"One or more field types are not installed properly" when I try to add a second discussion board web part to a page

I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
(one is open to all for comments, and one is open only to the project team to post but everyone can read).
When I go to the pages for each of the discussion boards, they work fine.
But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
One or more field types are not installed properly. Go to the list settings page to delete these fields.
Correlation ID: blah blah blah
I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list. I tried doing it from SPD with the same result.

I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question.

Similar Messages

One or more field types are not installed properly. Go to the list settings page to delete these fields.

Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
Jeeva

Hello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

One or more field types are not installed properly. Go to the list settings page to delete these fields. nativehr 0x81020014 /nativehr nativestack /nativestack

Hi ,
I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
StackTrace = " at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
String bstrViewName, String bstrView...
I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
public override void Execute(Guid targetInstanceId)
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(sourceUrl))
using (SPWeb web = site.OpenWeb())
//gets the document lib
SPList listFrom = web.Lists[sourceList];
//gets the expired documents items
SPQuery query = new SPQuery();
query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
SPListItemCollection items = listFrom.GetItems(query);
//if expired items found
if (items.Count > 0)
SPFile oFile = null;
foreach (SPListItem item in items)
string strfile = item.File.Name;
oFile = web.GetFile(sourceList + "/" + strfile);
//oFile.CopyTo("Archive/" + strfile);
oFile.MoveTo(destinationList + "/" + strfile);

Hi,
I think the issue is related to the internal name of the Expiration Day.
In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
We can download the tool here: http://www.camldesigner.com/?p=594
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

"One or more field types are not installed properly. Go to the list settings page to delete these fields" while accessing website pages

We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!

Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal

One or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.

hi All,
i have one of the requirement for an application, we do upload some release not in file server and that is used in application link to see the note. in this note i have converted the Excel into .HTM format(web page). this was working fine, but from last
two days all of a sudden we are recieving error as above.
one or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.
could anyone please help me on this.
Thanks and Regards,
krishnamurthy

Hi,
Actually Arnavsharma provided a operable method for you. But no luck, it's not invalid.
Here I also offer you an method you can try.Please delete the extra (parasite) zone from the Zones subkey :
Click Start , click Run , type regedit , and then click OK
Expand the following registry subkey
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones
Delete the extra (parasite) zone from the Zones subkey
Note: The parasite zone is a pseudo-graphic number listed before zone number 0. The pseudo-graphic number looks like a miniature upper case "L"
Close the registry editor
Thanks!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Adobe acrobat has recovered one or more documents that were not saved properly

Hello,
I am getting the following error and cant seem to fins anything about it anywhere
"Adobe acrobat has recovered one or more documents that were not saved properly before Acrobat was shut down click yes to open the recovered document click no your changes will be lost. "
This comes up numerous times a day. Does anyone have any idea to what it might be related to? Some seting? Looking for a direction to troubleshoot.
Running Acrobat X standard, fully updated, Windows 7.

Same problem.
Clicking yes or no does not stop the pop up to come over and over again.
Copied the file "unsaved", renamed it and deleted the "unsaved" one.
No success, pop up with message Adobe acrobat has recovered one or more documents that were not saved properly continues
It is very disturbing when working with tough deadlines
Using Acrobat Pro 9.5.5 (updated)
Please help

Adobe Acrobat recovered one or more documents that have not been properly recorded before the Acrobat stop.

When opening any .pdf with Adobe Acrobat Reader the following error comes.
Error Message: Adobe Reader has recovered one or more documents that were not saved properly before Reader was shut down. Click Yes to open the recovered documents. If you click No, your changes will be lost.

Adobe Reader or Adobe Acrobat?

