One off splash screen

I'm just finishing some customer specific documentation and
we want to plaster their name all over it for the 'feel good
factor'.
A splash screen would be nice, but I only want it coming up
the first time the user opens the Help file - is there way to do
this?
Alternatively, is there a way of using a redirect to show a
welcome message when you first start the help file, then not have
that initial 'redirect' topic show in the TOC?

Hi Peter,
You were right about being able to exclude the Welcome topic
from the search. The thread about how to do it is here:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=65&catid=449&threadid =1219416
The welcome message will come up each time the help file is
opened, so I'm thinking of geting the redirect to kick in after
just 1 or 1.5 seconds, so it's quick to disappear.
(It's really about making sure the customer thinks he's got
his money's worth - he's just paid for a week of my time!)

Similar Messages

Turn off splash screen, tune and beeps?

How can I turn off:
-- the initial splash screen video of shaking hands
-- the the initial little tune that plays
-- the little beeps that play with every button press
I am using an N93.
Thanks for your help.
John

The keypad tone:
Menu -> Tools -> Profiles -> General (or the profile, which is currently set) -> Options -> Personalise. Then go to Keypad tones and set to Off.
The initial tune:
In order to have this off, the Warning Tones option in the given profile should also be Off.
The grasping hands:
Go to Menu -> Tools -> Settings -> Phone settings -> General -> Welcome note/logo. Now set to Text and enter some text or choose Image and select a picture. This will be the startup animation/text. If you simply want blank screen, draw a white image in Paint, save as JPG and put for logo
Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
If I've helped, use the Kudos button to thank

Asset Off Line Splash Screen burnt to DVD

I had the Red 'asset off line' splash screen burnt to a DVD earlier today, what I had done was accidentally deleted a slideshow folder from my hard disk believing it was unused.
In Encore the slideshow was already built, I assume, and you could preview it and play it in the monitor window. Check project ran without errors as did the Build DVD, but when I went to play the DVD the slideshow soundtrack played ok but the slides were replace by a red 'asset offline' slash screen similar to the one in PP that zoomed in and out on the screen.
My mistake in the first place, I hold my hands up to that one. But shouldn't Encore have warned me about the mistake I was making in some way ?
Kevin

Joe,
No I opened Encore and this project after the slides were deleted,
I had no warnings when I opened the project, or at anytime during the build process.
After I noticed the problem on the DVD, I restored the deleted folder and all was ok from then on.
Kevin

I am new to iphones and went to Itunes and it said my new iphone needed a software update. Now the apps that I put on wont work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.

I have a new iphone and went into Itunes and it said my new iphone needed a software update. I let it do this and now the apps that I put on won't work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.

Memory Map: http://www.memory-map.co.uk/iphone/
0870: http://www.simonmaddox.com/
Viber: http://support.viber.com/home
VoucherCloud: http://questions.vouchercloud.com/

Downloaded iOS 7.0.2 and one of my apps (ultimate history quiz) changed size. It is so large I am not able to play the game because most of the print is off the screen on my iPad. Help!!!!

Had an app (Ultimate History Quiz) that I played frequently. It came up on the screen in the smaller iPhone version. Then I downloaded iOS 7.0.2, and now the app is so big that the printing goes off the screen, making it impossible to play. I checked the app sore to buy another one, and it is no longer available on there. WHAT CAN I DO TO RESTORE THE GAME TO ITS ORIGINAL SIZE???????

Wait for apple to tweak things....or talk to the app developer. they haven't updated since the update and unless APple happens to fix whatever the issue is, then the burden is on history to make their app work with the iOS

I have a iPhone but the screen is cracked so I bought a new one off eBay but the past owner iCloud is still active is there anything I can do

I have a iPhone but the screen is cracked so I bought a new one off eBay but the past owner iCloud is still active is there anything I can do

Yes, use it for parts.

Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

GXine 0.4.4: How do I turn off the splash screen?

