One or more u201C/VIRSA/Z_VFAT_FIREFIGHTERu201D roles?

Hello,
in the SPM Module of SAP GRC AC 5.3 I have read that I have to assign to each FF ID the u201C/VIRSA/Z_VFAT_FIREFIGHTERu201D role.
What does this role???
I thought that the FF ID user had to have the necesary roles to get into the Tcodes that the normal User ID could not get into.
I have seen the role and I don't see any additional objects. Do I have to create more roles like u201C/VIRSA/Z_VFAT_FIREFIGHTERu201D with each necesary Tcode?
Best Regards.
Pablo Mortera.

Hi,
The Fire Fighter should have /VIRSA/Z_VFAT_FIREFIGHTER in order to enter into dash board in SPM application; there are three roles that come with SPM application in user based SPM application,
/VIRSA/Z_VFAT_ADMINISTRATOR                 Firefighter Administrator Role
/VIRSA/Z_VFAT_FIREFIGHTER                 Firefighter Firefighter's role
/VIRSA/Z_VFAT_ID_OWNER                 Firefighter FirefighID owner's role
The expected transactions can be assigned to FFID and role /VIRSA/Z_VFAT_FIREFIGHTER can be assigned to Fire Fighter to execute the expected transactions that are assigned to FFID, the SPM application can log the activities against FFID,
Hope it helps...

Similar Messages

Custom Report: the list of IT ROLES of one or more users

Hi all,
I want to do a custom report that gives me the list of IT ROLES of one or more users. Anyone could give me some guidelines?
Thanks

according to the docs... if I interpret them right
getRoles returns roles assigned to the context given, this is wise since it is usualy used to check if the current user invoking the call has the rights in a form, workflow or similiar...
Adding the "accountId" string as a second argument would invoke this form of the getRoles
getRoles
public static java.util.List getRoles(LighthouseContext s, java.lang.String current) throws WavesetException
This variant allows a specific name to be included in the returned list. Used to ensure that the current value of a role may continue to be assigned even though the current admin may not have access to that role.
I believe you should get the users view and get your info from there...
if you try using the debug page and getObject User and the accountId, you will see the user in its full glory...
there you can see what you might want to do I hope

"one or more ADRMS role services could not be configured: AD RMS setup failed because of invalid configuraion setting"

HI,
when I configure AD RMS configuration it gives me error that "one or more ADRMS role services could not be configured: AD RMS setup failed because of invalid configuraion setting". The user which I try to install is an administrator of DC and
also the service account is a member of enterprise domain group. When I tried this on test environment it works perfectly but on production environment it didn't. pls help me with this....
Thanks......
I am using windows 2012 standard Server..

