address is invalid.'
This happens whether I use the Advanced cluster installation procedures or the normal installation. I have tried the following based on anything I can find on the web:
1) Removed the clustered MTDTC role.
2) Deleted the NIC Team (4 1GB NICs). Deleted all but 1 NIC from the server device manager.
3) Shutdown the second node.
4) Lanman Server registry change posted someplace on this forum that does not stick on reboot
None of the above, separately or in combination, has worked to allow SQL 2014 to be installed as a cluster role.
There is no virtual machines added to the cluster. This is not a VMware installation. It is straight Windows 2012 R2 with a two node cluster (setup identically).
Any ideas, suggestions, comments?
Thanks,
-AndrewHi Alberto and Lydia,
The cluster was verified, there are only warnings related to a lack of redundant network paths as the cluster verification doesn't recognize a team of 4 nics are redundant. I updated AD to include the permissions detailed in the link Lydia provided,
still no go.
I'm not sure how to attach the installation logs to this message forum other than as text in the message, so here you go:
Summary:
Overall summary:
Final result: User cancelled
Exit code (Decimal): -2068380094
Exit facility code: 1207
Exit error code: 1602
Exit message: User has cancelled.
Start time: 2015-03-24 09:55:25
End time: 2015-03-24 10:01:04
Requested action: CompleteFailoverCluster
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Replication: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for FullText: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for DQ: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for RS: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for IS: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Conn: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Adv_SSMS: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for BC: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for SSMS: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for ComponentUpdate: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for SNAC: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for SNAC_SDK: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Writer: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for BOL: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Next step for Browser: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Cluster properties:
Machine name: SUN-PIE-CS-01
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER Database Engine Services
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER SQL Server Replication
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER Data Quality Services
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSRS12.MSSQLSERVER Reporting Services - Native
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014
Management Tools - Basic 1033 Standard Edition
12.0.2000.8 No Yes
SQL Server 2014
Management Tools - Complete 1033 Standard Edition 12.0.2000.8
No Yes
SQL Server 2014
Client Tools Connectivity 1033 Standard Edition
12.0.2000.8 No Yes
SQL Server 2014
Client Tools Backwards Compatibility 1033 Standard Edition 12.0.2000.8 No
Yes
SQL Server 2014
Integration Services 1033 Standard Edition
12.0.2000.8 No Yes
Machine name: SUN-PIE-CS-02
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER Database Engine Services
Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER SQL Server Replication
Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER Full-Text and Semantic Extractions for Search
Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER Data Quality Services
Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSRS12.MSSQLSERVER Reporting Services - Native
Standard Edition 12.0.2000.8 No Yes
SQL Server 2014
Management Tools - Basic 1033 Standard Edition
12.0.2000.8 No Yes
SQL Server 2014
Management Tools - Complete 1033 Standard Edition 12.0.2000.8
No Yes
SQL Server 2014
Client Tools Connectivity 1033 Standard Edition
12.0.2000.8 No Yes
SQL Server 2014
Client Tools Backwards Compatibility 1033 Standard Edition 12.0.2000.8 No
Yes
SQL Server 2014
Data Quality Client 1033 Standard
Edition 12.0.2000.8 No Yes
SQL Server 2014
Integration Services 1033 Standard Edition
12.0.2000.8 No Yes
Machine Properties:
Machine name: SUN-PIE-CS-01
Machine processor count: 16
OS version: Windows Server 2012
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER Database Engine Services
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER SQL Server Replication
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSSQL12.MSSQLSERVER Data Quality Services
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014 MSSQLSERVER MSRS12.MSSQLSERVER Reporting Services - Native
1033 Standard Edition 12.0.2000.8 No Yes
SQL Server 2014
Management Tools - Basic 1033 Standard Edition
12.0.2000.8 No Yes
SQL Server 2014
Management Tools - Complete 1033 Standard Edition 12.0.2000.8
No Yes
SQL Server 2014
Client Tools Connectivity 1033 Standard Edition
12.0.2000.8 No Yes
SQL Server 2014
Client Tools Backwards Compatibility 1033 Standard Edition 12.0.2000.8 No
Yes
SQL Server 2014
Integration Services 1033 Standard Edition
12.0.2000.8 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: \\sun-server2\data\Software\Microsoft\SQL 2014\x64\setup\
Installation edition: Standard
User Input Settings:
ACTION: CompleteFailoverCluster
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASSERVERMODE: MULTIDIMENSIONAL
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
CONFIGURATIONFILE:
CONFIRMIPDEPENDENCYCHANGE: false
ENU: true
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP: SQL Server (MSSQLSERVER)
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: sun-pie-mt-01
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSQLDATADIR: <empty>
INSTANCENAME: MSSQLSERVER
QUIET: false
QUIETSIMPLE: false
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
UIMODE: Normal
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150324_095524\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Setup Support Files
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: SQL Client Connectivity
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: SQL Writer
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: Documentation Components
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature: SQL Browser
Status: Failed: see logs for details
Reason for failure: Setup was canceled for the feature.
Next Step: SQL Server Setup was canceled before completing the operation. Try the setup process again.
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150324_095524\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CancelException
Message:
User has cancelled.