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

Sharepoint 2013 Discussion Board Web Part, Subject line link on Home Page does not link to the list view

I am by no means a SharePoint developer, but I really wanted to customize the discussion board for my site - so I found this link: http://www.codeproject.com/Articles/733164/How-to-create-HelpDesk-on-SharePoint-Online
I added the columns, like the article said, and then completed the section "Modification of the discussion board views". I skipped the workflow stuff because while I think it would be useful I wanted to make sure I could get
the actual customization of the discussion board to work first.
My Problem (Just to preface - I followed the above instructions, including disabling the Minimal Download Strategy):
When I clicked into my discussion board list, I was able to get it to look and function as described for both the subject and flat views. However, when I click on the Subject, from the Discussion Board Web Part on my Home Page, it does not redirect into the
Discussion Board List Flat View. Instead, it tries to open the root folder from the Home Page while still using the subject view. The outcome being an empty discussion board on the Home Page.
So I decided to create a whole new discussion board to see if that one would work, when I inserted a new Discussion Board Web Part into the Home Page, newly created from the app menu, it used the same custom JS file(plumTickets), even though I never linked
the discussion board to the JS file. Of course when I went into the newly created Discussion Board list it opened as it does OOTB.
I am so close it having this work like I have been envisioning. I just need users to be able to click on a discussion subject from the Home Page and be redirected to the list view of the parent folder (I think that is the correct terminology,
but it may not be) so they would be able to see any replies and be able to reply. Please Help Me!!!
I truly appreciate any help you are able to provide, thank you!

I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question.

How to add the Note board web part to a page with powershell

Hi everyone,
I've been looking around everywhere but haven't seen it explicitly mentioned.
Does anyone know how to add the Note Board web part to a Team Site page, e.g. Non-publishing site, Left Zone, First webpart in the zone in powershell?
Examples like this one http://adicodes.com/adding-web-part-to-page-with-powershell/ only talk about custom web parts uploaded from a local drive.
The example here looks good - http://spcrew.com/blogs/lists/posts/post.aspx?id=21 but is it for the Page Viewer Web Part. How would you go about getting the correct name for the note board web part and configuring it?
Many Thanks,
Ashley
function main(){
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
$url = "http://sp2010dev1/sites/test1"
$OpenWeb = Get-SPWeb $url
$OpenWeb
$OpenSite = Get-SPSite $url
$file = $OpenWeb.GetFile("http://sp2010dev1/sites/test1/SitePages/test1.aspx")
$WebPartManager = $file.GetLimitedWebPartManager([System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
Add-PageViewerWebPart "http://sp2010dev1/sites/test1" "http://sp2010dev1/sites/test1/SitePages/test1.aspx" "Body" 0 "SPCrew Site" "sp2010dev"
$OpenWeb.Dispose()
function Add-PageViewerWebPart($SiteURL, $pageUrl, $webpartzone, $index, $title, $content)
    $site = new-object Microsoft.SharePoint.SPSite($SiteURL)
    $web=$site.OpenWeb()
    $webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
    $webpart = new-object Microsoft.SharePoint.WebPartPages.PageViewerWebPart
    $webpart.ChromeType = [System.Web.UI.WebControls.WebParts.PartChromeType]::TitleOnly;
    $webpart.Title = $title
    $webpart.ContentLink = "http://www.spcrew.com";
    $webpartmanager.AddWebPart($webpart, $webpartzone, $index);
    $web.Close()
    $site.Close()
function Get-SPSite([string]$url) {
    New-Object Microsoft.SharePoint.SPSite($url)
function Get-SPWeb([string]$url) {
    $SPSite = Get-SPSite $url
    return $SPSite.OpenWeb()
    $SPSite.Dispose()

Hi,
According to your post, my understanding is that you wanted to add the Note board web part to a page with PowerShell.
The name of the Note Board web part is SocialCommentWebPart.
I recommend to use the powershell code below:
$pageUrl="http://sitename/SitePages/test.aspx"
$SiteURL="http://sitename"
$site = new-object Microsoft.SharePoint.SPSite($SiteURL)
$web=$site.OpenWeb()
$webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
$webpart = new-object Microsoft.SharePoint.Portal.WebControls.SocialCommentWebPart
$webpart.title="Note Board"
$webpartmanager.AddWebPart($webpart, "MiddleZone", 0);
$web.Close()
Then the Note board web part will be added to the page.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Field type TaxonomyFieldTypeMulti is not installed properly when opening Site columns page or saving site as template

I have a site collection which I am moving from a SharePoint 2013 enterprise server to a SharePoint 2013 foundation server. This all seems fine apart from when I try and access the Site columns page (from Site settings) or when I save a Site as a template
- both times I get the error: Field type TaxonomyFieldTypeMulti is not installed properly
If I look in the SharePoint logs I get the following:
Unable to locate the xml-definition for FieldName with FieldId '249a1c1a-5a3e-4173-abad-779b01892510
Any ideas?
Many Thanks,
Jenny

I have re-done the migration from Enterprise to Foundation and now get the following error:
Field type RatingCount is not installed properly. Go to the list settings page to delete this field.
However I cannot go to the Site columns page as I get this error so don't see where I can delete this from? Previously I had to delete this field manually from each of the Blog sites but this time there don't
appear to be these fields to delete - I presume because I disabled all the features relating to this premigration?
Any ideas?
Many thanks in advance,
Jenny

Some of the drivers from the os x disk are not installing properly?