Argh... I know I did this before, in version 0.4.1, but now I can't find the option... :oops: Does anyone know how to turn the damn ugly splash screen off?

gxine -S
for plain xine:
xine --no-splash

LG Optimus Zone. is there anyway to take the carama button off the screen and use one of the physical buttons on the phone to take pictures??

Duplicate discussion - please see:
LG Optimus Zone. is there anyway to take the carama button off the screen and use one of the physical buttons on the pho…
Message was edited by: Admin Moderator

Hello jr1984
Awesome question. Unfortunately there isn't a way to reassign the buttons. There may be a 3rd party application for the camera that would have a different option.
JoeL_VZW
Follow us on Twitter @VZWSupport

PXE issue : After pressing f12, front splash screen comes up...immediately reboots on one model PC

Good morning,
We just received 3 computers of the same series new Lenovo computers. When we try to pxe them, it hits our first splash screen...flashes "preparing network connection" and then sits still...nothing. After a few minutes, it will restart.
It never gets to the welcome screen asking for the PXE OSD password.
Can anyone help point me in the right direction? I was thinking it was NIC drivers, but I have loaded the drivers to the boot image but no change.
Thoughts?
Thank you so much!

Jason: no offense taken, i understand completely. The reason I say I loaded the drivers, is I have personally installed the exact drivers I injected into SCCM and it installed/worked in Windows. Are there other drivers that should be loaded other
than these for the boot image? I have verified the exact driver is in SCCM that I used in Windows...but still does not work.
When I do an ipconfig, it does NOT have an IP. Here's the smstslog:
LOGGING: Finalize process ID set to 808 TSBootShell
10/31/2014 9:26:42 AM 812 (0x032C)
==============================[ TSBootShell.exe ]==============================
TSBootShell 10/31/2014 9:26:42 AM
812 (0x032C)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
TSBootShell 10/31/2014 9:26:42 AM
812 (0x032C)
Debug shell is enabled TSBootShell
10/31/2014 9:26:42 AM 812 (0x032C)
Waiting for PNP initialization... TSBootShell
10/31/2014 9:26:42 AM 824 (0x0338)
RAM Disk Boot Path: NET(0)\SMSIMAGES\MPS0005E\WINPE.MPS0005E.WIM
TSBootShell 10/31/2014 9:26:42 AM
824 (0x0338)
Booted from network (PXE) TSBootShell
10/31/2014 9:26:42 AM 824 (0x0338)
Network(PXE) path: X:\sms\data\ TSBootShell
10/31/2014 9:26:42 AM 824 (0x0338)
Found config path X:\sms\data\ TSBootShell
10/31/2014 9:26:42 AM 824 (0x0338)
Booting from removable media, not restoring bootloaders on hard drive
TSBootShell 10/31/2014 9:26:42 AM
824 (0x0338)
X:\sms\data\WinPE does not exist. TSBootShell
10/31/2014 9:26:42 AM 824 (0x0338)
X:\_SmsTsWinPE\WinPE does not exist. TSBootShell
10/31/2014 9:26:42 AM 824 (0x0338)
Executing command line: wpeinit.exe -winpe TSBootShell
10/31/2014 9:26:42 AM 824 (0x0338)
The command completed successfully. TSBootShell
10/31/2014 9:26:44 AM 824 (0x0338)
Starting DNS client service. TSBootShell
10/31/2014 9:26:44 AM 824 (0x0338)
Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\
TSBootShell 10/31/2014 9:26:45 AM
824 (0x0338)
The command completed successfully. TSBootShell
10/31/2014 9:26:45 AM 824 (0x0338)
==============================[ TSMBootStrap.exe ]==============================
TSMBootstrap 10/31/2014 9:26:45 AM
1212 (0x04BC)
Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\
TSMBootstrap 10/31/2014 9:26:45 AM
1212 (0x04BC)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
TSMBootstrap 10/31/2014 9:26:45 AM
1212 (0x04BC)
Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL'
TSMBootstrap 10/31/2014 9:26:45 AM
1212 (0x04BC)
Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH
TSMBootstrap 10/31/2014 9:26:45 AM
1212 (0x04BC)
PXE Boot with Root = X:\ TSMBootstrap
10/31/2014 9:26:45 AM 1212 (0x04BC)
Executing from PXE in WinPE TSMBootstrap
10/31/2014 9:26:45 AM 1212 (0x04BC)
Loading TsPxe.dll from X:\sms\bin\i386\TsPxe.dll
TSMBootstrap 10/31/2014 9:26:45 AM
1212 (0x04BC)
TsPxe.dll loaded TSPxe
10/31/2014 9:26:45 AM 1212 (0x04BC)
Device has PXE booted TSPxe
