One speaker cut out.... then the second a few hours later. Now both don't work.

HP Pavilion G6 Notebook PC
A9Y51EA#ABE
[Personal Information Removed]
I lost sound to my left speaker and a few hours later my right one also just stopped too. Tried restart and didn't sort the problem, have not changed OS recently or anything. Just popped away! Any advice? Getting sound perfectly from headphones.
- Daryn

Hello daryns87,
Please take a look at this document and let me know if the troubleshooting steps help resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • HT202663 AirTunes cuts out at the same time every hour for about 20 seconds

    Since converting my iMac from Lion to Mavericks a week ago, my Airtunes network dies at exactly the same time ... 51 mintes and 35 seconds every hour after the hour. It stays down for 20 seconds then picks up again without any intervention required. (iTunes itself does not stall).
    My wifi network set up worked reliably for about three years before upgrading to Mavericks, streaming music from iTunes on my iMac to two AP Expresses and one AppleTV. I have an Actiontec router provided by Verizon/FiOS. The iMac is connected to the router via Ethernet.
    The apparently precisely timed interruption problem manifested itself immediately after installing Mavericks.
    Anybody else have anything like this?

    I fixed the problem. For anyone interested I disabled the IGMP service in the Actiontec router.

  • If I didn't configured my iPhone 5 when I turned on the first time, I put later, now I don't know how to configure it, how can I do it?

    I cannot configure my iPhone 5 for the first time

    I think it is the set up assistant. It's the first thing that appears when you turn on the iPhone , i have not cellphone signal and my sim card is already in.
    You know how can I re open that assistant?

  • HT1420 I purchased and downloaded and album of ten songs. most of the songs cut out after several seconds. How can I get them again without having to re-purchase???

    I purchased and downloaded and album of ten songs. most of the songs cut out after several seconds. How can I get them again without having to re-purchase???

    Delete the problem song(s) from library including file(s). Then go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Select Music tab to re-download again for free.

  • TS1717 When in the iTunes Store and listening, tunes cut out after 15 seconds of play. Anyone know what is wrong? Windows 7 system and I've got latest iTues software.

    When in iTunes Store sample tunes cut out after 15 seconds - would be nice if I could listen to the entire sample play. I'm using Windows 7 and have latest iTunes software. Anyone have a solution?

    I had the same problem,  finally found a similar question on here and what resolved it! Hope this works for you..
    1st:click START
    2nd: ACCESSORIES
    3rd: RIGHT CLICK on COMMAND PROMPT  *a window will pop up..which will say "Run as Admin."  ..you must put in Admin. password*
    4th: CLICK CONTINUE
    5th: *a black screen then comes up..and from where the words end (it's blinking)...continue from there... simply type
    ipconfig/flushdns    ...then it the ENTER KEY
    Let me know if this works for you. Good luck.
    MistyBlues

  • I bought a song on itunes but it cuts out after 14 seconds on my laptop but on my ipod it plays in full, how can I rectify the tune on my pc, thankyou

    I bought a song on itunes but it cuts out after 14 seconds on my laptop but on my ipod it plays in full, how can I rectify the tune on my pc so that I can play it in the house and put it on a cd for the car. I went into the itunes store to play the tune and it cuts out there too. thankyou

    Hello there, La Clairiere Feerique.
    I understand you are having issues with playback of a purchased song. If iTunes in the Cloud is available in your country, it might be best to delete the song from your computer, then re-download from your purchase history.
    To delete a song the following Knowledge Base article offers how to delete from your iOS device:
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Music
    Open the section below for the device you are using.
    iPhone, iPad, or iPod touch
    Mac or PC
    Before you delete, find out if you'll be able to download the song you deleted again (it depends on where you live). To delete a song:
    Launch iTunes.
    From the Library pop-up menu, choose Music.
    Click Songs in the navigation bar.
    Click the song you want to delete.
    Press the Delete key on your keyboard.
    In iTunes 11, the album cover art will remain visible, but a cloud icon will appear on it to allow you to download the item again (in countries that support this).
    Note: If you didn't purchase a song from the iTunes Store, you won't be able to download it again for free from iTunes in the Cloud. You might want to back it up somewhere on your computer.
    Afterwards, re-download the purchases from your purchase history:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Does any1 have any idea what the problem is?

    Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Happens with charger plugged in or not and green charge light stays on even when it cuts out and cant be turned on! Does any1 have any idea what the problem is?

    Try SMC and PRAM resets:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/ht1379
    Ciao.

