One Photoshop and Multiple Licenses?
I want to purchase one Photoshop program but with additional licenses for other people to use on their computers. Does anyone know how much each additional license would cost?
Also could the licenses be used on Macs and PCs?
Thanks!!
- Allen
Right, so your IDP will have a single certificate which will be single-instanced on the SharePoint farm. Steve's article is accurate for SharePoint 2013 and I've used this method with ADFS. It should be no different, on the SharePoint side, with other IDPs.
WAC is beyond SAML. The S2S/JWTs take care of it.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Similar Messages
-
Photoshop and illustrator license
Hello, my laptop was stolen ...
Photoshop and Illustrator were installed on this one ...
How do I get them on my new computer knowing that I spend a Mac to a Windows computer?
Thank you in advance for your answer.
Best Regards.Hi Nicolas,
If you own PS and Ai CS6 on Mac but want to switch to Windows you'll want to contact our customer support for assistance.
http://bit.ly/AdobeLiveChat
- Dave -
Dear all,
I have a input that looks like this:
HeaderKeySomeHeaderInformationItemKeySomeItemInformationItemKeySomeItemInformation...
Here's the actual input
TEHGMESS0026000000288S0001TEI2____026200006112410400000000 18010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000JTEI2____026200006112410400000000 19010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
HeaderKey = TEHGMESS
ItemKey = TEI2____
Is it possible to process this via MessageTransformBean (my actual scenario is JMS to IDoc)? I already tried but I only succeeded when having new lines in my input to separate between Header and (multiple) Items.
So when the input and my configuration looks like below it works, but when I only have a single row input it doesn't work, even when specifying xml.recordHeader.endSeparator = '0' / xml.recordItem.endSeparator = '0'. I even tried xml.endSeparator = '0' but no luck.
Input that works
TEHGMESS0026000000288S0001
TEI2____026200006112410400000000 18010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
TEI2____026200006112410400000000 19010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
Matching configuration that works for input which structures are delimited by new line.
Paramentername
Parametervalue
Transform.Class
com.sap.aii.messaging.adapter.Conversion
Transform.ContentType
text/xml;charset=utf-8
xml.conversionType
StructPlain2XML
xml.documentName
MT_TEI2Split
xml.documentNamespace
http://hansgrohe.com/pi/MQ/TEI2/10
xml.keyFieldName
SATZARTKey
xml.keyFieldType
CaseSensitiveString
xml.processFieldNames
fromConfiguration
xml.recordHeader.fieldFixedLengths
8,4,9,1,4
xml.recordHeader.fieldNames
SATZARTKey,SATZLENHG,NUTZLEN,MESSAE,MESSNR
xml.recordHeader.keyFieldValue
TEHGMESS
xml.recordItem.fieldFixedLengths
8,4,2,10,8,19,3,3,2,10,6,2,10,6,2,10,6,6,6,6,6,11,9,2,10,6,2,10,6,3,4,3,7,14,8,1,31
xml.recordItem.fieldNames
SATZARTKey,SATZLEN,BUCHART,TRNR,ANDGNR,MITEM,TEIVARI,BSTSTATU,REFTYP,ORNO,POS,REFTYP1,ORNO1,POS1,CHATYP,CHARGE,CHAPOS,ABBVONL,ABBNACH,ZUBVONL,ZUBNACH,I2MENG,I2BUNR,REFTYPN,ORNON,POSN,REFTYP1N,ORNO1N,POS1N,BSTSTATN,ABUSERAB,ABUSERFN,ABUSERNA,I2TIME,I2LIDNR,I2FMCODE,FILLER
xml.recordItem.keyFieldValue
TEI2____
xml.recordsetName
records
xml.recordsetStructure
recordHeader,1,recordItem,*
Any clues on this? Is it even possible to have multiple structures in one row? Many thanks in advance
JensSAP came back to me with this answer:
First, I would like to point the documentation for Message Transform
Bean (MTB) in 7.4:
http://help.sap.com/saphelp_nw74/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm?frameset=/en/57/0b2c4142aef623e10000000a155106/frameset.htm¤t_toc=/en/45/0ea2de423c2d6be10000000a11466f/plain.htm&node_id=18
As it is written at the beginning of this document, MTB is used to
call classes written for the Plain Adapter Engine. So you may find
additional documentation about the parameters for convertion in the
documentation of the Plain Adapter Engine
(http://help.sap.com/saphelp_nw74/helpdata/en/0d/00453c91f37151e10000000a11402f/content.htm?frameset=/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm¤t_toc=/en/75/246b3de666930fe10000000a114084/plain.htm&node_id=11).There it is written that the structures by default are
arranged line-by-line. The endSeparator just adds additional character
string as a separator after the last column in a row.
