One save for multiple portlets in a page.
Hi,
I have 3 portlets in 1 page. All the portlets are having individual "Save" button to save some information in individual portlets. I need to create a new "Save" button which does the work of all these 3 Save buttons in one shot. Basically my new "Save" button should be able to save the information of all the 3 different portlets at once!Can we do this? If yes then how ?Need it urgently!
Thanks in advance,
Adi...
If you are still looking for the solution....
I think this can be done by declaring same named action in all three pageflows. And write code individually as to do the logic for each portlet respectively in their pageflows. The most important and third step is making portlet2 and portlet3 listen to portlet1. (This can be done by double-clicking portlet and entering the instance label of portlet1 in listenTo field. This has to be done for both portlet2 and portlet3.) This will make the control to execute the action in portlet1, portlet2 and portlet3 in that order whenever any of the save buttons is invoked.
--SJ.
Similar Messages
-
One instance of FCKeditor for multiple fields in a page
How to implement only one instance of FCKeditor (one set of buttons) for multiple textareas in a page?
Hello,
Is that possible with the normal FCK Editor?
I've never seen something like that on any website, but if you find such an example, I can have a look how it's done. If you see it somewhere working, we should be able to make it work in APEX as well.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://www.apex-evangelists.com/
-- http://www.apexblogs.info/ -
One delivery for multiple STO's
Folks,
I have multiple STO's for the same ship-to (plant). Items due for shipping would need to be combined into 1 delivery and not 1 delivery per STO.
Would this be possible? And if yes, how?
Thanks,
MZHi ,
Yes , We can create one delivery for multiple PO's .
Go to VL10D tcode --> Purchase order tab -- > enter the STO's and press execute
Select the STO's and click on background tab. Then it creates the log
Select the item again and press shift +F4
It will gives the log inforamation for the STO's and select the item and press on documents tab.
It will creates only one Delivery for all the STO's.
Now go to VL02N tcode and enter the delivery number then goto picking tab then enter picking qnty = delivery qnty
then press on " post goods issue "
Now go to MIGO to do the goods reciept then enter all the STO's here and check the item then save .
Only one document will be posted for all the STO's
Regards,
Usha. -
One OCS for multiple Company´s ???
Hello,
It´s possible to install multiple "areas" on one OCS? We want to provide a OCS for our customers. They shouldn´t see other caledars or adress-book. Only ther own "area".
KR
MathiasHi ,
Yes , We can create one delivery for multiple PO's .
Go to VL10D tcode --> Purchase order tab -- > enter the STO's and press execute
Select the STO's and click on background tab. Then it creates the log
Select the item again and press shift +F4
It will gives the log inforamation for the STO's and select the item and press on documents tab.
It will creates only one Delivery for all the STO's.
Now go to VL02N tcode and enter the delivery number then goto picking tab then enter picking qnty = delivery qnty
then press on " post goods issue "
Now go to MIGO to do the goods reciept then enter all the STO's here and check the item then save .
Only one document will be posted for all the STO's
Regards,
Usha. -
How to have one provider with multiple portlets in JDev 11g
Hi,
I am trying to create Oracle PDK Portlets using JDeveloper 11g but for each portlet JDeveloper is creating a provider. As In JDeveloper 10.1.3.4 we can have one provider with multiple portlets in it. But JDev 11g creates provider for each portlet. How can we have one provider with multiple portlets in JDev 11g. Is it something changed in 11g version or am I doing it wrong. As the Help says we can have multiple portlets in one provider but when creating portlets it does not do that. Any help is appreciated.
ThanksHi,
I am trying to create Oracle PDK Portlets using JDeveloper 11g but for each portlet JDeveloper is creating a provider. As In JDeveloper 10.1.3.4 we can have one provider with multiple portlets in it. But JDev 11g creates provider for each portlet. How can we have one provider with multiple portlets in JDev 11g. Is it something changed in 11g version or am I doing it wrong. As the Help says we can have multiple portlets in one provider but when creating portlets it does not do that. Any help is appreciated.
Thanks -
Can i install itunes multiple times on one computer for multiple users?
Can i install itunes multiple times on one computer for multiple users?
Like most applications you only need to install it once for it to be available to all users. (That said it is possible to install an application and only make it available to the current user, but that's rarely needed.)
tt2 -
How to create one delivery for multiple sales order
Hi!! Friends,
Can some one explain the steps to be followed in creating one delivery for multiple sales order in SAP SD.
Regards
AKASH
Message was edited by:
AKASH TAMBIHi.,
You can combine different orders in to one delivery ,But for the customer Order combination should be checked in the sales area data of the shipping tab,we can combine orders but the ship to party,Route,Inco terms,Shipping date,shipping point should be same,you can do in T.code VL04 & VL10
REWARD if helpfull
Thanks & Regards
Narayana -
How to create one TO for multiple TRs
Dear All,
how to create one TO for multiple TRs, kindly suggest me
Regards,
baluAs for your question: it is discussed in sAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Sorry I misunderstood your question.
The above mentioned solution won't create one single TO from multiple TR.
Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM -
One TPV for multiple Countries
Hi Experts,
Could you pls share experirnce/knowledge around having one TPV for multiple countries together. The scenario is like below:
1. There are mutiple Countries in Central America which are small islands for whom we need to roll out the Travel and Expense Solution.
