One or more applications using itunes scripting?
Whenever i close itunes it always says one or more itunes applications are using itunes scripting? please help
Have you got something like iTunes Folder Watch installed and in background monitoring mode? Other possibilities would be any plugin for Firefox/Live Messenger/Other App that posts what you are listening to.
tt2
Similar Messages
-
One or more application are using Itunes scripting interface
After downloading update on ITunes 10 on windows 7 it freezes. Or something pops up and says one or more application are using itunes scripting interface quit.
I tried everything. Help.well, you're the first one I''m seen reporting this, so that makes me think it is unique to your PC. So I doubt an updated iTunes version is going to "fix" this.
The way to find things like this is by using MSCONFIG as explained in these directions. But it is tedious to find it, requires a lot of PC restarting. You said it's not a big deal, so you might not want to spend the time.
http://docs.info.apple.com/article.html?artnum=302538 -
I bought a new Sony Vaio Laptop running Windows 8, 64bit, i7 processor. Everytime I open iTunes and then close out, the following message occurs: (i-tunes message - One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) Then it starts counting down from 20 seconds unless I just click on the (Quit) button. How do I get this to stop? Please be specific, I am challenged when it comes down to computers.
Thank YouThis was extremely annoying for me, also. I started uninstalling unneeded Sony applications to try to narrow down the problem. It turned out not to be a Sony application... it is some functionality built into the bluetooth driver software package by Broadcom. Uninstalling the bluetooth package (via the control panel) takes care of the problem. Itunes also boots up way quicker. But uninstalling it will remove features related to bluetooth and nfc. For me, that isn't an issue, since I don't use them. Since you said you're "computer challenged" I would probably just send an email to sony complaining about the problem. They'll get in touch with Broadcom eventually (the manufacture of the drivers) and get the problem fixed.
Side note: the Broadcom package is huge... nearly 1GB in size. Which is crazy. I can't imagine what it does considering the size of it. Entire operating systems can take up less storage. Also, I have no idea how it starts an itunes plugin without placing it into the standard plugin directories. -
"one or more application is using itunes scripting interface"
Everytime I exit itunes, a windows pops up saying that message. How do I get rid of it? I don't know any programs that maybe using itunes scripting interface. Please help.
well, you're the first one I''m seen reporting this, so that makes me think it is unique to your PC. So I doubt an updated iTunes version is going to "fix" this.
The way to find things like this is by using MSCONFIG as explained in these directions. But it is tedious to find it, requires a lot of PC restarting. You said it's not a big deal, so you might not want to spend the time.
http://docs.info.apple.com/article.html?artnum=302538 -
One or more ports used by the Compute Emulator are currently used by other processes
Environment:
VS 2012 Professional
Azure SDK October 2012
Windows 8
I lost the last few days of my life struggling with a weird issue in the emulator. I just ran out of options and I would really appreciate if someone could help me figure out what's wrong.
I am trying to debug a service package from Visual Studio 2012. It's really just about any package -- even the ones generated from a Windows Azure Cloud Service VS template. Any. The VS debugger starts, and in parallel there's "Starting the Windows Azure Debugging
Environment" dialog which shows "Deploying service package to the Windows Azure compute emulator..." message.
The progress bar shown in the dialog gets stuck for a long time (possibly even for an hour or longer!) at some 60% and then the following error message is shown:
"One or more ports used by the Compute Emulator are currently used by other processes. To resolve this, please see MSDN documentation at http://msdn.microsoft.com/en-us/library/hh472164.aspx"
There doesn't seem to be anything else listening on the ports mentioned on the above MSDN page. I did nevertheless try to re-map devfabric and agent ports by specifying different values in the .config files mentioned on the page, but that did not help.
What I also tried and did not help:
- reinstalled SDK, IIS Express, Local DB
- reinstalled VS 2012 (yes, I got that desperate)
- tried using IIS instead
- used SysInternals TcpView to check if there are any conflicts
- rebooted the machine: the deployment works initially (*once*), and the subsequent deployments fail (!)
- tried to kill all Azure-related processes in memory and restart debugging
- tried looking into log files under the user directory (dftmp\...); no errors in *any* log
- tried looking into Event Viewer logs (Azure-related and in general); no errors either
Since the conflict seems to be related to my current network settings, below is my IP
configuration. I am behind a router and I have DHCP activated, but again that should not matter since none of that has changed in the last few years (and the emulator did work until few days ago).