I hope that this answers your question. MTB expects the data to be
structured line by line.
You may add a custom module, which transforms the message in the
expected format.
If you have a look at the second link there's even a more precise wording that multiple structures within one line are not supported:
xml.NameA.endSeparator
Even if no specification is made here, a line break must follow since substructures are always expected as a line of the document.
Bottom line is that it's not supported by now and verfied by me with PI 7.4 SP5
Many thanks to Ambrish, Amit and Hareesh for the valuable input. Will probably try to work things out for now following Ambrish's / Hareesh's suggestion as this seems easier to implement. Amit's proposal with a dedicated module however would probably be the more polished solution.
Cheers
Jens -
ALV for one header and multiple item table
Hello All,
I have a requirement to display records from one header and three item table using ALV.
The output should be such that
1-line - record from header table
followed by - records from the 1st item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
followed by - records from 2nd item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
followed by - record from 3rd item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
Can you help me out.
Thanks and regards,
Subramanian.hi
data population is same for alv or normal reporting.
First you select the data from header
select from item data using for all entries in it_header where....
select item 2
selct item 3
loop a it_header
read item1
read item2
read item3
check sy-subrc
move to i_final
then build fieldcatalog and display..
look the example
SELECT PERNR
STELL
WERKS
ABKRS
ENAME
ENDDA
BEGDA
ORGEH
PERSG
PERSK
KOSTL
FROM PA0001
INTO TABLE I_PA0001
WHERE PERNR IN S_PERNR
AND ABKRS IN S_ABKRS
AND PERSG IN S_PERSG.
SELECT SPRSL
STELL
ENDDA
STLTX
FROM T513S
INTO TABLE I_T513S
FOR ALL ENTRIES IN I_PA0001
WHERE STELL = I_PA0001-STELL AND SPRSL = 'EN'.
SELECT PERSA
NAME1
FROM T500P
INTO TABLE I_T500P
FOR ALL ENTRIES IN I_PA0001
WHERE PERSA EQ I_PA0001-WERKS.
LOOP AT I_PA0001 .
READ TABLE I_T513S INTO WA_T513S WITH KEY STELL = WA_PA0001-STELL
SPRSL = 'EN'
ENDDA = WA_PA0001-ENDDA.
IF SY-SUBRC IS INITIAL.
MOVE WA_T513S-STLTX TO WA_FINAL-STLTX.
ENDIF.
V_SNO = V_SNO + 1.
Read Value For Personal area Text.
READ TABLE I_T500P INTO WA_T500P WITH KEY
PERSA = WA_PA0001-WERKS.
IF SY-SUBRC EQ 0.
MOVE WA_T500P-NAME1 TO WA_FINAL-NAME1.
ENDIF.
FORM DISPLAY_DATA .
--BUILDING FIELD CATALOG--
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = V_REPID
I_INTERNAL_TABNAME = 'I_FINAL'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = V_REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = I_FCAT[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*--Modifying titles of Field Catalog--
READ TABLE I_FCAT INTO WA_FCAT WITH KEY FIELDNAME = 'S_NO'.
