One step cross docking in wm

hi,
i am working on one step cross docking scenorio , i am missing some where in configuration. plz guide me.
steps i followed
i) checked the preallocated check box in omlj transaction for 101 - movt type
ii)entered the preallocated stock details in lt51 transaction.
iii)enter the goods receipt with respect to purchase order in migo.
iv)create transfer order for inbound delivery with refrence to TR.
v)create transfer order for outbound delivery without refernce.
i follow the above steps but still the entry in preallocated stock in lt51 there.where i miss the configuration guide me.
i already view the help.sap.com,i cant understood where i missing the config.
appreciate your help always
muthuraman.d

Hello,
For Oppertunistic Cross dock..
You need to create either Putaway TO/Pick TO and then system checks the cross doc and cancel the TO and create a new TO from 902 to 916. and also updates in the document flow. This you can do with out Cross dock monitor. With out planning the cross dock you can do the cross docking by following the config in help.sap.com.
for more information about the complete config you need to see the sap link below. sure it will help you.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
thanks.
tkreddy

Similar Messages

One step cross docking

hi,
i am working on one step cross docking scenorio , i am missing some where in configuration. plz guide me.
steps i followed
i) checked the preallocated check box in omlj transaction for 101 - movt type
ii)entered the preallocated stock details in lt51 transaction.
iii)enter the goods receipt with respect to purchase order in migo.
iv)create transfer order for inbound delivery with refrence to TR.
v)create transfer order for outbound delivery without refernce.
i follow the above steps but still the entry in preallocated stock in lt51 there.where i miss the configuration guide me.
i already view the help.sap.com,i cant understood where i missing the config.
appreciate your help always
muthuraman.d
Edited by: muthuraman d on Feb 12, 2010 2:52 PM

Hi
KIndly check the below OSS notes for the same
559708 - LT51: Deleting and updating preallocated stock entries
556490 - Incor.pre-allocatd actual stock aft.confirm.fm SU bulk stor.
555340 - Preallocated stock table entries are deleted too early
Regards
Damu

Not able to link inbound to outbound in cross dock

Hi,
we have a warehouse managment setup in our project we are using cross dock process linking of my inboun delivery to outbound delivery. In my inbound delivery consits of 2 materials amd my outbound also consists of the same materials while i am going to connect this inbound delivery to outbound delivery. The inbound is giving all the materials and while the outbound is showing only one item cross dock monitor but the second item is present in outbound delivery but it is not displaying in the monitor tool.
Can any one let me know.
sunil

Can you give me some more inputs on this? I need to know exactly what is the role of ware house there? What exactly you are doing in cross docking? Are you shipping the material received through inbound process by just putting in another truck? What mvt types are used here both for inbound and out bound?

Cross Docking TO creation

Dear experts,
I am going for planned cross docking, I am able to successfully plan the documents (inbound and outbound deliveries) through LXDCK, but am not sure about what to do after this. After planing if post GR and go for TO creations it directs me for normal storage type instead of directing me to 916 (from 901). Pl let me know the sequence of steps after this. I have done all the necessary config as per my knowledge.
Pl reply on priority,
Thanks and regards,
Pranab.

Hi,
Planned cross docking enables two-step cross-docking, where goods to be cross-docked are first moved from the goods receipt (GR) area to a cross-docking storage type. The goods are subsequently moved to the goods issue (GI) area upon release of the outbound document. Hence after the system suggesting normal storage type, you need to transfer stock to cross docking area. Thanking you.

Hw to deactivate a valid cross-docking item i.e., 2-step picking

Hi Experts,
Hw to deactivate a valid cross-docking item i.e., the two step relevance should be de-activated for the delivery items. i want to convert 2-step picking to one-step picking based on elapsed time.
Be helpful. Its urgent.
Thanks & Regards,
Madhu

System will generate XD deliveries once you do the goods receipt against Vendor Purchase Order.In your case two outbound deliveries generated as you have to UB Purchase Orders.After Creation of deliveries then you tried to create the delivery through wf30 .As the deliveries created alredy you got error No entries found relevant to delivery generation;'
If you delete the deliveries then it is difficult to create new outbound deliveries.

