One other question about hyperlinks

I nearly forgot to ask this.
Is it possible to hyperlink from one part of a page to another, within the same page. For example, if i talk about a style of music that I write, and lower down the page there are some examples, is it possible to write click HEREto listen, and be taken lower down the page?
I know it can be done in HTML, but i cant see a way in iweb.
Anyone?
David Tobin

Hi,
This is called anchors. But it is pretty hard to do. Varkgirl has a tutorial here:
http://www.varkgirl.com/Anchors/One.html
Cyclosaurus has a different method here:
http://geocities.com/[email protected]/anchors_1.html

Similar Messages

  • Installing windows 7 and one other questions about boot camp

    I have a 20 inch iMac with Mac OS 10.5.7 and all updates. I am thinking about upgrading from vista on boot camp to Windows 7. I know what to do but i wanted to hear some personal experiences from other people. Also, a long tome ago, I tried to install Windows XP but realized half way through that I did not have a product key. It turns out I did not need one, but I tried to cancel the installation process and all I would get was "Press any key to restart" and I would be sent back to the beginnign of the installation. I was trapped in a loop. For future reference, how do u "escape" this loop? Thanks

    You 'escape' by not killing it. And most people have to redo their entire install to get things working properly.

  • I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

    I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
    I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
    Is there any way to get more VRAM to play games on steam?
    I've learned  by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
    So the two questions are...
    Is there any way to upgrade my VRAM, so that I can play games on steam?
    Why do I only have 256MB VRAM when I have 8GB total RAM?
    Other Info:
    I have a quad core i7 Processor.
    My graphcics card is the AMD Radeon HD 6490M.
    I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
    THANK YOU SO MUCH IF YOU CAN REPLY,
    Dylan

    The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included).  You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
    If you are very much into gaming, the I suggest A PC.  They are far superior for that type of application to a MBP.
    Ciao.

  • Verizon iPhone - mobile hotspot and other questions about the data options

    I just ordered the Verizon iPhone. Can anyone explain the options here:
    1) Unlimited corporate email & Web (business and personal email) vs. Unlimited email and web for smartphones (personal email) - what's the difference?
    2) "3G Mobile Hotspot 2GB" - does this mean that there's no way I can share my 3G connection via wifi without paying the extra $20/month?? How about tethering to a single computer (USB, BT, or WiFi) - does that also require this extra option?
    3) equipment protection - what's the difference between Extended Warranty, Asurion Wireless Phone Protection, and Total Equipment Coverage?
    thanks in advance,
    Mike

    Hi
    Regarding your #2 question; yes, you must pay $20/mo to use the 3G Hotspot aspect of the iPhone, same as with any of Verizon's phones that offer this feature such as the Droid X, HTC phones, etc. And, there is NO additional charge to tether it to your computer; it's $20/mo regardless. You can still use the iPhone's WiFi feature to search the web which is part of the regular data plan. We're only talking about paying the $20/mo for the "up to 5 devices" jumping on your phone as a hot spot.
    I'm an Apple fan, have my MacBook Pro, but my phone is a Droid X. I've been a Verizon member since a year before they became Verizon. Additionally, I am part of the Verizon & Motorola test forum; testing new software updates as they come along.
    Something you should know about Verizon's 3G Hot Spot feature; it has issues. Those of us in the Motorola & HTC forums have experienced identical issues with regard to the 3G Hot Spot feature; it disconnects every 2 minutes, even when you are actively surfing the net. Verizon & Motorola Support have been very helpful to provide what they believe are fixes, including: changing the channel, hard resets, clearing cache, etc. It does not work. Most of us believe, this is NOT a Verizon issue, but a phone maker issue.
    I also have Verizon's MiFi 2200. It costs $59/mo and is purely a hot spot device; again up to 5 devices. I use it at home, for my lap top and for those who need connectivity. It outperforms the 3G hot spot feature of the Motorola & HTC phones by leaps & bounds, and I suspect it will out perform the 3G hot spot feature on the iPhone. Additionally, you get 5GB of download with the MiFi which Verizon is planning on offering increases to 8GB & 10GB. There is NO plan to increase the 2GB download limitation on the 3G Hot spot of the iPhone & other phones, and anyone who does basic software downloads & pics, knows 2GBS is not a lot space.
    So, I would recommend not paying the $20 until this is resolved. If you do, you could pay $39 more for a total of $59/mo for the MiFi, download the software to you home computer & notebook, and end up canceling your home internet service. I did this and have saved $70/mo in my total utilities.
    One other important note: Verizon's VZManager Software for their phones & MiFi. If you did pay the $20/mo for the iPhone and decided to tether to your USB port (for power while using) and you were to use the 3G hot spot feature, it will NOT work on 64 Bit computers, regardless if you are using the WiFi feature or directly using VZManager. The MiFi has this same issue. It will only work on 32 Bit when tethered. So, you'd have to reboot your computer to 32 Bit, if you have that ability. On a Macbook Pro, simply restart holding down the "3" & "2" keys.
    I have no idea why Verizon can't simply upgrade the firmware, even recent firmware upgrades have not resolved this. Most new computers are 64 Bit now.
    Despite this, I use my MiFi 100% untethered and carry my charge cord in my bag as it also works on my Droid, and I presume they may do the same for the iPhone; reduces the need for multiple power cords.
    I really looked forward to the 3G feature of the Motorola & HTC phones, but honestly, it's just not there yet; mine was slower than Dial Up, and I'm not kidding.