IF SY-SUBRC EQ 0.
WA_FCAT-REPTEXT_DDIC = 'X'.
WA_FCAT-SELTEXT_S = TEXT-041.
WA_FCAT-SELTEXT_M = TEXT-041.
WA_FCAT-SELTEXT_L = TEXT-041.
WA_FCAT-OUTPUTLEN = 3.
WA_FCAT-JUST = 'L'.
MODIFY I_FCAT FROM WA_FCAT INDEX SY-TABIX.
CLEAR WA_FCAT.
ENDIF.
do for all the fields u want to display..
Award points if useful. -
One IDP and multiple web applications
Continuing to look at the configuration necessary to enable SAML on my 2013 farm, I have two web apps which i would like to have SAML running on, both leveraging the same 3rd party IDP for authentication. As I dug into the various stages of configuration
there is a part that establishes the SharePoint site realm identifier...researching what this is for, i found an article by Steve Peschka (http://blogs.technet.com/b/speschka/archive/2010/04/27/how-to-create-multiple-claims-auth-web-apps-in-a-single-sharepoint-2010-farm.aspx)
in it he talks about if you have one IDP but multiple web apps that must use that IDP.
Am i correct in understanding that when steve mentioned "You can only associate a token-signing certificate from an STS with one SPTrustedIdentityTokenIssuer." That the TS cert I import from my IDP is unique and is only able to be linked to one
Web Application...unless i create a URI that makes Sharepoint aware of the additional web app?
Going further...I can't just import another copy of the TS cert and set it to another name unique from the first one?, once this is done i could then create a new unique realm for that additional web app with that other cert. Then when configuring the web
apps it would list two IDP's for me to choose from and i would assign them individually to on or the other.
His article covered 2010 not sure how 2013 works with this stuff...new territory for me here so forgive my lack of knowledge on how this all comes together.
Also, is there some sort of configuration necessary for Office web apps farm to work with SAML or is that handled through S2S communication and is beyond SAML?Right, so your IDP will have a single certificate which will be single-instanced on the SharePoint farm. Steve's article is accurate for SharePoint 2013 and I've used this method with ADFS. It should be no different, on the SharePoint side, with other IDPs.
WAC is beyond SAML. The S2S/JWTs take care of it.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
I have one computer with a logon for Kids and one for Adults. There is a touch and nano that was added to a single itunes account tied to my email on the adult logon and the shuffle that is on the kids account. I can't seem to get the multiple devices access to all the songs with out erase and re-sync error message when not using the right device on the assigned logon to the computer - why and can we change this?
It sounds like each Windows user has it's own iTunesLibrary.itl file. If that is the case, then you are correct, the correct device must be connected when logged in with the correct login.
If all Windows logins share an iTunesLibrary.itl file... then it does not matter which login is used or which device is connected. -
Can I use multiple IDs for one iTunes and multiple devices
We have one family computer with iTunes, my older brother has an iPhone and I have an iPhone. A family ID was previously used to purchase songs for the family to share. My older brother has created an apple ID for his iPhone, and l have a yet unused apple ID. my brother downloaded songs etc onto the family iTunes that I would like to share, there are songs on the family apple ID that we would both like. Can you download purchases from multiple apple IDs into one iTunes account, then sync that data onto multiple phones that each have a separate ID? Is iTunes linked to one ID? Can purchases from multiple IDs be grouped together in our family account. Also do I Actually need a separate Apple for my iPhone to prevent private messages and contacts being shared?
Thanks for any adviceI forgot to add my iPhone is brand new and unused, and also that the iTunes account has non purchased songs on there. Can these be shared. As it is a new computer the purchases from the family ID have not been downloaded yet
-
One installer and multiple users
I copied the Lion installer to a flash drive and I have a few different users at work that I want to upgrade. Can they buy Lion in the app store and then stop the download and use my copied installer to install Lion? Will there be any conflicts with future updates?