HI Eddie,
Thanks for reply.. Pls find the debug log below... It says " Message: The 'http://tempuri.org/RMProvisionSettingsSchema.xsd:Domain' element is invalid - The value 'D' is invalid according to its datatype 'http://tempuri.org/RMProvisionSettingsSchema.xsd:WindowsDomainName'
- The actual length is less than the MinLength value. "
00000706 56.78187180
[11964] CallStack:Microsoft.RightsManagementServices.Configuration.HelperMethods.IsValidConfigSetting
00000707 56.78187180
[11964] System.Xml.Schema.XmlSchemaValidationException
00000708 56.78187180
[11964] Message: The 'http://tempuri.org/RMProvisionSettingsSchema.xsd:Domain' element is invalid - The value 'D' is invalid according to its datatype 'http://tempuri.org/RMProvisionSettingsSchema.xsd:WindowsDomainName' -
The actual length is less than the MinLength value.
00000709 56.78187180
[11964] StackTrace: at Microsoft.RightsManagementServices.Configuration.HelperMethods.ProvisionSchemaValidationEventHandler(Object sender, ValidationEventArgs e)
00000710 56.78187180
[11964] at System.Xml.Schema.XmlSchemaValidator.CheckElementValue(String stringValue)
00000711 56.78187180
[11964] at System.Xml.Schema.XmlSchemaValidator.ValidateAtomicValue(String stringValue, XmlSchemaSimpleType& memberType)
00000712 56.78187180
[11964] at System.Xml.Schema.XmlSchemaValidator.InternalValidateEndElement(XmlSchemaInfo schemaInfo, Object typedValue)
00000713 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000714 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000715 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000716 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000717 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000718 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000719 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000720 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000721 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateElement()
00000722 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000723 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.ValidateNode(XmlNode node)
00000724 56.78187180
[11964] at System.Xml.DocumentSchemaValidator.Validate(XmlNode nodeToValidate)
00000725 56.78187180
[11964] at System.Xml.XmlDocument.Validate(ValidationEventHandler validationEventHandler, XmlNode nodeToValidate)
00000726 56.78187180
[11964] at Microsoft.RightsManagementServices.Configuration.HelperMethods.IsValidConfigSetting(ConfigOperationType configOperation)
00000727 56.78187180
[11964]
00000728 56.78199768
[11964] -Microsoft.RightsManagementServices.Configuration.Commands.InstallADRMS.ProcessRecord
00000729 56.84855270
[11964] +Microsoft.RightsManagementServices.Configuration.DeploymentPSProvider.RemoveDrive
00000730 56.84864807
[11964] -Microsoft.RightsManagementServices.Configuration.DeploymentPSProvider.RemoveDrive
00000731 56.86203766
[23784] +[Tier2Diagnostic]
00000732 56.86203766
[23784] CallStack:System.Windows.Threading.ExceptionWrapper.InternalRealCall
00000733 56.86203766
[23784] Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
00000734 56.86203766
[23784] Message: AD RMS setup failed because of invalid configuration settings.
00000735 56.86203766
[23784] StackTrace: at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
00000736 56.86203766
[23784] at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
warningHandler, EventHandler`1 errorHandler)
00000737 56.86203766
[23784] at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
00000738 56.86203766
[23784] at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
00000739 56.86203766
[23784] at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
00000740 56.86203766
[23784] + System.Management.Automation.RemoteException
00000741 56.86203766
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000742 56.86203766
[23784] + StackTrace:
00000743 56.86203766
[23784]
00000744 56.86225891
[23784] +[Tier2Diagnostic] One or more AD RMS role services could not be configured:
00000745 56.86225891
[23784] CallStack:Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker`1+<>c__DisplayClass1.<Run>b__0
00000746 56.86225891
[23784] Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
00000747 56.86225891
[23784] Message: AD RMS setup failed because of invalid configuration settings.
00000748 56.86225891
[23784] StackTrace: at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
00000749 56.86225891
[23784] at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
warningHandler, EventHandler`1 errorHandler)
00000750 56.86225891
[23784] at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
00000751 56.86225891
[23784] at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
00000752 56.86225891
[23784] at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
00000753 56.86225891
[23784] + System.Management.Automation.RemoteException
00000754 56.86225891
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000755 56.86225891
[23784] + StackTrace:
00000756 56.86225891
[23784]
00000757 56.86357880
[23784] PageLeave: Progress
00000758 56.86389160
[23784] ErrorNotification: <null>
00000759 56.86653519
[23784] PageEnter: Results
00000760 56.89128876
[23784] +[Tier2Diagnostic] One or more AD RMS role services could not be configured:
00000761 56.89128876
[23784] CallStack:Microsoft.RightsManagementServices.Deployment.ViewModel.ResultsPageViewModel.SetUpResultDetails
00000762 56.89128876
[23784] System.Management.Automation.ApplicationFailedException
00000763 56.89128876
[23784] Message: One or more AD RMS role services could not be configured:
00000764 56.89128876
[23784] StackTrace:
00000765 56.89128876
[23784] + Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
00000766 56.89128876
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000767 56.89128876
[23784] + StackTrace: at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
00000768 56.89128876
[23784] at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
warningHandler, EventHandler`1 errorHandler)
00000769 56.89128876
[23784] at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
00000770 56.89128876
[23784] at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
00000771 56.89128876
[23784] at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
00000772 56.89128876
[23784] + System.Management.Automation.RemoteException
00000773 56.89128876
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000774 56.89128876
[23784] + StackTrace:
00000775 56.89128876
[23784]
00000776 56.89152908
[23784] +[Tier2Diagnostic] OnOperationError
00000777 56.89152908
[23784] CallStack:Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker`1+<>c__DisplayClass1.<Run>b__0
00000778 56.89152908
[23784] System.Management.Automation.ApplicationFailedException
00000779 56.89152908
[23784] Message: One or more AD RMS role services could not be configured:
00000780 56.89152908
[23784] StackTrace:
00000781 56.89152908
[23784] + Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.RemotingException
00000782 56.89152908
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000783 56.89152908
[23784] + StackTrace: at Microsoft.ADRoles.ServerManager.Common.PowerShellRemoting.WorkflowExecutor.ExecuteCommand(Command workflowCommand, EventHandler`1 outputEventsHandler, EventHandler`1 progressEventHandler,
EventHandler`1 finishedEventHandler, EventHandler`1 warningEventHandler, EventHandler`1 errorEventHandler)
00000784 56.89152908
[23784] at Microsoft.RightsManagementServices.Deployment.M3PPowerShellEngine.ExecuteCommand(CmdletProperties propertyBag, EventHandler`1 outputHandler, EventHandler`1 progressStatusHandler, EventHandler`1 progressPercentageHandler, EventHandler`1
warningHandler, EventHandler`1 errorHandler)
00000785 56.89152908
[23784] at Microsoft.RightsManagementServices.Deployment.AbstractPowerShellProvider.<>c__DisplayClass3`1.<ExecuteAsynchronously>b__0(Object sender, DoWorkEventArgs eventArgs)
00000786 56.89152908
[23784] at Microsoft.RightsManagementServices.Configuration.AbortableBackgroundWorker.OnDoWork(DoWorkEventArgs e)
00000787 56.89152908
[23784] at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
00000788 56.89152908
[23784] + System.Management.Automation.RemoteException
00000789 56.89152908
[23784] + Message: AD RMS setup failed because of invalid configuration settings.
00000790 56.89152908
[23784] + StackTrace:
00000791 56.89152908
[23784]

