One or more errors were found while trying build the realse version

While i am generating .ipa file i am getting another error mentioned below.
One or more errors were found while trying build the realse version
Packing error while generating .ipa file for iphone.

This is a forum for Adobe Acrobat Froms not the Flash/Flex product.

Similar Messages

Error -4 found while trying to rÃÂ configure m'y export express first generation through windows7

Error -4 mentionned while trying to reconfigure my AirPort express 1st gen through windows 7
Look fo Ã way to succeed

Hey Michel2014,
I found an article that looks like it applies to the issue you're encountering. Check out the following resolution for when you get the message "bad param error -4" when you try to administer your AirPort Express from a Windows computer:
The issue occurs when using AirPort Admin Utility 4.0 for Windows or AirPort Express Assistant 1.0 on a computer with "Intel Centrino mobile technology" wireless capabilities. To resolve the issue:
First, download AirPort 4.1 or later. Next, try checking the Network Connection that you use to connect to the AirPort Express (usually this is your wireless connection) to ensure that it is configured via DHCP; if it is set for a static IP on a different subnet from the AirPort Express, this issue will occur.
If your issue is still unresolved, use this workaround:
Connect the computer to the Airport Express using an Ethernet cable.
Turn off wireless networking on the computer.
Set the computer to use the Ethernet port (restart if necessary).
Configure or update your AirPort Express.
After a successful update, switch from Ethernet back to your wireless configuration.
Important: Information about products not manufactured by Apple is provided for information purposes only, and does not constitute Apple's recommendation or endorsement. Please contact the vendor for additional information.
AirPort Express: "Bad param error -4" when administering from a Windows computer
http://support.apple.com/kb/TA21550?viewlocale=en_US
Cordially,
David

CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack:   at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
Seb

Hi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I can not publish my software I get "_An error occurred while signing: Failed to sign bin\Debug\app.publish\\setup.exe. SignTool Error: No certificates were found that met all the given criteria."

Error 2
An error occurred while signing: Failed to sign bin\Debug\app.publish\\setup.exe. SignTool Error: No certificates were found that met all the given criteria.
Yesterday I could publish, today no code changes, but I get the above error.
Help

Hi El-sid,
So glad that you have solved your issue, and thanks for your sharing.
Have a nice day.
Best Regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can't do online banking. Get error message. "The requested URL /Summary.cgi was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

I can't do online banking. When I try to open the page I get error "The requested URL /Summary.cgi was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Hi,
These blog posts might help debug problem
Oracle APEX: Got a 404 Not Found? | Inside Oracle APEX by Patrick Wolf
daust_de :: Oracle XE / APEX: Troubleshooting the 404-not found error on XE
Regards,
Jari

404 Not Found error was encountered while trying to use an ErrorDocument to handle the request

When I try to go to my website, I get a blank screen and this message:
Method Not Implemented
GET to / not supported.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Can anyone help me fix this bug, please? Thanks!

I did as you said and it worked magic! I didn't even have to restart Mozilla. Thank you so much for your help! :-)

Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

Greetings All,
I am having issues with a SharePoint Designer workflow. This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow. I'm developing this as a SharePoint 2010 workflow because I need to do
impersonation.
The environment and workflow have been running, in the past week, without issue. I went to add a couple steps and now I cannot publish the workflow. While in SharePoint Designer, I receive the error:
"Errors were found when compiling the workflow. The workflow files were saved but cannot be run." When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow."
That is all the error information I have available; nothing is in the log files.
I have investigated this error and tried the following:
Cleared the SharePoint Designer cache.
The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000. Restarted the servers (which may not have been necessary) and tried again receiving the same error. I then increased it to 30000 with the same error result.
Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
I reboot the servers and try again and now I can publish the small test workflow but not the original. However, neither will run. When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
An unexpected error occurs. I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
Also, now no workflows can be published in this web app. Not just the one I was working on but none of them!
Does anyone have a clue what has happened to the SharePoint 2010 workflow service? Or some suggestions for me to try?
Thank you in advance for your help!
Bob Mixon

try these links:
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
Hi Sagar,
I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
Your first link is specific to SharePoint 2013 workflows.
Your second link refers to the UserDefinedWorkflowMaximumComplexity. If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
Your third link also refers to large workflows with many approval activities. My workflow doesn't contain any approval activities.
And you fourth link refers to 2013 workflows not 2010.
My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
Thank you...

