One or more tasks were running when ADE has abnormaly terminated. Do you want to resume pending tasks?

I'm having the following message when tiring to download an ebook from the library.  Can anyone give me a solution to this problem?

Contacted Adobe support who gave me a list of instructions which included uninstalling Digital Editions, deleting registry files, deleting ebook files (after saving them elsewhere), emptying trash folder and rebooting (unfortunately this didn't work).
However when I carried out a simple system restore (start > all programs > accessories > system tools > system restore) and went back to a restore point before I had authorised Digital Editions this worked and I was able to access all my ebooks again.

Similar Messages

  • One or more tasks were running when ADE has abnormally terminated

    I have seen several normal downloads on this PC with XT SP3 so know what it looks like. 
    Have protection software running: DSL modem firewall on, windows firewall on, AD-Aware free, AVG virus free, Winpatrol free, SpyBot-SD Resident free
    Also my notebook with Windows 7 allows downloads with same authentication.
    I attempt download and ADE starts with download indicator which terminates prematurely, then get two error messages:
    1.
    One or more tasks were running when ADE has abnormally terminated. Do you want to resume pending tasks?
    and when I select yes...
    2.
    Error getting license
    Server communication problem: E_ADEPT_10

    This can occur if a setting somewhere isn't allowing ADE to do what it
    wants to do.  The error message you included from ADE does not seem
    complete, but I'll take a flier and 'assume' that the message is trying to
    tell you that software on your machine is blocking at least a portion of
    the download.  THIS LINK
    <http://technology.myblogzone.info/2011/01/how-to-solve-the-error-getting-license-message-i n-adobe-digital-editions/>
    may
    have the information that will help clear up the issue.  One can hope,
    anyway....
    ==============

  • One or mor parameters were not specified for the subreport

    I have a main report that has a sub report.  It all seems to work fine, except that I get the error "One or mor parameters were not specified for the subreport" when the second page of the report is rendered.  So I verifed that all the
    parameters for both reports are setup correctly, looked at the data to see if it that was causing the issue, etc....  I found nothing.
    Then I came across this article. 
    http://www.analyticsby.me/2009/10/one-or-more-parameters-were-not_09.html
    So I changed all the parameters on the sub report Available Values to none.  Now it works without issues. 
    My problem is that the sub report needs to be run independently.  By setting the Available Values to none, the user is unable to select values for the parameters.  This is not acceptable.
    I suppose I could create a duplicate report to use as the sub report, with all the Available Values set to none for the parameters, but that means I need to maintain two reports instead of one.
    This has to be a bug.
    Anyone come across this situation?
    Bill Behning

    Hi Bill,
    Sorry for the delay.
    Based on my test, the error message hints that either the report parameter has not been passed from the main report to the subreport or that the wrong format of report parameter or an unacceptable value for the report parameter has been passed from the main
    report to the subreport.
    When passing the parameter from the main report to subreport, we can grant the parameter to Available values in the subreport. While the values passed should be contained by Available values of the parameter in the subreport. In this case, the error won't occur.
    In other words, the parameter in the subreport can contain Available values.
    If I have any misunderstanding, please feel free to contact me.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • One or more frames were dropped during playback???

    I have finally complete my movie.... now when I play it back there are two clips which produce this error message:
    "One or more frames were dropped during playback"
    It tells me I can:
    "Turn off unlimited RT" (which is off)
    "lower compression data rate" (no idea what that is)
    "Close open sequences" (but Im working with the only one open)
    "lowering preference for real-time audio tracks" (??)
    "increase speed of system..."
    Any suggestions on an easy fix? The clips worked before... I think it was when I added a transition that they stopped working. I took out the transition but nothing changed. I even tried to delete the clips and recreate them from the original source saved on my comp. Thanks in advance!

    Sounds like your drive is fast enough? Are you playing back rendered material or unrendered? Are you using Unlimited RT or Safe RT?

  • One or more errors were found while trying build the realse version

    While i am generating .ipa file i am getting another error mentioned below.
    One or more errors were found while trying build the realse version
    Packing error while generating .ipa file for iphone.

