One Step at a Time

Since this is my first plunge into the world of the smartphone, it hasn't taken me long to figure out that for a rookie to get anything fixed, it's best to take one issue at a time. It's just like working with a computer....well, it really is a computer after all, you should only try to fix one problem at a time or you are apt to create more problems.

Apply for a second Capital One card. For best score growth you should have three cards minimum.

Similar Messages

Check/uncheck record results on more than one step at a time

I have one hundred plus sequence files and several thousand steps total. Checking and un-checking record results one step at a time takes a long time. I'd like to be able to select several steps at a time then check or un check the "Record Results" option for all those steps at once. How do I do this? I'm using TestStand 2.0

Hi Kevin,
Thanks for contacting National Instruments.
Do you want to disable result recording for ALL sequences on this station? If so, you can turn on this option in the TestStand sequence editor (Configure >> Station Options, turn ON checkbox "Disable result recording for all sequences").
However, if you only want to do this for selected sequence files, then Ray is correct - you would need to write an external routine that will automate this for you. Attached is a zipfile containing a VBScript that will iterate through one sequence file ("c:\test.seq") and change all steps (all sequences, including Main/Setup/Cleanup) to turn off "Record Results". It first saves a backup copy of the sequence file, makes the changes, then save
s the modified sequence file. You can enhance this script to work for more than one sequence file by using Microsoft's FileSystemObject.
The VBScript uses a DLL I created, which exposes the TestStand 2.0 Engine object as an ActiveX DLL. Before you can run the VBScript, you will need to register this DLL:
regsvr32 TSEngine.dll
Then, the VBScript can be executed just by double-clicking it. Hopefully this helps get you started toward creating an automated way of solving this problem!
David Mc.
National Instruments
Attachments:
ts2seqfiles.zip ‏4 KB

The little 'down' arrow that used to live next to the forward and back arrows in the upper left of the navigation bar, is missing. It was handy to use to go back in big jumps without having to go back one step at a time. Can you please restore it?

When searching through a website, covering many pages of information, sometimes you just want to jump back to a page.
Using the little dow arrow was a handy way to see where you have been and to jump multiple steps/pages backwards without continuing to click back, back, back, until finally reaching where you were. I really use it a lot and am hoping you will either restore it or provide me with a new way to do the same thing.
Thank you!
Maggie

The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

Taking One Step At A Time...

I've been lurking for a while, and taking heed to all advice given...before coming in Myfico, my scores were terrible---mid to high 500's. In April of this year, I pulled all three credit reports and began disputing incorrect information (I had 8 accounts removed off each report), which helped my score. I applied for a QS1 Capital One card in May and got approved (completely to my surprise!) for $500...I've been keeping my utilization low (under 20%) and my scores, once it began reporting on my reports, my scores jumped at least 65 points! I'm now in the low 600's across the board. I then took advice given here and, although I only had my QS1 for barely 2 months, applied for a CLI to help my utilization...I got approved yesterday for a $1000 increase! I probably won't post that much (I'm more of the lurking type, lol), but I just wanted to say THANK YOU. Also, any advice to help my score grow even faster is appreciated as well....should I obtain another card? Or garden?

Apply for a second Capital One card. For best score growth you should have three cards minimum.

One step at the time with DNS

Anyone who would be so kind and guide me trough the setup of dns on my LAN?
on my 5.th install now

ahh Camelot.. - just the one i hoped would answer.. (I can see you have answered many in here...)
Heres what i want to do: I want to run mailserver, webserver,dhcp, firewall and router on the leopard server.
I have a dsl modem (static ip ) connected to the server on ethernet and a lan that is connected trough the server to internet. That works ok. I can also reach my webserver both from inside and outside as of today. Mail seems to work from both sides too. Here comes the trouble:-)
I have two additional servers that needs to be reached from both lan and web on my lan.
all my services has correct dns resolves from the net.. They are as follows:
www.thure-trykk.no ->212.125.243.131 -> (website on the leopard server at 192.168.1.1)
mail.thure-trykk.no ->212.125.243.132 -> (mailserver on the leopard server at 192.168.1.1)
www.iway.thure-trykk.no ->212.125.243.134 -> (second webserver at lan 192.168.1.2)
www.godkjenning.thure-trykk.no -> 212.125.243.135 -> (third webserver at lan 192.168.1.3)
all of these needs to be reached from lan and wan by hostnames
Dont know it this was enough to tell you what i want to do ??