  • One last question about capturing from tape

    I have a box full of family VHS tapes that I will be capturing into the computer to digitally archive. However, I want to make sure I am doing it the best possible way. These are the two things most important to me:
    1. Quality
    2. Longevity
    1. Quality
    I have a VHS/MiniDV JVC SR-VS30 deck connected via firewire into my 2014 iMac. I know that firewire is typically the best option when capturing DV footage into the computer. However, is this still true for VHS and other forms of old tape. I can hook anything up to this deck via composite/s-video in and go out through the firewire connection. However, I wasn't sure if firewire was the best coming from a VHS tape. I also have an old video capture card that has a straight s-video/composite input. Which would be more native to the VHS/analog tapes as far as keeping original quality and the best possible image?
    When I use the JVC deck, some programs will capture the vhs tapes and others won't because they won't recognize unless I'm using the DV side. For example, FCPX recognizes the deck, but when I go to import unless it's a dv, it will say "no tape" and I cannot capture anything. iMovie will capture files as .DV. Quicktime will also recognize the deck and capture files as apple prores MOV files. When I compare the QT and iMovie, the QT files look better in my opinion, though I don't know if they truly are. The iMovie dv files have jagged edges like tv lines or something during quick movement and like others say about firewire it looks a little "milky" (though I know this isn't necessarily a bad thing). The QT clips don't necessarily look sharper, but they don't have the hideous jagged edges.
    So my question before I start this large project is:
    Which capture methods above would you use, or what else would you recommend for best quality?
    2. Longevity
    Which file format would you recommend saving these files (or just keeping them as they are at capture) for long term storage? When I come back to these files in 10 years and need to convert them to something new, I want them to have the greatest chance of being compatible with whatever lies ahead. There are so many different file formats.
    Many thanks for any help along this long process

    I want to make sure I am doing it the best possible way.
    I have done lots of that.
    For maximum quality here is my procedure:  ADVC300 > iMovie 06 > iDVD 09/11. 
    To get your VHS video into iMovie, use the Grassvalley ADVC300 .  With the ADVC300 Audio and Video go in, FireWire comes out. It also comes with a nice Macintosh application that works flawlessly with iMovie 06 and iDVD 09/11 (I have used it a few times with iMovie 11).
    The ADVC300 has been discontinued by the manufacturer. The included software (which is not really necessary but does enhance performance) is not compatible with OS 10.7 or newer.  You can still find the ADVC300 for sale in a few outlets as well as eBay. It will sell between 50% and 100% ABOVE its retail price. Yes, it's that good.
    If you can’t find the ADVC300, use the Grassvalley ADVC110.
    I have a drawer full of analog-to-digital converters.   After using the Grass Valley ADVC300 I find nothing else acceptable.
    The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source (VCR, Tivo, Satellite Receiver) and convert it to FireWire (iMovie will treat it like a camera).
    I would use iMovie 06 with iDVD 09/11, why?
    iMovie 09, 11, and 13 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.  (Also the latest iMovie CANNOT set Chapeters !)
    After lots of experimenting I get the best results using OS 10.6, iMovie 06, and iDVD 09/11.  My movies look just like Hollywood!
    My primary computer is a Mac Pro, so I just use one of the four hard drives and boot OS 10.6. You can also partition a single hard drive to achieve the same results.
    This may seem like more trouble than you want to go through.  However, I find the superior quality to be well worth it.

