One or more accounts provided could not be validated

I am trying to install the second node in the same management group of scom 2012. but I keep running into the error
one or more accounts provided could not be validated.
the account is the system center data access service account
any ideas ? The account is not locked out.

Check that this account has sufficient rights on the maangement server. local admin could be nice. Also try to startup a program such as notepas or whatever using the Run as DIfferent User option and type the credentials. Dont forget to place the domain
name as well as domain\sdkaccount (and do not copy/paste into those fields! Manually type everything in that wizard.
Bob Cornelissen - BICTT (My Blog about SCOM) - MVP 2012 + 2013 and Microsoft Community Contributor 2011 + 2012 Recipient

Similar Messages

One or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.

hi All,
i have one of the requirement for an application, we do upload some release not in file server and that is used in application link to see the note. in this note i have converted the Excel into .HTM format(web page). this was working fine, but from last
two days all of a sudden we are recieving error as above.
one or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.
could anyone please help me on this.
Thanks and Regards,
krishnamurthy

Hi,
Actually Arnavsharma provided a operable method for you. But no luck, it's not invalid.
Here I also offer you an method you can try.Please delete the extra (parasite) zone from the Zones subkey :
Click Start , click Run , type regedit , and then click OK
Expand the following registry subkey
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones
Delete the extra (parasite) zone from the Zones subkey
Note: The parasite zone is a pseudo-graphic number listed before zone number 0. The pseudo-graphic number looks like a miniature upper case "L"
Close the registry editor
Thanks!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

One or more activex controls could not be displayed because either

Hi.
I don't know if this is the right forum for my problem.
Anyway,
I have a problem with my Windows Services.
Each time when I launch Windows Services window, I get a warning:
One or more activex controls could not be displayed because either:
1. your current security settings prohibit running activex
controls on this page, or
2. you have blocked a publisher of one of the controls.
as a result, the page may not display correctly.
The warning pop-up opens only when I click on Extended tab.
The problem has nothing to do with IE security, because I can open pages with ActiveX controls on them and so.
I have installed Spybot spyware/malware removal tool. Then uninstalled it.
I'm not sure if this is the cause of the problem. But I presume it is.
So, may be someone was facing the same problem and knows the cause for it.
Thanks.

Unlike the rubbish that was stated before this post, this one works. This is the solution and Jishnu is brilliant. Thanks a million, friend.
Try to follow the KB article (KB907343).
1.
Click Start, click Run, type regedit, and then click OK.
2.
Expand the following registry subkey:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0
3.
In the right pane, right-click 1200, and then click Modify.
4.
In the Value data box, type either 1 or 0 to overwrite the existing value of 3. Then, click OK.
Note If you type 1 in the Value data box, you will receive the following prompt when you start Microsoft Project:
Do you want to allow software such as ActiveX controls and plug-ins to run?Additionally, you will receive this prompt at other times when you use Microsoft
Project. If you do not want to receive this prompt, type 0 in the Value data box.
The values 0, 1, and 3 are associated with the following behavior:
0 = Enabled, or the action is permitted
1 = Prompt
3 = Disabled, or the action is not permitted
5.
Quit Registry Editor.
IF this does not works try to check the Internet Options..
Try to reset the Internet Explorer.
1. Click on
Start & run.
2. Type inetcpl.cpl & click
ok
3. Click on Advance Tab & click on
Reset (Make sure to put the check mark on the delete the personal setting for IE8) then again
reset.
4. Click
close.
This should work.

One or more PGP signatures could not be verified!