CS4: Unable to install any CS4 product. error:"critical errors were found in the setup"

I am trying to install adobe photoshop and dreamweaver CS4 on my windows xp. But both of them during the loading of setup file returns the following error:
"Crtical errors were found in the setup. check the setup log file for details."
I checked the log file and found the following lines relevant to the error:
C:\Program Files\Common Files\Adobe\Installers\acce07fd2c8fe7f9e3f26243e626578\resources\scripts\
Property(S): sessionID = acce07fd2c8fe7f9e3f26243e626578
Property(S): ProductVersion = 2.0
Property(S): Manufacturer = Adobe Systems Incorporated
Property(S): ProductLanguage = 0
Property(S): ProductCode = {14AFE241-FC6E-4FDB-BCA0-7AD6F4974171}
Property(S): installLanguage = undefined
Property(S): LanguageIndependent = 1
Property(S): ALLUSERS = 1
Property(S): overrideFile = 0
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): REBOOT = ReallySuppress
Property(S): ExitWorkflow = 0
Property(S): AddRemoveInfoDriverAdobeCode = {07CD1281-D5ED-4BB4-8964-7B4F1F36315D}
Property(S): AddRemoveInfoDisplayName = Adobe Dreamweaver CS4
Property(S): AddRemoveInfoDisplayVersion = 10.0
Property(S): AddRemoveInfoPublisher = Adobe Systems Incorporated
and after few more lines........
Critical errors were found in setup
TypeError:'undefined' is null or not an object
Please see the Setup log file for details.
I don't what's the problem. many people have this problem but they had not found the relevant thing in the log file. With this information provided please tell me what to do????

Download the clean u script for CS 4 fro the Adobe site you have to search for it.
Then try this, create a new user account and log in to this account and the try to install from there.
Since this ihe Mac forum I assume yu are on a Mac so if that fdoes not work try a safe boot and then install.
A Safe Boot is rebooting while holding down the shift key until you see the safe boot welcome screen.
then try to install.
Oops this is the illustrator forum cross platform sorry I do not know how to safe boot on the PC.

Critical errors were found in setup. Please see setup log file for details.

What fixes this problem in IE? I have read a lot of forums with many replies saying they got by it, but they never explain how. One guy posted a link, but the link is dead now.
I need to know how to fix this problem. Only thing I can gather is its a Java issue, but my java is up to date. In fact I just reinstalled it make sure that it was updated.
With as many people having this issue I can't believe I have not found something from Adobe on this issue.
Regards,
Scott

I run the setup file and it does the checking system process... then goes into the actual install menu and not more than 10 seconds into that 2nd menu I get "critical errors were found in setup. Please see setup log file for details". That is all I can get out of the install.
The message window that I get the error in indicates windows Internet Explorer.
That is the my entire process. I have searched and found the log file and I have looked through it, but I am having a hard time finding the actual cause of the error. Out of shear frustration I removed all my adobe products and tried the install again and had the same exact problem. So I know there is something stopping me some where... just don't know what it could be.
Thanks,
Scott =

One or mor parameters were not specified for the subreport

I have a main report that has a sub report. It all seems to work fine, except that I get the error "One or mor parameters were not specified for the subreport" when the second page of the report is rendered. So I verifed that all the
parameters for both reports are setup correctly, looked at the data to see if it that was causing the issue, etc.... I found nothing.
Then I came across this article.
http://www.analyticsby.me/2009/10/one-or-more-parameters-were-not_09.html
So I changed all the parameters on the sub report Available Values to none. Now it works without issues.
My problem is that the sub report needs to be run independently. By setting the Available Values to none, the user is unable to select values for the parameters. This is not acceptable.
I suppose I could create a duplicate report to use as the sub report, with all the Available Values set to none for the parameters, but that means I need to maintain two reports instead of one.
This has to be a bug.
Anyone come across this situation?
Bill Behning

Hi Bill,
Sorry for the delay.
Based on my test, the error message hints that either the report parameter has not been passed from the main report to the subreport or that the wrong format of report parameter or an unacceptable value for the report parameter has been passed from the main
report to the subreport.
When passing the parameter from the main report to subreport, we can grant the parameter to Available values in the subreport. While the values passed should be contained by Available values of the parameter in the subreport. In this case, the error won't occur.
In other words, the parameter in the subreport can contain Available values.
If I have any misunderstanding, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

I got the Mac error code -36 while trying to move a backup file

I got the Mac error code -36 while trying to move a backup file (made by Time Machine) to another drive. The full text of the error message is:
The Finder can’t complete the operation because some data in “boot.efi” can’t be read or written. (Error code -36)

It's a disk error. Although Apple documentation says you should be able to copy Time Machine backups in the FInder, that doesn't necessarily mean it will work. I suggest that, instead of copying the existing backup, you start a new one on the other drive, and keep the old one. You need more than one backup anyway.