  • One last question about Apple IDs

    I thought id asked the lot but there is one last question. How does one delete an Apple ID?
    Many thanks again
    Anthony

    Hello Again Anthony!
    "How does one delete an Apple ID?"
    You can't.
    After you quit using an account, it's posts, will be archived. What that means is, that if there are no additional responses in the Threads they reside in, the Topics will get continually pushed down on the Topics list. After a certain amount of time, maybe 2 to 6 months, the Threads will be locked, so no responses can be entered. But the Threads will not disappear.
    Threads in heavily trafficked Forums, may be archived more rapidly than those in areas, with less activity.
    The Topics that you started using the account, will show your the Alias, in the Author field of a main forum page, but eventually, readers will have to keep going to the succeeding pages to view them.
    If someone were to do a Discussions Search, using these parameters:
    Restrict by Category or Forum: All Categories
    Restrict by Date Range: All
    Restrict by Username: Your Old Alias
    all of your posts, created since about 11/13/05, would be found.
    ali b

  • One more question about upgrading HD

    EVeryone was really helpful last time, I have one final question:
    Does the name matter for the HD?
    I have bought my HD, used SuperDuper and am actually already working off the new HD via Firewire.
    Does it matter what I NAME the new Drive? When I used Super Duper I called it "New Startup". The current HD is called "Macintosh HD". Is this a problem?
    Thanks guys!

    @Niel: How about localized chars (ä, ß, î, etc.) and such ones that may have a special technical meaning (like /, *, -) ?

  • TrackControl, Change Track, and others questions about AvTransmit

    Hi there,
    I've got multiples questions about JMF and AvTransmit, hope you will help
    For a small student project, i'm developing a streaming server using JMF, i have used the AvTransmit example.
    Streaming, etc... everything work fine, i stream music over web
    But i need help with "playlist" :
    // Get the tracks from the processor
    TrackControl[] tracks = processor.getTrackControls();
    First Question :
    The Processor use a MediaLocator to get one track, is there a way to indicate multiples tracks, such as a directory containing multiples audio file ?
    At this time, i can only set 1 file in the MediaLocator.
    I'm using a simple class as Playlist (a File[]), and, when i want to change song, i stop the thread, change the MediaLocator with another file, and restart the thread.
    It works on a Lan, but on Internet, Player (I use VLC for my test) lost the connection, i need to restart VLC to get audio again.
    Second Question
    Is there a more "elegant" way to change tracks ?
    Last Question
    I have think about building my own object Playlist... gasp...
    I've look at the javadoc... but i'm a bit lost... does my class have to implement TrackControl ? what are the object inside etc...
    If someone knows information about this...
    That's all ;)
    Thanks !
    Tommy, french student (sorry for the english)

