One Shipping Point for Multiple Storage Location
Hi
How to ship a sales order from Multiple storage location.The system is not accepting .Can any one tell us the missing portion ?
Thanks
We want to assign Shipping Point to Multiple Storage Location.It is all batch Managed ..The Material will available in two or three location.We don't want the stock to move to shipping location.We want to confirm at the time of creating sales order with the available location to one shipping point
Similar Messages
-
How to assign shipping point for STO
Hi experts
for STO, PO=>Delivery
When creating PO, enter material master then press enter, client want to proposal shipping point automatically
for example, when create PO, enter material master, if the material master MRP2 view storage location is 1130, then proposal shipping point 7000 after press enter
Is SAP stardard function can do this?Hi,
If your configuration is proper in IMG, then shipping tab will reflect in P.O
And for your speciefict requirement activate shipping point determination on the basis of storage location
IMG >> Materials Mang. >> Purchasing >> Purchase order >> Set up stock transport order >> set up stock transport between storage location >> set up storage location dependend shipping point determination
Here u can carry 2 activities
In this define rule as Strorage location speciefic shiping point detemination for delivery type
and next step assign shipping point according to storage location
kapil -
GR for Sevaral storage locations
Hi to all
Plz explain this scenario
Iam storing same material X in different storage locations with in a plant.
Then how to do GR for Multiple storage locations in single process?
Thanks & regards
raviHi,
During confirmation or reprocessing the goods movement we can split the goods movement. This can be done in Goods movement over view.
Functions:
1. We can change the reqmts qts , plant, sloc and special stock.
2.We can use the function split goods movements to enter sevaral goods movements for one reservation.
3. We can use this function if we withdraw material components from different sloc.
Confirmation : co11n/co15
Reprocessing confirmation: co16n
Regards,
nandha -
Inspected stock posting to multiple storage location without batch
Hi,
At the time of Usage Decision, I want to post the inspected stock to multiple storage location i.e., Rejected Stock to Scrap Storage Location, Qualified Stock to Unrestricted Use Storage Location.
Quick response will be appreciated.
Anandkumar KSThe scrap line has no storage location since that stock is typically written off and scrap cost center is defined in configuration.
A possible alternative is to set up VMENGE08 and VMENGE09 with the same material movements you want to use. You obviously aren't using the 553 movement type as that writes off the material. That could give you two lines to use for your scraping. I can't remember if these stock posting lines give you the storage location option or not and I don't have a sandbox available to test today. If you need to post more then two grades in one inspection lot, you'll have to do the first two postings, save the UD, then come back in and do a second posting for the next two grades.
Read the configuration help file you'll find in confg for "Define Inventory Postings" under the QM config.
You can also change the displayed names of the stock posting lines. That's explained in the config file as well.
Craig -
HU in multiple storage location
Can HU resided in multiple storage location?? I'd like to know if it's possible to transfer partial qty of an HU into multiple storage location with the same plant/whse. Here is the scenario:
HU1234 has 100pcs in plant ABC 0001 whse 011 bin aa-001-c
Is the below possible or would I need to have unique HU ids for the other three HUs.
HU1234 25pc in plant plant ABC 0001 whse 011 bin aa-001-c
HU1234 25pc in plant plant ABC 0002 whse 011 bin aa-001-c
HU1234 25pc in plant plant ABC 0003 whse 011 bin aa-001-c
HU1234 25pc in plant plant ABC 0004 whse 011 bin aa-001-cI also think I need to separte HUs but I just making sure I'm not missing something.
The business scenario is that we want to create a plant w/ mulitple storage location to move inventory in and out for specific key customers "Geo Hub" we are trying to avoid having to handle the HU and limit physical movement until we actually need to ship it out on an Outbound DN.
I know in our current enviroment we can only transfer a full HU via HUMO and if we want to transfer a partial HU we move it to repack and split it. -
Needed config settings for automatic storage location
hi,
sap gurus,
configuration settings needed for automatic storage location at sales order level.
it is coming by using OVL3 at delivery document level.
but we need it sales order level.
regards,
balaji.tHi Balaji,
In standard Storage location cannot be defaulted in Sales order. OVL3 is for determining the storage location in Delivery.
However to map your requirement of having Storage location determination in the Sales order do the following:
In the Plant Setting IMG> Enterprise Structure> Definition> Logistics - General> Define, copy, delete, check plant. Here select your plant and go to Address for this plant. Here in Search term 2 Maintain some alphabet say "A". Now ask your ABAPer to write a user exit for determining the Storage location if the Sales order has the same Plant used in it with search term as "A" then use table V_TVKOL (storage location determination table) and fetch the correct storage location based on Shipping Point + Plant + Storage conditions.
Hope the same works for you!!
Regards,
Ajinkya -
Shipping point for inbound deliveries
Hi All,
Please advice on two different sub points listed below.
