One Solution For No Sound for imovie on Export to ipod from QT

In converting edited imovie projects to video ipod movies, I found the video had sound only for the first edited "clip" in the timeline. I finally solved this problem by extracting the audio from the clips- then saving the project. I convert the project movie to an ipod movie by first opening the QT imovie file in the project with QT pro 7.04, then export to ipod.

See my post.

Similar Messages

-FIX FOR NO SOUND ON VIDEO CLIPS PUT ON iPOD-

Hi, I was just playing around, trying to get an .mpg (MPEG-1) file to play on the ipod. I exported it with QT using the 'Export for iPod' option, the video worked, but there was no sound, I know that a lot of people are having this problem. Here is how I got an old MPEG file to work on my iPod video: (PS: You have to have QT Pro, I used 7.0.3 Pro)
1) Take your original file (MPEG-1, MPEG-2, or AVI, etc) and open it in QT and then go file 'Save As', select 'Self Contained Movie' and then hit save. This will make a copy of the movie, but put it .mov format.
2) When it is done, open the .mov file it just created, and using the QT Pro 'copy' feature select the entire movie (Cmd+A) and then copy that (Cmd+C).
3) Open a new QT player (Cmd+N) and then hit Paste (Cmd+V). It should have copied the movie from the .mov file into an UNSAVED New QT Player window.
4) Now, go File>Export... (Or Cmd+E) and then select 'Movie to iPod' in export to dropdown. Name your file and hit save, it will begin exporting the file into a .m4v file. (Which the iPod likes)
5) When it is done, which can take a very long time (It took me at least 5-7hrs to export a clip that was 1hr long)
6) Drag the newly created .m4v file into iTunes, update your iPod, and the iPod should read it and it should have video AND sound together nicely, which has been the big problem.
Try this out maybe copying a very small portion of the movie (back at step 2) to a new player, maybe 10-20sec worth as this will not take very much time to export to the .m4v file and will allow you to put it on your iPod to test it out and see if it will work.
Try it out and I hope it works for you. Post any comments as well. Thanks, Dylan

I have also found a fix for this (MAC only probably). It requires 2 free apps, and it doesn't take horribly long, I think one of the apps does the same exact thing as quicktime pro when you export from there, so it might take a while.
1. Download the app MPEG Streamclip.
2. Download the app MoviesToGo
3. Open your muxed video in MPEG Streamclip
4. Go to File>Export To Quicktime
5. Choose a Quality then Make Movie (this goes fast)
6. Open the created movie in MoviesToGo (or another iPod Video Exporter)
Then your video will be able to play on the iPod with sound, and its free.
Hope This Works For You Guys

Configuring full landscape in one solution

Hi all,
I am liitle confused.I am using ECC 6 . i have normal 3 system landscape n now installed solution manager in my system,Now want to configue that for my landscape.Should i put these servers development,quality and production server in one solution.Also while configuring for dev server ,which clients do i need to generate RFC's, same thing for quality server which clients do i need to genetare RFC's and same thing for production server?
Please help me ,i m really confused.
Regards
Praveen

Praveen,
All processes should run in only one solution. So systems involved in the same business process belong to the same solution. You thus do not mix production and dev servers etc in one solution.
You could create a single solution for each of these environments (If I remember correct you can actually set the role of the solution, i.e. Production System,when defining the solution).

Managing multiple iPods from one computer

The existing posts re: managing multiple iPods/iTunes accounts from one computer don't seem to address my question. I have been sharing my iPod with the family, and want to get my son his own for his birthday. Can I manage both iPods from the same computer? Does the iTunes software have the ability to "recognize" which iPod unit is attached? I'm dying to get his music out of my iPod ...

Can I manage both iPods from the same computer?
Yes.
I'm dying to get his music out of my iPod ...
Create new playlist and put the music you want in it.
Open iTunes prefs -> iPod and select Automatically update only selected playlists and pick this new playlist.

How Do You Rate Your Current iPod's Sound Quailty vs. Your Older iPods?

