One parameter in open-doc url in webi not required

Hi,
I am using SAP BO4.0.I have made one open doc URL which links one report to another.While linking there is one extra parameter which have been added, means the linking in the first report is done for a prompt that is not present in the second report.Still, the linking works properly with the correct parameters being passed and I can navigate from one report to another.So I have come to a conclusion that if the prompt is not present in the second report that prompt is ignored in the first report(on which linking to the second report is present). Has anyone come across such a situation.
I hope I have made myself clear.

Hi Riddhi ,
That is purely depend on requirement.If you want to pass any parameter from master to sub report , then put prompt on Sub report and pass the value from Master.You can ignore the prompts.
In 4.0 we have option to leave the prompts to "default" in links.

Similar Messages

Open Doc URL with parameter in BI 4.0 to open Webi and Crystal report

Hi Experts ,
Has any one experienced the open doc URL to open the report and to pass the parameter to the new report .
I am well aware of the syntax of passing the parameter and use to work perfectly fine with XI 3.1 but its giving me griefs in BI 4.0 environment .
In the new report i am just trying to pass the Fiscal year as a parameter with the url i can open the report but it does not accept the value being passed with the url so i have to renter the values again .
I am using BO 4.0 SP2 Patch 6 and trying to intact with crystal and webi report built on top of BEx query with the fiscal year parameter defined in BEx query level .
Any comment on this will be appreciated.
Thanks,
Vibhav

Hi Nakul,
I am not using the user response to get the value i tested it in Crystal Enterprise environment i tired passing the following syntax
http://.../OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=...&lsSFiscal%Year%(Single%Value%Entry,%Required)={?0P_FYEAR}
{?0P_FYEAR} this is a variable comming form BEx query into Crystal i tired to use it and pass it to other report but i cannot pass it i have tried to pass the hardcoded value still i see the paramater screen and have to enter the value again.
I am not sure if anyone has tested this functionality in BI 4.0 environment .
Thanks,
Vibhav

How to pass # (Not Assigned) in open doc url ??

I am unable to pass # (Not Assigned) in open doc URL. I am also try %23 ( encoded form of #) but it show MDX error and when i supply directly # then my WebI report pull all the data i.e. my filter doesn't work. Please give me some way to pass # in opendoc..

http://boseimdev60:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AQgEkeXDfo5PpR_IFC.rse0&sIDType=CUID&sType=wid&sRefresh=Y&mode=full&sRefresh=Y&lsSCalendarYear%2fMonthTo=032010&lsSCalendarYear%2fMonthFrom=032010&lsSInfoprovider (Multiple Required)=ZPUR_C15&lsSPlant(SelectionOptions%2cOptional)From=&lsSPlant(SelectionOptions%2cOptional)To=&lsSPur Doc Category (Optional)=K&lsSPlant=%23
Here Plant=%23 i.e. in last i increase this prompt in WebI level so its work.

Passing report filter function in Open Doc URL

Hi All,
I have a requirement that the values entered in the input control on one report the same values should be passed to another report.For this I created a document linking from the first report to the second and passed ReportFilter([name of the object]) for that prompt on which I have applied input control.When we navigate from one report to another via the hyperlink we get a error saying that internet explorer have modified this page to help prevent cross site scripting.We realized that this is due to the ReportFilter function passed by us in the Open Doc linking because when we do not pass ReportFilter() function the link works properly.Any other method to capture the values entered in the Input control.
I hope I have made myself clear.
Thanks in advance.

Hi,
Yes both the reports are based on the same universe.I tried storing the values of the input control to a variable.But that too is giving me that cross site scripting error.I cannot add a second tab to the existing report and want it through OPEN DOC URL itself.
Please help.

How to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part

Hi,
I want to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part like mentioned below:
http://server/pages/Default.aspx?Title=Arup&Title=Ratan
But it always return those items whose "Title" value is "Arup". It is not returned any items whose "Title" is "Ratan".
I have followed the
http://office.microsoft.com/en-us/sharepointserver/HA102509991033.aspx#1
Please suggest me.
Thanks | Arup
THanks! Arup R(MCTS)
SucCeSS DoEs NOT MatTer.