I want to delete all Podcastepisode-Downloads in one step!

Hello, I have so much Podcasts in my Podcast-App.
I want to delete all Podcastepisode-Downloads in one step!
Long time ago this was possible in the Music-App.

Change the default settings on the app to manually download.
Then delete the App
Then reinstall it and change the settings back to whatever you want....
Think this should work, but I've got too many podcasts on my phone to try it on your behalf!

One Step DVD Capture Video TIme

I've just recently run into a problem with One Step DVD and would like to know if anyone else has had the same issue. I normally don't use One Step DVD but my father uses it because it requires little if any computer skills when it comes to iMovie or iDVD.
He recently came to me with a problem that has cropped up with the One Step option. When he goes to use it the the very first step in the process is capturing the Video from the camera. The camera rewinds the tape as is the norm and then the computer starts to capture the video with no problem. The problem is with the capture time/available time that shows up on the screen. For some reason the available time consistantly shows approximately nine minutes when it is a full hour long tape. I've tried finding if there is some setting that is throwing it off in the preferences and can't seem to find anything related to it. I've also tried dumping the preferences with no result. I've also tried a number of different video tapes with no change. Recently I took it home and tried it on my system where it gave me a available capture time of 17 minutes even though there is an hour of footage. Today I took MY video camera up to my folks house and hooked it up and gave it a shot and of course it gave me an available capture time of 9 minutes. So I'm at a loss here folks. Any help would be appreciated. I personally think it's the prog but I'm open to suggestions. Below are the cameras and systems I have tried this on. Remember I've tried both cameras with each computer with the result of the available capture time not matching the amount of footage on the tape.
My Father's setup
Mac Mini 1.6 Ghz
1.6 Gb Ram
OS 10.4.8
Video Camera: Canon ZR45
My Setup
Dual 2.0 Ghz PowerMac G5
2.5 Gb ram
OS 10.4.8
Video Camera: Sony TRV315

Hi Wayne,
I honestly have no explanation why iDVD / OneStep is showing only 17 mins. left of capture unless you don't have enough available HD space to capture to.
3 suggestions only:
1. Make certain you have plenty of available HD space for this process. I recommend no less than 20GB of available HD space for each hour of video.
2. Before launching iDVD/OneStep, drag and drop the plist for iDVD to the trash. Looks like this:
com.apple.iDVD.plist
3. After trashing the plist for iDVD, connect your mindv camcorder via firewire and relaunch iDVD while the camera is powered on. In most cases, iLife apps will default to the correct settings on its own (provided your mac sees the connection under system profiler).
Good luck & hope this helps
SDMacuser

Capture & Post Invoice at the time of Goods Receipt in one Step

Hi,
We are doing the following for Goods Receipt (as decided by other consultant)
1. Goods Receipt (Only Part I) - currently being done by Stores
2. Capture Invoice (J1IEX) - currently being done by Purchase
3. Post Invoice (J1IEX) - currently being done by Finance
We tried to capture & Post Invoice in single step at the time of Goods Receipt. The system is allowing us to do so. Can we do the goods receipt & capture & post invoice at the time of GR only.
What is the difference or benefit in doing GR & capturing invoice separately?
Regards,

>
PK wrote:
> Hi,
>
> We are doing the following for Goods Receipt (as decided by other consultant)
> 1. Goods Receipt (Only Part I) - currently being done by Stores
> 2. Capture Invoice (J1IEX) - currently being done by Purchase
> 3. Post Invoice (J1IEX) - currently being done by Finance
>
> We tried to capture & Post Invoice in single step at the time of Goods Receipt. The system is allowing us to do so. Can we do the goods receipt & capture & post invoice at the time of GR only.
>
> What is the difference or benefit in doing GR & capturing invoice separately?
>
> Regards,
Hi PK,
Standard SAP provides different stages based on business criticality.
Since a warehouse person may not be aware of Excise functionalities he should only be allowed to capture the invoice, however Posting excise credit is a critical business function hence site Excise clerks should be allowed for these rights.
However based on business scenario or size of business the same can be done at one place.
So as your business demands the process can be changed with that. However criticality of the matter & process lies with the business finally.
There are scenarios where actual material reciept is short at times hence credit allowed has to be reduced than original, there may be scenarios where a critical excisable product may have wrong chapter heading maintained at PO level which needs to be changed at credit availment/capture stages to show correct chapter in excise registers...
these all cases support the process to be splitted & responsibilities segrigated....
Hope it assits....
regards
ak