C:\WINDOWS\system32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : MYCOMPUTER
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
Physical Address. . . . . . . . . : 32-AB-30-66-BC-56
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2a01:e35:8a3a:9970:edd9:b989:b67a:5a8a(Preferred)
Temporary IPv6 Address. . . . . . : 2a01:e35:8a3a:9970:dc7a:4fe6:62a5:e54a(Preferred)
Link-local IPv6 Address . . . . . : fe80::edd9:b989:b67a:5a8a%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Sunday, December 16, 2012 21:26:30 PM
Lease Expires . . . . . . . . . . : Tuesday, December 18, 2012 09:26:14 AM
Default Gateway . . . . . . . . . : fe80::224:d4ff:fea2:9722%12
192.168.0.254
DHCP Server . . . . . . . . . . . : 192.168.0.254
DHCPv6 IAID . . . . . . . . . . . : 253808432
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-1B-EE-4D-20-CF-30-66-BC-46
DNS Servers . . . . . . . . . . . : 192.168.0.254
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{7A96B710-3107-48B9-A7B2-2F261DDD91AD}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fb:1caf:12ff:a75c:5668(Preferred)
Link-local IPv6 Address . . . . . : fe80::1caf:12ff:a75c:5668%14(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
Below are the Azure SDK emulator configuration files, unmodified (as created by the SDK installation).
DevFC.exe.config
<configuration>
<configSections>
<section name="DevFCSettings" type="System.Configuration.NameValueSectionHandler" />
</configSections>
<!-- The following are options related to the SimulatorSetup -->
<DevFCSettings>
<add key="StartMACAddress" value="00155D201928" />
<add key="EndMACAddress" value="155D20193C" />
<add key="StartIPAddress" value="192.168.0.20" />
<add key="EndIPAddress" value="192.168.0.40" />
<add key="DipPoolStartIPAddress" value="127.255.0.0" />
<add key="DipPoolEndIPAddress" value="127.255.255.255" />
<add key="VipPoolStartIPAddress" value="127.0.0.1" />
<add key="VipPoolEndIPAddress" value="127.0.0.255" />
<add key="DefaultGateway" value="192.168.0.1" />
<add key="SubnetMask" value="255.255.255.0" />
<add key="InternalSwitchName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricSwitch" />
<add key="InternalSwitchPortName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricHostSwitchPort" />
<add key="InternalEthernetNICName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricEthernetNIC" />
<add key="InternalEthernetPortMACAddress" value="00155D201927" />
<add key="InternalEthernetPortIPAddress" value="192.168.0.2" />
<add key="InternalEthernetPortSubnetMask" value="255.255.255.0" />
<add key="StorageRoot" value="DFTemp" />
<add key="LogsDirName" value="DevFCLogs" />
<add key="DynamicPortAllocStart" value="20000" />
<add key="ManagementServicePort" value="15095" />
<add key="RepositoryServicePort" value="15096" />
<add key="AgentCallbackPort" value="15097" />
<add key="AgentPort" value="15098" />
<add key="PxeResponderPort" value="15100" />
</DevFCSettings>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
</configuration>
DFAgent.exe.config
<configuration>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
<appSettings>
<add key="AgentMAC" value="00155D201927"/>
<add key="AgentIP" value="192.168.0.2"/>
<add key="EnableActiveNotification" value="false"/>
<add key="StorageRoot" value="C:\DFTemp"/>
<add key="CopyFilesInStartRole" value="false"/>
<add key="LogsDirName" value="DFAgentLogs" />
<add key="EnableFileLog" value="true" />
<add key="AgentPort" value="15098" />
<add key="RuntimePort" value="15099" />
<add key="AgentCallbackPort" value="15097" />
</appSettings>
</configuration>
DFService.exe.config
<configuration>
<configSections>
<section
name="dfservice"
allowExeDefinition="MachineToLocalUser"
type="Microsoft.ServiceHosting.Tools.DevelopmentFabric.DfServiceConfigurationSection, DfService, Version=1.8.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
/>
</configSections>
<dfservice
ManagementServicePort="15095"
RepositoryServicePort="15096"
/>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
</configuration>
Finally, here's what TcpView shows while the emulator is stuck:
devenv.exe 3736 TCP MYCOMPUTER 7240 localhost 15095 SYN_SENT
devenv.exe 3736 TCP MYCOMPUTER 7245 localhost 15095 SYN_SENT
svchost.exe 4332 TCP MYCOMPUTER 7438 MYCOMPUTER 0 LISTENING
System 4 TCP MYCOMPUTER 10000 MYCOMPUTER 0 LISTENING
System 4 TCP MYCOMPUTER 10001 MYCOMPUTER 0 LISTENING
System 4 TCP MYCOMPUTER 10002 MYCOMPUTER 0 LISTENING
DevFC.exe 4380 TCP MYCOMPUTER 15095 MYCOMPUTER 0 LISTENING
DevFC.exe 4380 TCP MYCOMPUTER 15096 MYCOMPUTER 0 LISTENING
