One or more activex controls could not be displayed because either

Hi.
I don't know if this is the right forum for my problem.
Anyway,
I have a problem with my Windows Services.
Each time when I launch Windows Services window, I get a warning:
One or more activex controls could not be displayed because either:
1. your current security settings prohibit running activex
controls on this page, or
2. you have blocked a publisher of one of the controls.
as a result, the page may not display correctly.
The warning pop-up opens only when I click on Extended tab.
The problem has nothing to do with IE security, because I can open pages with ActiveX controls on them and so.
I have installed Spybot spyware/malware removal tool. Then uninstalled it.
I'm not sure if this is the cause of the problem. But I presume it is.
So, may be someone was facing the same problem and knows the cause for it.
Thanks.

Unlike the rubbish that was stated before this post, this one works.  This is the solution and Jishnu is brilliant.  Thanks a million, friend.
Try to follow the KB article (KB907343).
1.     
Click Start, click Run, type regedit, and then click OK.
2.     
Expand the following registry subkey:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0
3.     
In the right pane, right-click 1200, and then click Modify.
4.     
In the Value data box, type either 1 or 0 to overwrite the existing value of 3. Then, click OK.
Note If you type 1 in the Value data box, you will receive the following prompt when you start Microsoft Project:
Do you want to allow software such as ActiveX controls and plug-ins to run?Additionally, you will receive this prompt at other times when you use Microsoft
Project. If you do not want to receive this prompt, type 0 in the Value data box.
The values 0, 1, and 3 are associated with the following behavior:
0 = Enabled, or the action is permitted
1 = Prompt
3 = Disabled, or the action is not permitted
5.     
Quit Registry Editor.
IF this does not works try to check the Internet Options..
Try to reset the Internet Explorer.
1. Click on
Start & run.
2. Type inetcpl.cpl & click
ok
3. Click on Advance Tab & click on
Reset (Make sure to put the check mark on the delete the personal setting for IE8) then again
reset.
4. Click
close.
This should work.

Similar Messages

  • One or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.

    hi All,
    i have one of the requirement for an application, we do upload some release not in file server and that is used in application link to see the note. in this note i have converted the Excel into .HTM format(web page). this was working fine, but from last
    two days all of a sudden we are recieving error as above.
    one or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.
    could anyone please help me on this.
    Thanks and Regards,
    krishnamurthy

    Hi,
    Actually Arnavsharma provided a operable method for you. But no luck, it's not invalid.
    Here I also offer you an method you can try.Please delete the extra (parasite) zone from the Zones subkey :
    Click Start , click Run , type regedit , and then click OK
    Expand the following registry subkey
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones
    Delete the extra (parasite) zone from the Zones subkey
    Note: The parasite zone is a pseudo-graphic number listed before zone number 0. The pseudo-graphic number looks like a miniature upper case "L"
    Close the registry editor
    Thanks!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • One or more PGP signatures could not be verified!

    Trying to install anything with pacaur or using makepkg gives out this error:
    ==> Making package: cower 12-2 (Wed Jan 7 07:11:25 WET 2015)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving sources...
    -> Downloading cower-12.tar.gz...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
    100 22636 100 22636 0 0 60301 0 --:--:-- --:--:-- --:--:-- 60362
    -> Downloading cower-12.tar.gz.sig...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
    0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
    100 287 100 287 0 0 1136 0 --:--:-- --:--:-- --:--:-- 1134
    ==> Validating source files with md5sums...
    cower-12.tar.gz ... Passed
    cower-12.tar.gz.sig ... Skipped
    ==> Verifying source file signatures with gpg...
    cower-12.tar.gz ... FAILED (unknown public key 1EB2638FF56C0C53)
    ==> ERROR: One or more PGP signatures could not be verified!
    Can someone help?

    clfarron4 wrote:
    Potomac wrote:
    jasonwryan wrote:Like everything else, this can be automated with a couple of lines in your ~/.gnupg/gpg.conf file, as described in the wiki.
    I don't find this part in the wiki, can you tell me exactly where have you read this ?
    https://wiki.archlinux.org/index.php/Gnupg
    I saw automatic importing of missing keys in this BBS thread. Don't know if it is in the ArchWiki though.
    Just found it here: https://wiki.archlinux.org/index.php/Ma … e_checking
    It is a personal preference, I don't want to import Arch/AUR keys into my normal personal keyring - but reading the gpg (and makepkg) manpage it looks like if you set GNUPGHOME=/some/path first that should work to set a special keyring just for AUR and a custom config from the wiki.