How can i slide a sound track one frame at a time in Pre 10

i do a lot of music videos where i record audio separtly from the video and then sync them and i have a lot of trouble getting them in sync, does anyone have any good tricks to do this? also, can i move said sound track one frame at a time in either direction to help get these tracks to sync up?
Thanks

If you zoom to the max, and watch that little TimeCode box (it pops up, when you begin dragging), just look at the last two digits, as those are the Frames. Even with my clumsy hands and fingers, I can nail the displacement to Frame-accurate standards.
Now, some other NLE's go a step further, in that when the Clip is Selected, one can nudge it along, with modifier keys and the Left-Right Cursor keys. I do not think that has been added to PrE 10, but would be a great Feature Request.
Good luck,
Hunt
[Edit] Well shut my mouth! After you Select the Clip (unlinking with Alt+click, if muxed), just hold down the Alt key, while hitting the Left-Rigt Cursor keys!!!! Forget that Feature Request.
Message was edited by: Bill Hunt

Trouble positioning a stepper motor accurately (to one step)

I'm using a PCI-7344 with an MD7506 motor driver from RS. I'm testing angle sensors whose voltage output is proportional to (you've guessed it...) angle.
I'm stepping the motor round by one step, checking that it's got there by reading the encoder, measuring the sensor voltage and repeating.
My problem is that the motor sometimes 'hunts' around the target position. In closed loop (with an encoder associated with a motor) this results in sometimes not being able to reach the target exactly with the pull-in moves.
Using open-loop and reading the encoder directly I get better results because I can loop more times, but the motor will still 'hunt' around a target point, changing direction a few times as it over
shoots by a step.
As there are a million MAX settings for this I won't list them all here, but I'm checking for a move complete when the InPos flag is set and I have a deadband of 0 steps too. I'm only rotating at 120 step/sec with a 10ms pause between steps.
Do I have to accept that stepper motors are only accurate to +/- 1 step or am I doing something wrong?
Thanks,
Mike
Mike Evans
TRW Conekt
N.I. Alliance Member, UK
http://www.Conekt.net

Mike,
Maybe other people will have better suggestions, but in my case I can advise to either:
1. increase the number of pull-in moves,
2. increase the microstepping of your drive,
2a... together with a higher precision encoder...
Other than that, the accuracy is advertised to +/- 1 step, so maybe you would like to consider a stepper with more steps/rev.
Good luck!, I hope other people will give other suggestions.
Nestor.
Nestor
National Instruments

I have an image sequence in JPG and when I select open image sequence, select all does not work and I can only highlight one frame at a time. I want to import these frames into QT7 to make a time lapse clip. Any suggestions

I have an image sequence in JPG that I want to import into quitck time 7 for making a time lapse clip.   It has an option to open the image sequence, but when I do, it only lets me highlight one frame at a time. The select all option seems to do nothing when I click on it trying to highlight all the frames.
      If QT7 is not designed to perform this function, is there another alternative?   iMovie is non intuitive for this kind of operation and I cannot find a clear tutorial for using it to make time lapse clips from a sequence of still frames.
       The tutorials Ive found on YouTube are well intended, but they all seem to leave out a vital step that eludes detection.
Anyway, any help appreciated.
Thanks
   I am new to this forum and I'm not sure I can locate this thread again once I'm out of it.
<Email Edited by Host>

Yes, I tried that.   The files were ordered by their original numbers as imported from the camera, but I batched them through Phocoshop to downsize all of them into a more manageable file size.   I opened that destination folder from quick time from where it said select image sequence.   I clicked on the first one and opened it.   The result was a large image with an arrow indicating a movie was ready to go.   When I pressed the arrow, though, I realized it had only imported that one frame so there was no movie.   The files are Jpgs and are about 450 KB each.
    To your knowledge are there any links to iMovie tutorials or quick time tutorials that may address this situation? Maybe there will be one I haven't looked at yet.
    Thanks

How do I close one page at a time?

When I go from my email to a link and then can't get back to email using the back arrow I usually close that page and am back at my email. With Firefox I go to close and a message says that I am about to close 2 tabs and I have to say yes or it doesn't do anything and then it closes my email (which I am trying to get back to). Then to get back to my email I have to go through the multi step process to open it again and get back to the message I was reading before I opened the link. Frustrating! Pleas let me know who to be able to close only one link at a time. There must be a way or it will be too time consuming to use. Thank you

Are there any entries in the tab history of the Back button on the Navigation Toolbar?
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can close the current tab with a middle-click on that tab or via the keyboard shortcut Ctrl+W
Make sure that you do not click the close X on the window title bar.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How do I play one album at a time?