Hi DH, sorry for not being clear.
It works when I create the connection from that web part that you want to be connected with the Query String Filter Web part. So let's say you created a web part page. Then you could connect a parameterized Excel Workbook to an Excel Web Access Web Part
(or a Performance Point Dashboard etc.) and you insert it into your page and add
a Query String Filter Web Part . Then you can connect them by editing the Query String Filter Web Part but also by editing the Excel Web Access Web Part. And only when I created from the latter it worked
with multiple values for one parameter. If you have any more questions let me know. See you, Ingo

Open doc URL: unable to open the report in same window

Hi
I'm trying to open a report using open doc url with "swindow=same" but still it opens in a separate window. This happens only when I use JAVA viewer. it works fine in ActiveX and HTML but I want this in JAVA viewer as i'm including this page in my JAVA application and it should open the report in the same window. I tried using "<a>URL</a>" and also target="_self" by HTML interpretation for that object but still the same problem. I'm unable to open the report in the same window by using JAVA viewer for Crystal Reports in info view. Please help me!!!
Envirorment Details: Crystal Reports 2008 SP3, BOE XI R3 SP3
regards
Raghavendra.G

I have tested that myself and It seems that HTML interpretation does not work with the Java viewer.
I have also tried using a hyperlink containing javascript
eg.
javascript:window.location.href='http://www.sap.com'
but the java viewer seems always to launch a new window before processing the command.
I would recommend to open a case by SAP support ( httP://service.sap.com/support )
Regards,
Stratos

I try to open docs off the web (ie: floorplans) and I get error message stating I need to accept End User Lic Agreement.How can I resolve this?

I try to open docs off the web (ie: floorplans) and I get error message stating I need to accept End User Lic Agreement.How can I resolve this?

/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app
*Note, the ".app" file extension for the application is usually hidden from users view.

Open doc url question

Hi,
I have a requirement wherein I need to access some reports using the URL.
I need to test the reports which open through a url as it needs to get embedded to the intranet.
When I run the below url thorugh the browser I get the following error
http://dev1/businessobjects/enterprise115/InfoView/scripts/opendocument.aspx?sType=wid&sDocName=fru%loop%report
An erorr has occured. Not a valid query
Please let me know on this.
Thank You,

Are you able to open and refresh the report in the InfoView?
Do you have multiple reports with the same name in your BO repository?
Regards,
Stratos

Trial question: Can't open .doc files from web page

I'm using Dreamweaver on a Mac, and I have a link on a page
that should bring up a doc file. When I preview the page in Safari,
it brings up a directory listing which highlights the file so that
you can double-click and open the file. (Of course, I'd love for it
to go ahead and open the file, but my understanding is that
Dreamweaver Mac doesn't support that.) However, when I preview in
Internet Explorer, I either get a message that the File is Not
Found or it just spins and never brings up anything. The file is in
the root directory of my site (same directory as my index.html.
Any ideas?
Thanks!
Kim

Do you have Word installed on your Mac? If you don't, it
won't open.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"kshorb" <[email protected]> wrote in
message
news:eenckl$h3a$[email protected]..
>I used code similar to that below, but the .doc file
never opened in IE. I
>did
> find, however, if I link to a .pdf it works just fine.
So I just went
> ahead
> and converted my .doc to a .pdf and changed the href.
Maybe it's
> something
> specific to my computer... Thanks.
>
> <a href="yourdoc.doc">Click here to open Word Doc
> </a>
>

Open Doc Function to pass parameters from Xcelsius to WEBI

Hi All,
I need to have a drill through functionality from xcelsius report to WebI report I am using the following open doc URL
http://BO ServerName/OpenDocument/opendoc/openDocument.jsp?
sType=wid&sRefresh=Y&sIDType=CUID&iDocID="Doc ID"&mode=full&lsSRegion=""&lsSDay=""&lsSPlant=""&lsSProduct%20Name=""
When I run the flash in Internet Explorer then the drill through webi report opens without any error for the 1st time
but when I try to reopen the report again with new set of parameters , the browser gets hanged
Also when I run the flash in Firefox , I get error while opening the Webi Report for the 1st time but when I try to open the report again it works fine.
Please let me know if anyone has faced similar issue before.
I am Using Xcelsius 2008 SP3 and BO XI 3.1
Thanks,
Shweta

Hi Shweta
If you place the URL un the browser directly does the report open and refresh ok? Can you try altering the parameters of the URL, also directly in the browser?
Something else to check would be if the prompts in the WebI report can be optional, store the last value etc, and I wouldn't recommend having a prompt which has a space in the name such as you have (Product%20Name). Keep the prompts as simple as possible, and make sure that the 'equal to' and 'in list' operators are properly reflected in the URL.
Regards
Charles

Open new URL in same window

Hi all,
I am using "linktourl" element for open a new url page.
This is done by reference property(opens in new window).
My need is to open the New URL in same window instead
of new......
Anyone can help me plz and send the codings.....

I think this is double posting.....please close one thread
[link|open new URL page in same window;

How to open new window webi report using open doc?