  • One or more accounts provided could not be validated

    I am trying to install the second node in the same management group of scom 2012. but I keep running into the error
    one or more accounts provided could not be validated.
    the account is the system center data access service account
    any ideas ? The account is not locked out.

    Check that this account has sufficient rights on the maangement server. local admin could be nice. Also try to startup a program such as notepas or whatever using the Run as DIfferent User option and type the credentials. Dont forget to place the domain
    name as well as domain\sdkaccount (and do not copy/paste into those fields! Manually type everything in that wizard.
    Bob Cornelissen - BICTT (My Blog about SCOM) - MVP 2012 + 2013 and Microsoft Community Contributor 2011 + 2012 Recipient

  • ORA-20001: The printing engine could not be reached because either the URL

    Hi all,
    created a report and tried to have a pdf report
    using this link
    http://www.oracle.com/technology/obe/apex/apex31nf/apex31rpt.htm
    when i did a sample with apex.oracle.com
    it is working fine.
    but in my site
    when i click the print button i am getting an error
    <div id="report_4897903101326173_catch"></div><pre>report error:
    ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.</pre>
    Using : Oracle-Application-Server-10g/9.0.4.0.0 .
    Oracle-HTTP-Server.
    I am working on Remote server. How to find whether the printserver is configured or not?
    Is there any query to check it out?
    can any one please help? I really need to get this work.
    bye
    Srikavi

    hi guys . i have the same problem and i dont know how to fix it . I use APEX on my PC and i just install BI Publisher 10.1.3.2.1 and made the settings in APEX as follows:
    Print Server : Advanced (requires BI Publ...)
    Print Server Protocol: HTTP
    Print Server Host Address: http://192.168.1.2/ ---> IS THIS MY HOST ? when i start the BI Publisher Server the address is" http://192.168.1.2:9704/xmlpserver"
    Print Server Port :9704
    Print Server Script: /xmlpserver/convert
    Now when i click PRINT and choose to open or save it on my pc inside the document ( word/html ) it gives me error "ORA-20001: The printing engine could not be reached because either...".if its PDF i can open it becouse of some problem.Sorry for my english i hope you uderstand what im trying to say.thx in advance

  • ActiveX control "could not be loaded"

    G'Day everyone,
    I'm having a problem with my activeX controls (SHDocVw.IWebBrowser2 for example) - when I load and run a LabVIEW 6i VI with an ActiveX container on the front panel, I get an error 97 (Unknown System Error in Untitled.vi) out of its method node. If I load the same VI into LabVIEW 6.1, I get the same error, and the container has "Control could not be loaded" written in it. This isn't just limited to the web browser control, but others too. (they used to work a week or so ago, and I can't think of anything I've done to the system since then...) If anyone has any ideas on how to fix this, I'd really appreciate it!
    cheers,
    Christopher
    Christopher G. Relf
    [email protected]
    Int'l Voicemail & F
    ax: +61 2 8080 8132
    Aust Voicemail & Fax: (02) 8080 8132
    EULA
    1) This is a private email, and although the views expressed within it may not be purely my own, unless specifically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
    2) This email has NOT been scanned for virii - attached file(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsibility.
    3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

    Unfortunately, it was *all* of my ActiveX controls that wouldn't load. That said, A user of the Info-LabVIEW list came up with the answer: reinstall the RunTime engine - wierd....
    thanks,
    Christopher
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

