One skype number for multiple users in Skype Manager

Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager? If so, how do I go about it? I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/3275656#M14366.

You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions. Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf 7.5 Online Numbers for incoming callsYou can use both business Skype accounts and Online Numbers simultaneously on a
single SIP Profile if you wish. In other words, you may have multiple business accounts
and Online Numbers added to one SIP Profile at the same time. 7.5.1 Adding an Online Number to your SIP ProfileShows you how to setup such Thanks,Kent C.

Similar Messages

One skype number for multiple users in Skype Manag...

Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager?
If so, how do I go about it?
I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/...

You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions.
Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]
http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf
7.5 Online Numbers for incoming calls
You can use both business Skype accounts and Online Numbers simultaneously on a
single SIP Profile if you wish. In other words, you may have multiple business accounts
and Online Numbers added to one SIP Profile at the same time.
7.5.1 Adding an Online Number to your SIP Profile
Shows you how to setup such
Thanks,
Kent C.

Can I use one itunes account for multiple users and multiple devices

Can I use one itunes account for multiple users and multiple devices?

The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

One JACK server for multiple users

It seems that support for JACK_PROMISCUOUS_SERVER has been removed, so JACK only allows programs to connect which were started by the same user who started the JACK server. Is there another way to tell JACK to accept connections from other users? Or do I have to start two servers (one for each user) communicating via the local network?
Why I'm asking:
My browser is running with the permissions of the user "browser" to prevent malicious code executed by the browser to seriously affect my files. This leads to the problem that audio playback in the browser is rendered mute, as it cannot connect to the JACK server that has been started by my main user account.
Any ideas on how to make this work?

I don't think this was ever "supported". I somehow assume that the hack still works (with JACK_PROMISCUOUS_SERVER) but I have yet to go back to it since the last discussion about it. According to Torben H. (read the last few messages of that topic) it should work.
NetJACK works in a different way and allows different clients to connect, AFAIK. It has been suggested that some form of this exact functionality can be used in lieu of the promiscuous trick for JACK itself.
Anyway, for MPD, you can try the alternative setup.

How do I use one downloads folder for multiple users?

I recently added my girlfriend a profile in my Imac. We both have seperate Profiles and logins however I would like to find out, if the the Downloads folder can be used by both profiles. I found that each profile has their own Downloads folder, and goes to their own locations.
I would like to find out, if its possible to re-direct my downloaded files as well as her downloaded files into just ONE "Downloads" folder. The default destination of the downloads folder would be /users/girlfriend(name of girlfriend). I want to change it to /users/(me) so that all downloads would just go to one folder.
Thanks in advance!

Direct your downloads to Users-Shared

For multiple users on a computer, will Firefox Sync synchronize all the users on a computer or only the one logged on?

For multiple users on a computer, will Firefox Sync synchronize all the users on a computer or only the one logged on? For instance my spouse and I will share a laptop and I want to sync my Firefox when I log on there also but do not want to sync her data.

Curt
how do you know if your using the
Central cache all distributed cache ?
and are they both stored in the same place ?

Can i install itunes multiple times on one computer for multiple users?

Can i install itunes multiple times on one computer for multiple users?

Like most applications you only need to install it once for it to be available to all users. (That said it is possible to install an application and only make it available to the current user, but that's rarely needed.)
tt2

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

One search help for multiple select-options in webdynpro abap

Hi,
I need a way to use one search help for multiple select-options fields. My scenario is :
I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
I think I won't be able to use this way. What do you say?
As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
MY TABLE (ZBYYT080) CONTENTS:
SID     VARBL     VALUE     LANGU     VTEXT
ADS     $WERKS     1     T     Werk 0001
ADS     $WERKS     11     T     OZYAS GIDA URETIM YERI
ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
AGT     $WERKS     2301     T     KAMLI DAMIZLIK
AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
ADS     $VKORG     22     T     AA KİMYASALLAR
ADS     $VKORG     8001     T     İINSAAT BOYALARI
AGT     $VKORG     6500     T     DAMk St.Org
AGT     $VKORG     5400     T     PANAR St.Org.
I wish I'm clear enough..
I will be gald if someone answers me as soon as possible...
Thanks İn advance..
MERAL

Hi,
Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
Am I right ?
If Yes, then in the interface IF_WD_SELECT_OPTIONS
method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
have importing param like I_VALUE_HELP_TYPE and I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
etc which may help you to link your create DDIC Search help to selection screen params.
this is just a clue from my side. I haven't tried it myself.
You can go to the where used list of this method and find some sample implementations which use these params.
Hope this helps.
Regards
Manas Dua

Setting up accounts for multiple users

Suggestions for allowing multiple users to access one account to avoid having to reimburse folks for every download on their work iPads?

short answer, no. Mail.app does not have support within itself for multiple user accounts. It displays the messages from the mailboxes of the user that is currently logged in. so if you want multiple people to read their mail on the same mac without being able to read other users' mail, you will need to set up multiple user accounts. alternatively, use another client. i think thunderbird supports multiple mail accounts under the same user account. hope this helps.

