One original Intro cartridge no longer recognized by HP Officejet 6500a Plus printer

The original "Intro" Magenta cartridge in my HP 6500a Plus is no longer recognized by the printer.
The other "Intro" color cartridges (cyan and yellow) have a little ink left, and are recognized, along with a non-Intro HP black cartridge.
I didn't use this printer a lot. What would cause just one cartridge to no longer be recognized by the printer?
I can't use this printer at all now because of this. Not even for black-only printing... Not even for scanning!
Edit:
More info: The Magenta cartridge has an expiry of 2013/08, and the other 2 color cartridges have an expiry of 2013/09.
Hmm.. are these cartridges designed to self-destruct about 6 months after expiry, even if they have some useable ink left in them?
In a month or so, will the other 2 quit being recognized as well?
I get:
Ink System has failed (0xc19a0020)
Ink System has failed (0xc19a0022)
See attached pics for cartridge specific messages:
I've done Solution one: Reset the printer.
Done Solution two: Remove, clean, and reinstall the printhead.
Done Solution three: Reset the product (looks like the first solution).
I'm going to but a new Magenta cartridge and see if the problem goes away..

I just discovered the Embedded Web Server on my E710n-z printer. Very cool!
But it shows conflicting information from what the LCD panel shows:
(it shows the printer head as damaged)
And here, it recognizes the Magenta cartridge as empty:
I only printed 132 pages in the lifetime of this printer and the head is gone?

Similar Messages

  • Photoshop Elements 12 no longer see's my scanner.  So I cannot scan my pictures, help.  Windows 8.1 with HP Officejet 6500A Plus printer.  Scanner works with other programs in my PC.  Problem is PS12

    So I cannot scan my pictures, help.  Windows 8.1 with HP Officejet 6500A Plus printer.  Scanner works with other programs in my PC.  Problem is PS12

    I bought the Officejet 6500A Plus about one month and have experienced the very same problem. I tried to remedy this problem following suggestions in a number of different posts (static IP, router, firewalls etc), all to no avail. Last week I called support. The support I received by the tech over several hours and different days for a week was very good. However none of his suggestions corrected the connection issue. After today's recommended fix failed, he advised HP is aware of this issue with the 6500 and other affected printers. He claimed HP was working on a firmware upgrade. He did not know when the update would be provided. The tech also claimed HP acknowledged this problem in a written announcement. He agreed to email the announcement to me. I haven't received it. This has been the only problem I've had with the 6500

  • IS HP OFFICEJET 6500A PLUS E-ALL-IN-ONE CN557A FULLY COMPATIBLE WITH MAC OS X 10.7.5

    IS HP OFFICEJET 6500A PLUS E-ALL-IN-ONE CN557A FULLY COMPATIBLE WITH MAC OS X 10.7.5?

    Anthoulla wrote:
    ... Do u have any suggestions....?
    Yes. These days I prefer Brother printers. They appear to have engineered their printers with AirPrint as well as OS X compatibility from the start, unlike certain others who appear to have included it as an afterthought.
    Brother's models are inexpensive, their ink is also inexpensive and lasts a long time, and their photo quality is at least as good as HP's. They have a two year warranty and lifetime free technical support with people who understand Apple.
    Read the reviews (Amazon for instance, but be sure to read user reviews on the various manufacturer's websites as well) and decide for yourself.
    If you require AirPrint compatibility, or if there is any possibility you may need it in the future, limit your search to printers that specifically indicate AirPrint compatibility.
    Brother™ Monochrome Laser Printer and All-in-One models now support AirPrint.
    Brother™ Color Inkjet All-in-One units now support AirPrint.
    I have no affiliation with Brother but theirs was the first inkjet printer or "all-in-one" I have ever owned that simply works as well as the Macs I am accustomed to using. I positively detested every inkjet printer I ever had until I bought the Brother.

