One PR for Network Components

Hi
Our client has one reqt ,When network is released in Project System, Single PR is created for one item whereas we want to club all items in one PR.
Pl help me
Thanks
Prasad

SPRO -Project System – Structures - Operative Structures – Network - Settings for Networks - Specify Parameters for Network Type
Here you will get one indicator for collective PR per order.
You have to select for one PR for all materials.
Hope it will help you.
Regards,
Manish

Similar Messages

  • Have pc with 2 nic cards. One is for network and the other is for testing hardware communication.

    As the unit communicates with test software it generate data output that needs to go back to pc hard drive then the program copies the program over the other nic to a server shared folder.
    But as of recently if test unti is off then the network is fine and see all mapped drives.
    But once I turn on the test unit then the mapping is gone and will not be able to map drives at all.
    Must then turn off test unit then reboot to get mappings back.
    What has happend?  Why does this now happen after visiting windows update?   It makes testing the hardware impossible.

    Hi,
    It maybe something causes the mapping drives lost, you can use net use command to map your drives with persistent parameter.
    If this doesn’t work, I would recommend  to use process monitor to check what’s happened during your operation.
    Alex Zhao
    TechNet Community Support

  • 8.1.6 Patches for Network Components

    I am looking for a link to Oracle 8.1.6 patches (if any ) to support various other ENM products like Nerve Center, Netcool etc.
    Please respond ASAP.
    Thanks

    Unfortunately, I don't think you will find this on any Oracle sites since the product is desupported.
    OTN

  • An error while extracting one of the network connect components

    I was able to connect to my employer VPN ( Juniper) from Macbookpro Maverick.
    After upgrading to Yosimite, I am getting this error. I tried with both Safari and Firefox.

    retrana wrote:
    I made sure the keystore password was set to changeit using the following:
    sudo keytool -storepasswd -new changeit -keystore /System/Library/Frameworks/JavaVM.framework/Resources/Deploy.bundle/Contents/Home/lib/security/cacerts -storepass changeme
    However, I continue to see "An error occurred while extracting one of the Network Connect components."
    Just a guess, but that looks to be the location for Apple Java 6, which is not replaced when you upgraded to Java 7, rather Oracle stores it in a different location.
    It's also possible that Juniper has not updated their software for Java 7.  I know that's true for at least one other VPN vendor.

  • How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?

    How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?
    I am changing the set up of my home computer to add another computer.
    I would like to go wireless from my computers to the hub and wired from the hub to my
    printer. I do not think this printer can do that since it does not have the ports to connect to a router hub, I think.
    I am rather new to this way of setting up, so any help would be nice.

    You could get a wireless router that supports USB printers, but these only support printing, not scanning.  You could just go buy a new wireless printer since your printer is pretty old, anyway.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Xilinx wins Light Reading's Leading Lights Award for Outstanding Components Vendor to the Network and Comms industry

