One page in my site has 3 columns but when I publish the site it shows up with 2 columns

I set up the site with 2 columns per page, except for one page which has 3 columns. I looks right in iweb, but when I publish the site it still shows up with 2 columns like the other pages...any idea how to correct that?

Clear your browser's cache (Command+Option+E for Safari) and reload the page. 
What's the URL of your site so we can examine it first hand?
OT

Similar Messages

  • Site previews fine in Firefox locally, but when I published the site all the text is the wrong size

    I am a rookie web designer. I recently created a site using CS6. http://www.joshuahetzler.com When I previewed the site in Dreamweaver it looked good in Firefox and IE. I published the site and now it is messed up in Firefox. All the text is the wrong size. Does anyone know how to fix this? Does it have something to do with my hosting provider? (I deleted a wordpress site from the directory an hourago and put this new site in its place) Why does IE display properly, but not Firefox...

    Caused by a bad link to your site's CSS file.  This is pointing to a file on your local hard drive which nobody but you can see.
    <link href="file:///C|/hetzlerj/jhgc/menu.css" rel="stylesheet" type="text/css" />
    Open your template and reconcile the path to your site folder.  It should probably look like this:
    <link href="../menu.css" rel="stylesheet" type="text/css" />
    Save Template.  Populate changes to Child pages.  Upload Child pages.
    Nancy O.

  • I have a site published that i need to change, but when i publish the new pages it dosen't change the site that's already published. How do i remove the old site?

    I have a site published that i need to change, but when i publish the new pages it dosen't change the old site.

    See if this helps you any further :
    The concept of Sites in iWeb
    Also, clear the browser cache and reload the page(s).

  • TS2167 I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

    I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

    Just in-case anyone els runs into this, I figured it out... I was working from my hotel and apperantly the fire wall was not allowing anything to uplaod, but I wasn't getting an error message from iweb, it would say that everything was published succesfully even though it wasn't. Once I went home and used my connection eveything worked fine.

  • HT204088 I only purchase one time on Mar 03 - $4.99 but when I receive the bill ,it charge me double .

    i only purchase one time on Mar 03 - $4.99, but when i receive the bill, it charge me double

    Try the 'report a problem' page to contact iTunes Support (these are user-to-user forums) : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I opened up a radio site that i used to listen to on my old computer, but when i opened the site up, it said it needed a plugin, then it couldn't find the plugin and said unknown plugin (audio/x-mpegurl) please help!

    i opened up a radio site that i used to listen to on my old computer, but when i opened the site up, it said it needed a plugin, then it couldn't find the plugin and said unknown plugin (audio/x-mpegurl) please help!

    ChrisJ4203,
    Thank you for the help.  Every app on my phone was downloaded using my old I-tunes ID.  I just hope that they will re-download under my new ID because I still can't change it on my phone.  In order to change to the new ID it says I have to sign out from the old ID and change to the new one.  My problem is that I don't remember my password to be able to sign out from my old ID.  Then the phone says it can change my password through e-mail and I  agree but I never get an e-mail at my old address or the new one.
    BHuyett

  • The fonts I select don't show up when I publish the site.

    The fonts I select don't show up when I publish the site.

    Are you using one of the Web_Safe_Fonts  Web Safe Fonts? If not then any computer that does not have it installed as Kirk pointed out will substitute some other similar font and change the appearance of the page.
    Happy New Year

  • I tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

    i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

    That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
    You can read bout it here.
    http://support.apple.com/kb/ht1414
    If that does not work you will need recovery mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • Why is there a white line around 1200 pixels and will it show up when I publish the site?

    Hello,
    I am working on creating a website through Muse and as soon as my website exceeds 1200 in height, it shows this white line. How do I get it to go away or will it go away when I publish the site?
    Thank you.
    Nicole

    There is not such a limit. Could you post a screenshot of this white line?

  • My HTML snippet widget on iWeb looks great on iWeb, but when I publish the page the HTML snippet doesn't appear on the webpage.  Why?

    I pasted in some HTML code generated by Google Forms into the iWeb HTML snippet widget.  It looked great on my iWeb viewer, but when I published it to my website, the HTML snippet google form did not appear on my webpage.  Does anyone know how to fix this?

    What is the code?

