One P.O . for all plat in intercompany stock transfer

Hi Experts
In Intercompany stock transfer scenario
Client demand to create Single P.O. for all plant,
(one company code has 5 plant for this 5 plant they procure goods form another plant which belong to deiffernt company code so here client want to raise single P.O. for this 5 plant )
Is it possible ?
if yes what is customization for that
thanks in advance

Hi ,
As per my knowledge this is not possible , because you can enter only one plant in PO.
you can have 5 PO's for 5 plants...
Lets wait for others reply..
Regards,
Ramesh

Similar Messages

Creating Single PO for all Sites in Intercompany Stock Transfer

Hi Experts
In Intercompany stock transfer scenario
Client demand to create Single P.O. for all stores ,
Is it possible ?
if yes what is customization for that
thanks in advance

STO CONFIG:
The following steps have to be followed in order to configure stock transport order
between two plants.
1. Create a vendor for the Company code of the receiving plant using account group 0007
via T-Code XK01.
2. In the purchasing data view assign the supplying plant and the schema group
3. Create customer with the sales area of the vendor.
4. The shipping conditions, the delivering plant and the transportation zone determine the
route in the STO.
5. In the pricing procedure determination relevant to the STO assign document pricing
procedure and customer pricing procedure to get the pricing in the invoice.
6. Maintain condition records for pricing condition.
7. Maintain carrier as a partner in the customer master.
8. In OMGN select the supplying plant and assign the company code and sales area.
Similarly select the receiving plant and assign the company code and sales area (The
company code to which the plant is assigned to).
9. Assign the delivery type and checking rule to the document type.
10. And finally, assign the purchasing document type to the supplying plant and the
receiving plant.
11. Create the STO using T-Code ME 21N and save.
12. Check for release strategy if any and release using T-Code ME 28.
13. Create delivery in background using VL10G.
14. If delivery is created, it is an indication of correct configuration and master data
creation.
Stock transfer between two plants in deffernet company codes is known as inter company
stock transfer.
Material shoud be maintained in both supplying and receiving plant MM01
Sotck should maintain only in supplying plant MB1C
Create receving plant as a customer in suplying plants company code and sales area
XD01
Assign this customer number in receving plant detials OMGN
Assign supplying sales area in supplying plant details OMGN
Assign delivery tupe NB for in combination of supplying/ receving plants.
Create STO ME21N
As it is normal there in the item details wer should get shipping date i.e customer number
Go for Deliveryy VL10B
Shipping point *****
Select PO go for execute
then select the delivery then go for delvy ............create delvy,,,, delvy nubmer generated.
Goods Issue VL02
Delvy doc **********
Click on picking
enter the picking qty
Click on PGI
in the mean time check in the PO history you will get the details
Goods receipt MIGO
Stock overview the stock will be updated....

Intercompany stock transfer without billing

Hi experts,
I have one issue. We want to map intercompany stock transfer for spares and consumables without billing.
Is it possible in SAP? If possible can anybody tell the business process step by step with transaction?
points will be awarded
Regards,
Santosh

Hi,
normally, the intercompany stock transfer process is not billing relevant, but the
cross company stock transfer is billing relevant;
step-by-step process for intercompany stock transfer:
======================================
the question is if you want to do the process with or without a delivery, in one step or two steps...
one of the processes is following (with delivery - two step):
1) me21n -> create purchase order (UB)
2) vl10b -> create outbound delivery (NL) and post goods issue within vl02n (movement type 641
-->> after this step, the material will be in stock in transit
3) migo -> A01 post goods receipt - R05 with reference to outbound delivery
(you can also do it with reference to the purchase order, but you could have changed something within the delivery -> check note 326539)
-->> if you would need an inbound delivery for your process, this is also possible, and you can also create it automatically)
(you can check notes 421276, 490865, 497287, 965176 regarding this)
if you want to do it with delivery with one step
you just have to do point 1) and 2) -> here with movement type 647, that also makes the post goods receipt and you do not have to do point 3)
if you want to do a stock transfer process without delivery,
you should post goods issue and receipt with migo with reference to the purchase order
you could also check notes 498143, 842829 for more information, f.e. about customizing settings
hope I could help you,
regards,
Ely

Idoc issue in Intercompany Stock transfer process

Hi all,
In the Intercompany Stock transfer process; the intercompany billing document is created, and idoc is also generated with status 53, but the document (vendor invoice) is not created.
when i double click on 53 status of the idoc in Tcode WE02 the error is " Batch input session IVEGINTERCOM was created".
it means the input session has been created but not processing automatically.
i can see the session in SM35.
how to make the session to get process automatically?
please reply soon.
Regards,
Shwetha

Hi Shwetha,
If the same session name gets created every time when an intercompany invoice created, then you can put the session name, need not to give any date and Select the status as NEW and save as varaint.
Define a backgrond job and fix up the frequency as per your business process. ( How frequently this needs to run.. On Daily or On Hourly basis), This is another way, without disturbing the Inbound process code.
To follow this process, please ensure that the session name is same every time.
Regards,
Sai

HT204053 Our family uses one Apple ID for all of our iPhones. We installed the update and now we are all getting each others photos and texts. How do we stop this?

Our family uses one Apple ID for all of our iPhone 5's. We installed the update and now we are all receiving each other's pictures and texts. How do we stop this?

Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

HT4436 My family has multiple iPhones. Can we use one Apple ID for all of our phones?

My family has multiple iPhones. Can we use one Apple ID for all of our phones?

If you use the same AppleID for iMessage and iCloud though, you will all be sharing the same message account and iCloud email account. You can use a common AppleID for purchased content, but each create your own unique AppleID for iMessage and iCloud so you each have your own private accounts for those services.