    Light Reading, a leading online publication for the network and communications industry, has just presented Xilinx with a 2015 Leading Lights award for Outstanding Components Vendor at an awards dinner held in Chicago on June 8 in conjunction with this week’s Big Telecom Event.
    There’s a very big reason that explains why Xilinx won this award.
    Equipped with the right IP and software, Xilinx All Programmable FPGAs and SoCs can implement single-chip systems, replacing ASSPs and ASICs entirely. This capability is critical in leading-edge applications where shipping volumes have not yet become—and may never become—sufficiently large to attract the ASSP vendors or to justify the NRE associated with cutting-edge, nanometer ASIC development.
    This is precisely the current situation for networking products that implement 100G and 400G Ethernet and other equally high-speed networking protocols including OTN.
    Quite simply, there is no better way to implement these products—especially with the introduction of the latest Xilinx 20nm UltraScale and 16nm UltraScale+ devices.
    The impact of the Xilinx All Programmable device portfolio on the development of Smarter Networks based on next-generation networking and communications systems is most visible in emerging applications including SDN and NFV, data-center compute acceleration, storage, and high-speed wired communications including Nx100G Ethernet and >400G OTN, 4G and pre-5G wireless radios, and wireless backhaul. Xilinx’s innovation in this space is apparent: Xilinx is the only company delivering a single-chip solution for 500G OTN transponders and 2x100G OTN switching applications with fully validated reference designs.
    Further, Xilinx, Huawei, and Spirent have demonstrated a prototype 400G Ethernet core router, based on Xilinx's high-end FPGAs. (See “Huawei and Xilinx unveil prototype 400GE Core Router at OFC 2104. FPGAs do the heavy lifting.”) This is the first prototype system to validate 400G Ethernet technology, which is still in its pre-standards phase. When standards are in flux, as they are here, Xilinx All Programmable devices are especially useful in getting early products to market. In addition, JDSU and IXIA have announced 400G Ethernet test systems based on Xilinx technology. (See “JDSU 400G Ethernet test platform at OFC 2015 based on Xilinx 20nm UltraScale devices”, “Single-chip 100G and 400G demos at next week’s OFC 2015 highlight UltraScale FPGA and Xilinx IP networking capabilities”, and “Xilinx and Ixia present 400GE and 25GE testing solutions at OFC 2015” for more information.)
    Xilinx owns 100% of the 400G Ethernet platforms announced to date.
    The Leading Lights awards are the telecom industry's most prestigious awards program and focus on next-generation communications technologies, applications, services, and strategies. Xilinx won the 2015 Leading Lights award for Outstanding Components Vendor out of a field of seven finalists in the category.
    For more detailed information on Xilinx and Smarter Networks, see “A Generation Ahead: SMARTER NETWORKS.”
     

    Curtis,
    I believe you can assign a style sheet to a TextArea control
    using the TextArea class's "styleSheet" property (see
    http://livedocs.adobe.com/labs/flex3/langref/mx/controls/TextArea.html#styleSheet).
    Peter

  • Hi  I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail.  *entered security key/password does not match the one set for for router.  I know th

    Hi
    On my macbook pro
    I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail.
    *entered security key/password does not match the one set for for router.
    I know that the password is correct and have rechecked this by changing it a few times
    and I still get the same result.
    My network internet service provider is not interested and says to call Epson.
    Anybody have any clues how I can resolve this?
    Regards

    I personally suggest the new Drobo FS. Since it has an iTunes server built in and you can use any size sata hard drive in it it is better and a NAS that has to use the same size drives.

  • How to block one of wireless network

    Hi there,
    I have Airport Extreme with 2 wireless networks, one for my iMac and my wife’s iPad another one is for kids PCs. All of us are connected only wireless.
    Question, how shall I block the kids network my configuration, now when I block the Airport (Turn Off Airport) actually it’s only me who cannot use wireless network, all others still can do it. Purpose is to block the kids using the wireless network during the night. Now my solution is to pull out lan cable between Airport and ADSL modem.
    I believe there must be smarter way to do it, I just don’t know how. Could you please help,
    thanks

    Hello!
    Your Extreme can set time restrictions on when specific computers can access the network. You can configure them using AirPort Utility:
    Open AirPort Utility, select your Extreme in the sidebar, and press "Manual Setup." If you're asked for a password, enter it. Go to the "Access Control" tab and set "MAC Address Access Control" to "Timed Access."
    Now you can set up the time restrictions.
    To add a computer to the list, press the "+" button. You'll be presented with a dialog that will let you configure the time restrictions. You'll need to enter the device's MAC address. You'll also want to enter a description so that you'll know what device the restriction applies to.
    You can double-click the "(default)" entry to set restrictions on computers not on your list. When you're finished, press "Update" and allow your Extreme to restart.