Is there a way for multiple users to connect to my home sharing with their iOS device to select music to stream to my A/V receiver jukebox style?

I have an A/V receiver that I can connect to and select music to stream over my network but I want to know if I have a party if it's possible for multiple users to have access on their own devices to my home shared music and select music to play like a jukebox.

I almost forgot that using folders can allow each folder to contain a song. I also recall touch tracks or one key play...

How can I create a folders of apps for multiple users?

I use several iPads with my students and would like to set up a folder for each student. I want to place "an alias" of each app the student uses in their folder. On my Mac, I can "make alias" and place aliases in seperate folders. How can I do that on my iPad? Thanks!

You can drag one app on top of another and make a folder. However the limit to this is, for your situation, there can be no sharing of apps....the app Fred can only be in one folder because it's only on the device once. (so it may not work for what you need)
and I cannot recall if you can edit the name of the folder.
Unfortunately, for situations like yours, the iPad was created to be a single user device, so there's really not support for multiple users or multiple levels of access.

SESSION VARIABLES : HOW TO TEST FOR MULTIPLE USERS

I have a username session variable set up on a localhost testing envirnoment.
This works fine for one user, but when I open another occurence of the browser (or just another tab) to test for multiple users the system overwrites the session variable with the last username input.
So the question is:
Why doesn't dreamweaver hold an instance of the session variable for each browser session? and if not what are your suggestions?
Thanks
Adam.

Thanks for that.
After scouring the internet I found the only way of running 2 instances of firefox without them sharing the session variables is to create 2 new firefox profiles in windows + set the MOZ_NO_REMOTE environment variable.
Internet explorer is much easier as it has a 'new session' option in the file menu, but seems to have more trouble displaying tables correctly.
Hope this helps anyone with a similar problem.

Call for adobe form is going for dump for multiple users

hi,
i am calling an adobe form in a program i.e. for multiple users. now my problem is.....
3 people are using same tcode to generate the adobe form output for different data. but when they click at a time on the button to generate the adobe output, then adobe form is coming for only one user and it is going for dump for other users.
and this dump is coming because of exception "CX_FP_API_INTERNAL" in funtion module FP_FUNCTION_MODULE_NAME which i am using to get the function module name of the adobe form in my program.
can u please give me some solution to rectify this issue....

That's nothing!
An engineer and I contacted Adobe technical support by phone to ensure the PC I was having custom built was configured to its optimum. They advised XP64 as the best operating environment. After that discussion we had to completely revise procurement, etc to get the bits and compatible XP64 compatible software, putting the build project back a few weeks as well, Imagine how I laughed when I found out on one of these forums that XP64 is the worst choice and totally unsupported by CS4!
I have written to Shantanu Narayen, Adobe CEO and didn't even get an acknowledgement I raised this last week on the Adobe stand at BVE and was told they'd get someone to contact me asap but guess what, niet...! To be fair there has been one Adobe executive that recognises the problem and the damage poor customer support is causing the company; he has been as helpful as he can. Unfortunately, it seems the overall Adobe culture at the top is "get the money and run". If your problem goes beyond what's already on their web pages, tough luck!
Regards,
Graham

WebStart Single Install for multiple users

Has anyone figured out how to solve the problem of having to install the software for multiple users now?
With recent versions of the Sun WebStart, the cache directory has changed to the user's personal directory.
It used to be that the cache directory was a common shared directory off the C: drive.
For the software we have developed, it was great to install once as the admin, download the files so that they are cached, and then copy the links to the all users desktop which pointed at that shared location.
Now there appears to be no way to do this. We've looked to find the default cache location to change it, but there is no way to specify this (that we've found).
I know I can change each user's cache directory to point to a common location, but it means signing on as each user and making this change manually which takes a considerable more time than it did before. Java WebStart was the EASY way to install the software before (and did not require a browser). Now it is harder than just using a browser with the plugin. We'd like to get the browser out of the picture though still.
I can see how this feature could benifit individual users who only want their own programs to show up , but we really need to make it work like before for ease of use. With the number of users we are dealing with, it would be very difficult to tell them to click on a link to install the program but only do that the first time, then start using the new link that is created by the program.
Any suggestions from anyone?

Sorry, I just realized this is in the wrong forum.
I'll go post it in a more correct forum instead.

One skype number for multiple users in Skype Manager

Similar Messages

Maybe you are looking for