Trying to install anything with pacaur or using makepkg gives out this error:
==> Making package: cower 12-2 (Wed Jan 7 07:11:25 WET 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Downloading cower-12.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 22636 100 22636 0 0 60301 0 --:--:-- --:--:-- --:--:-- 60362
-> Downloading cower-12.tar.gz.sig...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 287 100 287 0 0 1136 0 --:--:-- --:--:-- --:--:-- 1134
==> Validating source files with md5sums...
cower-12.tar.gz ... Passed
cower-12.tar.gz.sig ... Skipped
==> Verifying source file signatures with gpg...
cower-12.tar.gz ... FAILED (unknown public key 1EB2638FF56C0C53)
==> ERROR: One or more PGP signatures could not be verified!
Can someone help?

clfarron4 wrote:
Potomac wrote:
jasonwryan wrote:Like everything else, this can be automated with a couple of lines in your ~/.gnupg/gpg.conf file, as described in the wiki.
I don't find this part in the wiki, can you tell me exactly where have you read this ?
https://wiki.archlinux.org/index.php/Gnupg
I saw automatic importing of missing keys in this BBS thread. Don't know if it is in the ArchWiki though.
Just found it here: https://wiki.archlinux.org/index.php/Ma … e_checking
It is a personal preference, I don't want to import Arch/AUR keys into my normal personal keyring - but reading the gpg (and makepkg) manpage it looks like if you set GNUPGHOME=/some/path first that should work to set a special keyring just for AUR and a custom config from the wiki.

AirPort asks for PPPoE connection information consists of an account name and a password. Where can I find it? My provider could not help me.

AirPort asks for PPPoE connection information consists of an account name and a password. Where can I find it? My provider could not help me.

If your provider won't tell you then you must use their provided router.. some ISP are like that.

Named Pipes Provider: Could not open a connection to SQL Server [2]

Hi
I'm a complete sql/asp.net newbie and want to try this tutorial:
http://beta.asp.net/GuidedTour/
First I installed:
Visual Web Developer 2005 Express Edition Beta 2
systemsettings\software shows the "sql server 2005 express edition ctp (sqlexpress)" installed
mmc\service shows me the SQL Server (SQLExpress) is running
Following the guided tour I use the commandline, type cmd, and type in the commandbox:
"C:\Program Files\Microsoft SQL Server\90\Tools\binn\SQLCMD90" -S "localhost\SqlExpress"
Instead of localhost I also tried computername.smallbusiness.local (thats my fully domain name).
However I always receive the error:
Named Pipes Provider: Could not open a connection to SQL Server [2]
Thank you very much for all your help