The problem is that one transaction is linked to one user (on license), and a gblink will have the transaction id (orderid) inside of it. I remember we were playing with a 'free' transaction type before I left, but I'm not if that got into 4.1 or not.
The easier solution is to not send a gblink URL to the users, but to send a link to a service on your server that responds with HTTP 302 (or 303) redirect to gblink URL that the service computes with a brand new transaction id. -
OWB10gR2 : One Repository and Multiple Enviroments(Dev , QA and Prod)
Hi All,
In 10gR1 , Runtime repository and Design repository used to be 2 different schemas. Because of this , we can simply have one repository in development and deploy the mappings into QA and Prod.
In R2 , runtime and design objects are present in a single repository. Do we need to install separate repository for each of the environments(Dev, QA and Prod) or is there a way to manage multiple envs without multiple repositories?
Thanks in Advance
MalleeHello Malle,
We are in a similar situation so our setub looks something like this.
We have a database which serves the purpose of design repository. Let's call it owbdev.
We have three target databases (data warehouse). Let's call them whdev, whqa, whprd.
In the db owbdev we configured an owb user (as owner of the repository) and various other users (as developers).
In whdev, whqa and whprd we did the same configuration except this time, we called the repository owner in each of these target databases, owbrun. This will be what we call in R2 our control center.
Then we deploy from owbdev to any of the three targets after having setup the appropriate locations and control center configurations in owbdev.
If there is a better way to do things I'm open to any and all suggestions.
Mike -
One JAVA and multiple ABAP Instances
Hello All,
Till now i have done configurations for Billerdirect on one Java instance and one ABAP instance.
Now my situation in production we have multiple ABAP (1 CI + 4 Dialog) and only one production Java instance.
So in XCM configuration using method group_connect i have created XCM configuration this is working fine.
so here is our problem after doing this .
For self user Registration we have created JCO_RFC_Server in XCM this configuration is working only in one situation.
Since JCO_RFC_SERVER can be created only for one instance when ever self user registration goes to other instance it fails , which is happening frequently
Can anyone please help me understand in creating XCM configuration for multiple ABAP instances so that i can create multiple JCo_RFC servers.
Over View:
From one Java instance i want to establish multiple connection to ABAP (CI + DI) so that i can create one JCO_RFC server for each connection.
When i want to access system i will access using XCM connection name at the end.
eg some thing like this.
http://myserver:53000/bd/public/frameset_top_html.jsp?SYS=MYSYS1
http://myserver:53000/bd/public/frameset_top_html.jsp?SYS=MYSYS2
Please help in moving forward.
Thanks in advance.
Regards,
Vardhan.Hello All,
Could you please help me in getting to an logical solution on this approach .
Thanks,
Vardhan. -
One Executable and multiple computers
I would like to confirm my understanding on this topic -
Assuming I have one LV executable stored on a network location, and 6 PC's accessing that single EXE file -
Is is correct the each PC loads that exe into it's internal memory, and as such, there is likely not an issue with
X number of PC's accessing the same exe file ?
Someone keeps trying to press the issue that comm errors are a result of 'too much demand' on the network EXE file.
(The comm errors are due to RS232 limitations, in my mind, but I'd like to be sure I'm correct in my understanding).
Thanks,Hi,
Thank you both for the replies.
I certainly had thought about loading the software on the individual machines, however it was set up as I described before I started working
at my facility and it involves medical devices - which means validation of the most minute change.
As the end of the year approaches, it's unlikely I can slow down production to prove a point.
I wanted to verify my assumptions were correct before I pushed the issue.
Thanks ! -
PlotSeries (One serie and multiple itemRenderer)
Hi all,
I'm working in charts, concretely with a PlotChart.