Error: ORA-16778: redo transport error for one or more databases

Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>

This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry

When connecting to a server farm in sharepoint foundation 2013 cannot create new farm error: One or more types failed to load

When trying to create a new server farm in the sharepoint foundation 2013 we get a following error :
The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered.
PS C:\Users\Administrator> New-SPConfigurationDatabase
cmdlet New-SPConfigurationDatabase at command pipeline position 1
Supply values for the following parameters:
DatabaseName: SharePoint_Config
DatabaseServer: PC78\SQLEXPRESS,25111
FarmCredentials
Passphrase: *********
New-SPConfigurationDatabase : One or more types failed to load. Please refer
to the upgrade log for more details.
At line:1 char:1
+ New-SPConfigurationDatabase
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...urationDatabase:
SPCmdletNewSPConfigurationDatabase) [New-SPConfigurationDatabase], SPUpgra
deException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPCon
figurationDatabase
And the error log is shown below :
Microsoft.SharePoint.Upgrade.SPUpgradeException: One or more types failed to load.
Please refer to the upgrade log for more details.
at Microsoft.SharePoint.Upgrade.SPActionSequence.LoadUpgradeActions()
at Microsoft.SharePoint.Upgrade.SPActionSequence.get_ActionsInternal()
at Microsoft.SharePoint.Upgrade.SPUtility.GetLatestTargetSchemaVersionByMajorVersion(Type typeActionSequence, Int32 majorVer)
at Microsoft.SharePoint.Upgrade.SPUtility.get_CurrentSPSiteWssTargetSchemaVersion()
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, Strin... b712a522-fa85-49eb-b59c-dedf55295504
...g secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName, Boolean overrideCompatibilityRestriction)
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, Boolean useHostHeaderAsSiteName)
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, ... b712a522-fa85-49eb-b59c-dedf55295504
...String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuil... b712a522-fa85-49eb-b59c-dedf55295504
...der configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase.InternalProcessRecord()
at Microsoft.SharePoint.PowerShell.SPCmdlet.ProcessRecord() b712a522-fa85-49eb-b59c-dedf55295504
Error Category: InvalidData Target Object Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase Details NULL RecommendedAction NULL b712a522-fa85-49eb-b59c-dedf55295504
Leaving ProcessRecord Method of New-SPConfigurationDatabase. e9ae5ba6-c499-0000-d35c-aee999c4cf01
we are using server 2012 R2 and we don't have office 2010 installed

Yes,SQL server is on the same server as SharePoint
SQL has both the permissions Securityadmin
and DBcreator roles on SQL Server.
When we run those sharepoint management shell commands the database will be created with the error
msg (shown in attachment)

Exchange 2013: This mailbox database is associated with one or more active mailboximport / Cannot uninstall exchange

We have a corrupted installation of Exchange 2013 due to installating CU6
New Exchange server is already installed and mailboxes are migrated over, I am now in the process to uninstall the old exchange 2013 so we can decomission it but I get this error when I try to run uninstall
"This mailbox database is associated with one or more active mailbox import,To get a list of all Mailboximport request associated with this database, run Get MailboxImportRequest | ?{ $_.RequestQueue -eq "<Database ID>"}....
But when i run this command I get an error of" The Get-MailboxImportRequest is not recognized as a cmdlet...
Any advise is appreciated
Thanks.