  • What is the best product for network mapping and monitoring? I am an inexperienced user). Mac 10.9.2 laptop

    I have lots of questions, but the gist is that I want to know the best product, preferably from the app store, that I can use for network mapping mapping and monitoring.
    I want to get their mac address or other police trackable etc info so I can use my computer safely.
    I am also being cyberbullied.
    I try just using ethernet but still get intruded on, for instance, messages that "other devices are using my ip address". The only other device I own is an iPod that I keep sahut off plus wifi turned off then.
    (NOTE:  You can skip the rest of this message if you want. It regards hacking attempts etc,  a little out of the scope of discussion, perhaps).
    Also a home intrusion where computer was thoroughly hacked with router(s) set up "very very close to me," according to Apple.
    Also, hackers get into my Facebook and gmail and yahoo mail, really,  no matter what I try to do on my computer and how many times I change passwords it does no good.
    Also,  The ip addresses for google and the one in syste preferences and the one looking up my ip address on ip chicken always gets three different results.
    More worrisome it that hackers got into my Wells Fargo account a week after the intrusion even though I changed all account #'s and pw plus notified bank. They also broke into paypal using my new account numbers.
    Also, stuff like Facetime pops up on my computer without my clicking on it even though I'm using ethernet to connect. I've given up on Time Capsule because I'm told that's how the hackers hacked my computer so thoroughly duriung the intrusion.
    Thanks.

    Aubry,
    why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
    G.

  • Searching for Network / SIM card blocked - help please!!

    I have just purchased an 8700c from a reputable eBay seller from whom I have previously purchased other items.
    The 8700c was advertised as Unlocked without a SIM card.
    I have never owned a Blackberry before and am just getting familiar with it.
    When I click icon to 'Turn Wireless On' and press the Phone key then at top of screen displays "Searching for Network".
    After a minute or so displays "No Service".
    I bought the 8700c because one day my previous mobile phone did exactly the same thing.
    After an hour on my landline phone with the phone company they assured me the GSM network was functional in my area and suggested my old phone was faulty.
    Not knowing if the phone itself had just died or if fault was with the SIM card I took it to the local branch of the telco.
    One of the guys there swapped his SIM card into my phone and had same problem - hence phone faulty.
    Thinking about it later I realised that it didn't prove there wasn't also a problem with my SIM card but I thought it unlikely so decided to buy a new phone.
    Anyway, received the 8700c yesterday and have inserted my old SIM card, been reading manual, etc.
    Whilst learning how to use it I've been asked several times to enter a password.
    Assuming this was the PIN/password I had on my old phone to prevent use in case I lost the phone, I entered it and it was accepted without any error/warning.
    So I thought I was right in believing the PIN/password was stored on the SIM and not another code, maybe in some EPROM memory in the old phone - I'm not so sure now.
    Doing a Google search I've found mention of various PIN/PIN2/PUK/PUK2 codes used in mobile phones which, if not used correctly, can cause the phone to be locked permanently.
    Here's current information I've found on the 8700c:
    click icon Settings / Options / Status shows
          PIN:      {8 alphanumeric code}
          IMEI:     { 6 digits .00. 6 digits .5}      i.e 15 digits and 3 periods
    click icon Settings / Options / Advanced Options / SIM Card shows
          SIM Card: Blocked
          ID:     {20 digit number}
    click icon Phone shows
          My Number: Unknown
    click again to see list of items, scroll down to Options
    click again to see list of items headed Phone Options
    click on General Options
    the 'Show "My Number":' line has value Yes
    click icon Settings / Options / Network shows
          Network: * None *
          Network Selection Mode: Automatic
    click again to see list of items, scroll to My Preferred Network List
    click again to see one item which is GSM network associated with my old phone
    So it seems this has been found from the SIM card.
    The top left hand side of screen shows 'cingular' but I think I read somewhere that this was just the network for which the 8700c was originally issued and doesn't detemine whether the 8700c is currently locked/unlocked.
    Is 'My Number' Unknown because the SIM card is Blocked?
    Is the SIM card Blocked because I entered my old PIN password instead of the Settings / Options / Status alphanumeric code PIN or some other PIN?
    How can I determine if the 8700c is really unlocked?
    Are there some other settings/options or anything else I should do so I can get connected to the network?
    Any thoughts would be very welcome.