I want to play one album at a time by artists for whom I have multiple albums. I have the newest generation ipod touch. One album at a time used to be the default mode, but with the new operating system iOS7, this is no longer the case. Here's an example - I want to play the Pixies "Surfer Rosa," but when i click on the first song, it says it's playing 1 of 58 songs continuously - I want it to stop playing after "Surfer Rosa," I want it to say it's playing 1 of 14 songs. Is there a simple fix for this? Something in general settings or music settings that I have overlooked?
I have found one way to play just one album, but it seems a bit complicated for what should be a simple fix. I click on the first song on Surfer Rosa, then click on the 3 dot 3 line icon in the upper right corner, then click on another song, then back to the first song, then click done, and now it says it's playing 1 of 14 songs. It's nice to have found this way around the issue, but, it's a lot of steps for something that used to be the default mode.

Do you really mean upload as in transferring the files to another computer somewhere, or do you mean you ripped as in ripping a CD to copy the music to your computer?
Select the tracks you want to edit, Get Info on them, then enter the desired album name.

In iTunes, is there any way to play one song at at time and have the song stop at its end. I want to play guitar with a track and have that track stop playing rather than going to the next song.

I want to play a single song in iTunes on my ipad and have the track stop when the song finishes, rather than itunes playing the next track. I play guitar with the track and need iTunes to stop at the end of the song.
I have worked around this issue by creating a separate play list for each song, then inserting the song into the play list. I would like to find a more straight forward solution that would eliminate this extra step. On my PC, I use QuickTime to bring up an individual song and then can play one track at a time.
Thanks!

On the IPod if the shuffle icon is colored blue it is ON, if it is colored white it is OFF. This control is global, if it is ON any album or list will be shuffled.

Tip: How to play a playlist one song at a time from iTunes on a computer using the checkbox property

I would like to share a tip about how to play a playlist one song at a time from iTunes on a computer. The tip I am sharing is simple, but I was not able to find it in the iTunes Help. After searching on the internet I found the idea for this solution in a discussion in which this was presented as a frustrating problem rather than a desired behavior. This tip relies on the checkbox for each song in iTunes. For a song in a playlist to play automatically, the checkbox must be checked. To keep a song from playing in a playlist, simply uncheck it. Therefore, to keep all songs from playing automatically in a playlist, simply uncheck them all. Now you have a list of desired songs in a desired order but none of them will play automatically. You can play each one when you want to play it without having to search for the next song and without having to be at the computer to stop the playing after each song.
Step by step:
1. Create the playlist.
2. Uncheck all of the check boxes in the playlist (In iTunes for Windows, ctrl click one of the check marks to uncheck all of the checkboxes at once)
3. Now double click (or select and press spacebar) a song to play it. It will stop when finished because there is no other song checked to be played next.
4. If you want to change back to normal sequential play, ctrl click one of the check marks again to change all of the checkboxes back to the checked status.
Based on some discussions I found while looking for a solution (including at least one in which the questioner got bashed about why anybody would ever want to do such a thing and in which the proposed solutions were things like creating one song playlists or simply press stop after each song), some may not understand why this would ever be desired. Here's why I wanted to do it:
I was responsible for playing a series of songs at a dance. I needed to stop after each song to have a transition time to allow me to introduce the next song and to give new dancers time to get onto the floor and other dancers an opportunity to leave the floor. Furthermore, I was also dancing and didn't want to have to spend time searching for the next song (which is why I wanted to create a playlist in advance with just the songs I wanted to play in the order I wanted to play them) and I wanted each song to stop after playing since I was not at the computer to press stop.
I hope this will help others who have a similar need.

Thank you! I put some self help hypnosis tracks to listen to on my iPod. I did not want to go to the next track automatically, I wanted to listen to them individually, one at a time. (If I fell asleep, I did not want to 'wake up' in the middle of a different track.) Your information helps me understand that I need to re-load this playlist onto my iPod from my Mac computer, only first, I need to UNCHECK the boxes in front of each track so the iPod will STOP each time after playing the selected track. It is too bad that so many functions are not availabvle within the iPod, but that is probably why they can make it so compact.

One Step at a Time

Similar Messages

Maybe you are looking for