I have had a 512 Shuffle, a 4GB Nano, a 2nd gen. iPod and a 3rd gen. iPod. I am a full time sound recording engineer and sound quality is what I am about 10 hours a day. My new 4th generation iPod sounds terrible. Its has very painful and aggressive hi-mid/low-hi's. Overall it has a thin sound with flabby bass. (Yes I do spend hours experimenting with the EQ settings on many different types of songs.) I have to get rid of it. It's not miles different from other iPods, but different enough to be very displeasing for this sound engineer!
Do All 4G iPods Sound Harsh, Thin?
*What has been your best sounding iPod?*
So far my reviews:
2Gen iPod and a 3Gen iPod = good iPod sound quality (the average)
512 Shuffle = my favorite sound quality, full and very warm, decent bass
4GB Nano = PUNCHIEST bass, great sound but slightly thinner than the mighty Shuffle!
BTW, I use Sony MDR-EX71 in-ear sealed headphones which, in my opinion, have no competition as far as price/performance ratio for this "disposable" item. Anything better for $30-$40?

This article should take you through it
https://discussions.apple.com/docs/DOC-3991

HT2731 my oldest daughter recently bought a new ipod touch and gave her old one to her brother. I need to know how to unlink the old ipod from her account without losing all the music and games on it. He would like to have his own account.

My oldest daughter recently bought a new ipod touch and gave her old one to her brother. How do I unlink his ipod from her account and set up his own without losing the music and apps already on it?

Connect it to his iTunes library and set it up as a new device. You should be prompted to Erase and Sync the iPod if his iTunes library is separate from hers.
Or head to Settings -> General -> Reset -> Erase all Content and Settings.
B-rock

Thanks for the reply to my question regarding sound in iMovie and sending me the online links. however the online links are impossible to play as they upload too slowly with the result that the playing keeps stopping waiting for the content to catch up

Thanks for your reply to my question regarding sound in iMovie. However I cannot follow the links you sent as they upload too slowly and therefore the instructional movie keeps stopping waiting for the content toload. Surely theremust be a solution for this??
Thanks in advance
lolly

Please continue posting in your original thread.
With the amount of traffic on these forums it is impossible to chase around finding this.

One sound for incomming email, and another for sms

Hi There
I got my Z1 two days ago and is beginning to get use to it. (very nice phone)
However
There are one thing i miss from my iPhone and that is different notification sounds
Is it possible to use a sound for SMS/MMS and another for email and another other things?
Regards
Michael
Solved!
Go to Solution.

You can have diffenerent SMS tones to other notifications without extra apps.
To change just the SMS tone goto the SMS (messaging) app, press the 3 dots in the top right and select settings. Select the Notification Tone menu item to change the message tone.
You can change the other notifications tone by going to the Settings icon in the main menu and going to Notifications within Sounds.

I have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.