Hi ,
From the error message i came to know few things i have mentioned mentioned below .
If you want to remove the problematic exchange server , you need to remove the existing mailbox import requests.
For that you should need to have the required permission for the user account from which you are trying to execute the command
Just check your user account is having the Mailbox Import Export role permissions .
If you have the required permissions then go ahead and execute the commands
Get-MailboxImportRequest | ft -au ( this is to see how many no of the mailbox import request are available
Remove-MailboxImportRequest
( this command is to remove the entire mailbox import move request)
Once you have done with that , then you start proceeding uninstalling the exchange server .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Item cost not found for one or more items - Inventory Posting

Good Day Mentors,
My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
The specific Message ID from SAP's System Message Log is 10001287.
I found a similar post which addresses this error here.
But unfortunately it did not help me solve my user's problem.
I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
I am not a business consultant neither am I literate in accounting, so thanks for the patience.
SAP Version: 9.0 PL5
Valuation Method: Moving Average
Thanks in advance!
Sean

Hi Augusto and Raviraj,
I've already verified in our production database the points you made:
- Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
YES
- Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
YES
* I apologize for not have been able to give this information upfront.
Anyway, the database only has one warehouse at the moment.
I've checked the items, like the item in the screen shot above, and it does have an item cost.
Below is the screenshot of the sample item from my original post,
Thanks in advance!
Sean

Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi there,
I use visual studio community 2013 to develop app for office. When I create app project using template and directly run it, it shows me this error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
Can anyone help? Thanks in advance.

Hi holm0104,
Did you add custom code into the project? Can you reproduce the issue in a new project without custom code?
If not, did you have issue when you create a normal web application?
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information" while attempting to open UNIX/Linux monitor

We have upgraded our System Center to 2012 R2, and we cannot open any of the UNIX/Linux LogFile monitor property or the UNIX/Linux process monitor property for those monitors created prior to the upgrade. Error we get is below. Any assitance
appreciated.
Date: 9/30/2014 10:01:46 PM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.TypeContainer.get_ContainedType()
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.AddTemplatePages(LaunchTemplateUIData launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Initialize(Object launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.RunPrivate(Object[] userData)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Run(Object[] userData)

It's possible the upgrade did not update everything properly as it looks like a dll mismatch or a missing file. I'd open a support ticket with MS and have a support engineer look at the upgrade logs. What version of SCOM did you upgrade from?
Regards,
-Steve

When one or more family members who have been sharing one iTunes account wants to create their own iTunes account can they each upload the music/apps from the shared iTunes on their devices to the new iTunes account?

When one or more family members who have been sharing one iTunes account wants to create their own iTunes account can they each upload the music/apps from the shared iTunes on their devices to the new iTunes account?

Yes. I would clarify your statement about the "shared" iTunes Library though. If you want each iOS device to have its own music library, you should create separate user accounts for them. Read:
iTunes: How to share music between different accounts on a single computer
How to use multiple iPods, iPads, or iPhones with one computer

How to delete the double records connected to one or more than one tables in SQL 2008?

Hi
Can anyone please help me with the SQL query. I Im having a table called People with columns names: personno., lastname, firstname and so on. The personno. is having duplicate records,so all the duplicate records i have written with "double" in
the beginning of the numbers. I tried deleting these double records but they are linked to one or more than one tables. I have to find out, all the tables blocking the deleting of double person. And then create select statements which creates update statements
in order to replace the current id of double person with substitute id. (The personno. is in the form of id's in the database)
Thanks