    I am having exactly the same problem mate. Never used a Blackberry - received mine today from eBay (Didn't include a manual) and i have been trying to configure it with no luck. I can't connect to a Network/My SIM Card is blocked/My number is unknown - Even though my SIM works perfectly in my Sony Ericsson. Have no idea what to do. Any help would be appreciated.

  • Service for network file system fails to install

    Installation of the File Service and Service for NFS in Windows 2008 R2 server fails. Following are the steps used to perform the install.
    Open Server Manager from Start> All Programs> Administrative Tools> Server Manager.
    Click on the Roles node in the left pane, and then click the
    Add Roles link.
    On the Add Roles Wizard welcome page, click Next to continue.
    From the list of roles to install, select File Services, and click
    Next to continue.
    On the Introduction to File Services page, click Next to continue.
    On the Select Role Services page, keep the File Server box checked and select
    Services for Network File System. Click Next to continue.
    On the Confirmation page, review the settings and click the Install button.
    Click Close when the wizard completes.
    ServerManager Log:
    From the ServerManager.log file under C:/Windows/Logs I can see the below.
    2272: 2013-02-12 16:13:51.479 [CBS]                       IsCacheStillGood: True.
    2272: 2013-02-12 16:14:05.534 [Provider]                  System changed since last refresh: False
    2272: 2013-02-12 16:15:45.816 [InstallationProgressPage]  Loading progress page...
    2272: 2013-02-12 16:15:45.831 [InstallationProgressPage]  Begining Sync operation...
    2272: 2013-02-12 16:15:45.842 [Sync]                     
    Sync Graph of changed nodes
    ==========
    name     : File Services
    state    : Changed
    rank     : 1
    sync tech: CBS
    guest[1] : File Server
    guest[2] : Distributed File System
    guest[3] : File Server Resource Manager
    guest[4] : Services for Network File System
    guest[5] : Single Instance Storage
    guest[6] : Windows Search Service
    guest[7] : Windows Server 2003 File Services
    guest[8] : BranchCache for network files
    provider : FileServerRoleProvider
    name     : Services for Network File System
    state    : Changed
    rank     : 2
    sync tech: CBS
    provider : FileServerRoleProvider
    name     : File Server
    state    : Changed
    rank     : 2
    sync tech: CBS
    provider : FileServerRoleProvider
    2272: 2013-02-12 16:15:45.842 [Sync]                      Calling sync provider of Services for Network File System ...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
    2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'Services for Network File System'...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
    2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'Services for Network File System'.
    2272: 2013-02-12 16:15:45.843 [Sync]                      Calling sync provider of File Server ...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'File Server', guest deleted?: False
    2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'File Server'...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'File Server', updateElement: 'CoreFileServer'
    2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'File Server'.
    2272: 2013-02-12 16:15:45.844 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure
    NFS-Administration ServerForNFS-Infrastructure CoreFileServer ' ...
    2272: 2013-02-12 16:15:46.315 [CBS]                       ...parents that will be auto-installed: '<none>'
    2272: 2013-02-12 16:15:46.316 [CBS]                       ...default children to turn-off: '<none>'
    2272: 2013-02-12 16:15:46.325 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p:
    Staged, a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.325 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to
    'InstallRequested'
    2272: 2013-02-12 16:15:46.335 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged,
    a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.336 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.345 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a:
    Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.345 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.354 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged,
    a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.354 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.363 [CBS]                       ...current state of 'CoreFileServer': p: Staged, a: Staged,
    s: UninstallRequested
    2272: 2013-02-12 16:15:46.363 [CBS]                       ...setting state of 'CoreFileServer' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.373 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
    2272: 2013-02-12 16:15:46.390 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
    2272: 2013-02-12 16:15:46.408 [CBS]                       ...'NFS-Administration' : applicability: Applicable
    2272: 2013-02-12 16:15:46.426 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