Typically I have found problems with connection strings as one of a few things:
1. Your instance is named different than the default. I labeled mine BrettSQLServer instead of the regular instance.
2. Your default storage of the your database has a user the system does not like and won't give it access.
3. You have ports blocked that SQL Server is trying to access.
1. Your instance should show up under 'SQL Server Configuration Manager'. Start>MS SQL Server 2008 > Configuration Tools> SQL Server Configuration Manager. You should see a left view panel where you can click 'SQL Server Services'. This
will show on the right all of your SQL services that are running. The most important one is SQL Server({Your SQL Server Name}). You will see column headers's displaying: "Name, State, Start Mode, Log on as, ProcessID" by default. If
you don't see a version of this you may have no installed SQL server properly and gotten SQL management studio but not the server. If you have the server and it's off or not running that is another problem. If your "LOG On AS" is a service account
is "NT ...." or something besides "Local System" that may be a problem. Without getting into the symantecs of protection suffice to say you log in with less than system, yes you are more secure but some built in functions for connections may not work.
2. Going off of rights of your 'Log On As' I WOULD USE 'System' NOT "NT Authority....". The reason is that you can access less things with 'NT Authority....' but yes you are more secure for that reason. If you are just trying to connect at home
to test non secure things I don't see the harm. If you are setting up a database for a multinational corporation than, Yes I would use a more secure account. If you need to change it while still in SQL Server Confi Manager: Right Click> SQL
Server(Your Version) > On 'Log On' tab > Choose drop down for 'Built-in Account' select 'Local System'. As extra steps make sure by some strange reason your database locales have this user by default(They should). MS likes to install database
as default to: C:\Program Files\Microsoft SQL Server\MSSQL10.{instanceName}\MSSQL. If you go to this location by going: right click>Properties>Security Tab .. and you fail to see your user that SQL server is defined as you may have lots of
issues.
3. Turn off Windows Firewall during SQL installation. If you are scared of being attacked during this down window, disconnect your NIC and reconnect later. I have not added a port manually in a while but it is simply easier to just
turn off your firewall during install. Having your TCP/IP connection from SQL Server blocked is kind of bad if you need to connect to it that way later.
Problems most commonly encountered with SQL Server by users I have seen and I myself encountered a lot with full blown SQL Server Enterprise as well as Express versions of SQL:
Connection string DO not work for BIDS, ADO.net, Linq, etc...
Once you follow steps above just go {ComputerName}\{SQL Server Instance} as your connection name. That mostly always works. As a preliminary test you should install SQL Management Studio first before doing connection strings for a basic test
that it can access your server. When you first boot it up and click 'New Database Engine Query' it will display Server Type: "Database Engine" and a blank field or autopopulated field for 'Servername'. The {ComputerName}\{SQL Server Instance} almost
always works. If it works and you can connect, you know that you have access, if you don't start there first before getting into connection strings through .NET languages. I suggest just adding an easy alias, my local SQL box is simply called
'Brett'. Go again back to SQL Server Configuration Manager. On the left side click 'SQL Native Client ...' > 'Aliases' > New > type in whatever you want. Go back to the left pane click on 'SQL Server Services' ensure the service
'SQL Server Browser' is running and set to run automatic. Have fun accessing SQL Server with your alias.
Help I can't get FileStream to work and I ran 'spconfigure' in SQL and it still doesn't work.
Kind of annoying that more sites don't list that it is entirely in the Configuration manager and has zilch to do with setting the option if the config has it off. I am not a master of the sp_configure TSQL access method but I know during installs turning
it on fails to REALLY turn it on. Once again go to SQL Config Manger > SQL Server Services > Right click your instance > Select FILESTREAM tab > enable both check boxes. Restart SQL Server. Install Adventureworks 2008 and whatever
else failed due to filestream access levels.
Medium to Advanced on some things, but always wanting to know more

One or more field types are not installed properly. Go to the list settings page to delete these fields.

Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
Jeeva

Hello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Error in MR11: One or more purchase orders were not updated

Dear Gurus,
While posting MR11 for a account assigned purchase order i'm facing a error as "One or more purchase orders were not updated" under message ID CKMLGRIR 003.
Diagnosis: An error occurred during the update. As a result, an entire processing package of purchase orders could not be cleared.
I checked with the PO and it looks correct.
What may cause this issue? I'm using 4.6C release.
Thanks in advance.
Regards,
RathiM

Please check the SAP note below :
843022 MR11: Error log, purchase order number is missing

Unable to access one or more accounts message

I keep getting an alarm sound with the message displayed on the main unit that said "Unable to access one or more accounts" . I got it about 3 or 4 times a day, and don't know what it was about. Could someone help me on this. I would appreciate it very much.

t this too from my email account. I'm not surprised as I've never managed to get this email account to actually work from the device!
Come to that the best I've ever done is get it to down load mail, think that was the N900 not the N5800, have never got it to send!
Sorry no help to you OP but at least your not alone!

"One or more field types are not installed properly. Go to the list settings page to delete these fields" while accessing website pages

We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!

Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal

Named Pipes Provider: Could not open a connection to SQL Server

We are running into an error on a SQL request from SQL-IDA to the SQL-IDB server. Both servers are on Windows 2005 with MS SQL Server 2003 SP3.
OLE DB provider "SQL-IDA" for linked server "SQL-IDB" returned message "Login timeout
expired".
OLE DB provider "SQL-IDA" for linked server "SQL-IDB" returned message "An error has
occurred while establishing a connection to the server. When connecting to SQL Server 2005,
this failure may be caused by the fact that under the default settings SQL Server does not
allow remote connections.".
Msg 53, Level 16, State 1, Line 0
Named Pipes Provider: Could not open a connection to SQL Server [53].
It seems to suggest that SQL-IDA cannot find the network path to SQL-IDB. We've followed the steps in this article http://support.microsoft.com/default.aspx?scid=kb;EN-US;914277 but it did not resolve our issue. Is it possible that the MSDTC dynamic port range
should be set to a specific range on both servers?
Any help is greatly appreciated.
Albert