I recently use bootcamp to partition my hard drive. Windows XP installed just fine. I inserted the os x disk like it says to do in the instructions. It told me I needed an updated installer but failed to update. I went into the contents of the CD and began to install the drivers individually. Now some drivers, like the i-sight camera one, did not install properly and im ok with that. But, the ATI drivers, and the Nvidia drivers, the ones I need to play many games (the whole reason I partitioned my hard drive) did not install properly. They installation processes told me that it did not detect the correct drivers for the installation and would now shut down (the nvidia one) and the ATI one failed from almost the beginning but attempted to finish the installation, and failed agian. Any suggestions, ideas, or comments on how I could fix this problem or install these drivers another way would be greatly appreciated!

(sigh) bumb, come on? doesn't anybody have an idea?

AirportAtheros.kext not installed properly when I re-install OSX

Hi
I recently bought a MacBookPro C2D and it was all working fine until all of a sudden it no longer opened .dmg files. after a while i rebooted and it wouldn't restart. so after a stress i reinstsalled OSX... that fixed the .dmg problem but now when i start a box comes up and says the airportAtheros.kext file was not installed properly...
the computer now doesn´t recocnise that i have airport and whats more i can´t even find the airportatheros.kext file when i use pacifist to to open the OSX disc!!!
by the way i installed the latest airport update before all this happened and now afterwards too.
any suggestions would be welcome
thanks alot
MacBook Pro 2.33 C2D Mac OS X (10.4.8)

ok i repaired the disk permissions with disk utility and it´s all working sweet now...

Windows 7 professional - one or more audio services are not running

I have a windows 7 professional laptop. The audio stopped working suddenly. When i click on the audio icon (with a red x on it) the system tried to troubleshoot the problem. This is the error i see in the troubleshooter.
One or more audio services isn't is running
I tried to start the windows audio, windows audio endpoint builder. Neither of them started but gave some error.
When i tried to restore to a previous version i got an error message that there are some bad sectors on the C drive but could not run the checkdsk on that drive. Instead windows offered me to run it at next reboot. I did multiple reboots but the chkdsk never
ran.
I am don't have a windows reinstall disk. Can somebody point me where i can get the windows OS to reinstall it?

Hi,
You can contact the Original Equipment Manufacturer (OEM) of your computer for obtaining
replacement disks and manuals.
For computer manufacturer contact information,
visit the following Microsoft Web site:
http://support.microsoft.com/default.aspx?pr=oemphone
More information about How to replace Microsoft software or hardware,
order service packs, and replace product manuals, please see the following KB article:
http://support.microsoft.com/default.aspx?kbid=326246
Hope it helps.
Tracy Cai
TechNet Community Support

Am prompted to authorize iTunes account in order to play music, however passwords are not accepted and when I try to recover password, I am told that the Apple ID does not exist. How do I get my songs to play?

Hi everybody, I just recently upgraded my laptop and now can't play my music anymore. I bought the music years ago on an Apple ID that I haven't used for a while and even though I have a password written down, it doesn't seem to be the correct one. Furthermore, when I try to reset the password and send an e-mail to this old Apple ID, I don't receive anything and thus cannot even reset the passwort. Lastly, neither my, nor my mother's birthdate will work for security questions in order to reset the passwort. I really don't care about the account, I just want to get my music back! So if anybody either knows how to (re?)activate this Apple ID OR how to get my music playable both on my laptop as also on my other Apple devices without having to deal with this old Apple ID, I'd be super thankful for any help or tips!

Click here and ask the iTunes Store staff for assistance.
(102488)

"One or more field types are not installed properly" when I try to add a second discussion board web part to a page

Similar Messages

Maybe you are looking for