10/31/2014 9:26:45 AM 1212 (0x04BC)
Variable Path: \SMSTemp\2014.10.30.17.00.41.0009.{FE29AD78-EE5C-42D6-BEB6-8EA71FDA2D5D}.boot.var
TSPxe 10/31/2014 9:26:45 AM
1212 (0x04BC)
Succesfully added firewall rule for Tftp TSPxe
10/31/2014 9:26:45 AM 1212 (0x04BC)
Executing: X:\sms\bin\i386\smstftp.exe -i 10.80.17.27 get \SMSTemp\2014.10.30.17.00.41.0009.{FE29AD78-EE5C-42D6-BEB6-8EA71FDA2D5D}.boot.var X:\sms\data\variables.dat
TSPxe 10/31/2014 9:26:45 AM
1212 (0x04BC)
Command line for extension .exe is "%1" %*
TSPxe 10/31/2014 9:26:45 AM
1212 (0x04BC)
Set command line: "X:\sms\bin\i386\smstftp.exe" -i 10.80.17.27 get \SMSTemp\2014.10.30.17.00.41.0009.{FE29AD78-EE5C-42D6-BEB6-8EA71FDA2D5D}.boot.var X:\sms\data\variables.dat
TSPxe 10/31/2014 9:26:45 AM
1212 (0x04BC)
Executing command line: "X:\sms\bin\i386\smstftp.exe" -i 10.80.17.27 get \SMSTemp\2014.10.30.17.00.41.0009.{FE29AD78-EE5C-42D6-BEB6-8EA71FDA2D5D}.boot.var X:\sms\data\variables.dat
TSPxe 10/31/2014 9:26:45 AM
1212 (0x04BC)
Executing command line: X:\WINDOWS\system32\cmd.exe /k
TSBootShell 10/31/2014 9:27:03 AM
812 (0x032C)
The command completed successfully. TSBootShell
10/31/2014 9:27:03 AM 812 (0x032C)
Successfully launched command shell. TSBootShell
10/31/2014 9:27:03 AM 812 (0x032C)
Process completed with exit code 1 TSPxe
10/31/2014 9:27:32 AM 1212 (0x04BC)
Succesfully removed firewall rule for Tftp TSPxe
10/31/2014 9:27:32 AM 1212 (0x04BC)
uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185)
TSPxe 10/31/2014 9:27:32 AM
1212 (0x04BC)
Failed to download pxe variable file. Code(0x00000001)
TSPxe 10/31/2014 9:27:32 AM
1212 (0x04BC)
PxeGetPxeData failed with 0x80004005 TSPxe
10/31/2014 9:27:32 AM 1212 (0x04BC)
HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1416)
TSPxe 10/31/2014 9:27:32 AM
1212 (0x04BC)
TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2623)
TSPxe 10/31/2014 9:27:32 AM
1212 (0x04BC)
oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)
TSPxe 10/31/2014 9:27:32 AM
1212 (0x04BC)
Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1183)
TSPxe 10/31/2014 9:27:32 AM
1212 (0x04BC)
Exiting with return code 0x80004005 TSPxe
10/31/2014 9:27:32 AM 1212 (0x04BC)
hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,515)
TSPxe 10/31/2014 9:27:32 AM
1212 (0x04BC)
m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,337)
TSPxe 10/31/2014 9:27:32 AM
1212 (0x04BC)
this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,549)
TSPxe 10/31/2014 9:27:32 AM
1212 (0x04BC)
Execution complete. TSBootShell
10/31/2014 9:27:32 AM 824 (0x0338)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)
TSBootShell 10/31/2014 9:27:32 AM
824 (0x0338)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)
TSBootShell 10/31/2014 9:27:32 AM
824 (0x0338)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)
TSBootShell 10/31/2014 9:27:32 AM
824 (0x0338)
::RegOpenKeyExW (HKEY_LOCAL_MACHINE, c_szSMSTSKey, 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,258)
TSBootShell 10/31/2014 9:27:32 AM
824 (0x0338)
RegOpenKeyExW failed for Software\Microsoft\SMS\Task Sequence
TSBootShell 10/31/2014 9:27:32 AM
824 (0x0338)
GetTsRegValue() failed. 0x80070002. TSBootShell
10/31/2014 9:27:32 AM 824 (0x0338)
End program: TSBootShell
10/31/2014 9:27:32 AM 824 (0x0338)
Finalizing logging from process 808 TSBootShell
10/31/2014 9:27:32 AM 824 (0x0338)
Finalizing logs to root of first available drive
TSBootShell 10/31/2014 9:27:32 AM
824 (0x0338)
Successfully finalized logs to X:\SMSTSLog TSBootShell
10/31/2014 9:27:32 AM 824 (0x0338)
Cleaning up task sequencing logging configuration.
TSBootShell 10/31/2014 9:27:32 AM
824 (0x0338)
To make a bit easier, here's the errors from the above log:
uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185)
TSPxe 10/31/2014 9:27:32 AM
1212 (0x04BC)
Failed to download pxe variable file. Code(0x00000001)
TSPxe 10/31/2014 9:27:32 AM
1212 (0x04BC)
PxeGetPxeData failed with 0x80004005 TSPxe
10/31/2014 9:27:32 AM 1212 (0x04BC)
RegOpenKeyExW failed for Software\Microsoft\SMS\Task Sequence
TSBootShell 10/31/2014 9:27:32 AM
824 (0x0338)
GetTsRegValue() failed. 0x80070002. TSBootShell
10/31/2014 9:27:32 AM 824 (0x0338)
I really appreciate all of your help!