1. How to assign XXXX shipping point for inbound deliveries for newly created locations.
2. How to create partner storage location
Kindly provide SPRO path
Thanks
MichaelModerator message: Basic frequently asked question - Please search forum for answers and read the docu in help.sap.com
See as well our rules of engagement: http://scn.sap.com/docs/DOC-18590
A good way to search the forum is with google. See this blog with details for a good search
http://scn.sap.com/community/support/blog/2012/04/16/getting-the-most-out-of-google-optimizing-your-search-queries
The discussions are not a replacement for proper training
This blog describes how to use the SCN search: http://scn.sap.com/community/about/blog/2012/12/04/how-to-use-scn-search
Thread locked -
Assign multiple shipping points to multiple tranportation zones?
Hi All,
I have a requirement according to which more than one shipping point is to be assigned to more than one transportation zone(destination zones). I dont see that option in the spro screen. can anyone tell me how can this be done?
Thanks & Regards/AryanHi Aryan,
A shipping point has one departure zone in its location data.
It doesn't need to be assigned to destination zone. Check out: IMG -> SD -> BF -> Routes -> Route determination->Maintain Country And Transportation Zone For Shipping Points
If you have interest in Route determination, the route is proposed in order per config:
departure Zone(from shipping point) + destination zone(CMR) + transportation group (MMR) + shipping condition
What one needs to do is to build links between DepZones and DestZones according to customer needs and services of shipping agencies, then shipping points located in that Departure Zones can deliver goods to specified destinations. Hope that's what is asked.
Regards -
Mc.9 Multiple storage location issues
Hi,
I am fetching data from mc.9 in my program but if the use enter multiple storage in selection only 1st value is printed following is code and how will i come to know which material is for which storage location since mc.9 data is not getting stored anywhere
SELECT-OPTIONS : SLOC LIKE S031-LGORT.
SUBMIT RMCB0300 WITH SL_WERKS-LOW = PLNT
WITH SL_LGORT IN SLOC
WITH SL_MTART = 'HALB' WITH SL_MTART = 'VERP'
WITH SL_MTART = 'ROH' WITH SL_MTART = 'FERT'
WITH SL_SPMON-LOW = FPERIOD
WITH SLV_NO = 'STK'
WITH SL_SPMON-HIGH = FPERIOD EXPORTING LIST TO MEMORY AND RETURN.
while append to internal table even if i specify both high and low value it prints low and high incorrectly how will this problem will solved
itab-lgort = sloc-low.
Help required for same.
Thanks
ShrutiHi Shruti,
I simulated the code given by you and all the storage locations are being populated in the backed.
You can check this by putting a breakpoint at the below code in RMCB0300 and checking the value of sl_lgort[]. You will receive the number of SLOC inputs provided.
AT SELECTION-SCREEN OUTPUT.
FLG_FOUND = FALSE.
PERFORM SPEZIAL_AT_SELECTION_SCREEN_O IN PROGRAM (LIS_PROGNAME)
CHANGING FLG_FOUND
IF FOUND.
This is a data issue and you may not have any records for the selected input.
Regards,
Jovito.
Edited by: dsouzajovito on Dec 29, 2010 5:56 AM -
One billing document for multiple deliveries which are for different PO
Hi All,
I have a scenario where i need to create one billing document for multiple deliveries.
Payer is same
Ship-to is same
PGI date different
Sales area is one
PO different
In standard SAP it will create seperate billing document for different PO
Please advice if there is a different copy routine which will combine all the POs in one billing document.Hi Mr. Bhat,
Go to VTFL --> Select the combination of your delivery type and billing type --> Double click at Item(Left side) --> Select your item category --> Click at details
In the feild "Data VBRK/VBRP" --> I think the routine assigned is 601 (Inv.split - PO Num.) --> Now change it to 3 (Single invoice)
Then try your process, Hope it helps.
Regards,
MT -
Can we maintain separate Profit center for each Storage location?
Dear Friends
My Org structure is like below:
We have 10 profit centers, one plant and 5 storage locations.
Now my requirement is these 5 storage locations belog to 5 different profit centers.
Can we assign different profit center for each storage location?
Regards
Kiran ADear Mehmet Gunenc
It is not happening because the profit center area is defined as General plant parameters. It is denoting the Profit Center is at Plant level and not at storage location level.
Please check it.
Regards
Kiran -
Getting building code for teh storage location in the output
HI !
In one of my program I ahve to bring in several plant details as well external bill of lading deatils as well as the building code . I have been able to get the other details except for the building code which needs to come from teh adrc table I suppose. Actually not able to connect the detaisl to grab in the building code. Would anyone be able to help me out in getting the building code for the storage location in my program if possible .
Help would be greatly appreciated.
ThanksI wrote down a code for that and this
is what its doing as of now.
When I do the selection of a single plant and for a particluar date
it does give me the correct storage location building
code , bust as soon as I put a range of plant say 120 to 300
it copies the the storage location building code
of the previous plant itself which si contradictory.
I would like to get the correct building code
even when I do the range of selection like when I do
a single selection of plant.