  • Wireless configuration for HP OfficeJet 6500A plus All-In-One printer on Ubuntu 10.04

    I have bought a HP OfficeJet 6500A plus All-In-One printer CN557A, which I want to use with ubuntu 10.04 64-bit as a wireless network printer.
    Before i bought i checked compatibility on www.hplipopensource.org and www.openprinting.org, and all was in order.
    The machine is autodetected and fully functional when connected with a usb cable, but i have not managed to get it to work as a wireless printer.
    This is what I did:
    I configured the printer on the wireless network (through the printer interface), and it connects. It prints out a "Wireless Network Test Report", and everything works. I can ping to its local ip adress, and access it through the browser. HP eprint also works.
    I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognise the device.
    I ran 'hp-check', which gave no errors or warnings:
    tjoff@mek-403-jakbo-01:~$ hp-check
    HP Linux Imaging and Printing System (ver. 3.11.10)
    Dependency/Version Check Utility ver. 14.3
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    Note: hp-check can be run in three modes:
    1. Compile-time check mode (-c or --compile): Use this mode before compiling the
    HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
    are installed to successfully compile HPLIP.
    2. Run-time check mode (-r or --run): Use this mode to determine if a distro
    supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
    has the proper dependencies installed to successfully run.
    3. Both compile- and run-time check mode (-b or --both) (Default): This mode
    will check both of the above cases (both compile- and run-time dependencies).
    Saving output in log file: hp-check.log
    Initializing. Please wait...
    | SYSTEM INFO |
    Basic system information:
    Linux mek-403-jakbo-01 2.6.32-35-generic #78-Ubuntu SMP Tue Oct 11 16:11:24 UTC 2011 x86_64 GNU/Linux
    Distribution:
    ubuntu 10.04
    Checking Python version...
    OK, version 2.6.5 installed
    Checking PyQt 4.x version...
    OK, version 4.7.2 installed.
    Checking for CUPS...
    Status: scheduler is running
    Version: 1.4.3
    error_log is set to level: warn
    Checking for dbus/python-dbus...
    dbus daemon is running.
    python-dbus version: 0.83.0
    | COMPILE AND RUNTIME DEPENDENCIES |
    note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
    note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
    Checking for dependency: CUPS - Common Unix Printing System...
    OK, found.
    Checking for dependency: CUPS devel- Common Unix Printing System development files...
    OK, found.
    Checking for dependency: CUPS image - CUPS image development files...
    OK, found.
    Checking for dependency: DBus - Message bus system...
    OK, found.
    Checking for dependency: gcc - GNU Project C and C++ Compiler...
    OK, found.
    Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
    OK, found.
    Checking for dependency: libcrypto - OpenSSL cryptographic library...
    OK, found.
    Checking for dependency: libjpeg - JPEG library...
    OK, found.
    Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
    OK, found.
    Checking for dependency: libpthread - POSIX threads library...
    OK, found.
    Checking for dependency: libtool - Library building support services...
    OK, found.
    Checking for dependency: libusb - USB library...
    OK, found.
    Checking for dependency: make - GNU make utility to maintain groups of programs...
    OK, found.
    Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
    OK, found.
    Checking for dependency: PolicyKit - Administrative policy framework...
    OK, found.
    Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
    OK, found.
    Checking for dependency: Python DBus - Python bindings for DBus...
    OK, found.
    Checking for dependency: Python devel - Python development files...
    OK, found.
    Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
    OK, found.
    Checking for dependency: Python XML libraries...
    OK, found.
    Checking for dependency: Python 2.3 or greater - Required for fax functionality...
    OK, found.
    Checking for dependency: Python 2.2 or greater - Python programming language...
    OK, found.
    Checking for dependency: Reportlab - PDF library for Python...
    OK, found.
    Checking for dependency: SANE - Scanning library...
    OK, found.
    Checking for dependency: SANE - Scanning library development files...
    OK, found.
    Checking for dependency: scanimage - Shell scanning program...
    OK, found.
    Checking for dependency: xsane - Graphical scanner frontend for SANE...
    OK, found.
    | HPLIP INSTALLATION |
    Currently installed HPLIP version...
    HPLIP 3.11.10 currently installed in '/usr/share/hplip'.
    Current contents of '/etc/hp/hplip.conf' file:
    # hplip.conf. Generated from hplip.conf.in by configure.
    [hplip]
    version=3.11.10
    [dirs]
    home=/usr/share/hplip
    run=/var/run
    ppd=/usr/share/ppd/HP
    ppdbase=/usr/share/ppd
    doc=/usr/share/doc/hplip-3.11.10
    icon=/usr/share/applications