Z77A-GD65 Multiple BIOS Issues - B4 Hang, Splash Screen Blinking

Back in November 2012, I built a home server with a Z77A-GD65. Lately, I've noticed some strange things happening that I've been trying to research but to no avail.
First off, I get the B4 code hang-up whenever I'm booting. This doesn't matter if it's a cold boot or a reboot, it hangs on B4 for about 10-15 seconds, flashes 92 really quick, and then goes to A2 which it stays for another 5 or so seconds. After that I get the MSI splash screen for about 1 second, then it blinks 5 times. After that it goes into Windows just fine.
The blinking is a new issue, the B4 hang is not. I've read from multiple posts that this is a USB issue. When I disable USB legacy support, the issue goes away, but of course then I can't have legacy support. I have yet to figure out what exact device is causing it. In the process of trying to figure this out, I updated BIOS to A.A0. After updating to this version of BIOS the splash screen blinks 5 times before going to the "Starting Windows" splash screen. This is a more difficult issue to figure out why it's doing this because if you search for "BIOS" and "flash" or "flashes" or "flashing", you typically get results for flashing your BIOS. Hence, why I'm using the term "blinking". But even then I can't really find a solution out there.
I also happened to see that the website for the Z77A-GD65 is showing a newer BIOS version, but I'm unable to flash this (at least using M-Flash). I threw it on a USB, re-enabled USB legacy and whenever I click on it to install, the BIOS screen hard locks. The screen just freezes exactly where it's at in the BIOS and the mouse is dead. However, I can CTRL+ALT+DEL on the keyboard and it will reboot the system so I don't need to power cycle the computer. Not sure why this is happening either. Perhaps I need to flash this a different way? Maybe I don't need to flash this at all?
I could really use some input here on why this is happening.
As for the specs on my system, they're as follows:
i7-3770K overclocked to 4.2 Ghz by using the Turbo Mode in BIOS
32GB Komputerbay DDR3 PC3-12800 1600MHz DIMM with Low Profile Blue Heatspreaders Quad Channel RAM | 9-9-9-24 XMP ready
AMD PowerColor 7870 Myst Edition GPU - currently not overclocked although overclocking this doesn't seem to affect any issues
2 - 128 GB Corsair SATA III SSD - one runs the OS, the other I use to load games from
2 - 500 GB Seagate Barracuda 7200 RPM Sata II HDD's mirrored via Windows 7
1 - 750 GB Seagate Barracude 7200 RPM Sata II HDD
1 - 1 TB Western Digital MyBook USB 2.0 external
2 - 3 TB Seagate USB 3.0 external
ASUS DVD Burner - not sure which one, it's a cheapy $20 from Newegg
1 - PCI USB 3.0 expansion card
Antec TruePower New TP-550 Modular 550W Continuous Power ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS BRONZE Certified Active PFC "compatible with Core i7/Core i5" Power Supply
NZXT Switch 810 gunmetal - currently have 4 fans running but plan on more, also the Switch 810 has the multi-card reader in the front with 1x SD Card, 2x USB 2.0, 2x USB 3.0
for peripherals
1 - Microsoft 360 Wireless controller adapter (legit one, not the knockoff although I had a knockoff prior to getting the real deal)
1 - Logitech Wireless USB Keyboard with Touchpad
I tried to be thorough. Thanks in advance for any help!