Its code:
<mx:PlotChart id="plot" width="100%" height="100%"
dataProvider="{chartList.arrRouting}"
showDataTips="true">
<mx:horizontalAxis>
<!--<mx:CategoryAxis categoryField="time"/>-->
<mx:DateTimeAxis alignLabelsToUnits="true" dataInterval="2"
dataUnits="hours" parseFunction="myParseFunction"/>
</mx:horizontalAxis>
<mx:verticalAxis>
<mx:CategoryAxis dataProvider="{chartList.arrcoll2}"/>
</mx:verticalAxis>
<mx:series>
<mx:PlotSeries id="pSeries" xField="time" yField="node"
fillFunction="myFillFunction"/>
</mx:series>
</mx:PlotChart>
DataProvider is an array like this: [event:'NodeConnected', time:'23:53', node:'A']
[event:'NodeDisconnected', time:'02:53', node:'A']
[event:'RemoveRouteTo', time:'01:53', node:'B'];
[event:'NewRouteTo', time:'23:53', node:'C']............................
And I use a fill function:
private function myFillFunction(element:ChartItem, index:Number):IFill{
var c:SolidColor = new SolidColor(0x00CC00);
var item:PlotSeriesItem = PlotSeriesItem(element);
if (item.item.event == 'NewRouteTo'){
c.color =0x01DFD7;
return c;
if (item.item.event == 'RemoveRoute'){
c.color = 0xF7FE2E;
return c;
if (item.item.event == 'NodeConnected'){
return c;
}else {
c.color = 0xFF0000;
return c;
Then, I want to change the itemRenderer (icon) acorrding to param Event. As I have only one serie all items are with a circle (default Item Renderer),
I try to put in myFillFunction the next code: pSeries.setStyle("itemRenderer", new ClassFactory(mx.charts.rendereres.CrossItemRenderer)); but doesnt work.
Is it possible to do that?
Thanks in advance,Hi,
if you set itemRenderer for series, all items will be rendered using this class.
If you want to have different pictures for items in one series you should create your own itemRenderer and change the symbol accoding data.
For example,
public class MyCoolItemRenderer extends ProgrammaticSkin implements IDataRenderer
... // do something
override protected function updateDisplayList(unscaledWidth:Number,
unscaledHeight:Number):void
super.updateDisplayList(unscaledWidth, unscaledHeight);
var stroke:Stroke = getStyle("stroke");
var g:Graphics = graphics;
g.clear();
g.lineStyle(stroke.weight, stroke.color, stroke.alpha);
switch (data.event)
case "NewRouteTo":
g.drawCicle(0, 0, unscaledWidth); // just an example. You can show the way of rendering items in SDK source
break;
g.endFill(); -
[Solved]Unzip as makedepends and multiple licenses
Hello,
I'm creating a package for the Entypo font. I was hoping someone could help me with some doubts I have.
1. The source file is a zip archive. Does that mean that I should add unzip as a makedepends? I see some packages do and some don't, so I'm not sure.
2. I included a license file in the package because the OFL license isn't in licenses.
cd $srcdir/../
Is this the right way to access the root directory of the package(where I put the license file)?
3. The font contains some logos like Github's and Facebook's. They have different license and/or trademarks. They also aren't included in the source file. Should they be included in the PKGBUILD?
Thanks for your time,
Steef
PKGBUILD(builds and installs fine)
pkgname=otf-entypo
pkgver=2.0
pkgrel=1
pkgdesc="A font set of 250+ carefully crafted pictograms."
arch=('any')
url="http://www.entypo.com"
license=('custom:OFL')
depends=('fontconfig' 'xorg-fonts-encodings' 'xorg-font-utils')
makedepends=('unzip')
install=entypo.install
source=("http://dl.dropbox.com/u/4339492/Entypo.zip")
package() {
mkdir -p "$pkgdir/usr/share/licenses/$pkgname/"
cd $srcdir/../
install -m644 license.txt "$pkgdir/usr/share/licenses/$pkgname/"
cd "$srcdir/Entypo/Desktop typeface/"
mkdir -p "$pkgdir"/usr/share/fonts/OTF
install -m644 *.otf "$pkgdir"/usr/share/fonts/OTF/
md5sums=("c8d3934d41066a470c444f3236133203")
entypo.install
post_install() {
echo -n "Updating font cache... "
fc-cache -f > /dev/null
mkfontscale /usr/share/fonts/OTF
mkfontdir /usr/share/fonts/OTF
echo "done."