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

How to get One Selection Screen for all queries?

Hi Experts,
I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
I think there should be some way of getting it done.
Waiting for your inputs,
With kind regards,
Shreeem

Hi
If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
Hope this helps,
Aparna Duvvuri

HT201251 I want to use 30 ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices

I want to use 30 ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices?

Alternatively you can always manage your iPads (does not matter how many) with a single apple id and all reporting to your account under "find my device" service. Keeping an eye on all your units. Additionally as you mentioned these are for your Restaurant you may find the solutions offered by this company who creates apps and hardware for this purpose: http://www.spartakioskpro.com
Additionally if you expand beyond those 30 iPads to say 300 you will want to enable or plan on MDM as your best option to automate every ipad to use the same profile and app and ios configuration while also keeping a close eye on all of them via online MDM services like: https://meraki.cisco.com/products/systems-manager
Here is a pic

How to force RH9 to use only one master stylesheet for all Word imports?

I have set a stylesheet (css) as the default for my RH9 WebHelp project in project settings. When I import Word documents into the project, the edit import setting dialog does not show this stylesheet in the list of available stylesheets for the import.
What is happening instead is a proliferation of unwanted stylesheets derived from all the imported documents. I then have to manually re-set all the new topics to the master stylesheet.
How can I stop this, and force RH9 to use only the one master stylesheet for all imports?

cid:[email protected]
Hi Peter,
That’s what I thought I was doing in the Project Settings>Import tab>CSS for Style Mapping selection. Maybe that isn’t what it’s meant to do. It’s just getting annoying having all these unneeded files popping up in the project manager so that I have trouble distinguishing the “real” topics from the extra stuff.
Michael West | Business Improvement | Aurecon
Ph: +61 3 8683 1996 | Fax: +61 3 8683 1444 | Mob: 0407 485 228
Email: [email protected]
PO Box 321, South Melbourne | VIC 3205 | Australia
http://www.aurecongroup.com
http://www.aurecongroup.com/apac/groupentity/

HT1879 how to buy multiple songs for one person & pay for all at once

i want to purchase a bunch of singles for one person, & pay for all at once. is that possible?

Basis can do a export and import transport, still if don't have connection between boxes.
or
check this
http://www.sap-basis-abap.com/abap/copy-program-variants-from-one-to-another.htm
a®

Publication using "one database fetch for all recepients" is a failure

Hi,
I have created a Publication in *CMC* with Crystal Reports as Source Document. When I schedule it with option " One database fetch per recipient" it is a Success. But while using the option "One database fetch for all recipients" it is a Failure.
I tried this with Personalization value Parameter as well as Filter. But both combinations throw an error message when used with Reporting Bursting Method "One database fetch for all recipients".
Anybody who has worked with Publication please let me know in which scenario one can use the Advanced setting:
Report Bursting Method
"one database fetch for all recepients"
Regards,
Amogh.

Howard,
The method I use is to put the connection script in a file outside the web root. Although the file has the same name on both the local and remote servers, the details are specific to that particular connection. Then each page in the website has the following PHP script.
require_once '../outside_folder/.db.php';
This method is also more secure than including the connection details inside the web root. Also note that the file name begins with a period and ends with the php extension, both for added security.

Publication using 'One database fetch for all recipients' is a Failure

Hi,
I have created a Publication in CMC with Crystal Reports as Source Document. When I schedule it with option " One database fetch per recipient" it is a Success. But while using the option "One database fetch for all recipients" it is a Failure.
I tried this with Personalization value Parameter as well as Filter. But both combinations throw an error message when used with Reporting Bursting Method ""One database fetch for all recipients"".
Anybody who has worked with Publication please let me know in which scenario one can use the Advanced setting:
Report Bursting Method
"one database fetch for all recepients"
Regards,
Amogh

Howard,
The method I use is to put the connection script in a file outside the web root. Although the file has the same name on both the local and remote servers, the details are specific to that particular connection. Then each page in the website has the following PHP script.
require_once '../outside_folder/.db.php';
This method is also more secure than including the connection details inside the web root. Also note that the file name begins with a period and ends with the php extension, both for added security.

I downloaded mountain lion on my laptop. Do I need to do the same on my Desktop and iPad or is the one download good for all 3, and how do I do that if it is?

I downloaded mountain lion on my laptop. Do I need to do the same on my Desktop and iPad or is the one download good for all 3, and how do I do that if it is?

If your desktop computer is one that supports Mountain Lion, you can either download it there or make a bootable jump drive with the installer on it -- assuming you haven't yet used the installer you downloaded to your laptop.
As for the iPad, it doesn't use the same OS as the Macs do; it uses iOS versions, so Mountain Lion won't work there.

SAP Business one Manual / Documentation for all Modules

Hi,
SAP Business one Manual / Documentation for all modules is required by our client.
The details should include screen wise explanation of each and every form in the SAP Business one package for all modules.
Please provide me with link so I can download such information which would be useful for the User post implementation.
Regards,
Siddhesh

hi siddesh,
Best user manual is context help available in B1(Press F1/ ? mark),It is also available
in this link for 2005 & 2007 Versions.
http://help.sap.com/saphelp_sbo2005b/helpdata/en/1d/48a291fc4a0448bbc8dacd344e956c/frameset.htm
Crispy overview of all topics can be available in wiki page
https://www.sdn.sap.com/irj/scn/wiki
More documents is available in service market place which requires s-userid & password.
http://service.sap.com/smb/sbo/documentation.
Edited by: Jeyakanthan A on May 15, 2009 4:33 PM

One P.O . for all plat in intercompany stock transfer

Similar Messages

Maybe you are looking for