    First Question :
    The Processor use a MediaLocator to get one track, is there a way to indicate multiples tracks, such as a directory containing multiples audio file ?
    At this time, i can only set 1 file in the MediaLocator.No. The processor uses a MediaLocator to get one file. Files (can) contain multiple tracks.
    You can, in fact, combine the tracks of multiple files together, but, there's no need to do that with your application. AVTransmit2 sends each track as a separate RTP stream, so you'd just be sticking them together just to pull them apart again.
    In general, you want to keep your architecture as one processor per file, one RTP stream per track.
    Second Question
    Is there a more "elegant" way to change tracks ?Yes. It's what I refer to as a jukebox DataSource. I discuss it / explain the concept on this previous thread.
    [http://forums.sun.com/thread.jspa?forumID=28&threadID=5400318]
    What you're essentially doing when you change the MediaLocator is starting over from scratch. You end up with a whole new DataSource, whole new Processor, whole new RTP session. On the LAN, this isn't an issue because it looks like you paused the RTP session (because the IP/PORTs don't change).
    Over the internet, though, when you stop sending and restart, you're very likely going to get a new public NAT port. And so when your stream gets to the client, it's going to look like it's from a different person than the original.
    The solution is to use the jukebox datasource to change the media without restarting the Processor or the RTP streams. That'll ensure that your stream won't move between files from the perspective of the client...
    Last Question
    I have think about building my own object Playlist... gasp...
    I've look at the javadoc... but i'm a bit lost... does my class have to implement TrackControl ? what are the object inside etc...
    If someone knows information about this...Ummmm, your "Playlist" object should just be a Jukebox datasource, so follow the link and figure out how that's supposed to work. If you have questions about it, just ask 'em here (rather than on the older thread)...

  • One more question about "snap to" points in audio objects

    sorry, one more question people.............. is there a way to set a "snap to" point in an audio region? Can I have logic set a point, or an "anchor" within an audio region that would coincide with the cursor. Once I get the cursor to a bar or a beat, is there a command that would allow a "snap to" point to be created in an audio object? That way I could clean up any "noise" or "chatter" at the beginning of an audio bounce or any audio object, and still have no problem pasting it all over my arrangement. I'm sure it's in here somewhere, but can't find it in the manual..
    thanks again!!!

    The anchor point in an audio region can be moved to wherever you want it to be. Let's say you recorded a loud piano bass note and afterwards you trimmed the file so that the attack of this sound happens right at the beginning of the audio region. Your anchor point will now coincide with the begnning of that region. This means that you can place that audio at, say, bar 37 and it's guaranteed that the attack of that sound will play exactly at bar 37. In this case anchor point = position of audio region in the Arrange Window.
    Even though you haven't played a MIDI note into the song in order to place this audio region, an "event" is generated for this sound which can be viewed in a special version of the Event Editor which shows the position of all audio regions in the arrangement. Access this by simply clicking on a blank area of the Arrange window and then opening the Event Editor.
    So let's say this sound is positioned at bar 37. Open the Event Editor (as described above) and you'll see an event at 37 1 1 1 and the name of that audio region to its right. In this case, the event's position = the start of the sound file = the position of the anchor within that sound file. If you changed the position of that event to 38, or 109, or 3, that audio region will be "triggered" at any of those positions. That sound will always "attack" on a downbeat.
    Now let's say you reversed that pinao note in order to create a dramatic swell into a section of your song. (Open the sample editor and use the Reverse function). At this point, the anchor point is still positioned at the beginning of the file! Play back the sequence (from our bar 37) and the audio will play back from bar 37, only backwards this time; the peak of that piano note will be at some point later than 37.
    So let's say you wanted to position this sound so that it hits exactly on the downbeat of bar 37. How do you do it? Well, you could always slide the audio file in the Arrange Window and try to line up the attack of the audio waveform with the downbeat of bar 37, but there's an easier way...
    Open the sample editor and move the anchor point to the end of the file, coinciding with the peak of the waveform (the piano's attack is now at the end because we reversed the audio). Next, close the sample editor window, click on a blank area in the Arrange Window and open the Event Editor. You'll see that this audio region is still positioned at bar 37, but the actual beginning of the sound file now starts before bar 37. Now when you play back, Logic will start playing that sound file before bar 37, but the audio's peak will be lined up at bar 37.