    2272: 2013-02-12 16:15:46.435 [CBS]                       ...'CoreFileServer' : applicability: Applicable
    2272: 2013-02-12 16:15:46.493 [CbsUIHandler]              Initiate:
    2272: 2013-02-12 16:15:46.494 [InstallationProgressPage]  Installing...
    2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Error: -2147021879 :
    2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Terminate:
    2272: 2013-02-12 16:15:52.035 [InstallationProgressPage]  Verifying installation...
    2272: 2013-02-12 16:15:52.049 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient
    ClientForNFS-Infrastructure NFS-Administration ServerForNFS-Infrastructure CoreFileServer '.
    Status: -2147021879 (80070bc9)
    2272: 2013-02-12 16:15:52.052 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
    2272: 2013-02-12 16:15:52.053 [FileServer]                Skipped configuration of 'File Server' because install operation failed.
    2272: 2013-02-12 16:15:52.053 [Provider]                 
    [STAT] ---- CBS Session Consolidation -----
    [STAT] For
              'Services for Network File System',
              'File Server'[STAT] installation(s) took '6.2058637' second(s) total.
    [STAT] Configuration(s) took '0.0002143' second(s) total.
    [STAT] Total time: '6.206078' second(s).
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
    is required to roll back changes made
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 255
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
    is required to roll back changes made
    2272: 2013-02-12 16:15:52.054 [InstallationProgressPage]  Sync operation completed
    2272: 2013-02-12 16:15:52.054 [InstallationProgressPage]  Performing post install/uninstall discovery...
    2272: 2013-02-12 16:15:52.056 [Provider]                  C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    2272: 2013-02-12 16:15:52.056 [CBS]                       IsCacheStillGood: False.
    2272: 2013-02-12 16:15:52.526 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    2272: 2013-02-12 16:15:59.342 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed:
    80070bc9 (-2147021879)
    2272: 2013-02-12 16:15:59.342 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    2272: 2013-02-12 16:15:59.380 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    2272: 2013-02-12 16:15:59.390 [InstallationProgressPage]  About to load finish page...
    2272: 2013-02-12 16:15:59.390 [InstallationFinishPage]    Loading finish page
    2272: 2013-02-12 16:15:59.401 [InstallationFinishPage]    Finish page loaded
    In Windows Event long I can see the following events logged:
    Event 3002, Port Map:
      Windows(R) failed a request to register RPC Port Mapper on TCP port 111.  RPC Port Mapper cannot start.
      Network File System (NFS) clients use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on remote servers.  Without RPC Port Mapper, Server for NFS
    cannot start and NFS clients cannot access files on this server.
      Verify that no other software is registered on TCP port 111, then start Server for NFS manually (which will also start RPC Port Mapper).
    Event 7000, Service Control Manager:
    The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
    A device attached to the system is not functioning.
    Event 7001, Service Control Manager:
    The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to start because of the following error:
    A device attached to the system is not functioning.
    Event 7001, Service Control Manager:
    The Server for NFS service depends on the Server for NFS Driver service which failed to start because of the following error:
    The dependency service or group failed to start.
    Based on a technet forum I have already checked and made sure there is no other service running on port 111 (command used is netstat -a -b -o).
    Dependent Service Status:
    During the installation process “Client for NFS” seems to have gone well and the service started successfully. But the “Server for NFS” failed, when checked for the status of the dependent process “portmap” service failed to start with the WIN32_EXIT_CODE
    “31 (0x1f)”. Please find below the query result.
    C:\Users\CMMAdmin>sc query rpcxdr
    SERVICE_NAME: rpcxdr
            TYPE               : 1  KERNEL_DRIVER
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>sc query msnfsflt
    SERVICE_NAME: msnfsflt
            TYPE               : 2  FILE_SYSTEM_DRIVER
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>sc query portmap
    SERVICE_NAME: portmap
            TYPE               : 1  KERNEL_DRIVER
            STATE              : 1  STOPPED
            WIN32_EXIT_CODE    : 31  (0x1f)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>
    As the EXIT CODE is 31 ( A device attached to the system is not functioning), I have checked device manager and made sure there is no yellow warning shown against any hardware device. Further I am not sure how to proceed and debug this issue.
    Please let me know if you have any suggestion on how debug this issue further.
    Thanks
    -Poopesh

