One step and two step returns
Hi Guru
Can any body tell me what is the processes in a one step return and a two step returns. and why is it used?
Thanks in advance,
Manu
Log out or reboot and try again.
Similar Messages
-
POSDM Diff Between : One Step and Two Step Processing Tasks
Hi All,
Can you pl give some points on difference between "One Step and Two Step Processing Tasks in POSDM ??
Thanks!!Please consult the SAP Note 980272 on the service marketplace. It gives a detailed description of the difference.
-
Do any of the location and two-step authentication services work without IPOD WiFi?
IPOD Touch 4g, IOS 6.01
I signed up for two-step authentication but I now realize that all the necessary location services only work through WiFi.
I don't use WiFi at home and only connect my IPOD directly to the PC whenever I want to use Itunes or manage it.
Is there any process to setup location services and two-step authenticate through a PC internet connection?
ThanksI think you are going to find the WiFi saps that good life right out of it -- it will also run hotter with WiFi on.
I did some informal testing on this myself... the best battery life I get is with WiFi turned off and only turned back on when needed to surf the net. I use EDGE for e-mail.
Today was my first "real use" day... It charged last night and was fully charged this morning. I texted quite a bit. I sent a bunch of e-mails. I called my husband via bluetooth. My daughter called several times to check in. I called a few work contacts for brief convos. I browsed the internet for about 15 minutes. Made an appointment in the calendar. Showed google maps, weather, stocks, and safari to a friend (using EDGE). Now tonight, safely back at home, I still have about 70% battery remaining.
Any day I had WiFi on all day I barely got through 12 hours before it needed to be charged. Last night when I was intentionally running my battery down I turned on WiFi. Starting with a battery charged about 50% I browsed with WiFi for 3-4 hours and the phone died.
I do keep bluetooth off too unless I'm in the car, but honestly, I think it's really the WiFi that is the biggest battery draw. -
Report with two Command is empty if one of the two commands returns no data
Hi all,
I have a report with two Commands not linked together.
If ONLY one of the two Commands returns no data, the full report is empty (although the other Command returns data).
I'm using Crystal Report 2008 and the CRJ 12.2.205
Have an idea?Hi Ted,
how can I solve the problem, please? It is important.
If I can help yourself, the problem is appeared in many reports since I updated the library (the old library version 11.8.4.1094 works fine with all). I'm waiting for your answer, please.
Thank you very much. -
Hi All,
I have a scenario in which there is only one outbound Message interface and 2 inbound message interfaces ( one sender and two receiver). In XI, how can i configure the interface determination for this? Shall i need to put * for receiver and add 2 inbound message interfaces and interface mappings.
Thanks
MichaelUse xpath in your interface determination in case you have some conditions, else u can *** multiple interfaces in your int. det.. also ref:
/people/suraj.sr/blog/2006/01/05/multiple-inbound-interfaces-within-a-service -
I have one Iphone, and two computers. They both have different purchases on them. One is older than the other. and one was my moms. How do i get the ringtones off of my computer and onto my moms computer to use all of them on my Iphone?
Copy them to a cd/dvd/flash drive/external drive/etc, then to the other computer.
E-mail them. -
In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?
Yes but the iPhone chargers will struggle to charge the iPads ,they need more power than the iPhone chargers produce and with an iPad will charge VERY slowly
The iPad chargers whether 10w or 12 will happily charge all your devices and Apple confirms the compatibility on the relevant web page. -
We have one iPod and two iPhones; we have been unable to transfer our music from the Ipod via iTunes to the iPhones, please assist.
did you right click the ipod/iphone and click transfer purchases
-
Trade-off between the one-arm and two-arm WAE designs
We are configuring a WAE (model 512) for a branch office and I was wondering if someone could please tell me the trade-off between the one-arm and two-arm WAE designs..
thanks..
greg..if you are using WCCP then the WAE becomes the client withing the servcie groups 61, 62. In order to accelerate both vlans then apply the ip redirect 61 in on the client vlan ineterfaces to the one interface.
If inline, you can use both 2 port groups for each client interface or trunk all to a single inetrface and configure which vlans you would like to accelerate.
Now in terms of of using both GE inetrfaces, I would have to check. A topology diagram would help -
Hash with one key and two values
Hello,
In java can i have a hash or similar data type than can have one value and two keys?
thanks,
jdEh, I'd avoid arrays, personally.
The reason why is that in my experience, once you start doing things like this, you end up adding an arbitrary number of additional elements for each key. Fixed-size arrays would be a pain.
If you don't want/need to create an object that encapsulates the two values, why not just use a java.util.Collection as the value in the hash? The Collection -- say, a LinkedList (you decide) -- would hold the two values you want associated with the key. -
One job with two steps - how to create one single spool?
Hello experts,
I have created two queries in SQVI. One is based on the table BSIK, the other on on BSAK.
The report layout is the same in both queries.
Now I schedule one job in SM36/SM37 with two steps corresponding to my queries.
I want my second step to append the spool created in the first step. Is that possible?
In order to do this I unchecked "New spool request" in the request attributes for the second step of the job.
I use the same printer, the same format (X_65_80), but it doesnt work.
The help on the field says
".... name, output device, number of prints and the format must match..." - What "name" do they mean?
"In addition, the existent spool order must not already be competed. This can occur if a spool is released for output...." - I use "send to SAP spooler only" option, is that what thay mean? How cen you have an "uncompleted spool" in the job.