One solution for Apple TV losing connection to its iTunes Library

In 2012 I bought an Apple TV3 to let me use the AirPlay features of my New iPad with my HD TV. All worked fine and still does. Later in 2012 I subscribed to Netflix and enjoyed streaming movies to my HD TV via the Apple TV. Having had such a good experience with it so far I bought another for our bedroom TV and another for a relative, hoping they would have the same great experience with it.
Both of my Apple TV units at my house have worked flawlessly since installing them. We can start watching a Netflix movie downstairs then go upstairs and carry on where the movie left off.
At my relative's house the experience was not so flawless and has resulted in about 2 months of frustration but happily their AppleTV3 is now also working as expected. It has been quite a journey to get to this point and had a surprising solution.
I am the 'go-to' person in my family for these things so I installed the Apple TV for my relative.
My relative has a Windows XP (SP3) PC running the latest iTunes (11.0.2), a BTHomeHub 2 router, connected by WiFi to the Apple TV. The PC was connected by ethernet cable to the router. I installed the Apple TV, set up the hdmi connection to the HD TV, connected it to the WiFi network, upgraded to the latest iTunes on the PC, added the Apple ID for Home Sharing to iTunes and the Apple TV and could connect to the iTunes library on the PC, all good so far. I could play video or music or podcast or view photos from the iTunes library on the PC but after a short time (a few minutes or so), if I tried to play a different video or music track the I would get the familiar spinning icon and the Apple TV would not play the media file. Often the Apple TV would still show the contents of the iTunes library but would not play anything from it. When it was in this state it was still possible to play iTunes Trailers or Purchased content or a Youtube video or display photos from my library. This proved it was still connected to the internet and to some extent my library on the PC because it could display photos.
Initially I thought it was a WiFi problem as that was how the Apple TV was connected to the router. So as I already had a Powerline ethernet link running from the router to the TV for the Humax Freeview box for the BBC iPlayer, I ordered a small network switch to share the Powerline ethernet cable with the Apple TV. However the same drooping connection problems were apparent. I tried changing the QoS settings on the Powerline link, tried to prioritise TCP or UDP or both , but no improvement. I decided to abandon the Powerline link in case it was 'too slow', perhaps that was the issue.
I tried one of the Apple TV units from my house, where they were working fine and I got the same problem, at my relative's house it behaved like their unit, it would connect play a movie (all the way through if we let it) but after a few minutes if trying to play something else it would not play anything further. I tried their Apple TV at my house and it worked there, so the unit was not at fault.
At various times while troubleshooting these problems I have unistalled iTunes, reinstalled it, uninstalled Bonjour, reinstalled it (it comes with iTunes), searched the registry and cleaned it (Warning: do this at your own risk as you risk destabilising Windows), I have tried disabling my firewall on the PC and/or on the router, uninstalled the Antivirus / Firewall software (Norton) on the PC, I have added the Ports required for the Apple TV to my router and firewall software, I have read many, many forum posts about what has worked for other people and I tried them all in various combinations.
I decided having tried the above that the problem must be the Windows PC, so I swapped it for a few days with a laptop, connected wirelessly to the router. I had an iTunes library on the laptop so I shared it with the Apple TV and stopped iTunes running on my relative's PC. For a few days it actually worked, the Apple TV would play one movie/music track and I could select another and play it after a few minutes, a partial solution had been found except the laptop was needed elsewhere and I wanted the Windows PC to be the source for the iTunes library. I briefly considered suggesting they should buy a modern PC or Mac as their Windows PC was around 9 years old, may be that was the problem? This would have cost around £400+ and was out of the question. Fortunately I had a spare PC and I decided to swap it with the Windows PC, it was only a couple of years old and as such it must be 'better' I thought. Swapping one PC with another and transferring e-mails and documents etc. took quite a few hours but it was done. I uninstalled iTunes, reinstalled it and set up the home sharing again. This second Windows PC was running XP (SP3) and Norton 360 Firewall/Anitvirus software. I checked that after installing iTunes the Program rules in Norton were allowing the TCP and UDP communications expected by the Apple TV, I noted these were not specific ports but all TCP and all UDP communications were allowed. All of this met the recommendations that other posts had suggested. I tried it with the Apple TV but no, exactly the same problem, the iTunes library could not be found after a few minutes.
I found that if I restarted the Apple TV it would connect and play a file (movie/music etc) but if I played an iTunes trailer or just waited a minute or so then it would lose the connection. Another symptom would be when I landed on the 'Compters' icon it would tell me to 'enable home sharing on the PC with this Apple ID' , which I had already done.
If I tried playing via the Apple TV while selecting tracks from within iTunes on the PC, then sometimes the AirPlay icon was present or not present, sometimes worked and would then always not work until I restarted at least iTunes and the Apple TV, if not also the router or PC, whatever I tried it would not result in a connection between the Apple TV and the PC that would survive more than a few moniutes at a time.
Having swapped the Windows PC hosting the iTunes library with another I swapped the Apple TV again with one from my house, again same behaviour. So this suggested the problem was the BTHomeHub router as that was the only bit of hardware not exchanged. I compared its settings with the same unit at my house, I tried forwarding ports, I tried chaging the security from the default 'WPA & WPA2' to WPA or WPA2, still no solution. I tried reducing the default WiFi connection protocol from 802b/g/n to 802/b/g. I tried variations of all the other possible settings that could be changed but in the end set them to match the ones at my house. Still no solution. I considered buying an Airport Extreme or similar to link that via an ethernet cable to the router and enable it to be the WiFi access point for the Apple TV. This would have cost around £80 similar to the cost of the Apple TV itself, so was also dismissed as an idea.