  • Web browser activex control could not be loaded in compiled exe

    Hi everyone.
    I just met this issue again. Previously I solved this issue by registering the mscomctl.ocx, nicont.dll, nicontdt.dll in version 7.1. Now we are using 8.5.2, and the problem came up again.
    I've tried the following:
    1. use the latest nicont.dll,nicontdt.dll on the installed computer. http://digital.ni.com/public.nsf/allkb/4B0C1BBDA9CFEBE7862573D0005D93C4
    2. tried to repair the run-time engine.
    knowledge base http://digital.ni.com/public.nsf/allkb/5F06D38D61D883498625734800620168?OpenDocument
    How do we enforce to repair the run-time engine of 8.5.2?
    Thanks for any input.
    Jun

    Hello,
    The instructions on the knowledgebase are correct. You need to open Add/Remove Programs and then select the entry for National Instruments Software and click change or modify (whichever option is present for you). You can then follow the knowledgebase and select your run-time version.
    -Zach
    Certified LabVIEW Developer

  • One or more field types are not installed properly. Go to the list settings page to delete these fields.

    Hi Team,
    I have created Administrator -approved Infopath form template to my site and activated same template in CA.
    I have used this template in one of my Form library and i can able to submit the Form with success to the library.
    when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
    I have refered my log files also but there is no useful information in that, please find my logs for your reference.
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Logging Correlation Data      
    xmnv
    Medium  
    Site=/sites/Prototypes
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Monitoring                    
    b4ly
    High    
    Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    General                       
    8kh7
    High    
    One or more field types are not installed properly. Go to the list settings page to delete these fields.
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    General                       
    8sl1
    High    
    DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    General                       
    8kh7
    High    
    One or more field types are not installed properly. Go to the list settings page to delete these fields.
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Runtime                       
    tkau
    Unexpected
    System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.   
    at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
    ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)    
    at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Runtime                       
    tkau
    Unexpected
    ...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Monitoring                    
    b4ly
    Medium  
    Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
    Execution Time=32.443369199158
    w3wp.exe (0x08E4)                       
    0x2C58
    Access Services               
    Data Layer                    
    8jg2
    Medium  
    ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
    w3wp.exe (0x08E4)                       
    0x2C58
    Access Services               
    Data Layer                    
    5pbr
    Medium  
    ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
    w3wp.exe (0x08E4)                       
    0x2C58
    Access Services               
    Data Layer                    
    5pbs
    Medium  
    ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0 
    Diff:0.
    w3wp.exe (0x2D7C)                       
    0x0774
    SharePoint Foundation         
    Topology                      
    e5mc
    Medium  
    WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
    MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
    w3wp.exe (0x08E4)                       
    0x2E24
    SharePoint Foundation         
    Topology                      
    e5mb
    Medium  
    WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
    MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
    Jeeva

    Hello,
    Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
    If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • App says "Evaluatio​n Copy" but ActiveX controls are not evaluation copies.

    App has been running for 3+ years in a Win95 machine. Just moved to Win98 machine and now "Evaluation Copy" appears in app. I have copied the two OCX files from the Win95 machine and registered them on the new machine. I purchased ComponentWorks 3 years ago - I never had evaluation copies of these OCX files. Could this be a Win95 to Win98 problem?

    I doubt that this is a Windows problem; there are several reasons why an ActiveX control could turn to evaluation mode (see KB link below). I would suggest that you uninstall the OCX controls from your new computer and instead run the ComponentWorks installer for proper installation/registration.
    If you have version 3.x or later of the CW controls, you could also run the Measurement Studio License Fixer Utility found in the following Knowledgebase article:
    http://digital.ni.com/public.nsf/websearch/86256A4​7004E16D186256A99007BEFB7?OpenDocument
    This utility will help you diagnose the license state of your controls and will try to fix any broken licenses. Please read the KB carefully as it may not apply to your particular setup.
    If none of the solutions off
    ered here works for you, please email us through http://www.ni.com/ask so we can assist you in a more direct way.
    Regards,
    Azucena Perez
    National Instruments

  • MapPoint Control 11 in Labview Container = Control could not be loaded

    I am working with Labview 6.1 to create an application using a "Microsoft MapPoint Control 11.0" ActiveX component. When I first create a container for it, I can insert the component and it will load and operate correctly. However, after closing the vi and reopening it, the container says "Control could not be loaded", and I need to re-insert the object to get it to work each time. I will need to compile and run this at some point, so I need to fix this problem or ditch Labview now. I have tried reinstalling Labview runtime and the MapPoint Application, but this does not fix the problem. Working with MapPoint as an automation object (without a container) seems to work ok, but I need interactive control through the container. Any suggestions?