    cupsbackend=/usr/lib/cups/backend
    cupsfilter=/usr/lib/cups/filter
    drv=/usr/share/cups/drv/hp
    # Following values are determined at configure time and cannot be changed.
    [configure]
    network-build=yes
    pp-build=no
    gui-build=yes
    scanner-build=yes
    fax-build=yes
    dbus-build=yes
    cups11-build=no
    doc-build=yes
    shadow-build=no
    hpijs-install=no
    foomatic-drv-install=no
    foomatic-ppd-install=no
    foomatic-rip-hplip-install=no
    hpcups-install=yes
    cups-drv-install=yes
    cups-ppd-install=no
    internal-tag=3.11.10
    restricted-build=no
    ui-toolkit=qt4
    qt3=no
    qt4=yes
    policy-kit=no
    hpijs-only-build=no
    lite-build=no
    udev-acl-rules=yes
    hpcups-only-build=no
    hpijs-only-build=no
    Current contents of '/var/lib/hp/hplip.state' file:
    # hplip.state - HPLIP runtime persistent variables.
    [plugin]
    installed=0
    eula=0
    Current contents of '~/.hplip/hplip.conf' file:
    [last_used]
    printer_name =
    working_dir = .
    device_uri = "hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW"
    [commands]
    scan = /usr/bin/xsane -V %SANE_URI%
    [installation]
    version = 3.11.10
    date_time = 2011-11-16 14:30:35
    [settings]
    systray_messages = 0
    systray_visible = 0
    [fax]
    email_address =
    voice_phone =
    [refresh]
    rate = 30
    enable = false
    type = 1
    [polling]
    enable = false
    device_list =
    interval = 5
    | DISCOVERED USB DEVICES |
    Device URI Model
    hp:/usb/Officejet_6500_E710n-z?s HP Officejet 6500 E710n-z
    erial=CN16F2402Q05JW
    | INSTALLED CUPS PRINTER QUEUES |
    B-403-271-A4-COLOR2
    Type: Unknown
    Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color
    B403-271-A4-BW
    Type: Unknown
    Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW
    HP-Officejet-6500-E710n-z-FAX
    Type: Printer
    Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
    PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
    PPD Description: HP Officejet 6500 e710n-z, hpcups 3.11.10
    Printer status: printer HP-Officejet-6500-E710n-z-FAX is idle. enabled since 2011-11-16T01:00:45 CET
    Communication status: Good
    | SANE CONFIGURATION |
    'hpaio' in '/etc/sane.d/dll.conf'...
    OK, found. SANE backend 'hpaio' is properly set up.
    Checking output of 'scanimage -L'...
    device `hpaio:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
    | PYTHON EXTENSIONS |
    Checking 'cupsext' CUPS extension...
    OK, found.
    Checking 'pcardext' Photocard extension...
    OK, found.
    Checking 'hpmudext' I/O extension...
    OK, found.
    Checking 'scanext' SANE scanning extension...
    OK, found.
    | USB I/O SETUP |
    Checking for permissions of USB attached printers...
    HP Device 0x5412 at 002:005:
    Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
    Device node: /dev/bus/usb/002/005
    Mode: 0664
    | USER GROUPS |
    lp adm dialout cdrom plugdev lpadmin admin sambashare vboxusers
    | SUMMARY |
    No errors or warnings.
    Done.
    I then ran 'sudo hp-setup', chose the device (which was detected), chose my wireless network, entered the wireless security key. On the configuration results dialog I get two messages:
    "Your printer has been succesfully configured on the wireless network. You may now unplug the USB cable"
    and
    "The Ethernet cable is plugged in which will prevent you from connecting to a wireless network. To connect wirelessly, remove the cable and try again. (VSA000)"
    There is no ethernet cable plugged in, so i can't remove it. I unplug the USB cable and click 'finish'. This makes the 'hp-setup'-dialog start over again, and the printer has not been installed.
    In the terminal i have the following:
    tjoff@mek-403-jakbo-01:~$ sudo hp-setup
    [sudo] password for tjoff:
    HP Linux Imaging and Printing System (ver. 3.11.10)
    Printer/Fax Setup Utility ver. 9.0
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    Searching on USB bus...
    GET /IoMgmt/Adapters HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    error: Missing response key: 'iorotocols-iorotocol-dd:dnsserveripaddress-0'
    GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/Adapters/Wifi0/WifiNetworks/SSID=mVnmXfsu HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/IoConfig.xml HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    I then tried to reconnect the printer usb cable and run 'hp-toolbox' and click "Wireless/wifi setup using USB". Now i get the error:
    tjoff@mek-403-jakbo-01:~$ hp-toolbox
    HP Linux Imaging and Printing System (ver. 3.11.10)
    HP Device Manager ver. 15.0
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    HP Linux Imaging and Printing System (ver. 3.11.10)
    Wifi Configuration Utility ver. 1.1
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    error: Channel write error
    error: An I/O error occurred. Please check the USB connection to your printer and try again. (Device I/O error)
    Done.
    I do not how get past this stage, and any help is welcome. 
    This question was solved.
    View Solution.