I decided to restore the router to factory settings, this was done and I set up the WiFi connection again to the Apple TV, still no solution, same behaviour on the Apple TV. I decided it must be a problem with the WiFi so I tried a direct ethernet cable trailed through the house from the router to the Apple TV to eliminate the WiFi involvement, that would have to be the answer, wouldn't it? No, same problem.
I discovered some useful diagnostics along the way that are somewhat techie but worth persevering with as they could be useful for diagnosing what the problem could be. Find out on your router what the IP Address is for your computer that is hosting your iTunes library and the IP Address for your Apple TV. The IP address is essential for either device to connect with each other or the internet. The Apple TV IP address can be seen via Settings/General/Network, it has the form like '192.168.1.69' and for the PC it was '192.168.1.80', the values don't have a particular significance but the last digits after the 3rd dot will be different for each device.
On the PC (or Mac), open a Command (PC) or Terminal(Mac) prompt and try to 'ping' the Apple TV to see if you get a response
e.g.
c:\ping 192.168.1.69
or
c:\ping apple-tv
You should get a response indicating the number of milliseconds it takes for the 'ping' to be returned to the PC from the Apple TV , this will show that the PC can connect to the Apple TV, if it does not get a response then you should check that the PC and Apple TV are connected to the same network (either wired or wifi). You must be able to get a successful ping for the connection between the PC and the Apple TV to work at all.
Another diagnostic is to check the network status on the PC (or Mac)
e.g.
c:\netstat -an
This will show all the current TCP/UDP connections and also the local and remote IP addresses and ports. Look for the IP address of the Apple TV in the third column, there will be many rows returned so just concentrate on the rows with the IP addressses of the PC and the Apple TV
e.g. look for rows like the following:
TCP 192.169.1.80:3689 192.168.1.69:49123 ESTABLISHED
UDP 192.168.1.80:5353 *.*
UDP *.123 *.*
TCP Port 3689 is used by the Apple TV to communicate with iTunes for playing content. This connection is essential, there may be more than one 'established' connection to the remote Apple TV from the local PC.
UDP Port 5353 is used by the Apple Bonjour service to send multicast communications between iTunes and any iOS devices on the same network, such as the Apple TV, again it is essential.
Port 123 is used by Apple products to obtain the date and time, the UDP row above shows that any local IP Address can communicate with any remote IP address on the router's network and provide it with date and time information.
If your firewall software on the PC is blocking any of these ports then the 'netstat' command is useful to see if you need to unblock any. In my experience, this port unblocking was not necessary as when I installed iTunes, the Norton software automatically set up appropriate rules for the iTunes program, and opened the required TCP and UDP communications as iTunes needed.
Likewise, on the router itself, I have the UPnP setting enabled and this allows software like iTunes and Bonjour to traverse the router's firewall without it being necesssary to explicitly set the ports to be forwarded.
If I started the Apple TV, and ran the 'netstat -an' command over the next few minutes I could see the number of rows for the Apple TV diminish, and this was a symptom of the dropping connection problem.
Ultimately having replaced the Apple TV with another 'working' one , swapped the PC, restored the router to factory defaults, disabled the Windows or Norton firewall, tried ethernet and WiFi connection between the router and Apple TV it struck me that the only component I had not considered was the insignificant ethernet cable linking the PC to the router. This has been present since the router was installed for the original PC around 4 years ago. But surely this was how the original PC and the swapped in PC were getting to the internet quite normally and successfully? Also this was how the Apple TV was accessing the PC via WiFi then via the router through this ethernet cable, there was no way it could be the cable, cables don't allow a connection for a short time and then cause a timeout can they?. Thus, confused, and with all other avenues explored, I removed the cable between the PC and the router and enabled a WiFi connection from the PC to the router. After restarting the PC, Router and Apple TV, just to be sure, I tried the Apple TV again.
I could play some music on the Apple TV from the iTunes library, I could play it for a minute or so and then go to movies and play a movie from the iTunes library. I tried to play an iTunes trailer, some YouTube videos, these worked as usual. I then went back to the library and yes, I could play another music track or another movie. I forced the Apple TV to 'sleep' via Settings/General/Sleep Now and tried again, I woke it up and could play any music or movie from the library. Elated, I went out for meal with the family, nervously hoping throughout the meal that the solution had been found. After a couple of hours we returned, woke up the Apple TV and yes, oh yes!, it would connect with the library and play a succession of music or videos without seeing any dropped connections. Several hours later I could wake up the Apple TV again and select any content from the iTunes library on the PC and play it, finally the unit is behaving as I would expect.
This solution may not apply for all, but it worth following all of the components in the path between the Apple TV, router, computer (either PC or Mac) and the iTunes library and checking that each is able to commmunicate successfully and over a period of time reliably so that the Apple TV can perform as flawlessly as it is capable of.
Don't, as I did expect the solution to involve a complicated series of special settings of ports or communications protocol changes. Do perform a clean install of iTunes and keep it updated, do keep Firewall settings simple and let the settings be default settings, do rely on UPnP (Universal Plug and Play) on the router. Let the router select which channel it wants to use, it will select the channel with least interference...and check out that insignificant ethernet cable if you have one. It might work fine for general communications from the computer to router to the internet but it can be a source of connections dropping on the Apple TV!
My relative is now a happy Apple TV user too.