Quote from: PirateDog on 26-August-13, 12:45:18
Probably a USB device problem.
This is a candidate, as well as mouse and keyboard. Disconnect USB devices one at a time to find the culprit.
A lot of devices running. PSU a +12V single rail or is it multi rail? A rail going to the graphics or components may not be enough amps. My best guess is the card reader.
For UEFI/BIOS flashing, select your mainboard here and use the forum flash method;
I'll definitely try unplugging some of these USB devices to see if that helps with the B4 hang issue.
As for the PSU, according to the description for it on Newegg: "Four industry-leading independent +12v rails are provided for more stable and safer power output." It has two rails going to the GPU. The GPU is a new addition to the system and so I wasn't running it until recently. The issues were occurring beforehand, but you're right that this PSU is underpowered for the rig considering PowerColor recommends a minimum of 500w. I'm going to be buying a larger capacity one sometime in the very near future. Any recommendations on good modular PSU's? What's a good way to tell what wattage to get?
Thanks for letting me know about the forum flash method. I'll be back later when I have some results.

Tecra M3 - Stuck at Toshiba BIOS Splash Screen

Not sure what to do here with this one...
Bit of history... we bought my niece a used laptop for surfing/movies which worked fine when I had it a few weeks setting it up and such, she had it a week and it's now dead. Some days it works, some days won't even turn on. So, after much work determined it to be a motherboard issue, and since it was a $200 DELL, we optedto buy another laptop.
I grabbed a used Tecra M3, been playing with it all week, games, surfing, you name it, seemed a gtood solid performer. I give it to her, she goes upstairs, plugs it in, powers on and just sits at the splash screen.
Two nephews have no issues with theirs, wondering if possible the power outlet surging and killing the systems? She's 16, so (hopefully) knows how to handle a laptop carefully.
Regardless... can't afford another dead laptop. Stuck at startup BIOS splash screen, won't go beyond that. Won't let me into the BIOS, and if I hit too many keeps too many times, laptop just beeps per keystroke.
Any advice?
Solved!
Go to Solution.

Well, not much of a support forum... 2nd posting and neither issue I had had any responses at all.
In case someone see's this because having the same issue, the hard drive was very loose, barely making contact and fell off when I touched it. Pushed it all the way back in and works fine. Pegs on the panel designed to prevent the drive from becomming lose, not very good, still allowed the drive enough wiggle room to shake loose.

BLACK SCREEN on start up with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-power

Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any
cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears,
and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After
about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling,
so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the
driver wasnt for the system, which was wrong. I made it work somehow, but it was still sluggish. I rolled it back to an earlier driver, and now it works fine. No sluggish performance / slight freeze window thing going on.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change
this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1
Please excuse the small text at the beginning, there isn't an option to un-do that error.