post_upgrade() {
post_install $1
post_remove() {
post_install $1
EDIT: Entypo's website seems down at the moment. It didn't really contain any useful information but here's a page at openfontlibrary.org for reference.
Last edited by Steef435 (2013-08-30 11:16:08)Thanks a lot for all the responses,
@Xyne, HalosGhost Thanks, works like a charm now.
Regarding the license, I'll include the section from the website and the OFL as suggested by Progandy, thanks! I won't include the CC-BY-SA because it's in licenses, so I added it to the licenses array.
It all works great now, I'll upload it to the AUR. Thanks again for the help!
My final PKGBUILD:
# Mantainer: steef435 <[email protected]>
pkgname=otf-entypo
pkgver=2.0
pkgrel=1
pkgdesc="A font set of 250+ carefully crafted pictograms."
arch=('any')
url="http://www.entypo.com"
license=('CCPL:by-sa'
'custom')
depends=('fontconfig' 'xorg-fonts-encodings' 'xorg-font-utils')
install=entypo.install
source=("http://dl.dropbox.com/u/4339492/Entypo.zip"
"license.txt"
"OFL.txt")
md5sums=("c8d3934d41066a470c444f3236133203"
"69e35cdba6c562199177104127137377"
"60aa5b02420a96f0fb1e19f8690e94f3")
package() {
install -dm755 "$pkgdir/usr/share/licenses/$pkgname"
install -m644 -t "$pkgdir/usr/share/licenses/$pkgname" $srcdir/license.txt $srcdir/OFL.txt
install -dm755 "$pkgdir/usr/share/fonts/OTF"
cd "$srcdir/Entypo/Desktop typeface/"
install -m644 -t "$pkgdir/usr/share/fonts/OTF" *.otf -
One computer, One iPhone, and multiple calendars?
I have multiple calendars in Outlook 2007. Unlike many posters, I have no problems syncing the "default" calendar. However, I have another calendar that I want to sync too. In iTunes, the only option I have is "sync all calendars" and it doesn't even list any to choose from. But, only my default calendar will sync. I've tried reloading iTunes, resetting the sync history, and I already have the updates for Outlook 2007. Anyone?
According to this article, it appears that selected calendars are only available from OS X.
http://support.apple.com/kb/HT1386?viewlocale=en_US
CG -
By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.
A Cloud subscription provides for installing working installations on two machines. You can have mixed operating systems (both Windows and Apple's OX).
Maybe you are looking for
-
Not supported features - Nokia Lumia 525
SLEEPING NOKIA AND WINDOWS DEVELOPER??? 1. In any browser mail did attach any file(doc,pdf in memory card..) 2. No pen drive connect and projector connect 3. No printer connect 4. Very worst office hub compare to king office soft in android 5. No mem
-
Can you route documents in Adobe Reader?
I need help in routing a document in Adobe Reader if thats possible?
-
Download of multiple documents from Solution Manager
Is there a way to download multiple documents from Solution Manager SOLAR01 project documentation tabs from multiple nodes rather than going one by one?
-
1) Why initialization of the sequence with NEXTVAL is required? when we create a sequence Before we use CURRVAL for a sequence in our session, we must first initialize the sequence with NEXTVAL otherwise it will give an error as 'ORA-08002: sequence
-
How to close all files that an Applescript has opened?
I'm writing a script with multiple "open for access file ... with write permission" commands. It writes to various of them, making csv databases as it works its way through analyzing an xml file (generated by other software), then closes them all at