Useful to watch what is happening to the TCP/UDP connections when the Apple TV is connected to iTunes and when it is actually playing some media from iTunes and when it stops playing.
To see this, use the Network Statistics command 'netstat' from a Command prompt (Windows PC) / Terminal Window (Mac):
e.g. for Windows:
c:\netstat -an 5
This repeats the netstat command every 5 seconds, use Ctrl-C to quit the command. (Use 'netstat -h' for help with this command)
While iTunes is running there will be a number of TCP records displayed for the computer's IP address using port 3689, showing at least 3 ports in use for the Apple TV's IP address.
i.e.
TCP host_ip:3689 apple_tv_ip:49187 ESTABLISHED
TCP host_ip:3689 apple_tv_ip:49196 ESTABLISHED
TCP host_ip:3689 apple_tv_ip:49255 ESTABLISHED
When it is playing content there are more connections established, some of these rows will gradually disappear when the media file stops playing. These addional TCP records show iTunes using different ports from 3689, but only while media files are being played.
When a video file is played, (on this Windows PC at least) the iTunes host is using ports 4463 and 4464, with the Apple TV using port 7000. When playing a music track or podcast, the iTunes host is using port 4472 or 4489 and the Apple TV is using port 5000.
When the media is playing, the fourth column returned by the 'netstat -an 5' command : 'State' shows as 'ESTABLISHED' and shortly after the media file is stopped playing it shows as 'TIME_WAIT' until the record disappears after a minute or so.

My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
Along with the original poster, I'd appreciate any help.
As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

Why do I lose sound when I try to make a dvd from imovie to idvd. The sound is all there in iMovie, but when I make my dvd, I have sound for about 3-4 minutes and then its gone.

I have made a 1 hour 30 minute dvd in IMOVIE. The video and the sound are perfect. However, when I make it into a dvd on IDVD, I lose sound after 3 or 4 minutes. Any Suggestions?