    A friendly soul on ubuntuforums pointed out to me, that the wireless configuration is only necessary when the printer is NOT connected to a (W)LAN. So all I really had to do was to configure the printer in the CUPS administation page, and it worked. Problem solved. Silly me.

  • Problems printing to HP officejet 6500A plus e-All-in-one printer e710n

    Hi,
    I am struggling to print to my " HP officejet 6500A plus e-All-in-one printer e710n". According to the setup network test (Wireless network test report), everything is successful (status "PASS" for all fields).  I also checked that the IP configured is the same as the IP displayed on the printer when i push the wireless button (updated via "Update IP address").
    I have a laptops as well as netbooks connected to the wireless network. All these devices could previously print, however now none of them can. When i run the diagnostics (both the standard trouble shooter, as well as the one from microsoft when clicking on the fixit option), no problems are detected. When checking the device manager, i can see no conflicts.
    When i open the printer control panel and click on "Customize your printer" and then go to "Ports" and click on  the "configure port" option, i get an error "An error occurred during port configuration. Operation could not be completed (error 0x0000007b).".
    Please assist with any suggestions.

    I was able to resolve the problem.
    I reinstalled the printer on one of my other laptops (this might have cleared up an error on the printer). I think the true problem is related to the fact that we left the printer on, we've started switching it off when not in use. Even though it goes into sleep mode, it seems to cause problems over time if not switched off on the printer itself. 
    The basics i did was check the network connection, printed a status of the network connectivity (you can do that from your control panel on the printer). If the network looks good, then try leaving your printer off for an hour or so, if that doesn't work, try reinstalling the printer on your device and start switching it off after use. I know it sounds crazy, but that's what i've been doing and haven't had a problem since.
    It was a strange problem, in some cases i wasn't able to see the printer from devices that previously could, when the devices that could see the printer tried to print, it would print okay for a few pages and then start printing garbage, followed by failing completely and cancelling the print. When this happened there would be an error on the device saying it cannot connect to the printer, even though it could at the start of print.