Cross Docking with LE-WM - or - Reactivating Back Orders upon Goods Receipt

I have been reviewing the documentation for Opportunistic and Planned Cross Docking in LE-WM. The requirement is to release Back Orders upon receipt of a shipment to avoid putting them away and picking them right away from the bin. We want to release the Back Orders for picking in the GR area at the time of receipt.
So far it appears that Opportunistic Cross Docking depends on a Transfer Order already existing. The system then cancels the existing TO and replaces it with a TO to pick from the receipt Storage Type.
Planned Cross Docking appears to require an existing Outbound Delivery to the expected Inbound Delivery.
In the case of a Back Order, no Outbound Delivery or Transfer Order exist since there is no stock to release until the goods are received.
Is there a way to release Back Orders to be picked directly from Goods Receipt?
Thanks;
Jim

The problem is that all the information I found so far about it is over the process of external goods coming and sending they out without the need of storing in the warehouse. They go directly to the picking area (one step) or in two step process going first from 902 (Good receive from external) to Cross docking Sorage type.and another movement from Cross Docking Storage type to 916 Good issue Storage type.
I need to know if it is possible to implement a solution of Cross Docking for certain number of products having a factory and a warehouse. If so, would you give me a brief process flow?.
Thank You very much.
Al
Edited by: agmogena on Aug 22, 2011 12:01 PM

Cross Docking from a Factory

Hi all,
I´m doing a first approach to cross docking, So far what I read about it is that the goods are taken from goods receipt to goods issue without being placed in storage in the meantime.
My customer is a factory. They heard about the Cross Docking advantages improving the process in the Warehouse and avoiding storage and inventory tasks (they are using WM).
Iu2019m not sure if Cross Docking can be the way for improving the process of producing and sending to costumers without storing in the warehouse or there is a easy way to follow with not Cross Docking involved.
Thank You
Al

The problem is that all the information I found so far about it is over the process of external goods coming and sending they out without the need of storing in the warehouse. They go directly to the picking area (one step) or in two step process going first from 902 (Good receive from external) to Cross docking Sorage type.and another movement from Cross Docking Storage type to 916 Good issue Storage type.
I need to know if it is possible to implement a solution of Cross Docking for certain number of products having a factory and a warehouse. If so, would you give me a brief process flow?.
Thank You very much.
Al
Edited by: agmogena on Aug 22, 2011 12:01 PM

Cross docking in EWM

Hi all,
We are trying to create a cross docking scenario in EWM. We are trying for the EWM triggered opportunistic cross docking. With all the suggested config settings and master data, the process is not happening. Can anybody share a config document regarding steps to be followed for Cross docking (in EWM).

kishore yerra wrote:
Because your scenario is working manually the above may not be a major issue.
That's right. I've checked my settings, but this doen't seem to be the problem. As said, it works fine when creating WT's manually.
kishore yerra wrote:
the way we can try and diagnose this would be to deactivate your entries for storage type search sequence and try to retain only one entry that you used for cross docking.
I've changed the storage type search sequence for putaway, so that the only available storage type is the Goods Issue zone. The system now creates a WT for putaway in 9020. However, it doesn't link the stock to the outbound delivery order, so it actually acts like a putaway. So, this is not the solution unfortunately.
kishore yerra wrote:
Along with this put a closs monitor on SLG1 to understand the determination used when warehouse tasks are created.
SLG1 shows the following error message when creating the WT:
Immediate Actions Only: Condition Is Not Evaluated (Message no. SPPF_DET_CRM002)
it also displays one interesting warning message:
Action Merging: One Unprocessed Action with Equality Check (Message no. SPPF062)
I'm not sure what to do next; any suggestions?
Regards,
Oliver

Cross-Dock: No inbound docs have been selected for planning

Hi everybody here,
I am testing cross-docking function on our DEV environment. I set the warehouse 001 as one-step crossdocking and no opportunistic cross-docking allowed, not consider FIFO. The time ref. is delivery date & time, time window is set to 72H, release time is 2H and latest relase time is 1H.
Then I set movement type 501 and 201 as cross-docking relevancy.
I created 2 TRs with movement 501 and 201 with same material and same quantities. The 501 TR's planning time is 12:00, Aug 17 and The 201 TR is 23:00 Aug 17. However, when i run LXDCK to plan a cross docking with these 2 TRs, system prompts an error message "No inbound docs have been selected for planning".
If you guys have implementation experience of cross-docking, please give me some advice, many thanks!
Leon Xiao

Hi,
I am facing a similar problem, were you able to find out the reason for the problem?
Any help is appreciated
Thanks in advance,
Mike

Cross Docking in SAP R/3 ECC 6.0

Folks,
I'm struggling to make 2-step w/ planned cross docking work. Basically, unable to connect the planned with the candidate document.
Here is the scenario:
1. (Candidate) Outbound delivery created with a delivery date / time of 09/04/08 - 10:00 (No TO initiated)
2. (Planned) Inbound delivery created with a delivery date / time of 09/04/08 - 12:00 (No TO initiated)
The system invokes different messages based on the following config. settings: (These messages occur when I right click on the inbound delivery and select "plan cross docking")
Setting 1:
Planning time: 1 D
Default Release: 1D
Def Latest Release: -
Message: No inbound documents have been selected for planning
Setting 2:
Planning time: 1 D
Default Release: 1D
Def Latest Release: 1D
Message: Time ref. 09/04/2008 10:00:00 of plan.doc. xxxxxxxxx does not match cand.documents time refs
BTW, it's a simple setup WITHOUT transportation, yard management, HUM or SUT.
Thanks in advance for your valuable comments!!