DevFC.exe 4380 TCP MYCOMPUTER 15097 MYCOMPUTER 0 LISTENING
DFAgent.exe 14472 TCP MYCOMPUTER 15098 MYCOMPUTER 0 LISTENING
DFAgent.exe 14472 TCPV6 mycomputer 15098 mycomputer 0 LISTENING
DFAgent.exe 14472 TCPV6 mycomputer 15098 mycomputer 6399 ESTABLISHED
System 4 TCP MYCOMPUTER 15099 MYCOMPUTER 0 LISTENING
System 4 TCPV6 mycomputer 15099 mycomputer 0 LISTENING
DevFC.exe 4380 TCP MYCOMPUTER 15100 MYCOMPUTER 0 LISTENING
Thanks in advance for help!
▼
▲
▼
▲Hi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲ -
How to remotely deploy adf application using ant script
Please suggest some pointer on how to remotely deploy adf application using ant script.
I have created automatic inbuild ant script using jdevloper and ojdeploy that create a war file into my adf application deploy folder.
Now i want my war to be deploy remotely on weblogic server.
Is there any inbuld functionality provided by jdeveloper for same.
Can any one please share build.xml for adf application for deploying application remotely.
I try to use wlserver but not much success.
Thanks in advance.
Sumit Bhasin[url http://download.oracle.com/docs/cd/E12839_01/web.1111/e13706/wldeploy.htm]the docs are pretty good.
John -
Hi , I want to acces the documents of one of my apps using Itunes.
I maintain several Ipas and usualy I have acces to the documents.
This time, with this Ipad, I have a scrren offering me to re-install the Ipad or create a new one .
I only want to access documents.........I do not want to reinitialize the Ipad.
can someone help me ?
Regards,I don't recommend you switch to manual management as it is more work for a worse outcome. Play counts and ratings will no longer sync in both directions for example, and should you need to restore the device you will need to work out what has to be synced to it again. The whole point is that if you are syncing the device with selected playlists all management of what does and does not go on to the device can be done in iTunes, whether the device is connected at the time or not. Edit the playlists that you sync to the device, connect it, sync, and you're done. Since you have no need to micro-manage the content directly on the device when it is in sync mode, iTunes doesn't let you.
tt2 -
One or more applications/services require you to verify your Blackberry ID
About once a day, I get a notification, saying: "One or more applications/services require you to verify your Blackberry ID" There are two problems with this message: It does not tell you which application, could be BBM, Blackberry Protect, Blackberry World, anythingIf a user does not want a Blackberry ID, it should be possible to say "Never notify me again". It is very annoying for users without Blackberry ID to get this notification. Especially when you are in "Work Space only" mode, this notification is not wanted.This is an issue with notifications in general, you should be able to switch them off. For example, I don't want to get notified every time the device goes to Battery Saver mode. A "Never notify me again about this issue" option should be implemented.
JSanders wrote:
@johnthurstonI don't want to have to use gasoline for my car, but since it is required, I'm gonna get red lights and warning messages. Same with the BBID, it is required now for these devices. While you may not want to use a BBID, you will get alerted, and without such BlackBerry Protect is not connected as well as other BlackBerry services. But, it is your choice of course.The analogy doesn't quite work. My Blackberry is meeting all of my business needs without a BBID. This is more like my car is continually hassling me about an OnStar subscription I don't want or need. I find it a little hard to fathom that there is no way, other than registering another account for another service I don't need, to make this thing shut up. I'm disappointed that this seems to be the case, but I appreciate you taking the time to respond. -
Rearranging application using iTunes is very slow
I was trying to rearrange my applications on my iPhone using iTunes and everytime I dragged and dropped an application to a new spot iTunes got stuck and the pinwheel of death appeared. I would say that after each drop iTunes became unresponsive for approximately 5 seconds (sometimes longer). I have just upgraded to iTunes 11.1 on my MacBook Pro (Mid 2009) and I also just upgraded my iPhone to iOS 7 (AT&T iPhone 5). Does anybody else have this issue? It makes the feature in iTunes unusable. I got more done faster by just dragging the apps around on my iPhone screen...