If anybody knows ho to do this (without development!), please advise
Best regards,
FatimaHi,
Please do following steps :
1. Go to transaction code SM36
2. Do as per below screen shots
You can see Job steps is empty
Click on (Check and Save)
Next Screen
You can see one step created
Click on Create
You can see above it is showing as Step 2
Give again program name and variant
Click on (Check and Save)
You can see two steps are created
Go back (green arrow)
You can see know SAP is showing 2 Step(s) successfully defined which was earlier blank
Click on
Next Screen
Now schedule job as per your requirement.
Prerequisite create variants for both the programs as we need to mention the same .
Hope, this solves your issue else revert.
Regards,
Tejas -
Two step and Single step Reservations
hi
am bit confused with the following.
can anyone tell me why cant we use the Reservations for the two step procedures for stock transfer and why for single step procedures?
regardsHi,
It is a very good question and one that is not that easy to answer (and it <u>should</u> be easy).
I have tried to figure out why this should be the case and I cannot think of anything concrete.
perhaps it relates to the use of in-transit and in-transfer stock, perhaps the system cannot cope with reservations that affect these transit stock areas? I don't know why it cannot cope with these but perhaps it relates to the ability to trace reservations from within transactions such as MMBE etc. perhaps it is too difficult to show a list of reservations that are increasing in transit stock?
Sorry i can't help a lot with this, but the above is the only thing I can imagine would be the reason?
Steve B -
LT45 (Picking Progress) and Two Step Confirmation
Dear all,
I have Two Step confirmation in place for one WM movement type and I am happy with it.
We also use Multiple Processing for Deliveries. As a result, the Groups created by this process are used to monitor the Picking Progress in LT45
In LT22 or LT24 there is clear distinction between Open TO's, Confirmed TO's and half Conirmed TO's (yellow triangle.
Much to my disappointment I cannot see such a distinction in LT45.
Is there a way or another Monitor available that does show me the different statusses? A yellow bar if the group is half confirmed is too much to ask, but an alternative would be nice.
Thanks!
SandeepAnanthram,
Thanks for reading my Question.
I am talking about TO's that use Two-step Confirmation. In LT22 / LT24 they show as Yellow Triangle, as you know this means half confirmed.
As you know in LL01 they don't show as yellow but as red, just like in LT45. So this is very misleading.
Can you tell me a place where I can clearly monitor my Picking Progress and see a distinction between Green, Yellow and Red
(Confirmed, Half confirmed, Open)
Thanks again for taking the time.
Sandeep -
Alta mail and two step verification not working
Hello how are you all?
I am trying to use AltaMail, v5.2 in my Ipad mini with 2steps verification
It worked fine without the 2 step verification.
But now that I have reactivate my 2 step verification My Ipad apps AltaMail keep stating wrong password for my Gmail account .
I have created an application-specific passwords in Gmail google and entered the password given to me in my AltaMail Gmail account password box but still still doesn't want to connect...... reason wrong password
Contacted app company, but they too although nice seemed a bit lost
any ideawell, yes, but it let me do the iPad and iPhone
and isn't the problem you mention that there is a flaw in the "reset my Password" function, which is not two-step verification.
the 3 day waiting period was always intended for people who have recently made changes to their account, and I think is not part of the concern over the Reset flaw.
I did not have to wait 3 days for the iPad and iPhone to work.
I am able at this moment to have it send the unlock verification code to my iPad. I believe two-step verification is currently up and working, except I can't get it turned on for my mini.
I could be wrong -
One instance and two databases?
Hello, I've installed oracle database on my server. I've read a lot of documentation to learn the basic concepts.
Ok, I have a question. I have read that one instance only can manage ONE database. Is it true? If it's true, how on earth I can create two database? for example, I want to create database-one and database-two.
I would create these with CREATE DATABASE command. How does Instance know if I want to access to database-one or database-two. How I indicate it in initilitation parameter file of my instance?
In sumary, Can one instance works with two databases?Look at the following output. If I do not set my ORACLE_SID variable, the 9.2.0.7 client connects to the 9.2.0.7 database instance. If I set my ORACLE_SID , the same 9.2.0.7 client now connects to the 10.2.0.1 database (the database specified in the ORACLE_SID variable).
C:\>set ORACLE_SID=
C:\>sqlplus kkishore/kkishore
SQL*Plus: Release 9.2.0.7.0 - Production on Mon Jul 17 09:27:55 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
SQL> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
C:\>set ORACLE_SID=ORA10GR2
C:\>sqlplus kkishore/kkishore
SQL*Plus: Release 9.2.0.7.0 - Production on Mon Jul 17 09:29:31 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> disconnect
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>Message was edited by:
Kamal Kishore
Maybe you are looking for
-
I have a book in my library but when I went open to continue to read "failed to load book because the requests resource is missing"? Where is it.
-
Labview vs. Visual Basic
Currently we're trying to develop a new testing system to replace the older version that interfaces labview with older instruments. The new system will be mainly GPIB interface and the instruments are the top of the line Keithley instruments. There a
-
Have existing Dreamweaver site want to publish new Muse site into it
I have developed a web site and managed it in Dreamweaver I would like to put new pages including index page from Muse into this Dreamweaver site and from the new index (Muse) link it to the old Index Page (Dreamweaver) so there will be access to all
-
What is the .aplibrary file?
Many thanks in advance for your attention. i have backed up my Aperture Library mostly every time I add new photos - sometimes every few dayas - but every once in awhile - while this backup file is being created, another file is spontaneously created
-
AirPort does not detect networks, unless another network connection is made
I've just done a clean install of OS 10.5 to see if this problem was software related, but it persists. AirPort does not detect any network the computer is near (tested in various locations) normally, but when connecting to a network via Ethernet or