2. The Company code is only one which contains employees from all these Countries.
Could you tell us how can we do the setup. Should we create one TPV at the company code level. OR should we rather use some other criteria for selecting the TPV maybe at the Personnel area or Personnel Sub Area level.
Your help is much appreciated.
Regards,
VijayHi Kiron,
These things I am aware about too. My real question is if I create only one TPV for the company code and assign the Country of the Company code then what issues would this cause. To name a few pls see below.
1) The domestic Country would always be the Company code Country so would be treated as Domestic Country and show on the Form also as domestic Country even for the employees who are from other Countries.
2) There are setting which SAP allows differently for Domestic and International like per diem, miles cumulations. So these necessarily have to be kept as same even though local laws are different in all these countries as Domestic is only the Company code Country.
So I need detailed analysis of what impact I will have by having only one TPV as against making many TPV like one for each Country by using some other parameter like Personnel area/Personnel sub area etc.
Appreciate your help!
Regards,
Vijay -
One invoice for multiple deliveries
Hi Gurus,
Can any one tell how can i create one invoice for multiple deliveries.
Regards,
Vinodone invoice for multiple delivers we can do in vf04
we can do in vf04
reward points if it is help ful
Thanks
mubeen
Edited by: mahammad mubeen on Mar 5, 2008 10:02 AM -
One cheque for multiple vendors
hi,
is it possible to generate one cheque for multiple vendors ?
cheque will be sent to bank and bank will deposit the amounts into vendor banks.
Can you anybody help me?
regards,
kalyanHi
Yes. you can do it
First transfer the amount to bank and from there bank will transfer the amount to respective vendors through ther banks.
Go for implementing automatic payment programme according to your client reqyuirement. Check TCode F110 which is master transaction for APP. Check at TCode F110-Environment-maintain Config.....
Cheers
Srinivas -
One lockbox for multiple company codes
Is it possible to have one lockbox for multiple company codes?
No, I don't think so. Lockbox is 1:1 for a Company Code.
You configure Lockbox for a Company Code.
You can use one of the 2 available Lockbox user exits (not sure which) to write a piece of code that searches invoices against the customer posted to different company codes. You will have to have the intercompany setups.
You may find an OSS notes for intercompany clearing.
Hope this helps! -
One inventory for multiple ORACLE_HOMEs ?
RDBMS version:11.2, 10.2
Platform : AIX
In one server , we are going to install multiple ORACLE_HOMEs (both 10.2 and 11.2). I have been asked to configure separate inventory for each ORACLE_HOME (each inventory within its own ORACLE_HOME). But i came across OTN posts which advices one inventory for all ORACLE_HOMEs .
1. How can i create 1 inventory for all ORACLE_HOMEs . Is it by specifying an inventory directory outside all ORACLE_HOMEs in OUI when you do the very first installation ?
2. Which one is more professional : one inventory for each ORACLE_HOME or one inventory for all ORACLE_HOMEs ?When installing Oracle software for the first time, the OUI will create a "global" inventory under $ORACLE_BASE.
Depending on you OS, to locate this inventory look at "/etc/oraInst.loc" (AIX+Others) or "/var/opt/oracle/oraInst.loc" (Linux+others).
You can add/remove Oracle homes from this inventory by using OUI or command line ./runInstaller.
Each Oracle home may also contain an "$ORACLE_HOME/oraInst.loc" file.
HTH
PS: +"One inventory for multiple ORACLE_HOME is a bad practice"+ -- Untrue. Perhaps only for those that don't know how to use it.
:p -
Shall I use one datasource for multiple connection pool?
Hi,
I need to clarrify that, Shall I use one Datasource for multiple connection pool in distributed transaction?
Thanks with regards
SureshNo. If its transactions across multiple databases you should use different datasources.
-
How to schedule one report for multiple company code?
How you can schedule reports in BW 3.5? Suppose I need to schedule one report for multiple company code, how can you do that and notify the users? I do not want to send multiple emails to the same user if the report runs for 20 times (for 20 different companies).
points are given for ASAP replies.
Thanks in advance
PeterDear Peter,
Try to restrict the Company Code with those 20 values and schedule.
Regards,
Ramkumar.
Maybe you are looking for
-
Urgent help required for network configuration
sir i have a mixed scenario right now. I have only three computer on home network. 1.vista accer travelmate 4720 laptop loaded with vista sp1 ultimate 2.normal pc : Core2 duo with XFX ATI REDION graphics card and this pc is loaded with OEL 5.3.x linu
-
Hi, All I have a application need periodically check an instrument status and I put it in the "Timeout Event" in main vi. I also need call some subVis for configuration etc. Somehow when I called those subvi, the Timeout event in my main vi was not r
-
How to get the log information when using a class?
Hi All, I have a simple question, which I don't know how to solve. I am using org.apache.commons.logging.Log and LogFactory to do some logging. A typical situation is exemplified in the following code snippet. import org.apache.commons.logging.Log; i
-
I just bought a new computer. Itunes only offers me the option of erase and sync, as I can only have it sync'd with one computer. I want to move my music to this computer from my ipod. Is this possible, or do I have to go back to my cds and upload
-
Import duty is shown as CENVAT Availed Additional duty in Cenvat Register
Hi all, Why Import duty is shown as CENVAT Availed Additional duty in Cenvat Register? ofourse it is going in to right registers at the time of posting excise invoice. but why in register it is shown as addnl duty? Thanks in advance, Girish