  • What's the easiest way to cut out about 20 seconds (in the middle) of a minute+ vid that i made on and downloaded from my iPhone 6

    Hi - I'm a vid beginner, actually have a training session tomorrow at an App Store, but for now...what's the easiest way to cut out about 20 seconds (in the middle) of a minute plus vid that i made on and downloaded from my iPhone 6? I I'mported the clip to iPhoto on my new Macbook pro. The TRIM function in iPhoto seems only to want to let me cut from either end. I guess if I do cut out a section in the middle, maybe 'glueing' the sections back together is too much for iPhoto to handle (?). I spent about 10 minutes just trying to (unsuccessfully) import to iMovie, so that aint working either. Quicktime maybe? Thx for reading

    Hey jabXhook,
    Thanks for the question. You may have already received your answer from the Apple Store yesterday, but iMovie is definitely the way to go if you want to trim or split clips. Check out the following resource:
    Trim, split, and move clips - iMovie Help
    http://help.apple.com/imovie/mac/10.0.6/#/movf8b8fc9b2
    Trim unwanted frames from a clip
    1. In the timeline, select the range of frames you want to keep in the clip.
    2. Control-click the clip, and choose Trim Selection from the shortcut menu.
    The clip is trimmed to the boundaries of the selection.
    Thanks,
    Matt M.

  • Every time i try to connect to firefox a message says the connection is untrusted, when i click get me out of here it goes to another firefox page and the it opens ok firefox opens as http first and then the second time it opens as https

    help every time i try to connect to firefox a message says the connection is untrusted, when i click get me out of here it goes to another firefox page and the it opens ok firefox opens as http first and then the second time it opens as https

    hello adzuki45, you already appear to run the latest version of firefox, so this shouldn't be a cause for concern, maybe your desktop shortcut is just misnamed).
    when there's a problem with installing flash, please see if it works with the full installer that is available at http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#main-pars_header

  • Audio on keynote exported quicktime videos cuts out at 50 seconds?

    It just started!  When I export my keynote into a Quicktime file, the audio cuts out at 50 seconds.  I have been creating videos a long time with this method and never had problems before.

    I am willing to share files with Apple. Mine are copyrighted, but are shareable.
    But here's a wrinkle on the problem that puts me a little more in sympathy with Apple engineers, since they may well not have encountered the subtle environments we have that is generating this audio problem.
    I was having the same problem you are for several days after I upgraded to Keynote 6.5 and Yosemite 10.10 (running on a mid-2011 MBA). I duplicated a keynote file with audio recorded that cut out after 50 seconds or so: audio stopped on slide 2 even though I had recorded and saved the whole 50 minute presentation. I store my keynote presentations along with Quicktime movies (m4v) and downsampled mp4 files in a sparsebundled disk image. I created a new, larger disk image yesterday because I was running out of storage space. To do that, I copied all the files in the sparsebundle to a temporary folder on a backup drive (My Mac Book Air is running out of storage space). Then, I deleted the old sparse bundle, created the new one, and copied all the files back.
    After reading your latest post, I thought I would try again. I opened my test Keynote file, now copied to the new sparse bundle, and the audio works! I can hear the audio in the Keynote file when I "Play Recorded Slideshow" from the Play menu. I also exported to a Quicktime m4v movie and the audio is all there. The Keynote file size didn't change during all this: still 36.8MB, which is typical for the audio recorded ones. I start with a 2 to 4MB presentation of 15-20 slides, record audio, and the file size increases to 35-40MB. Then the Quicktime m4v is typical 200-300MB. This one is: 239.4MB.
    So, although the bug is not squashed, take heart and don't delete those files! Your audio may actually be in there somewhere.

  • 2ndgen shuffle cuts out all the time

    My shuffle worked great for a month. But now, while I'm running, either the sound cuts out or the unit stops playing - I haven't been able to figure out which. When this first started happening, I could get it to play again by pressing the play button - it was as if it had paused itself. But now, I have to do all kinds of things to get it going again and I really haven't been able to figure out what makes it start again. I turn it off and on, I pull out the headphone jack and put it back in, I toggle pause/play, and eventually one of those things gets it going again. It's really annoying and I have no idea what's wrong. I'm tired of going to the apple store - I just had to recycle one iPod and then exchange the replacement iPod (which didn't work) for this Shuffle. Anyone have any ideas about what's going on? Thanks.

    My shuffle worked great for a month. But now,
    while
    I'm running, either the sound cuts out or the unit
    stops playing - I haven't been able to figure out
    which. When this first started happening, I could
    get
    it to play again by pressing the play button - it
    was as if it had paused itself. But now, I have to
    do
    all kinds of things to get it going again and I
    really haven't been able to figure out what makes
    it
    start again. I turn it off and on, I pull out the
    headphone jack and put it back in, I toggle
    pause/play, and eventually one of those things
    gets
    it going again. It's really annoying and I have no
    idea what's wrong.
    Where do you clip the Shuffle when you run? Is it
    possible that it is getting moisture in it? Or the
    controls get bumped? Do you know about disabling the
    controls by pressing PLAY/PAUSE for about 3 seconds?
    Thanks for the suggestions. It's definitely possible that it's getting moisture on it, and I did not know about disabling the controls. I'll give that a shot and also watch out for moisture.