For example when I select the range between 0135 and 0351
this is the output I get.
50002438 80002249 0135 ABWP0000659 100051 < correct
50002439 80002250 0135 ABWP0000659 100005 < correct
50002447 80002257 0135 ABWP0000659 100005 < correct
50002459 80002258 0135 ABWP0000659 100005 < correct
50002460 80002259 0135 ABWP0000659 100005 < correct
50002461 80002260 0135 ABWP0000659 100005 < correct
50002424 80002235 0351 ABCT0000426 100101 < copied teh B.code from Strg loc "CT" of plant 135
50002429 80002237 0351 ABTM0082315 100101 < copied teh B.code from Strg loc "TM" of plant 135
50002430 80002244 0351 ABWP0000659 100101 < copied teh B.code from Strg loc "WP" of plant 135
The code I used :-
loop at gt_adrc assigning <fs_adrc> . < this is where I am trying to get the building code from S.Loc address into lgobe
loop at gt_twlad assigning <fs_twlad>.
if <fs_twlad>-adrnr = <fs_adrc>-addrnumber and
<fs_twlad>-lgort = <lfs_lips>-lgort_i.
gt_deliveries-lgobe = <fs_adrc>-building.
endif.
endloop.
endloop.
********and then .......
* Selecting Address Number from TWLAD
select werks lgort adrnr
from twlad
into corresponding fields of table gt_twlad
where werks in s_werks and lgort in s_lgort .
* Selecting Facility code
if not gt_twlad[] is initial.
select addrnumber name2 street roomnumber building
from adrc
into corresponding fields of table gt_adrc
for all entries in gt_twlad
where addrnumber = gt_twlad-adrnr.
endif.
if not gt_adrc[] is initial.
* Get the provinces
select * from t005u
into table gt_t005u
for all entries in gt_adrc
where spras = sy-langu and bland = gt_adrc-region.
endif.
loop at gt_twlad assigning <fs_twlad>.
clear gt_lgort. -
Different safety stocks for differnt storage locations?
Hi all,
Can any one tell me if it is possible to set two different safety stocks for two diffetent storage lacations for one materila?
If yes, How?
Thank you,
UtpalHello UNP,
Normally, planning is useally carried out at plant level, however you can do MRP at Sloc level as well.
Safety stock is planning data which is defined for entire plant where as reorder level and replinishment quantity can be defined saperately for each storage location, but not safety stock.
hope this helps.
Regards
Arif Mansuri -
Warehouer Management for existing storage locations...
Hi,
We have several storage locations and only one of them was WM. All other storage locations do have stocks but they are not under WM. Now we decide to bring one of the other storage location under Warehouse Management... Which steps we should follow to avoid any future problems in the Warehouse?
Thanks in advance for the solutions!!!Better to create the new storage location and than activate warehouse for that storage location than do the transfer from existing storage locaiton to the new with WM one.
-
MF60 Multiple Storage Location Check
Hi Friends,
Could someone please tell me if it is possible for the Pull List (MF60) to look at multiple storage locations (say a staging location and a stock room)? If it possible then what config do I need to do?
I would really appreciate your help. Thanks
Regards,
JPHi Mahesh,
I have tried that already but I faced the following problems:
1) If there is a storage location assigned to the Material then when I run MF60 it only checks for the Material in the specified storage location even though I might have defined the stock determination strategy and defined the sequence for two storage locations in it.
2) if I dont assign any storage location to the material (in the marerial master, BOM or routing) then when I run MF60 it doesn't come up with anything even though I have defined the stock determination strategy and defined the sequence for two storage locations in it. My production order doesn't show an issue storage location for the components but in this case if I do a order confirmation, then it uses the stock determination strategy to issue the component using the sequence defined
I hope I have explained these problems clearly but please let me know if you need any further information. I really appreciate your help.
Thanks,
JP
Maybe you are looking for
-
Utilizing item category ALEN - Creation of PO is not auto generated
All, I am utilizing item category ALEN during my sales order creation process. ALEN is set up with "create purchase order automatically" flag. I am utilzing schedule line CB and I have maintained the order type NB, item category is 0 and acct. assi
-
How Cost is displayed in planning book
Hi Sources 4001,4002 and destinations 3001,3002,3003 & 3004,After SNP optimizer run,the following results are displayed 4001 to 3001 -------900MT is sourced from 4001 to 3001 4001 to 3003--------1000MT is sources from 4001 to 3003 How cost per MT is
-
First iWeb now Keychain Access doesn't work properly
I can't view passwords by clicking on Login.
-
Updating a remote Oracle table
I need to query about 20 tables on one server to get data that updates 1 table on a different table. How do I reference the remote table in SQL? Do I need any links to the remote table?
-
WuSB54G can't acquire IP address
I've wirelessly connected wrt160N v3 wireless router to a machine with a wuSB54G v4 usb wireless adapter. The machine with the USB adapter appears to correctly connect to the main wireless router (wrt160N) OK, but the machine with the adapter is neve