    This is a forum for Adobe Acrobat Froms not the Flash/Flex product.

  • The response is used by one or more tasks!!!!

    Hi everyone,
    I have a strange problem but i have no clue on how to solve this. In my existing process definition I want to modify description of one of the response codes. But it doesnt allow to save this process definition and says
    "The response is used by one or more tasks". Is there any way i can modify the response codes.
    Thanks,
    doki

    If at any point the response has been used, it is now in the audit logs and lists of tasks that have occured. If you want to change the responses, you would have to do an if statement at the end of your adapter to check for the normal response, and if it is equal to that, return a different response. Then you will be using the new response code and can change the description.
    -Kevin

  • HELP!!!  Message - (One or more applications are using the iTunes scripting interface. Are you sure you want to quit?)  How do I get this to stop?

    I bought a new Sony Vaio Laptop running Windows 8, 64bit, i7 processor.  Everytime I open iTunes and then close out, the following message occurs: (i-tunes message - One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) Then it starts counting down from 20 seconds unless I just click on the (Quit) button.  How do I get this to stop?  Please be specific, I am challenged when it comes down to computers.
    Thank You

    This was extremely annoying for me, also.  I started uninstalling unneeded Sony applications to try to narrow down the problem.  It turned out not to be a Sony application... it is some functionality built into the bluetooth driver software package by Broadcom.  Uninstalling the bluetooth package (via the control panel) takes care of the problem.  Itunes also boots up way quicker.  But uninstalling it will remove features related to bluetooth and nfc.   For me, that isn't an issue, since I don't use them.  Since you said you're "computer challenged" I would probably just send an email to sony complaining about the problem.  They'll get in touch with Broadcom eventually (the manufacture of the drivers) and get the problem fixed.
    Side note: the Broadcom package is huge...  nearly 1GB in size.  Which is crazy.  I can't imagine what it does considering the size of it.  Entire operating systems can take up less storage.  Also, I have no idea how it starts an itunes plugin without placing it into the standard plugin directories.

  • How can I turn off the "this application's signature HAS been verified do you want to run it?" message?

    I'm running Firefox 22.0 on the Mac, OS X 10.6, Java 6 SE fully updated on the Mac. I have corporate web sites I must use throughout the day that have Java applets associated with them, one of them being the Ephox web text editor. EVERY TIME I open a page that has the editor being invoked on it, I get FOUR messages that say "This application's signature has been verified. Do you want to run this application?" Two of them will have the name of the editor. Two of them will have blanks. ALL of them show "ALWAYS TRUST content from this publisher" as checked. RUN, RUN, RUN, RUN.
    Although I have a number of addins installed, I have had to disable them to get these apps to load without crashing.
    NOTE that this does not happen in Firefox 22 on Windows 7; nor did it with the same apps (no upgrades at the corp. website) on Firefox 18 or 19 on the Mac.
    Help???

    We are sorry this is more like a Java issue than a Firefox one.
    However, I found this that may be helpful to solve your problem, check it out: [http://stackoverflow.com/questions/1472494/suppressing-applications-digital-certificate-has-been-verified-do-you-want-to-ru http://stackoverflow.com/questions/1472494/suppressing-applications-digital-certificate-has-been-verified-do-you-want-to-ru]

  • While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this Iphone (-35) an error has occurred.  Do you want to continue with altering this Iphone? When you continue al the material on this I

    While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred.  Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
    I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
    Please can somebody help me, so I can make backup.
    Greetz,
    Derk

    It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
    from: http://support.apple.com/kb/HT4946
    The folder where your backup data are stored varies depending on the computer's operating system.   Make sure the backup folder is included in your periodic data-backup routine.
    iTunes places the backup files in the following places:
    Mac:  ~/Library/Application Support/MobileSync/Backup/
    Windows XP:  \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
    Windows Vista and Windows 7:  \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

  • PROBLEM-ONE OR MORE FRAMES WERE DROPPED DURING PLAYBACK... HELP...

