One SendMail task for multiple sequence containers

Hi,
Quick question, hope someone can help.
I have multiple sequence containers in my package. I only want to have one sendmail task for the failure/completion of the package. If I put the sendmail task in the last sequence container and the first seqence fails, the sendmail task will
not be reached and therefore, no email will be sent out.
Is there a way to have one sendmail task for all the sequence containers and allow it to send mail regardless of what sequence fails/completes?
Many thanks
P

Hi,
Just as Visakh suggested, we can use Event Handlers with Send Mail Task when an error or a warning occurs or when a task fails in the package. For more details, please refer to the following steps:
Go to Event Handlers tab, choose OnError in the Event handler drop-down list.
Drag a Send Mail Task.
Configure SmtpConnection and other details except MessageSource.
Go to Expressions tab and then expand this, then click on browse button this will open Expressions designer.
Choose MessageSource under Property window and then again.
Click on browse button this will open the second editor, the Expression Builder.
Then substitute values in Expression window like below:
"XYZ Job Failed"+"!"+"\n"+"Error Details:"+"\n"+"On Server – "+ @[System::MachineName]+"\n\n"+"Package Name
–+@[System::PackageName]+".dtsx" +"\n\n"+"Task Name(Task where job failed ) – "+ @[System::SourceName]+"\n\n"+"Task Type(SSIS Component)
– "+@[System::SourceDescription]+"\n\n"+ "Error Description -"+@[System::ErrorDescription]+"\n\n"+
"Error Code – "+(DT_WSTR, 12) @[System::ErrorCode]+"\n\n"
References:
Integration Services (SSIS) Event Handlers
SSIS Event Handlers Basics
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

Hi,
I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
e=External
I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
Best Regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Hi David Mc,
Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
I don't think I am the only one in the TestStand world that ne
ed this feature.
Best regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet. My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses. I have read that if each person gets their own iCloud account, this would work. However, I need to know what to do after I set everyone up with their own iCloud account. Do I make that the default email address to be contacted or can they still use their hotmail email addresses. Any help- with easy explanation- would be much appreciated!!

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

How to use one email adress for multiple recipients

Hello,
I'd like to know how to use one email adress for multiple recipients.
this would be very useful or projects. for example;
if i send one mail to [email protected], all people in this project get an email.
I will add the people in this project myself.
I know it is possible, but I don't know how to do it ;-)
please help me!

Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

One search help for multiple select-options in webdynpro abap

Hi,
I need a way to use one search help for multiple select-options fields. My scenario is :
I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
I think I won't be able to use this way. What do you say?
As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
MY TABLE (ZBYYT080) CONTENTS:
SID     VARBL     VALUE     LANGU     VTEXT
ADS     $WERKS     1     T     Werk 0001
ADS     $WERKS     11     T     OZYAS GIDA URETIM YERI
ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
AGT     $WERKS     2301     T     KAMLI DAMIZLIK
AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
ADS     $VKORG     22     T     AA KİMYASALLAR
ADS     $VKORG     8001     T     İINSAAT BOYALARI
AGT     $VKORG     6500     T     DAMk St.Org
AGT     $VKORG     5400     T     PANAR St.Org.
I wish I'm clear enough..
I will be gald if someone answers me as soon as possible...
Thanks İn advance..
MERAL

Hi,
Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
Am I right ?
If Yes, then in the interface IF_WD_SELECT_OPTIONS
method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
have importing param like I_VALUE_HELP_TYPE and I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
etc which may help you to link your create DDIC Search help to selection screen params.
this is just a clue from my side. I haven't tried it myself.
You can go to the where used list of this method and find some sample implementations which use these params.
Hope this helps.
Regards
Manas Dua

Can I use one itunes account for multiple users and multiple devices

Can I use one itunes account for multiple users and multiple devices?

The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

How to create one inbound delivery for multiple purchase order?

Hi Experts,
Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)?
Is there a configuration needed for this? If yes, please let me know the configuration to make this happen.
Appreciate your help on this. Right answers will be rewarded.
Thank you.
with regards,
Muthu Ganapathy.