HResult : 0x84b70642
FacilityCode : 1207 (4b7)
ErrorCode : 1602 (0642)
Stack:
at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.<>c__DisplayClasse.<ExecuteActionWithRetryHelper>b__b()
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate) -
IPhone 3G Cannot Send Mail. The sender address was invalid.
All of a sudden, I cannot send mail. I get the message "Cannot Send Mail" The sender address was invalid.
I have reset the phone in hopes of resolving the problem. That did not work.
The mail that I'm sending to IS a valid address; I'm trying to RESPOND.
Please help.The configuration and use of any outgoing server address (SMTP) may not be supported due to several factors including, but not limited to, the inability for the outgoing server (SMTP) to authenticate users (whether by IP or username/password) that are not directly connected to that Internet Service Providers(ISPs) network.
This is usually your HOME wi-fi and you are not connected to it because you are on your iPhone away from the house. This is mainly done to prevent unsolicited users from sending SPAM via the ISP's servers.
An alternative is to use ATT SMTP Server (for US) when you are on the 3G or data network for the carrier and not on your home wi-fi. So enable ATT SMTP server under Other SMTP servers under your Mail's account settings on the iPhone.
If you are interested you can obtain that information directly from the email provider. This article has a great temple that you can use to ask all necessary information from the provider including "If you use your ISP’s own email service (instead of a third-party such as Gmail), sometimes it may not work if you use another Internet access point, such as a cafe with wireless Internet. Ask your email provider if the settings they give you will work on other networks."
What to ask if you're having issues sending, receiving, or configuring Mail
http://support.apple.com/kb/HT1277 -
Hey,
Got a new Iphone, my icloud doesn´t work. How can I delete it and make a new one? The email address is wrong so I can´t varify it.
Can´t download apps, because it´s wrong. What can I do? Please help!Welcome to the Apple Community.
You can delete your account at settings > iCloud, scroll down and tap delete account. You can then enter details of any new account you create.
Note. The purchase of apps are done through an iTunes store account not your iCloud account. If you are having issues downloading apps, it isn't related to your iCloud account. -
i have two ip address on my machine,I want to directory server listen in one of the ip address(port 389) .what can i do,now it is listen on 0.0.0.0
Hi,
Can you please show the current link? (the docs.iplanet.com is no longer valid)
I also have multiple ip addresses on my machine. When I login into the admin server, it always thinks it's one of the secondary ip addresses, which aren't granted access rights.
For example, if I go to configure a different port number for the admin server, it won't let me, because it thinks I am on one of the ip addresses which aren't allowed to access it.
Thanks. -
We reset back to factory settings. After a few attempts we found an email we could use to set up as Apple ID. Everything was working great. Now it has pulled up one of the email addresses we tried to use, and is trying to verify, and asking to continue to complete the set up. It gets to a certain page, and stays there, won't let us get out of the page. We shut down the iPad, but it came back to the same thing, when it restarted. What do we do to stop this?
You will need another iOS device or a computer in order to do this, but I assume that's not a problem since you are on this forum.
see if you can change the ID using the instructions here.
Apple ID: Changing your Apple ID
Did you try starting all over again to see if you can start from scratch now? -
Cannot Send Mail, the server rejected one of the recipient's addresses.
I receive mail just fine. Can't send anything
Interesting to read all your posts, as I too have had this issue with my BRAND NEW Wi Fi 3G 64 GB ipad. Everything worked perfectly well with wireless at home, then we left for a trip interstate. First night I tried to send three emails and received the message that the server had rejected one of the recipients and the messages had been placed into the out box. Most annoying, as the out box is not accessible. I phoned apple and, after much discussion, it was suggested I call my ISP (BigPond). Another lengthy discussion and it was noted that there were no messages in my out box on the server, therefore the issue was with the ipad. I downloaded gmail and was able to receive and send emails using that program. Was also able to access my emails via Big Pond's web mail. It was just the mail program on the ipad that continuously looped back to the same error message. I deleted the account and decided to ask for a refund on the ipad. Back home, I have reinstalled mail to my Big Pond account and all seems to be working well. Am not sure what to do next, as I will be very disappointed if this keeps happening. The ipad is an expensive investment and I want to be able to use it to its fullest extent. Otherwise, I love apple products and am a apple user of more than two decades.
Good luck all.
Maybe you are looking for
-
I hav an apple ID account with balance of $25,00. I used .99 to buy gameapp for grandson. We also downloaded a freebie or two. The games show up under the apps purchased. However I can not get the games to start using my HP laptop with windows 8. A
-
Viewing AI files in my Windows application
I develop software (Embtrak) for the custom embroidery industry. One thing our software does is display the stitch file that the machine will embroider. We put the stitches over a bitmap background to help the users see what their design will look li
-
Slight Color and Quality Shift when viewing RAW files for first time in Library Module.
Hello, I have been shooting RAW for a while and have notice that after I import the images and then start to view them in the Library Module I will see a slight color and quality shift - almost looks like a white balance shift but not quite. I was
-
Just discovered another very annoying thing.. When I am in my car, and I select "Bluetooth" from the car, the Z10 automatically starts playing audio files from my Z10's music folder , which happens to contain all my ringtones. I have to go into my p
-
It's on ALE, IDocs, is this a tough one? urgent though
Dear Experts, I need to send the Cost center groups data and Profit Center groups data from one system to other, I had sent this for one time using the tcodes, from now on I need to send only the changed data, so configured the ALE for this. I activa