You should not append "double" in the personno. When we append it will not be able to join or relate to other table. Keep the id as it is and use another field(STATUS) to mark as duplicate. Also we will require another field(PRIMARYID) against
those duplicate rows i.e the main or the primary personno.
SELECT * FROM OtherTable a INNER JOIN
(SELECT personno, status, primaryid FROM PEOPLE WHERE status = 'Duplicate') b
ON a.personno = b.personno
UPDATE OtherTable SET personno = b.primaryid
FROM OtherTable a INNER JOIN
(SELECT personno, status, primaryid FROM PEOPLE WHERE status = 'Duplicate') b
ON a.personno = b.personno
NOTE: Please take backup before applying the query. This is not tested.
Regards, RSingh

How can I create a new Care Plan with one or more care tasks

Hello,
I'm working on a Dutch website in the HealthVault Environment. I got difficulties in creating and updating a careplan with care tasks. Most likely it's due to lack of knowledge...
Following code works fine:
CarePlan plan = new CarePlan();
plan.Name = "test";
this.PersonInfo.SelectedRecord.NewItem(plan);
It creates a plan called [test]. But I don't know how to create a plan with one or more tasks in it: the tasks property is read only.
https://msdn.microsoft.com/en-us/library/microsoft.health.itemtypes.careplan.tasks.aspx
Half a year ago I was able to add an example of a careplan, which was a feature of the dev tools, but for some reason that's not possible anymore.
https://developer.healthvault.com/DataTypes/Overview?TypeId=415c95e0-0533-4d9c-ac73-91dc5031186c
So my question is, how can I add a new care plan with a task like the example from the HealthVault dev tools:
<tasks>
<task>
<name>
<text>Run 100 miles</text>
</name>
<description>Run 100 miles in 6 months</description>
<start-date>
<structured>
<date>
<y>2013</y>
<m>12</m>
<d>1</d>
</date>
</structured>
</start-date>
<end-date>
<structured>
<date>
<y>2014</y>
<m>6</m>
<d>1</d>
</date>
</structured>
</end-date>
<target-completion-date>
<structured>
<date>
<y>2014</y>
<m>12</m>
<d>31</d>
</date>
</structured>
</target-completion-date>
<sequence-number>279128532</sequence-number>
<recurrence>
<interval>
<text>Once</text>
</interval>
<times-in-interval>10</times-in-interval>
</recurrence>
<reference-id>p01vil21ckg7k2346y1g60337mmi20sg564l321l8pmpqev39n302572sewu76lh9019s3993e02924</reference-id>
</task>
</tasks>
Any help is welcome
Wilfred

Hi Wilfred,
Have you tried this?
CarePlan plan = new CarePlan();
plan.Name = "test";
plan.Tasks.Add(someTask)
If you have a task list already, you would need to enumerate through it and add one by one...
foreach (var task in existingList)
plan.Tasks.Add(task)

I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."

I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I don't have anything else plugged into my MBP, so I am confused as to what's going on. This problem has never happened before. MBP is less than a year old - about 9 months old. HELP

Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

I cannot erase alias JPeg images on a memory card so that it will not accept any more which I try to load onto it, yet there are no actual images available if I click on any of them. The error message states that one or more cannot

Cannot delete aliases for JPeg images on a lumix camera memory card even selecting individual images anjd trying to move to trash -error35 one or more items cannot be found. No image available on clicking or if card put back into camera-"no images to disply" Yet if try to add more images, message that card is full! Any suggestions?

Deleting from iPhoto or image capture after import should be fine and shouldn't cause any issues. Deleting from the folder view of finder, can cause issues as the camera can the image is still there. You can try emptying the trash on your mac if you deleted them via the finder, as although you've deleted it, it's only marked as trashed and not actually deleted until you empty the trash - ie it won't relieve the space taken by the files.
If your still having issues after you try this, you may be best formating the memory card. This will wipe all data on it though, so make sure you do copy anything off that yo u want to keep! Format from the camera, so that choosing the format>erase all option from the menu of most cameras.

The operation can't be completed because one or more required items can't be found. (Error code -43)

When I attempt to add files to...or copy to the desktop of my mac, my icloud (idisk ..the blue icon on my desktop) is giving this error:
The operation can’t be completed because one or more required items can’t be found.
(Error code -43)
I've been searching for info on that error code, but I'm not find anything on (many different error codes, but not -43).

I get an error -36.
I did the dot_clean in the terminal.
Did not fix it.

One or more u201C/VIRSA/Z_VFAT_FIREFIGHTERu201D roles?

Similar Messages

Maybe you are looking for