    Hallo...
    I am very new in the Final Cut Express... I import .MOV documents in my computer and then to a new Project in the FCE... I move to the viewer the pieces I want to create, then when I try to see them it reports me the PROBLEM " ONE OR MORE FRAMES....",
    I import data from a Canon EOS 500D....
    When I do the same in the Imovie it has no problem...
    I read somewhere that "The two specifications are completely different. Your media is not support for editing in Final Cut. It's the wrong frame size, frame rate, and codec. The media should be converted to the Apple Intermediate Codec at 1280x720 29.97fps. You need to use a sequence preset that matches that. Apple does not support the use of USB drives with video applications."
    I dont know what are all these... but I tried to change in the EASY SETUP of FCE everything and try it to see if something happens... IT HAS NOT Apple Intermediate Codec at 1280x720 29.97fps IN THE EASY SETUP....
    I CANNOT UNDERSTAND.... I HAVE A CANON HD VIDEO MACHINE.... I JUST WANT TO IMPORT MY VIDEOS... MAKE SOME SIMPLE CHANGES, CREATE A VIDEO.... IN ORDER TO USE IT IN MY JOB... WHY IT IS SO HARD WITH FCE??????????????? IT DOES IT IN THE IMOVIE..... SO HERE WHAT IS THE PROBLEM....
    AND IF SOMEONE WANT TO ANSWER PLEASE CONSIDER THAT I AM NEW IN THIS PROGRAM ... I AM GREEK AND I DON'T UNDERSTAND PERFECT ENGLISH.... SO BE SIMPLE AND EXPLAIN WITH SIMPLE STEPS HOW IS THE PROBLEM SOLVED....
    I READ IN THE FORUM OTHERS HAVING THE SAME PROBLEM AND YOU WERE NOT ACTUALLY VERY HELPFULL......

    What you read is absolutely correct. You need to use a conversion app, such as MPEG Streamclip (http://squared5.com) to convert the H.264 files from the Canon into Apple Intermediate Codec files, based on the frame rate and resolution you shot the footage in.

  • Wish Lion did not open all the programs that were running when I shut down.

    No way to stop lion from re-opening programs and files where I left off. Hate that. Anyone know how to stop it?

    If you want to permanently avoid having to uncheck the "Reopen windows when logging back in" checkbox at each shutdown, you may consider doing this:
    1. Close all apps you don't want to open at startup.
    2. Open your user Library folder. It is normally invisible, so press the Option key while selecting the "Go" menu in the Finder then select "Library" to open it.
    3. Use the Get Info dialog "Locked" checkbox to lock this plist file:
    ~/Library/Preferences/ByHost/com.apple.loginwindow.*.plist
    where "~" is your home folder and "*" is a sequence of characters (12 in my case). No need to lock the corresponding lockfile.
    This plist is where the System stores "reopen windows" info, so the System can't change/delete it if it is locked. This won't change the "Reopen windows..." checkbox setting, but that setting will no longer have any effect.

  • How to create a one click apple script to run sudo rm -rf in terminal

    Hey Everyone
    I have sensitive information on my computer, quite paranoid and would love to have a one click script to run sudo rm -rf in terminal.
    I'm quite new to scripts and all that, can someone please explain how to do this as a noob?
    would love if I didn't need to enter the password to authorise the wipe.
    also is there anything more effective as sudo rm -rf?
    and can sudo rm -rf be undone? like can some traces be brought back from the drive if your like a super pro at hard drive data recovery?

    Welcome to Apple Support Communities
    That's not the way to delete everything from the hard drive, because your files can still be recoverable after running that command with special apps.
    Instead, if you want to make sure that your data cannot be recovered, start up in OS X Recovery (hold Command and R keys while your Mac is starting up), open Disk Utility and erase your OS X partition by choosing one of the security options you can use to erase your files. See > http://pondini.org/OSX/DU2.html
    A better option would be to put that sensitive data onto an encrypted external drive

  • I want app B to run when I open app A and I want app B to quit when I quit app A

    Hello
    I have an idle script that handles iTunes. I want the script to run when I run iTunes and quit when I quit iTunes.
    At the moment my workaround are two separate scripts, "zactivate" & "zquit"
      activate application "iTunes"
      activate application "albumArt"
    quit application "albumArt"
    quit application "iTunes"
    I use spotlight to launch these but I would like to open and quit iTunes "normally" and have the same effect as the above scripts.
    Please help me. I am a novice.