    Hey,
    I had this same problem running MS Server 2008 R2 and server log is as follow:
    name     : Services for Network File System
    state    : Changed
    rank     : 2
    sync tech: CBS
    ant.     : empty
    pred.    : File Services
    provider : FileServerRoleProvider
    5676: 2014-01-14 14:08:57.474 [Sync]                      Calling sync provider of Services for Network File System ...
    5676: 2014-01-14 14:08:57.521 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
    5676: 2014-01-14 14:08:57.536 [FileServer]                Begin installation of 'Services for Network File System'...
    5676: 2014-01-14 14:08:57.536 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
    5676: 2014-01-14 14:08:57.536 [FileServer]                Installation queued for 'Services for Network File System'.
    5676: 2014-01-14 14:08:57.536 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
    ServerForNFS-Infrastructure ' ...
    5676: 2014-01-14 14:09:00.173 [CBS]                       ...parents that will be auto-installed: '<none>'
    5676: 2014-01-14 14:09:00.173 [CBS]                       ...default children to turn-off: '<none>'
    5676: 2014-01-14 14:09:00.204 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.204 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.235 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.235 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.266 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.266 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.282 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.282 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.313 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
    5676: 2014-01-14 14:09:00.360 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
    5676: 2014-01-14 14:09:00.422 [CBS]                       ...'NFS-Administration' : applicability: Applicable
    5676: 2014-01-14 14:09:00.469 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
    5676: 2014-01-14 14:09:01.624 [CbsUIHandler]              Initiate:
    5676: 2014-01-14 14:09:01.624 [InstallationProgressPage]  Installing...
    5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Error: -2147021879 :
    5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Terminate:
    5676: 2014-01-14 14:09:41.170 [InstallationProgressPage]  Verifying installation...
    5676: 2014-01-14 14:09:41.264 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
    ServerForNFS-Infrastructure '. Status: -2147021879 (80070bc9)
    5676: 2014-01-14 14:09:41.279 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
    5676: 2014-01-14 14:09:41.279 [Provider]                 
    [STAT] ---- CBS Session Consolidation -----
    [STAT] For
              'Services for Network File System'[STAT] installation(s) took '43.7368586' second(s) total.
    [STAT] Configuration(s) took '0.0062843' second(s) total.
    [STAT] Total time: '43.7431429' second(s).
    5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
    5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
    made
    5676: 2014-01-14 14:09:41.279 [InstallationProgressPage]  Sync operation completed
    5676: 2014-01-14 14:09:41.279 [InstallationProgressPage]  Performing post install/uninstall discovery...
    5676: 2014-01-14 14:09:41.295 [Provider]                  C:\windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    5676: 2014-01-14 14:09:41.295 [CBS]                       IsCacheStillGood: False.
    5676: 2014-01-14 14:09:43.900 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    5676: 2014-01-14 14:09:57.394 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
    5676: 2014-01-14 14:09:57.410 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    5676: 2014-01-14 14:09:57.488 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    5676: 2014-01-14 14:09:57.613 [InstallationProgressPage]  About to load finish page...
    5676: 2014-01-14 14:09:57.628 [InstallationFinishPage]    Loading finish page
    5676: 2014-01-14 14:09:57.644 [InstallationFinishPage]    Finish page loaded
    My solution was to run netstat -ano to identify what process was running on port TCP/UDP :111, then with the command tasklist I got PID matching with the task name. Once identified I stopped the process, rebooted and installed
    the NFS service. On top of that, before installing NFS services I disabled firewall and antivirus. It worked fine for me. I hope this will be usefull for you. By the way, don't forget to enable all process back!
    Have a good one!