Dear Christiane,
First & foremost appreciate your quick response.
As per what you say (& If I have understood it correctly) having the Delivery Date & Time of the Inbound as 09.04.2010 10:00 would solve the issue ? I did change the Inbound Delivery time but to no avail.......as per my example.....what do you think should be the Inbound/Outbound Date & Time
If I understood right, as per my example, the Outbound Delivery time is set to 12:00, the latest release time is set to 1 hr thus the latest time for the outbound to be released is 11:00 (Outbound Del time - latest rel time)
Planning time is again 1hr, so planning window is from 10:00 to 11:00 - [(Outbound Del time - latest rel time) - Planning time]. Hence if I set the Inbound time to 10:00 it should work right ?
The release time, what effect does this have ?
Looking forward to your help.
Imran

One Step STO process

Hello All,
I wanted to know the logic regarding one step STO process.
while doing Post goods Issue :
1) system posts the 645 mvt type (which is maintained in schedule line category NC)
But i am unable to understand how system is triggering the 101 mvt type?
Please Suggest on this...... is it a SAP standard code which is calling the 101 mvt type or any settings in SPRO ?
regards,
sujit

Hi
its sap standard
645 Goods issue for a cross-company stock transport order in one step (Shipping)
a goods receipt line is generated automatically for 101
You post the stock withdrawal in the issuing plant and the receipt into stock at the receiving plant simultaneously. One material document is created
Regards
kailas Ugale

Cross Docking readily in ECC 6.0

Hi,
I am in ECC 6.0. I wanted to know if the Cross docking function is in.
Do I need to turn on any activation switch?
Someone, I am not able to locate any reference or folder for CROSS DOCK in the IMG.
I read up the SAP Help but cannot find the path to perform the configuration.
I also cannot find the sample storage type to reference. Is it true I will need to create a fresh storage type?
Can some one share?
Thanks

I have a standard setup/config for cross docking functionality. However, all the outbound deliveries are getting dumped in the Alert monitor with error "Del - Release time in past". I tried changing the delivery dates but no success.
Should I remove the object class (571), which checks for the Delivery release time, from the alert monitor? Any advice on how to fix this issue?
All responses will be rewarded.
Thanks !

More than one step BC sets approval for PO's

Good day All.
I would like to know the bc set for more than one step of approvals for the Purchased Order. We know the without tha approval and one step approval for PO.
/SAPSRM/C_PO_600_000_SP04 Purchase Order Without Approval
/SAPSRM/C_PO_600_001_SP04 Purchase Order with One-Level Manager Approval
You speedy response would be appreciated.
Regards
Makoro Manyathela

Hi,
You can configure many approval steps based on your business requirements.
The BCSets /SAPSRM/C_PO_600_001_SP04 is just a sample configuration.
Please go to IMG.
SRM -> SRM Server -> Cross-Application basic Settings -> Business Workflow -> Process-Controlled Workflow -> Business Process Configuration -> Define Process Levels.
Regards,
Masa

Cross docking and flow throughs

Hi Gurus,
Can anyboday send me configuration steps in cross docking and flow through scenarios in is retail.
thanks in advance.
Regards,
PS

Hi,
Explore following URL
Collective Purchase Order
Bye,
Muralidhara

Cross Docking Pick TO cancellation

Hi Experts
I am trying to Configure the Cross docking scenario
I have configured the following
1. Cross-dock Warehouse level customization in SPRO-LE-WM-Cross Docking-Maintain Warehouse level Settings
2. Cross dock relevancy for movement types in SPRO-LE-WM-Cross Docking-Define Cross docking relevancy for movement types
3. There is no Pre-allocated stock check for both movement types 101 and 601
4. Stock placement and stock removal confirmation required for storage types 902 and 916.
Transaction Steps:
1.Outbound delivery, TO created
2.Inbound delivery created, GR done, while creating Putaway TO system is moving the stock from 902 storage type to 916 storage type
But the pick TO created against the Outbound delivery is not cancelled and the Outbound delivery is not updated with the Putaway TO.
Which step or config i am missing?
Regards
Venkat

Hi, you have two options to configure cross-docking. Take a look at these documents for detailed explanation.
1) Planned Cross-Docking
Planned Cross-Docking - Cross-Docking (LE-WM-DCK) - SAP Library
2) Opportunistic Cross-Docking
Opportunistic Cross-Docking - Cross-Docking (LE-WM-DCK) - SAP Library
I figure you are using opportunistic xDck based on your question.
Could you just go through all the steps on the document I linked?
Just go through all of the requirements, carefully inspecting if any
of those doesn't match the process.
First you have the settings required. Make sure they are OK.
Then check the process flow and your documents you are testing
with.

One step cross docking in wm

Similar Messages

Maybe you are looking for