  • My mozilla firefox on my desktop brings that the site has been blocked on most of the sites i put in. Help me undo that

    It brings that this site has been blocked due to recent activity that was considered spam

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Why it works for me but when other enter the site it does't work?

    ok i have done my site using java studio creator , everything works fine on my computer and other also can enter the site using direct ip. now the problem is a have a media component that access directly to the file , however i can listen to music through my computer brower but when my friend hit the site and click the music , it does't even load why is that happening i can't figure it out.
    Somebody help plz
    Thanks

    after i think for a while , i think this is the problem the url for the media player is
    <param name="FileName" value="C:\Documents and Settings\iBanky\My Documents\Creator\Projects\ibanky\build\web\resources\musicfile\&#37165;&#20013;&#22522; - &#28961;&#36084;.mp3" />
    <param name="AutoStart" value="true" />
    <param name="ShowControls" value="true" />
    <param name="ShowStatusBar" value="true" />
    <param name="ShowPositionControls" value="true" />
    <param name="DisplaySize" value="4" />
    <embed type="application/x-mplayer2" pluginspage="http://www.microsoft.com/netshow/download/player.htm" swliveconnect="true" name="winMime" id="form1:mediaPlayer1" height="96" width="312" AutoStart="true" ShowControls="true" ShowStatusBar="true" ShowPositionControls="true" DisplaySize="4" src="C:\Documents and Settings\iBanky\My Documents\Creator\Projects\ibanky\build\web\resources\musicfile\&#37165;&#20013;&#22522; - &#28961;&#36084;.mp3"></embed>
    </object>
    It is pointting to a folder in my computer , what i suppost to do so everybody can listen?
    thanks in advance

  • I have a problem when want to port forward some ports by tiping in my default ip adress but when i do the site justs stays blank. is there a way or something to shut this of so i can open ports?

    hello,
    i have a question, i need to open some port with firefox but when i type my default ip adress nothing happens, the page just keeps blank. so is there a way to turn this of or something?
    please help.
    best regards,
    Arne Demandt

    Firefox includes options of how to handle different content types, in your case the mailto links are probably set to "Use Firefox". For details of how to fix this see [[Firefox keeps opening many tabs or windows]], in particular the section "Change the action for a content type".

  • Image colors get massacred by iWeb when I publish the site

    Hi!
    Perhaps someone can help?
    I build my pages from within iWeb and the images look fine. Then I publish my site in a local folder and look at it using Safari. The images in Safari are clearly much darker than in iWeb using the same machine with the same screen. What is going on here?
    Obviously, iWeb is somehow transforming the color space when it subsamples the images. But to what end, and how can this be controled?
    Many thanks in advance,
    MP
    Alu 15, 2.33 Ghz   Mac OS X (10.4.9)   iWeb 1.1.2

    iWeb is changing your images to PNG image format.
    So two choices for you:
    1. Convert images on your own to PNG before using them in iWeb
    2. Prevent iWeb from changing your image to PNG by using the ORIGINAL SIZE button and by NOT using any effects like the frames and shadow effects

  • I paid for the annual subscription for Creative Cloud. but when i download the programs it showed me using the trial version. how do i get the full program i paid for?

    i bought 2 license for CC but i can't download full version for this. it always show like "download trial version". Please advise

    Please check if the 2 license are for CC team or CC individual, if it is for Team then you need to assign seat by sending the invite from the admin console & the user has to accept the invite.
    Unable to license a trial product with Creative Cloud for Team
    If it CC individual then please refer to:
    I'm a Creative Cloud member, why is my app launching as a trial? Mac OS 10.7.4
    creative cloud software says my free trial has expired, but I have a paid subscription
    https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    Regards
    Rajshree

Maybe you are looking for

  • Acquisition tax in Belgium/Germany-Posting with different tax codes

    Dear Friends, Does anyone have experience working with Acquisition tax in Belgium and German where the goods and services purchased within EU have 21% -input and output tax such that it is ZERO. But still Tax authorities need to see both input and ou

  • The majority of my iTunes Wish List is gone.

    My iTunes software recently updated about a week ago (12.01.26). When viewing my Wishlist today, my wishlist shrunk from hundreds of songs to a few songs that I have added recently. Why did this happen and how can I get them back? My Wishlist is a co

  • Connection to MS Access 2002 with password setting

    Hello together, i have a MS Access 2002 file with password protection. Now i want to connect with SQL Developer 1.1 (Win) to these "Database" File. The Connection to a unprotected File is running well. I it possible to connect to a protected Access D

  • Issue not to show all Workbooks during FIND in BEx

    Hi All, We have an issue with workbooks. When user tries to FIND with * in production he is able to see other's workbooks. How do we restrict the Find or disable the FIND in BEx for workbooks. Thanks & Regards, Sai

  • Upgrading to Photoshop CS3 problems

    I downloaded a trial copy of CS3 several months ago and decided to purhcase it online to upgrade from CS2. I downloaded the file, received my serial numbers etc... but when I try to run set up, it says I cant install CS3 because it conflicts with CS3