  • Prevent creation of reservation for selected components on Production order

    Hello all,
    I am aware that the production order reservation creation is dependant on the order type, but is it possible to avoid the reservation creation for few components on the order ? Any techincal way? We want to issue our components to a different batch than the one reserved during the production order creation.
    Any help will be greatly apprciated.
    Thanks,
    Swetha

    Your material is get reserved for Production order as per the Order start date & Order release. What you can do is make the start date of the Production order & release it. If any other production order are already there & you can re set the ATP of that production order.
    Say there is one production order starting 2 days after & your all raw material is blocked for this production order. And the other production is having date after this now you want to give ATP from 1st order to 2nd order. For this 1st make the start date of 2nd prod order before 1st. Then Go to COMAC select both Prod Ord & GO ATP with check reset ATP. You see that ATP is passed from 1st Prd order tp 2nd.
    Regards
    Abhijit Gautam

  • Planning of Dependent Requirements for BOM Components in Make to Order scen

    Hi Friends - I want to execute a full cycle Make to Stock Scenario with Materials planning using MRP.
    The scenario will include BOM Components with Routing.
    The process flow I want to execute -
    1. Create a Sales Order for a Finished Product (Product should have a BOM for Production)
    2. Do the product Materials Planning for the Sales Order through MD50
    3. Get all the dependent material requirements (both for products as Planned Order and also for BOM Components - all the BOM components should also be planned)
    4. Convert Planned Order for Product to Production Order
    5. Convert Planned Orders for BOM components to Purchase Requisition
    6. Confirm Production Order
    To execute this I have done the following
    1. I have created a Material Master data for Finished Product (FERT).
    2. I have assigned Item Category Group - NORM, and General Item Category group as NORM
    3. I have assigned MRP Type PD in MRP 1 View and Strategy Group 20 (Make to Order Production) in MRP 3 View.
    4. Now created a Universal (Type 3) BOM for the product with one material component.
    5. Now also created a Routing for the Material with two operations having PP01 a control key.
    6. Now created a standard sales order for the product.
    7. Executed the MD50 for the Sales Order Item.
    Now where do I find the BOM components for this material in the Sales Order?
    After executing the planning Run MD50 I am only getting the requirements for Product only. I can't see any dependent requirements for the BOM components.
    How do I make sure that the BOM components are also planned while the product is planned?
    I have checked the component Stock Requirement List - there are no requirements generated from the Sales Order Product BOM.
    Pls help me on this. How to do this so that the raw material components are also planned?
    Thanks
    Purnendu

    Hi Dhaval, Sandeep, Ashok - Thanks a lot for your replies.
    I have checked the Planned Order Created through Planning Run.
    If I click on the Components Tab I am getting following message
    No material components were determined
    Message no. 61027
    Diagnosis
    Until now, no BOM explosion has been carried out or no BOM has been created for this material yet.
    Procedure
    Either explode the bill of material for this material, or
    create the components manually by processing the planned order in change mode.
    If I try to explode the BOM through Header Menu - Edit> Explode BOM
    I am getting the same message.
    If I click on the Bill of Material Tab - I am getting the same above messge.
    Ashok - I have tried both the Selection Method -
    Nil - Selection by Order Quant.
    1 - Selection by Explosion Date
    But with no effect.
    Waiting for your advice.
    Thanks and warm regards
    Purnendu

  • Oledb and path length - Oracle client and networking components ...