Hi All,
i have created URL using open doc in Bi 4.0 .please find the below my code.
http://fcvws975/BOE/OpenDocument/opendoc/openDocument.jsp?iDocID=AeX5DoctKBhGv1AiV2oibxU&sIDType=CUID&sType=BI
workspace&sRefresh=Y" title="" target="_blank" nav="doc"></a>
When i click on this hyper link it is opening in the same page not in new window but i want to see report in new separate window.
Can any one please help .
Thank you,
Regards,
Venkat

Hi,
In BI4.1 SP03, there are couple openDocument fixes related to workspace.
ADAPT01700442
Description:
When using an Opendocument URL to open a BI workspace, a timeout error occurs resulting in an HTTP 500 error
message that reads: "Your session has expired".
New Behavior:
This problem is resolved.
ADAPT01711393
Description:
In Internet Explorer 8, if you attempt to view an Analysis workspace embedded in the SAP NetWeaver Portal using
OpenDocument, the workspace will fail to load.
New Behavior:
This problem is resolved.
What version of BI4.0 do you have?
If the fixes above are related to your openDocument workspace issue, I'd suggest you to test it on a BI4.1 SP03 sandbox.
Hope this helps,
Jin-Chong

Passing hierachy node variable from BW to BO Webi Report in open doc link

Hello All,
We are working on BW-BO integration and creating Webi reports based on Bex queries.
The question is regarding passing of a hierachy node value from BW to BO through open doc link.
I see that when we pass hierarchy node value, we have to associate that with the corresponding infoobject technical name in the link but not sure in what format it has to be sent.
For example, if ARM is the node value and 0HIERNODE is the infoobject , how should we send this value to BO.
Please help.
Thanks for your help,
Regards,
Tangudu S

You cannot change anything here. You should really find out how the values are retrieved from the database
THere is another option:
1) Activate the tracing on your BOBJ server
Check the following SAP notes (http://service.sap.com/notes) for that:
Unix: Note 1235111
Windows: Note 1260004
2) Run your WebI report from the InfoView by choosing first the desired hierachy node value from the LOV of your prompt.
3) Extract the MDX statement from the log file. It should contain the value for the hierarchy node. Copy this to the URL
It is easier to find this out if you have access to a Crystal Reports Designer installation. Do you?
Regards,
Stratos

If I open another URL from my homepage, the "go back one page" button is grayed out so I can't get back to my home page.

This problem only started recently.
Opening another web page (URL) from my homepage always opens in the same tab and the "go back one page" button is gray and does not work. If I open a series of web pages in the same tab the green "back" button is green. Clicking on the "recent pages" down arrow will allow me to go back, but only to the page after the home page.
In other words, after browsing, I can get back to the opening page (my home page) only by clicking on the house icon but not by using the "recent pages" function.
Is there an option that changed after the last update?

Do you see any tab history if you right click the Back or Forward button?
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

How to catch URL parameter from Portal URL in Web Dynpro iView

Hi All,
I have a web dynpro application running as a portal iView successfully. Now the client wants to make it internationalized with 7 languages. Currently they access the portal - and via role assignment they get to the portal tab with the wd iView. Now they want to send a parameter for the language key with the portal URL. So when they are typing in http://myportal.mydomain.com now they want to type in http://myportal.mydomain.com?sap-locale=de or so. My question is how can I catch this parameter in the WD application when it is running inside a portal iView? Is it at all possible?
I have written a very small application which is trying to catch a URL parameter named PARAM. The code I have written is the default one as below:
String paramValue = WDWebContextAdapter.getWebContextAdapter().getRequestParameter("PARAM");
When I run the application standalone and add the PARAM=something in last of the URL I can catch it. But when I create an iView and while previewing it I add the same PARAM value it is coming as null all the time. Same when I add this iView to a role and show it via role assignment in protal. Please help to let me know how to achieve this. I think if I can read the parameter value from Portal URL in the WD iView - then I can set it as the default locale of the application and then show language specific file to achieve internationalization.
Your urgent help will be highly appreciated.
Warm Regards,
Shubho

Hi Shubhadip
Even if you get the parameters, how do you internationalize your application? Are you not following the standard way as described in the following link. In this case you never need to capture any such parameter. This is done by the WD runtime automatically .
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/f4/d95664da179b4db731e21c2e470b72/frameset.htm">Internationalization of WD projects</a>
You can retrieve application parameters specified at the creation of iview by "adding parameters(with the same name as in iview application parameters) to the default plug of the Component Interface View of the WD application". "onDefaultPlug" method of the interface view controller you get these values as parameters, which you can save in the context node of component controller for later use.This is guaranteed to work.
But again this is not what you want exactly. You want the user to specify the value at runtime. If you have just 7 languages, you can create 7 set of iviews with different application parameter value indicating language key, and assign to 7 different set of roles, each representing one set of users with common language.
I hope you find a solution.
Regards
kk

One parameter in open-doc url in webi not required

Similar Messages

Maybe you are looking for