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

One inspection lot for multiple materials of purchase order line items

Hi All,
My client requirement is one inspection lot for multiple materials of purchase order line items.
Please share your thoughts.
Thanks in advance for early reply.
Regards,
Jishu

I totally agree with Amol.
I don't think I would touch that development nor would I ever tell a client it could reliably be done through development.
Knowing what I know about the table structures, I don't think you could create any development for this that could use a significant amount of the existing tables and functionality. I think you'd have to create all your own Z tables and basically rebuild the functionality. Tying it back in with SAP data will be difficult.
You're even looking at all custom screens for your results recording and UD as well. And if you have follow-on functions like batch classification requirements, batch determination, COA publication, results copy functions, use of DMR and sampling procedures, physical samples, quality notifications, etc. etc.. you could be looking a whole lot of development.
Craig

One skype number for multiple users in Skype Manag...

Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager?
If so, how do I go about it?
I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/...

You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions.
Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]
http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf
7.5 Online Numbers for incoming calls
You can use both business Skype accounts and Online Numbers simultaneously on a
single SIP Profile if you wish. In other words, you may have multiple business accounts
and Online Numbers added to one SIP Profile at the same time.
7.5.1 Adding an Online Number to your SIP Profile
Shows you how to setup such
Thanks,
Kent C.

One billing document for multiple deliveries which are for different PO

Hi All,
I have a scenario where i need to create one billing document for multiple deliveries.
Payer is same
Ship-to is same
PGI date different
Sales area is one
PO different
In standard SAP it will create seperate billing document for different PO
Please advice if there is a different copy routine which will combine all the POs in one billing document.

Hi Mr. Bhat,
Go to VTFL --> Select the combination of your delivery type and billing type --> Double click at Item(Left side) --> Select your item category --> Click at details
In the feild "Data VBRK/VBRP" --> I think the routine assigned is 601 (Inv.split - PO Num.) --> Now change it to 3 (Single invoice)
Then try your process, Hope it helps.
Regards,
MT

One Billing document for multiple Dilevery Documents

Dear All,
I m trying to generate one billing documents for multiple dilveries documents with Tcode : VF04. But it is generating billing documents for all the delivery documents. M i missing any configuration or some thing like that.
Suggestions?
Regards,
Vikas

Hi Vikas,
after you created the billing document there is one menu option protocol. If have it not 100% in mind and i am note able to test it for the moment.
T

Execution of Task for multiple posting period

Dear Experts,
As i have seen it is compulsory to punch posting Period value in Permanent Parametere, Is there any possibility to exeucte Task for multiple period at a time.
Thanks
Ritesh M

Yes, there is such a possibility. But it requires EhP2:
http://help.sap.com/erp2005_ehp_02/helpdata/en/45/2b650d4ad46d95e10000000a114a6b/frameset.htm

Common follow-up task for multiple lead transaction types

Hi Gurus,
Happy New Year.
I am creating 3 lead transaction types as per the business requirement and i want to use common lead follow-up task for all three Lead transaction types. My question over here is what are the problems if i use common follow-up task for multiple lead types.
Thanks and Regards,
Arun

Hi DJ,
Thanks for the Quick response....
comming to your questions,
1. As of now i am planning to use same number ranges for 3 lead transaction types.
2. Yes these lead types are user specific. first two lead transaction types will be seen by User A , and Lead Type 3 will be seen to User B.
please suggest me how to go on.
Awaiting for your response.
Thanks and Regards,
Arun

One skype number for multiple users in Skype Manager

Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager? If so, how do I go about it? I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/3275656#M14366.

You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions. Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf 7.5 Online Numbers for incoming callsYou can use both business Skype accounts and Online Numbers simultaneously on a
single SIP Profile if you wish. In other words, you may have multiple business accounts
and Online Numbers added to one SIP Profile at the same time. 7.5.1 Adding an Online Number to your SIP ProfileShows you how to setup such Thanks,Kent C.

How Can I Create One Entry Sheet For Multiple Line Items of A PO

Please Tell Me How Can I Create One Entry Sheet For Multiple Line Items of A PO

hi,
It is not possible to create single Service Entry sheet for multiple PO line items. It is 1 to 1 relation.
you have to make different service entry sheets for different item of service master.
regards
Manish Joshi

One SendMail task for multiple sequence containers

Similar Messages

Maybe you are looking for