    Hello,
    I've been suddenly getting the
    "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation."
    error when trying to connect to an oracle 9.2 database using the msdaora oledb provider.
    "..ora92/bin" is in my PATH environoment variable and the hints about setting read and execute permissions on the ..ora92/bin direction didn't work for me. However, what did do the trick, was reducing the length the PATH environement variable to under 182 characters.
    Anybody else seen this that can explain what's gonig on here?
    Erik

    Hello Kamal,
    Thanks for your reply
    My system looks like this:
    OS: MS Windows XP Professional Service Pack 2
    msdaora version: 2.81.1117.0
    This problem has only recently surfaced, but has now appeared on at least two other systems as well as my own. Any system changes must have happened on all three systems. I have "automatic updates" setup on my computer and they maybe setup on the other computers - could the be responsible for breaking oledb?
    Other things I have tried:
    The Oracle Oledb provider is also not working. It gives me the error:
    "OraOLEDBpus.dll: the specified module could not be found"
    When I reduce the size of the PATH variable it works too.
    I am always able to run executables from the ../ora92/bin directory. So the path is only being wrongly interpreted by the Oledb providers.
    Erik

  • "Wake for network access" doesn't seem to work

    I have several Yosemite Macs.  My main Mac Energy Saver setting is set to wake for network access.  That's the only box checked (Display set to turn off after an hour). 
    I can't seem to get access to this computer on my network (get a "connection failed") after the display turns off.
    Any other settings I need to set to cure this?

    Please follow Linc Davis's advice to see if you have a Sleep Proxy server on your home network.  For example, here is what the command shows on my home network:
    dns-sd -B _sleep-proxy._udp local
    Browsing for _sleep-proxy._udp.local
    DATE: ---Sun 12 Apr 2015---
    16:34:14.530  ...STARTING...
    Timestamp     A/R    Flags  if Domain        Service Type         Instance Name
    16:34:14.531  Add        3   5 local.        _sleep-proxy._udp.   30-35-10-70.1 Pantry
    16:34:14.531  Add        2   5 local.        _sleep-proxy._udp.   50-35-10-70.1 TV_Console
    I have 2 Sleep Proxy servers active on my network (both are Apple Airport Extreme home WiFi Router base stations; the names Pantry and TV_Console are the management names I have given them).
    If you DO NOT have a Sleep Proxy server, then you MUST use a special program to wake up a sleeping Mac.  WakeOnLan is one such program.
    <http://www.readpixel.com/wakeonlan/index.html>
    The Sleep Proxy or WakeOnLan will send a specially composed network packet that the networking hardware listens for and will wake up the Mac when it is seen.
    The Sleep Proxy server pretends to be your Mac while it is asleep, and if you attempt to connect to the Advertised service, the Sleep Proxy server will send that magic network packet to wake up the Mac, and forward the connection request to the new awake Mac.
    <http://en.wikipedia.org/wiki/Bonjour_Sleep_Proxy>

Maybe you are looking for

  • Can we block the business partner master data for embargo reason?

    Hi,Experts:    Do you know if we can add the embargo block on business partner master data in GTS just like SPL checking? Thanks

  • LR 4 Edit in PE 10

    Using "edit in - PE 10", making changes and re-saving back to LR 4 the images do not show up in the catalog. Instead I have to import the changed PSD file. Is this normal or am I missing something?

  • How do I solve wifi connectivity issues on my Iphone 5S?

    The phone is not able to connect to the wifi while it is working perfectly on the computer right next to the phone..... What to do?

  • Hoe do i close a document in adobe reader touch?

    I have swiped everywhere on the screen with no luck of the 'bar' at the bottom when i went through the learning. I have yet to find a way to close the document and even when i go back to the start screen or the app list all touching of the icon just

  • Context change not working

    hi, i am doing a maping between an xsd and message type with structure which has: 1.nested structure 2.source field occurs more than once in thses netsed structure. fields not having multiple occurence have the same value as in source but the one hav