  • Default values and other questions about MIO-PCI-16E-1

    Hi, I have a few questions involving the above mentioned board.
    First: When doing a data acquisition using an external digital trigger and an external clock, which edge of the clock signal is read by default?
    What is the delay between a STARTSCAN signal being received and a CONVERT signal being generated (signifying an ADC convertion taking place?)
    Finally, what exactly is the sample interval counter? What does it do? This is mentioned on page 4-32 in the E Series DAQ user manual.
    Hopefully these questions aren't too stupid We're designing some custom circuitry to work with the DAQ, and for things to work the timing must be precise. We need ALL the timing details about a single data acquisition t
    hat we can get.
    The system we're running on has Labview 6.0.2, and we are only acquiring data from one analog input.
    Thanks a ton!
    --Randall Cameron

    Hey Randall,
    The internal Scan Clock is a rising edge clock, if you are interested in having the rising edge clock output as high until a scan is complete, please refer here. The internal Convert Clock is always falling edge clock.
    If you are using an external signal, you can specify the polarity of the signal by selecting PFI pin, high to low, or low to high, if you are using the Clock Config VI. The method for setting the polarity changes based on the method of programming the card. And again, I do not know what the digital trigger defaults to, but you can select either polarity.
    The delay between a Scan and a Convert is based on the Convert Clock.
    Ideally, the delay is in the nanosecond range, and then the Convert Clock determines the spacing between any further samples.
    As for the sample interval counter, the following is pasted from page 4-35.
    �The sample interval counter on the PCI E Series device normally generates
    the CONVERT* signal unless you select some external source. The counter
    is started by the STARTSCAN signal and continues to count down and
    reload itself until the scan is finished. It then reloads itself in preparation for
    the next STARTSCAN pulse.�
    So just let us know if you have any questions on getting the polarity set up, or if anything is not fully explained.
    Best regards,
    Justin T.
    National Instruments

  • Other question about Automatic Resolution Gap

    Hi again.
    I 'm confuse about function of Compression of Log Archive Dest, so I have this question:
    Is Log Archive Dest Compression Atributte valid only for Resolution GAP???????
    Thanks again.

    LOG_ARCHIVE_DEST_n = '....... COMPRESSION=enable ..."
    I believe this attribute is set to enable compression *during redo gap resolution*.
    According to MOS Redo Transport Compression in a Data Guard Environment [ID 729551.1],
    In 11gR1, it is also possible to enable compression *duing redo transport service with Maximum* *Performance* using the following hidden parameter.
    _REDO_TRANSPORT_COMPRESS_ALL=TRUE
    According to OOW 2010 presentation,
    In 11gR2, redo transport compression can be enabled *with all data guard protection modes.*

  • One last question about upgrading my old computer

    I  purchased an older HP computer P6243W
    (it's all I can afford on my VA disability)
    I'm looking to upgrade the video card buy purchasing a low priced PCIe Express X16 video card
    I need a little more video power to play diablo 3
    (please forgive my ignorance)
    Question 1:  Will a PCIe Express 2.0 X16 work in the slot ?
    Question 2: The intergraded video on the mother board uses ddr2 memory can the video card I purchase use gddr3 memory ?
    ** Thank You in advance for any info you may be able to give **
    This question was solved.
    View Solution.

    JohnBolo wrote:
    I  purchased an older HP computer P6243W
    (it's all I can afford on my VA disability)
    I'm looking to upgrade the video card buy purchasing a low priced PCIe Express X16 video card
    I need a little more video power to play diablo 3
    (please forgive my ignorance)
    Question 1:  Will a PCIe Express 2.0 X16 work in the slot ?  The PCI Express slots are backward compatible.  Therefore, the PCI Express 2.0 will work in PCI Express 1.0 slot.  Here are the System Requirements for the game.  The recommended video card is a HD 4870 or larger.
    Question 2: The intergraded video on the mother board uses ddr2 memory can the video card I purchase use gddr3 memory ?  Once the dedicated video card is installed the Integrated Video is disabled.  Therefore, they are independent of one another.  The major conecern when buying a dedicated video card is, the wattage required for it to operate properly.  I believe that the power supply unit (PSU) in your computer may be 250W to 300W.  You can check the lable on the PSU to find the wattage.  It will be difficult to find a video card that will operate with that wattage.
    ** Thank You in advance for any info you may be able to give **
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Adobe Flash crashes and other questions about Flash