  • HP update HP Officejet 6500A Plus e-All-in-One Printer-E710n multi fails @ 96%Z

    HP Officejet 6500A Plus e-All-in-One Printer - E710n
    Windows Vista
    HP is trying to update my HP Officejet 6500A Plus e-All-in-One Printer - E710n w/ "HPZSetup.exe & multi fails @ 96%
    Errors:
    HP-PhotoSmart All-In-One Series "Error" "wStub" "2229580"
         Same message appeared multiple times with new numbers: 459624; 525134; 328216
    I am on WIFI but system always shows me on USB.  I thought maybe that was the problem so I connected by USB. No Help.
    I assume this is an update??  HP is insistant and keeps sending me this update which alwaysends in FATAL ERROR at 96%
    Next steps??  Thanks JLM_JR
    This question was solved.
    View Solution.

    No Problem. Is everything working now or this tool only removed the HP software? If so, then try downloading the full feature software to see if this fails or not here. Please choose your correct operating system; Either 32 bit or 64 bit. I will be looking forward to hearing from you.
    I worked on behalf of HP.

  • HP OfficeJet 6500A Plus e All in One Printer E710n-z

    I have the HP OfficeJet 6500A Plus E710n-z series for All-In-One Printer.  I lost my driver software disk together with the PC computer that had the  software driver installed in it.
    I now have the Printer and my current PC ( which is using Wins 7 Home Premium 64-bit Operating System).
    I have found the download link for the driver software from HP website and from the internet.Each time I download the driver software, there was a "cancel" or "unable to proceed" message at the almost end of the download process. I was told to "retry".
    My humble request is to have the driver software files so that I can install the driver and operate the printer. My PC is functioning as it can detect correctly the Printer with its correct name and model.
    I donot know the problems. Is it a virus?
    Alternatively, I greatly appreciate if you could email to me the driver software files.( Please use Google Cloud if the files are too big). 
    Thank you for helping me.
    Best regards.
    Paulgo

    Since you have 10.10, you will first need to install this: HP Printer Drivers v3.0 for OS X. With that installed, follow the steps to add a printer here: Installing Your HP Printer Driver and Software for Mac OS X.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Officejet 6500A Plus e-All-in-One Printer - E710n wireless print and web app problem

    We have an HP Officejet 6500A Plus e-all-in-one Printer - E710n and run Windows 7 on our laptop.
    I have run the wirelss setup wizard and have successfully connected the printer to the router, and both the laptop and printer are on the same network and have identical SSID.
    However, we can not send any prints the printer wirelessly. We have to hook it up to the USB to do so. We are also unable to access our web apps; pressing the app button on the printer control panel brings up the following:
    "Connection error. The printer was unable to connect to the server. Check your internet connection and try again."
    I have run through the suggested solutions under "A Network Connected Printer Cannot Access Print Apps, Web Services, or ePrint" in the customer care help centre which didn't work, although when I tried to enter the IP address under IPv4 into the browser address bar it timed out. I tried the HP Print and Scan Doctor, but it returns a result that suggests everything is fine.
    I turned off the firewall and tried again with no luck.
    I really am at a loss now. Diagnostics say it should work, but it doesn't. Help!

    Disable Bitdefender altogeher and try again.
    Also, see this: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02251103
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Epson Photo RX600 no longer recognized by Image Capture but still prints

    Recently my Epson Photo RX600 disappeared from Image Capture (in between doing an overview and final scan) and I can no longer seem to find/assign it. I am still able to print to the device through my Mac and to scan/copy using the buttons on the device, but no luck on scanning through the Mac. Any advice?
    Thanks.