Hi Albert,
Can you try to use the SQL Server Management Studio on server ‘SQL-IDA’ to connect to the instance on server ‘SQL-IDB’ to see if it works or not?
There are possible reasons to error 53:
a) typo in the server name, or using "/" rather than "\" between server name and instance name, e.g. "myserver/myinst" is not correct.
b) name resolution to the server name is not correct, "ping -a yourserver" would tell if that's the case
c) The server machine is firewall'ed and file sharing is not in the exception list. You need put "File and Printer Sharing" in exception.
For more information:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server (Microsoft SQL Server, Error: XXX).
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Stephanie Lv
TechNet Community Support

INS-40925 - One or more nodes have interfaces not configured with a subnet that is common across all cluster nodes.

Hi All,
I am facing the below error while installing Oracle RAC in Silent Mode.
SEVERE: There are no common subnets represented by network interfaces across all cluster nodes.
SEVERE: [FATAL] [INS-40925] One or more nodes have interfaces not configured with a subnet that is common across all cluster nodes.
   CAUSE: Not all nodes have network interfaces that are configured on subnets that are common to all nodes in the cluster.
   ACTION: Ensure all cluster nodes have a public interface defined with the same subnet accessible by all nodes in the cluster.
My /etc/hosts is given below.
127.0.0.1        localhost    localhost.localdomain
#Public
192.168.1.101      rac1        rac1.localdomain
192.168.1.102    rac2        rac2.localdomain
#Private
192.168.2.101    rac1-priv    rac1-priv.localdomain
192.168.2.102    rac2-priv    rac2-priv.localdomain
#Virtual
192.168.1.103      rac1-vip    rac1-vip.localdomain
192.168.1.104    rac2-vip    rac2-vip.localdomain
#SCAN
192.168.1.105    rac-scan    rac-scan.localdomain
Could you please help me to get rid of the error INS-40925....Any Idea...???

Hi Ramesh,
Please find the result of ifconfig -a from both nodes RAC1 & RAC2.
ifconfig -a in RAC1
[oracle@rac1 Desktop]$ ifconfig -a
eth0      Link encap:Ethernet HWaddr 08:00:27:17:7A:D5
          inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fe17:7ad5/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:102 errors:0 dropped:0 overruns:0 frame:0
          TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:25472 (24.8 KiB) TX bytes:3322 (3.2 KiB)
          Interrupt:19 Base address:0xd020
eth1      Link encap:Ethernet HWaddr 08:00:27:C0:AC:DB
          inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fec0:acdb/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:4 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:240 (240.0 b) TX bytes:816 (816.0 b)
          Interrupt:16 Base address:0xd240
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:56 errors:0 dropped:0 overruns:0 frame:0
          TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6394 (6.2 KiB) TX bytes:6394 (6.2 KiB)
virbr0    Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
          inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
          UP BROADCAST MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
virbr0-nic Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
          BROADCAST MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:500
          RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
ifconfig -a in RAC2
[oracle@rac2 Desktop]$ ifconfig -a
eth0      Link encap:Ethernet HWaddr 08:00:27:C9:38:82
          inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fec9:3882/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:122 errors:0 dropped:0 overruns:0 frame:0
          TX packets:59 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:32617 (31.8 KiB) TX bytes:5157 (5.0 KiB)
          Interrupt:19 Base address:0xd020
eth1      Link encap:Ethernet HWaddr 08:00:27:90:B5:A0
          inet addr:192.168.2.102 Bcast:192.168.2.255 Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fe90:b5a0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:4 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:240 (240.0 b) TX bytes:746 (746.0 b)
          Interrupt:16 Base address:0xd240
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:56 errors:0 dropped:0 overruns:0 frame:0
          TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6390 (6.2 KiB) TX bytes:6390 (6.2 KiB)
virbr0    Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
          inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
          UP BROADCAST MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
virbr0-nic Link encap:Ethernet HWaddr 52:54:00:CC:BD:FB
          BROADCAST MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:500
          RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

Named pipes provider : could not open a connection to a SqL server . . . . .