Hey MichiganMan32,
I found an article that looks like it applies to that audio issue you're experiencing. Check out the following troubleshooting steps here:
Resolution
Make sure the audio track has not been muted in the timeline.
Switch to timeline view by clicking the clock button in the iMovie window.
There are three checkboxes on the right side of the iMovie window underneath the sound icon. These checkboxes correspond to the video track and two additional audio tracks. Make sure all three tracks are selected. Any deselected tracks are muted.
If you are using iMovie 3 or later, check the "Edit Volume" option to see if it is selected. If so, make sure the volume of the affected video clips is not set to its lowest level, or try deselecting the option to Edit Volume.
See if the volume in iMovie is set to its lowest setting. Directly under the Preview pane in iMovie is a volume slider. Set this slider to maximum volume.
Make sure the computer's audio is not muted.
Quit and reopen iMovie, then check the clip to see if it now plays with audio.
Check to see if any of the video clips you have imported are in the MPEG-1 format. MPEG-1 clips will lose audiowhen you export them as part of your iMovie project.
Quit and reopen iMovie, then reimport the footage from the camera. Play the newly imported footage and see if you now have audio.
If you are using an analog to DV converter instead of a camera, make sure the audio connections are good between your VCR or other analog device and the converter. Check the documentation that came with your converter for more information.
Check /Library/QuickTime/ and ~/Library/QuickTime/ for any third-party plugins. Remove them if present, log out, and log back in. Check to see if the issue persists. If not, check with the manufacturer of the disabled plugin to see if an update is available. Note: The tilde (~) represents your Home directory.
Note: "Apple Intermediate Codec" and "QuickTimeMPEG2" are Apple components. For more information about a particular plugin, select the item in the Finder and choose File > Get Info. Look at the version string of the Get Info window to see if the plugin developer name is listed.
iMovie is missing audio on import, export, or playback
http://support.apple.com/kb/ts2289
Cheers,
David

Two earlywatch reports for same instance in one Solution manager

Hi
i am trying to create two solutons for early watch reports for same instance. let me explain here.
In SAP Solution Manager: Active Solutions >>> i have two solutions like this
Solution                                                          Early Watch Alert Reports
Avnet Global Solutions         >>>> here i have configured the PR1, PB1 PCB instances
PR1                                      >>>>>here i configured the only PR1 instance.
so i have configured the same instance in two solutions.
i am not gettting the early watch report automatically after after configuring like this . but manually working fine.
when i kick of the report manually working fine.
here my question is ... do i can create two early watch reports in one solution manage for same instance or not. if yes then why i am not getting report automatically.
Thank you
Vish

Dear Paul,
Thank you for your response
this is what i got from SAP.
Hello Vish,
You can have the same system in different solutions. With regards
to why the report is not generating automatically, please review
SDCCN on the satellite system.
I dialed into the system and found that the SDCCN for PB1 is not
downloading the sessions from Solution Manager.
I would recommend that you deactivate and then activate SDCCN.
Tcode SDCCN -> GoTo - Settings - Task Processor - Deactivate
Tcode SDCCN ->Utilities -> Activate
Then create a Refresh Session task and verify if the upcoming sessions
are getting pulled down to PB1.
If you need help with this, please let me know if it is fine with you
if I make the necessary changes to get the system working.
Thank you in advance and best regards,
Jared Singh
SAP Active Global Support - Netweaver Web Application Server
could i know your comment

I just recently purchased an iphone 5s and today my speaker located at the rear end of my device is not sounding clearly, it sound muffed and blurry. Is there any way I could get a new one or get this fix for free?

I just recently purchased an iphone 5s and today my speaker located at the rear end of my device is not sounding clearly, it sound muffed and blurry. Is there any way I could get a new one or get this fix for free?

Hi Jayliin,
Take it to the Apple Store where you purchased it from. It is still under warranty. They will replace it if necessary.
Cheers,
GB

One SOLUTION for "self assigned IP address"

Hello there, dealing with the nasty issue of "self assigned IP address" has been my latest two days nightmare, I tried lots and lots of solutions I read in forums here and there without getting to a point.
I started this post because I want to post here a solution that really worked for me and I haven't seen it posted over the web.
I don't remember where but I saw the comment that WEP encryption by the router is not very mac compatible as opposed to WPA. So a while ago when I entered my router home screen (Thomson TG585 v7) I saw the option to enable WPA-PSK encryption and went for it, I can tell you it inmediatelly got me online and till now my airport wireless conection is working perfectly.
I'm not any mac/web guru and maybe I'm stepping some technical details but I want to share this tip with all of you because I know it can be a really nasty problem that one of the gat dam "self assigned IP address" and this may help somebody else. ;-)
Best regards
Luis Erantzcani

Great tip Luis, thanks!

One Solution For No Sound for imovie on Export to ipod from QT

Similar Messages

Maybe you are looking for