    There have been several instances of Adobe Flash crashes whether I am using Firefox, IE or Google Chrome browsers - and simply reloading the page corrects this BUT recurs again and again.
    I'm running Windows 8.1 64bit in which the Flash program apparently comes embedded in the OS as a 32/64 bit hybrid. When I inspect the Flash version add-on in Firefox, and run an update check, Adobe reports, correctly, that my system is Windows 64bit , English, Firefox. Then, when I do the same in Windows Internet Explorer by checking the embedded version, I get a message that KB2999249 is available for download to correct Flash issues in IE. Since that install, Flash hasn't crashed in IE [yet].
    So, my question is: How can I be certain that when Firefox reports that Flash is "up-to-date" that it is indeed a 64bit compatible version? Note that the Adobe download site only identifies one available version for Firefox, IE and Google - the current version being 15.0.0.152 file: NPSWF32_15_0_0_152.
    Does the "32" part of the file name suggest that it is a 32bit application and, if so, where can I find NPSWF64_15_o_o_152 [if it exists]?
    ''edited the title of this thread to reflect the questions asked''

    I now understand the version nuances between the browsers and thanks for the response. Now what, if anything, can I do to address the continuum of Flash crashes since I find it difficult to believe that I'm the only user experiencing this anomaly?

  • FI-LC:One simple question about Consolidation

    Hi.I'm a new one in FI-LC.Now I'm reading the SAP Library(Release 4.6C, March 2000).There are some word in the article of Consolidation (FI-LC)->Consolidated Entity:
    This and the following sections often refer to the Implementation Guide. Unless otherwise specified, the implementation guide for Consolidation is implied and can be invoked in the R/3 Customizing Implementation Guide via Financial Accounting -> Consolidation.
    And I try to found the Financial Accounting -> Consolidation in the IMG of sap but fail.Of course  I could not found other function under the Financial Accounting -> Consolidation in the IMG,such as "Master data -> Companies".This question let me fell haze.
    Could some one tell me the reason or give me some advice?Thank you.

    Hi
    Andreas is right. FI-LC has been replaced with EC-CS or SEM-BCS depending on the release. Here is some more information:
    Note 335969,  458332, 399334. 836726
    Also see  http://service.sap.com/sem
    Best regards, Kyoko

  • Family has problems viewing my page + other questions about iweb 08???

    Hello: I have been using iweb 08 since it came out and have had nothing but good things to talk about it. I ususally test my website on the library pc's or on my mac using firefox. I never see anything not working. My family and friends however always tell me about things not working and not showing up. They say it takes a long time to load - I am not sure if that is the problem overall or if it comes from them using Pc's (windowns xp mainly).
    My questions:
    1. How can I make sure that the content of my page does not take too long to load if I am using music, videos and images? (I know to look at the file sizes of all of them, but is there another trick)
    2. Can I have a main page for everyone to view my welcome page and then password protect the rest of the page only to my family? Or even make some pages only available for eg. Mom and Dad with another password?
    3. Does a Hit counter not work when publishing to my own domain? If yes, why do comments and password protection work then?
    4. Is it possible to link a page from my start page where I incorporated a picture and enable my viewers to see it larger when clicking on it without me making a new site that shows up in the top panel (just like about me, blog, photos, movies)
    5. There used to be a page to look at .mac customers and what they did with their membership. Starting their own business, military wife uses web gallery etc. I can't seem to find this page again, does anyone know the link.
    I know this is a lot, if I could I would offer a reward for all the answers I need. Thanks though for helping me out, I try to help out as much as I can myself. Thank you. Sabina

    Your site is loading OK but slow in Windows XP running IE V 7. The form is loading too. Maybe its a Vista problem?
    My general rule is that if your site locks IE then you have to reduce the page size and optimize.
    If it loads slowly and shows layout anomalies, then optimizing will usually cure it.
    I have been using Web Site Maestro for several years and can highly recommend it. Download the trial version which will optimize 50% of your files and watch the screen to see how much it reduces the individual file sizes.
    For an example of photo file reduction see....
    http://roddymckay.com/PhotoStuff/PhotoFile.html

Maybe you are looking for