Hey all, i need help
I have a job which was running quite peacefully for the last EVER, but since last Saturday it keeps failing and then run successfully and then fails. . . . .and gives me the below error.
Executed as user: Sx\xxx. Microsoft (R) SQL Server Execute Package Utility Version 10.0.5500.0 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 9:00:00 PM Progress: 2014-03-11
21:00:02.16 Source: {122F32F1-F99F-4A5A-BA70-F5426B2747DA} Executing query "DECLARE @Guid UNIQUEIDENTIFIER EXECUTE msdb..sp...".: 100% complete End Progress Progress: 2014-03-11 21:00:02.19
Source: Manually replicate tables Executing query " USE DBNAME ".: 50% complete End Progress Error: 2014-03-11 21:00:22.35 Code: 0xC002F210 Source: Manually replicate
tables Execute SQL Task Description: Executing the query " exec usp_ReplicateEsourceTable 'Ebase'; ..." failed with the following error: "Named Pipes Provider: Could not open a connection to SQL
Server [53]. OLE DB provider "SQLNCLI10" for linked server "ServerName" returned message "Login timeout expired". OLE DB provider "SQLNCLI10" for linked server "ServerName" returned message "A
network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online.".". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. End Error Progress: 2014-03-11
21:00:22.45 Source: Notify on failure Executing query "exec msdb.dbo.sp_notify_operator @profile_name =...".: 100% complete End Progress DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:00:00 PM Finished: 9:00:23 PM Elapsed: 22.25 seconds. The package execution failed. The step failed.
I have already tested the linked server connection between those servers and its fine. And what is weird is that when i run the job manually it runs successfully.
Any ideas?

Hi,
How often does the job run? Does the query fail intermittently?
I suggest you check the following configuration on both servers:
1. In SQL Server Configuration Manager, expand SQL Server Native Client Configuration, right-click
Client Protocols, and then click Properties. What’s the order of protocol?
2. Check if the default port of TCP/IP is set to 1433.
By default, the top protocol is to use TCP/IP and then Named Pipes. There are two possible situations:
1. Connection fails and client protocol is using TCP/IP 1433.
When server A remotes to server B, it will use TCP/IP connection. If it encounters some issue during connecting (such as network issues), it will use Named Pipes instead. If the Name Pipes 445 still fails, thus the above error message will
be thrown out. It will use Name Pipes afterwards until the SQL Server service is restarted.
2. The port number is not 1433.
However, the remote machine is listening 1433. Then, the linked server will trying to use TCP/IP first. Because of the port error, it will change to Name Pipes.
Thanks.
Tracy Cai
TechNet Community Support

I'm trying to order album and I'm getting this message:Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.

I'm trying to order an album and I'm getting this message:
Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
As far as I can see I have placed pictures on all the pages. I admit that on some pages I could have placed 3 or 4 pictures but I chose to use ony one or two. Could that be the problem?

Yes -
Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
The error seems pretty clear - you must have a photo in evey photo frame in order to place your order - so you must either change the layout (if you only want one photo on a page then use a layout with one photo) or put photos in the spots you have not filled
LN

I get the following error message when I try to receive e-mail in this hotmail account: "Configuration could not be verified – is the user name or password wron

I have tried to add a hotmail account to Thunderbird because my Internet provider will stop e-mail support in the near future. I was able to add a hotmail account to Thunderbird, but I get the following error message when I try to receive e-mail in this hotmail account: "Configuration could not be verified – is the user name or password wrong?" (The hotmail website receives the e-mail.) User name and password is certainly correct. I have a 8.1 OS. Thank you.

got an anti virus that thinks it should scan email. Turn that function off.
Have a firewall, check that Thunderbird has full internet access, not some Auto rubbish that somehow fails.

One or more accounts provided could not be validated

Similar Messages

Maybe you are looking for