Errors were found when compiling workflow in SharePoint Designer 2010

Hello there,
I've run into a interesting issue in SharePoint Designer 2010 when publishing a workflow. I now get the below error
Normally when I get this message I simply clear the SharePoint Designer 2010 cache described in this
article, however, in this case the issue still continued. Hence I started the process of trial and error and quickly realized that the Update Item action was the culprit. In this action I am updating approximately 70 columns. Currently, I have two such
actions running in sequence. When I added the third Update Item action to do the same, I started getting this error.
Has anyone else experienced this before? In the workflow I am currently working on I am going to have to using the Update Item action several times and update approximately 70 columns hence I am open to other ideas to do the same.
Thanks in advance.

Hi Entan Ming,
Thanks for your reply, Hope you are aware that while we create any new workflow using SharePoint Designer 2013. There are two ways (We can say Platforms) to create the new workflow 1. SharePoint
2010 and 2. SharePoint 2013.
If I choose second one I. e SharePoint 2013, and try to create, save and publish workflow it`s working fine. But whenever I select option no. 1 i.e. SharePoint 2010 Platform to create
the workflow, I am able to Create it , save it , but while I try to publish it I got an error:
Errors were found when compiling the workflow. The workflow files were saved but cannot be run.
When I click on Advance I got message:
Unexpected error on server associating the workflow
My question is that, I am not able to publish any workflow in SharePoint 2010 Platform, using SharePoint Designer 2013.
Before publishing a workflow, I click on ‘Check for errors’ button, there was no any error found.
Thanks & Regards Mr. Bajirao Shinde

Solaris 10 wont install - One or more disks are found

Hi,
Hi I am new to installing Solaris on a E450 server.
I place the cdrom and type boot cdrom
Answering questions about network region etc.
The installer starts the installation and comes with an error:
One or more disks are found, but one of the
following problems exists:
> Hardware failure
> Unformatted disk.
So no installation.
How do I solve this?
I have tried different disks and even to format the disks.
I have had FreeBSD running on this system without any problem.

The solution:
If you��re trying to install Solaris (SPARC) on a disc which previously had another O/S (*BSD) on it, you will more then likely come across the following error after the system identification stage is complete:
One or more disks are found, but one of the following problems exists:
> Hardware failure
> Unformatted disk.
The problem is to do with the disc label, at the shell fireup format with the e switch
format -e
select the disc which you are trying to install onto, if you are told that the disc doesnt not contain a disk label, would you like to write a lablel, say yes & specify the type as SMI Label, If youre not asked about the label & presented with a menu, goto the partition section, choose label, specify the type as SMI.
quit & reboot & all should be well

One or more frames were dropped during playback???

I have finally complete my movie.... now when I play it back there are two clips which produce this error message:
"One or more frames were dropped during playback"
It tells me I can:
"Turn off unlimited RT" (which is off)
"lower compression data rate" (no idea what that is)
"Close open sequences" (but Im working with the only one open)
"lowering preference for real-time audio tracks" (??)
"increase speed of system..."
Any suggestions on an easy fix? The clips worked before... I think it was when I added a transition that they stopped working. I took out the transition but nothing changed. I even tried to delete the clips and recreate them from the original source saved on my comp. Thanks in advance!

Sounds like your drive is fast enough? Are you playing back rendered material or unrendered? Are you using Unlimited RT or Safe RT?

Errors were found when compiling the workflow

My company has consolodated many SharePoint sites into one with many subsites to save money. I ported my existing libraries from theold site to the new site (Same version of SP). The workflows did not go with the libraries, as expected. I re-created each
workflow, and every time have gotten the same error message: "Errors were found when compiling the workflow. The workflow files were saved but cannot run."
When I click Advanced I see some variation of the following:
(-1, -1) Compilation failed. Could not find file 'C:\Users\TEMP.*domain*\AppData\Local\Temp\ **and then a different .dll file every time'
I have not seen any other examples of this online. For some, creating a new task and history list for the workflow allowed it to compile, but not always.

Hi,
According to your post, my understanding is that Errors are found when compiling the workflow.
I recommend that you can check whether the file exists under the path 'C:\Users\TEMP.*domain*\AppData\Local\Temp\”.
If it exists, you can create a silmple workflow to check whether it works.
If it does work, you can add executionTimeout property in web.config file to increase the timeout interval(Make a copy of the web.config file before editing anything).
For more information, please refer to:
Manjuke's Blog: Fixed: SharePoint Designer Error - Unexpected error on server associating the workflow
SharePoint Designer 2010 Errors were found when compiling the workflow. The workflow files were saved but cannot be run. Unexpected error on server associating the workflow.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

One or more errors were found while trying build the realse version

Similar Messages

Maybe you are looking for