    Ankita--
    Yup. Tried that one, as a search of the NI site comes up with reinstall and register as the only solutions for "control could not be loaded" errors ... but it didn't make a difference for me...
    Odd to think that it can run fine right after the control is loaded, but after save/close/reopen, it's not working... hmmm.
    --Brent

  • "One or more field types are not installed properly. Go to the list settings page to delete these fields" while accessing website pages

    We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
    worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates. 
    Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
    properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems. 
    On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps. 
    De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
    Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list. 
    Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
    Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
    However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved. 
    Following are ULS logs:
    Unable to execute query: Error 0x81020014
    One or more field types are not installed properly. Go to the list settings page to delete these fields.
    System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.   
     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
    ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)    
     at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
    pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
    Thanks!

    Hi Shrishail ,
    Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
    Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
    you have to uninstall that field types (retract solution) and deploy it again.
    Thanks,
    Ujjwal

  • ITunes tells me "Could not be used because the original file could not be found. Would you like to locate it?"  I can locate it and all my other music, but can only open one song at a time.  How do I set it to open all my music whenever I want it?

    iTunes tells me my song selection: "Could not be used because the original file could not be found. Would you like to locate it?"  I can locate it and all my other music, but can only open one song at a time.  How do I set it to open all my music whenever I want?
    Message was edited by: Woildbill

    I just spent several hours dealing with this when switching to a new PC. It was extremely frustrating as I knew my files were on my external HD but no matter how many times I copied my old iTunes folder over the files were still missing...because dummy me had forgotten to "unhide folders" on my new PC and my old files were actually stored in a hidden folder created long long ago.
    This is how I did it on Windows 7 with iTunes 10
    1. Look in iTunes Advanced Preferences to see where iTunes is saving files. (Edit, Preferences, Advanced)
         Example: C:/Users/Woildbill/My Music/iTunes/Music
    2. Ensure you are able to see hidden files - Control Panel, Folder Option, View, Show Hidden Files
    3. Use Your Computer's Search Function to Locate the Missing File (Start, Search, type name of song - I started my search in "My Music" folder but be sure to expand to entire Computer if not found right away)
    4. In Search Results, right-click found folder and select properties. This will tell you where the file is actually stored.
    5. Use Windows Explorer (right-click start) to navigate to the location of the file. It is likley your other missing files are in the same location.
    6. In Windows Explorer, copy the newly located files to the iTumes location from Step 1 and everything should work again.
    Hope this helps!

  • INS-40925 - One or more nodes have interfaces not configured with a subnet that is common across all cluster nodes.

    Hi All,
    I am facing the below error while installing Oracle RAC in Silent Mode.
    SEVERE: There are no common subnets represented by network interfaces across all cluster nodes.
    SEVERE: [FATAL] [INS-40925] One or more nodes have interfaces not configured with a subnet that is common across all cluster nodes.
       CAUSE: Not all nodes have network interfaces that are configured on subnets that are common to all nodes in the cluster.
       ACTION: Ensure all cluster nodes have a public interface defined with the same subnet accessible by all nodes in the cluster.
    My /etc/hosts is given below.
    127.0.0.1        localhost    localhost.localdomain
    #Public
    192.168.1.101      rac1        rac1.localdomain
    192.168.1.102    rac2        rac2.localdomain
    #Private
    192.168.2.101    rac1-priv    rac1-priv.localdomain
    192.168.2.102    rac2-priv    rac2-priv.localdomain
    #Virtual
    192.168.1.103      rac1-vip    rac1-vip.localdomain
    192.168.1.104    rac2-vip    rac2-vip.localdomain
    #SCAN
    192.168.1.105    rac-scan    rac-scan.localdomain
    Could you please help me to get rid of the error INS-40925....Any Idea...???