    My name is Syd and I work for Epson America, Inc.
    If nothing has been changed on the computer itself, you may want to re-install the ICA scanner driver and restart. If this does not work and the RX600 is connected directly to your Mac USB port, we would recommend contacting tech support to more quickly determine the issue as there are variables involved. The direct number is 562-276-4382.
    Here to help,
    Syd

  • Officejet 6500A Plus e-All-in-One Printer - E710n Sharing without a homegroup

    Hi,
    I have a HP netbook DV7 with Windows 7. A Dell 15R 5520 (the last of the netbooks) with Windows 7 and a HP 6500A all in one printer. I would like to use the printer on both computer wirelessly without creating a homegroup. Is this possible? If so I would appreciate any help on the setup.
    Thanks!

    Hi,
    As long as printer is connected to a router and has a valid IP address, computers connected to the router will be able to access the printer even if there 2 or more computers connected to the router.
    Please refer following link for more info.
    http://www.hp.com/global/us/en/wireless/printer-setup-help.html
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • HELP!!!! HP Officejet 6500A Plus e-All-in-One Printer - E710n - will not stay online

    I have 2 desk tops a net book and a lap top connected to it and all test printed fine and then after a period of time the printer goes off line and then it will not work.  I can restart the printer and it still will not work.  The router does not even "see it" although it can ping it...???  I have reinstalled software and restored factory settings... I tried saving the IP that did not help.  It is brand new and I checked and it has the most recent firmware updates.  I have run network test reports and all is fine.  I tried an HP print diagnostic and it can't see the printer.  I got it to work temporarily after completing a router reboot, but now that is not working either.  I just bought this today and I have spent the last 5 hours researching and troubleshooting.  I am not overly tech savvy and I have exhausted my knowledge base and the info suggested on blogs and fix it sites. 
    I was replacing my hp all in one wired printer that the print head just went out on after only a little over a year.  I don't know if I need to return this printer or if there is a magic fix??? Please help! 

    You can refer to the link below for the paper sizes and types supported by this printer here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02291053&tmp_task=prodinfoCategory&cc=sg&dlc=en...
    I work for HP.

  • Will my hp officejet 6500a plus (e-all-in-one printer - e710n) be able to handle 14pt C2S paper?

    I'm just wondering if my printer will be able to handle that thick of paper without ruining the quality of the print.  I've been trying to find the paper thickness limitations for this printer but I can't seem to find them anywhere.

    You can refer to the link below for the paper sizes and types supported by this printer here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02291053&tmp_task=prodinfoCategory&cc=sg&dlc=en...
    I work for HP.

  • HP Officejet 6500A Plus e-All-in-One Printer - E710n, Driver cannot download

    The driver stops downloading part way. Tried many browsers

    joshuawkj,
    I am sorry you are having an issue with downloading the drivers. I would check with your Internet provider since this seems to only be happening on your PC. Your Internet could be dropping the connection, if even for a millisecond or a few seconds. Any drop in connection can cause downloads to fail.
    I hope this helps
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • My HP 5610V all-in-one is no longer recognized by any pc as a working equipment.

    My HP Officejet 5610v All-in-One is no longer recognized by any of my pc's.  When I plug it in to another pc it says that the device is not recognized or malfunctioning.  All the local or off line functions of the printer, such as copy and fax is working just fine, but it is no longer recognized by the pc as a printer or any functioning device.  I change the printer cable already and setup the printer to the original factory settings but no change.

    I have XP Pro in one of my laptops and Vista on the other.  I really don't think this is a PC or operating system issue because both pc's used to recognize this printer but now both of them say that it is a malfunctioning equipment that is connected to the usb input and it is not recognized at all by the pc as to what type of equipment it is and they recognize other printers immediately.  
    Thanks for trying to help anyways.

  • HP Officejet 6500A How do I scan a document with multiple pages into one file?

    HP Officejet 6500A Plus e-All-in-One Printer - E710n
    Windows 7 (64 bit)
    How do I scan a document with multiple pages into one file?  My old printer (psc 2110) asked after each scan if I wanted to scan another page.  At the end I had one pdf file with multiple pages.
    This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
    This question was solved.
    View Solution.

    Hi mpw101,
    If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for