    Normally AppleScript will not run automatically when you open or quit any given app - they're completely unrelated events.
    However, if you already have an idle script, then you can amend your script to periodically poll to see if app1 is running and then launch/quit app2 based on the results. Something like:
    on idle
      tell application "System Events" to set processList to name of every application process
      if processList contains "iTunes" then
      -- iTunes is running, so make sure your secondary App is:
      if processList does not contain "albumArt" then
      launch application "AlbumArt"
      end if
      else
      -- iTunes is not running, so quit the secondary app
      if processList contains "albumArt" then
      tell application "AlbumArt" to quit
      end if
      end if
      return 30 -- check again in 30 seconds
    end idle
    The basic idea here is to periodically check to see if iTunes is running. Based on that, either launch or quit albumArt to keep them in sync.
    Lowering the return value from the above 30 seconds will have the check performed more frequently. You can run it as often as you like based on how long you're prepared to tolerate the apps being in a different run state.

  • When u activate, just put the # you want the phone to be on

    I, like alot of people used a family members upgrade to order the Iphone for me and was wondering how to activate it on my number.
    All u have to do is activate it throught Itunes first. Than you dial *228 and when it asks u what is the 10 digit number you want to activate, make sure to put your number and not the # u ordered it on. Than wait about 5 to 10 minutes after u are done and u are good to go.
    Loving the phone so far, except my youtube videos are not to clear. Anyone have any idaea why, or is that just the way it is?

    Everyone else has said that it does the whole activation on iTunes, so how do you keep it from activating on the line that you bought it on? I haven't received my iPhone yet, but I'm going to swap it from another line and would like to do so without interrupting the other line's service.
    Has anyone else done it this way?

  • Using a Counter as a start trigger to one or more tasks

    I am using the NI USB-6251. I want to configure a counter (e.g. Dev1/ctr0) at a user-specified frequency and the rising edge on this counter should act as a start trigger for an analog input task and a digital output task. 
    I've tried to do this by creating a task for the counter:
    integStartTriggerTask.COChannels.CreatePulseChanne​lFrequency(
    "Dev1/ctr0",
    "Integration Start Trigger",
    COPulseFrequencyUnits.Hertz,
    COPulseIdleState.Low,
    0,
    integFreqHz,
    0.5);
    and then connecting this to the StartTrigger for the analog input task:
    analogReadTask.Triggers.StartTrigger.ConfigureDigi​talEdgeTrigger("Dev1/ctr0", DigitalEdgeStartTriggerEdge.Rising);
    However running this gives the error: 
    Source terminal to be routed could not be found on the device.
    Make sure the terminal name is valid for the specified device. Refer to Measurement & Automation Explorer for valid terminal names.
    Property: NationalInstruments.DAQmx.DigitalEdgeStartTrigger.​Source
    Property: NationalInstruments.DAQmx.DigitalEdgeStartTrigger.​Edge
    Source Device: Dev1
    Source Terminal: Dev1/ctr0
    Task Name: analogReadTask
    I have also tried "Dev1/ctr0/StartTrigger" instead of "Dev1/ctr0". What am I doing incorrectly? Thanks.

    Hi zkhan.cimtec,
    To use a digital trigger for your start task you need to use a PFI line to read a signal that is coming in. You are setting up a task that outputs a start trigger on your counter line, but you can't read off that same line to start the task since that line is already configured for output. An example of how to setup a start trigger coming into a PFI line can be found in the examples here:
    <National Instruments Public>\NI-DAQ\Examples\DAQmx ANSI C\Analog In\Measure Voltage\Cont Acq-Ext Clk-Dig Start
    Hope this helps,
    Kevin

Maybe you are looking for