    Hi Ramesh,
    Please find the result of ifconfig -a from both nodes RAC1 & RAC2.
    ifconfig -a in RAC1
    [oracle@rac1 Desktop]$ ifconfig -a
    eth0      Link encap:Ethernet  HWaddr 08:00:27:17:7A:D5
              inet addr:192.168.1.101  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fe17:7ad5/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:102 errors:0 dropped:0 overruns:0 frame:0
              TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:25472 (24.8 KiB)  TX bytes:3322 (3.2 KiB)
              Interrupt:19 Base address:0xd020
    eth1      Link encap:Ethernet  HWaddr 08:00:27:C0:AC:DB
              inet addr:192.168.2.101  Bcast:192.168.2.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fec0:acdb/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:4 errors:0 dropped:0 overruns:0 frame:0
              TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:240 (240.0 b)  TX bytes:816 (816.0 b)
              Interrupt:16 Base address:0xd240
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:56 errors:0 dropped:0 overruns:0 frame:0
              TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:6394 (6.2 KiB)  TX bytes:6394 (6.2 KiB)
    virbr0    Link encap:Ethernet  HWaddr 52:54:00:CC:BD:FB
              inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    virbr0-nic Link encap:Ethernet  HWaddr 52:54:00:CC:BD:FB
              BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:500
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    ifconfig -a in RAC2
    [oracle@rac2 Desktop]$ ifconfig -a
    eth0      Link encap:Ethernet  HWaddr 08:00:27:C9:38:82
              inet addr:192.168.1.102  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fec9:3882/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:122 errors:0 dropped:0 overruns:0 frame:0
              TX packets:59 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:32617 (31.8 KiB)  TX bytes:5157 (5.0 KiB)
              Interrupt:19 Base address:0xd020
    eth1      Link encap:Ethernet  HWaddr 08:00:27:90:B5:A0
              inet addr:192.168.2.102  Bcast:192.168.2.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fe90:b5a0/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:4 errors:0 dropped:0 overruns:0 frame:0
              TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:240 (240.0 b)  TX bytes:746 (746.0 b)
              Interrupt:16 Base address:0xd240
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:56 errors:0 dropped:0 overruns:0 frame:0
              TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:6390 (6.2 KiB)  TX bytes:6390 (6.2 KiB)
    virbr0    Link encap:Ethernet  HWaddr 52:54:00:CC:BD:FB
              inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    virbr0-nic Link encap:Ethernet  HWaddr 52:54:00:CC:BD:FB
              BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:500
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

  • Website browser control could not be loaded in LabVIEW 8.5.1

    Hi Everyone,
    I am using LabVIEW 8.5.1......Recently i started facing problem with ActivX controls...When i place a web browser or month calender on the front panel..there is a message displayed in th middle of the control saying that "Control could not be loaded"....This even affecting the builds am making on this PC....
    what could be going wrong!!!!!!! plz help me out.........
    Regards
    Anil
    Anil Punnam
    CLD
    LV 2012, TestStand 4.2..........
    Solved!
    Go to Solution.

    Hiiii....Naqqash
    I mean to say that there wont be any physical equipment. I want to simulate that physical equipment in the labview i.e. virtually. In detail.... i have one
    equipment for temperature process control with heat exchanger i have studied its characteristics and all........now i want to simulate r design that equipment
    in labview.  Which is nothing but like virtual instrument. I want to design virtual instrument r equipment............
    Thank you........ 

  • Error in MR11: One or more purchase orders were not updated

    Dear Gurus,
    While posting MR11 for a account assigned purchase order i'm facing a error as "One or more purchase orders were not updated" under message ID CKMLGRIR 003.
    Diagnosis: An error occurred during the update. As a result, an entire processing package of purchase orders could not be cleared.
    I checked with the PO and it looks correct.
    What may cause this issue? I'm using 4.6C release.
    Thanks in advance.
    Regards,
    RathiM

    Please check the SAP note below  :
    843022  MR11: Error log, purchase order number is missing

Maybe you are looking for