This thread discusses what may be the same issue as the one you are having.
-
How do i transfer music from one ipod to another using itunes
how do i transfer music from one ipod to another using itunes
Welcome to the Apple Community.
There is more than one way, but to get it all on all devices, connect the first device to iTunes and choose to transfer the music from the device from the file menu. Once everything is in iTunes connect the second device, select the device in the device list, navigate to the music tab and check the content you wish to sync, click apply/sync. -
cannot update username on ipod for itunes
why are they all different. Why don't I have just one id?
I cannot update apps.
password for username not recognized
I want one apple id for everything
one password for everything
I cannot retrieve or reset anything for itunes to update appsIt appears that you have apps on the iPod that wer purchased with more than one iTunes account. If one from more than one iTunes account need updating, you need to update them one at a time (not update all) until all the remianing apps were purchased from one account. You may need to change the accont the iPId is signed into by go to Settings>Store and signing out and in.
Accounts can't be merged. -
Other programs use iTunes scripting?
My pc runs windows 7. I have 64bit itunes v 10. When iTunes is open I can't use Firefox. It won't run scripts. when I close iTunes it reports other programs are using its scripting. There is a count down and then iTunes closes. There after, Firefox works.
Salut,
you might want to try EphPod. -
Deploy application using ant script vs shell script
Hi,
I work with OAS 10.1.2 and I'm using shell script with dcmctl command to deploy EAR into OC4J but I know that ant script do the same things. I want to know if my choice is good or is it better to use ant script ?
RegardsThis is difficult to decide.
When you have just a few ear files you deploy once in a while a shell script might be sufficient. When developing more complex systems you should use ant as this is easier to maintain.
cu
Andreas -
Can I move music from one computer to another using iTunes?
I have two computers, one I want to retire. Both computers are running iTunes. I want to move my music from the old PC to the new one. I turned on Sharing. I can play music from the old PC on the new one. Can I move the music files within iTunes or do I do a backup/restore of the music outside of iTunes?
The easiest way to do this is with File > Add to Library...
Navigate to the other computer's iTunes Music folder and select everything you want to copy.
Here are more methods: How to move your music to a new computer -
How to backup Apex applications using some script ?
We have Apex 3.1 installed on our server.
We have several workspaces + applications installed.
I wanted to backup all the apex applications in our database, just as a precautionary measure.
I know we can export each application individually using the web login, but I was wondering
if there is any kind of sql script or something which I can run as a batch job in windows which
will automatically backup all the apex applications installed.Does the logical backups of the database what we take include the Apex applications as well ?
So lets say:
Database schema name: abc
apex workspace: abc_ws
applications in that workspace: 1,2,3,4,5
Now at the database level if export the ABC schema and restore it to another database,
will my apex applications are also backed up ?
Maybe you are looking for
-
How to create a sequence based on name, country, city, year, month, number
Hello, I am using Application Express 4.2.1.00.08 I am new to apex and i need some help in creating a sequence. I am creating an application where i profile people and i need to create an auto sequence that when the person is added to the database he
-
I erased my hard disk and then installed the Mac OS X DVD. After having done this I wanted to install the applications too, for which I introduced the Applications DVD. The DVD is recognized and I follow the instructions given. On the last step, the
-
Hi! I'm trying to upload a web gallery from one of my albums on iphoto. I've done this once before and it worked perfectly fine. Now though, everytime I press the web gallery button something pops up asking me to sign in to my .mac account. I say yes
-
My account has been hacked and I have lost control over it. UNFORTUNATELY I am not able to get help without having my login information. The birth dates on my account have been changed along with the email associated with my account. So when I reques
-
hi, can anyone provide me some good links,docs and blogs about SRM XI integration please. and what would be the scenarios with SRM integrations?I mean are they like SAP SRM -XI-R/3(or ECC) SAP SRM - XI----non SAP systems(i have read onb sdn SUS,EBS s