  • Songs cut out in the middle

    On several different files downloaded from the iTunes store, the content cuts out in the middle. The song will be going along, playing normally, then there will be anywhere from several seconds to several minutes of silence before the song begins to play again. The progress bar in iTunes window continues on counting off seconds/minutes as if playing normally, but no sound comes out. There doesn't seem to be any rhyme or reason to which files are doing this. I have entire albums where there isn't a problem and others where it happens on one, two or more files. It occurs across different devices. How can I re-download the files to see if this fixes the problem? Thanks

    You can delete a track by selecting it and pressing the delete key. Confirm that you want to move it to the Trash.

  • Problem with Cross Dissolve: The video cuts out during the transistion

    I'm encountering a problem with the Cross Dissolve transistion wherein during the period in which the transition should be happening the video instead drops out.  There's plenty of heads and tails available on both clips, but as soon as the timeline hits the start of the transition "from' clip cuts out, revealing the background or black if there's no background underneath and then the "go-to" clip cuts in at the end of the transition.
    Any help would be appreciated.

    I've been having this issue and it's driving me crazy.  It's random, that some cross dissolves work, and others don't.  Seems to affect AVCHD footage.  Adobe seems to be aware of the issue.
    The work around that I've seen posted by a forum user "Mitch W" is to apply a GPU accelerated effect to one of the clips in the pair.  The effect can be turned to "0" so as not to alter the video.  The act of doing this, makes premiere see the clip differently, and render the cross dissolve correctly.
    Fast Blur, set to "zero", seems to do the trick, and allows it to work with CUDA acceleration turned on.  I did notice that the work around was broken by changing the playback resolution in the viewer window.  In that situation, I had to apply the GPU effect to the other clip in the pair to make it work again.
    I don't know what will happen if I change my playback resolution again...

  • Audio cutting out at the end of my video

    So I exported a AVCHD video into an uncompressed AVI and then re imported it. I brought it into the time line and edited it a bunch and also brought in another video and mixed that in. For about half of the video, I used the audio from the video itself... but in different sections, I brought in a separate wav file. I used this wav file towards the end of the video for about 1 minute of the video. After I was done, I exported the entire project into a normal avi file because what I'm going to do for now is upload these to YouTube and so I don't want the file sizes to be too huge.
    So I opened up the final avi file in VLC player... and everything is great... except the last 30 seconds or so of the video doesn't have the audio. It plays the audio from the wav about halfway through... and then it stops. The video continues... but there is no sound.
    I went back into the project and everything looks fine. The wav file extends to the end and the audio plays fine when I preview the video. So I exported again just to see if it was some sort of error the first time... but no... it did the same thing.
    So why is the audio cutting out at the end? How do I fix it?
    Thanks in advance.

    Ok I figured out how to do a better quality MP4. However I had two problems. 1... the quality isn't near as good as the AVI. 2... now the audio cuts out in even more places instead of just the end. It seems that the .wav file I imported is causing the problems. In the AVI, the wav file cuts out at the end. In the MP4, the wav file cuts out in the middle AND at the end. I don't understand why this is happening. The wav file plays all the way through normaly, and it also sounds find when I preview the video... but when I encode it... it cuts out in places regardless of the format. Is there some step I'm missing in the process to make sure the audio is all in place?

  • Airplay and airfoil cut out all the time

    Whenever I stream music from my mba via either iTunes or AirFoil to my speakers the sound will cut out all the time.  If I switch the sound output in sound preferences to the airplay speakers then everything works fine and there's no cutting out.  How can this be fixed so that I don't have to change the system preferences everytime I want to play music to the airplay speakers?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can check for problems with the places.sqlite database file in the Firefox profile folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file

Maybe you are looking for

  • IF CONDITION IN BEx

    Hi bw guru's     i need to write the IF condition in BEx reporting.. IF PAID AMOUNT = 0 THEN DISPLAY THE RATED AMOUNT i need to write the above condition in reporting level can any one help me out on this ... thanks and regards Uma reddy

  • No Funding Error while generating Revenue

    Hi there, While generating Revenue for a project, we get a no funding error. There are actually multiple agreements for the Project and there is enough funding for the event across all the agreements but not against any one of those. What is the best

  • Can another user post messages using my id and password

    How can I check whether messages sent using my Log in account and password were Posted from another machine?

  • Finding a combination of data in several rows and on the same column

    In a table I have two cloumn ID and ID6 that repersent joined account that have several partners ID for example: ID ID6 ====== =========== 11215 6100 11152 6100 11242 6101 11523 6101 11125 6101 11254 6101 there is about 60,000 rows I have a table wit

  • Replacing jar files real-time in classpath

    Hi All I have a swing application and It runs perfectly. I have created a update manager that can download jar files for the application. This update manager downloads jar files and replaces the jar files that are currently in the class path. You cou