You are very wrong about that mystified. What do YOU think made my computer work without beeping at all hu? (I bet you're gonna tell me). I figured it out.
RE-INSTALL WINDOWS 7 OS.
SOLVED.
DOESN'T BEEP ANY MORE.
THAT IS A PART OF microsoft ISN'T IT.
::: EGO KILLER 9000 :::

I'm looking for a script that preloads a Splash Screen on Android

I've read all threads here already about this subject. For most AdobeAir projects for Android, no matter what size, it could take up to 20 sec to load the app, and while it loads, all you see is a black screen. As there's no support for a Default.png like there is for iPhone, we have to use a preloader.
I've only found one for Flex, which is no good to me as I'm using Flash Pro 5.5 (IDE). I've tried doing some simple preload-a-swf-preloader but it just loads it to 100% before showing anything anyway.
Anyone here that can share a script of a simple preloader for Flash CS5.5?
I know that to reduce the loading time and show a splash screen on android we need to make a very small swf that will contain the loading screen image, and that same swf will also preload the maingame.swf (but can that be done? Appstore don't like code in more than one swf) into it. My tries have failed.
Here's some quotes in case someone who reads this might be knowledgable enough to help me out:
Yes its possible to get a splash to appear straight away (well within one to 2 seconds which is close enough) but
(a) You have to create a small splash .SWF which loads your main .SWF (OK so that's fairly obvious but a "Default.PNG" splash screen facility as per the iPhone packager and FLEX projects is what you might expect)
(b) Your splash .SWF must embed the splash image. If you try to dynamically load an image nothing will appear until the whole of the APK file is loaded ( and presumably initialised). That was what I was doing wrong.
It takes 20 sec to load, it's all black before it's done loading and the runtime takes up 25mb!
(1) Yes that is a bit of a problem but seems to be the cost of compiling in the AIR runtime. I am sure that most mobile projects only use a subset of the entire AIR library - its a shame you can't just compile in the bits that you need and drop the rest.
(2) This is partly because of (1) and the fact it takes so long to get a big file up and running with AIR. You need to create a preloader that is very small and all it does is display a splashscreen and then loads in the main 25mb file that you embed in the assets of your preloader. The small preloader appears quickly and then gives you time to do your 'work' loading the main app with something onscreen. This gives an example / explanation and there are others out there :
http://www.mcbrearty.me.uk/index.php/2011/05/09/actionscript-mobile-pr oject-splash-screen/

Hi Nick,
Using the FileSystemObject object to delete a folder will delete the profile directory, but it won't delete its associated registry path:
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\user's SID
There are also two other complications: 1. you can't delete a profile for a user that's logged on; and 2. the user might have logged off, but the profile might not be completely unloaded (see
http://support.microsoft.com/kb/837115 ).
In the meantime, I recommend 'uphclean' and the 'delprof.exe' found in the Resource Kit utilities.
HTH,
Bill
Can we combine FileSystemObject and deleting Reg Keys?
¯\_(ツ)_/¯

A135 stuck at splash screen

Normal shutdown; when i bootm, the comp is stuck at the Toshiba splash screen. F2 won't respond; f12 , if I tap repeatedly wwill say 'entering ..." but stays there (the splash screen.). It is not responding to the recovery disk. Lights say HD, battery, etc. are all good. Ideas?

1) Try removing only the battery, leave the AC plugged in, power on.
2) Try unplugging the AC, leave the battery in, power on.
3) Try unplugging AC, remove the battery, remove both RAM modules, replace one RAM module in a different spot, replace battery & AC, power on. Repeat this process until you have tried each RAM module alone in each slot. See the installing/removing RAM directions starting on page 47 of your Satellite® A130/A135 Series User’s Guide.
4) If none of the above works it could be a corrupt BIOS.
BIOS Recovery procedures
5) As your system is likely off warranty, perhaps you should consider paying a professional for a diagnostic:
Locate a Service Center
Good luck.
Mike

One off splash screen

Similar Messages

Maybe you are looking for