One step to OSS connect

Hello
I try to make a connect to SAP by oss. I have already do the following step:
1)Fill the "Remote Connection Data Sheet"
2)Get an answer with Distingushed Name
3)Unpack sapcrypto.dll to ntintel folder (I have Windows 2003 on Intel)
4)sapgenpse.exe get_pse -v -r certreq -p local.pse "CN=xxxxxx, OU=xxxxxx, OU=SAProuter, O=SAP, C=DE"
6)Get the connted of certreq and fill it into the form on marketplace
7)Get key from ather form from marketplace and put this text into "srcert"
8)sapgenpse.exe import_own_cert -c srcert -p local.pse
9)Quality test: sapgenpse seclogin -p local.pse -O sncadm running seclogin with USER="sncadm" - all OK
After all this step I have gone on marketplace and filled all tab about my system (for router I selected 3299 port). But connection was canceled. In sm59 I described /H/myIPwithrouter/S/sapdp99/H/sendedsapIP/S/sapdp99/H/oss1
But test connection takes me this:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: hostname 'oss1' unknown
Error Details LOCATION: SAProuter 37.15 on sapserv2a
Error Details DETAIL: NiPGetHostByName: hostname 'oss1' not found
Error Details CALL: gethostbyname
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 223
Error Details MODULE: niuxi.c
Error Details LINE: 329
Error Details RETURN CODE: -90
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Fri Nov 16 08:35:28 2007
Error Details VERSION: 37

What do I wrong?
P.S. I want to use SNC

All your advices was made.
I get messageBox with text:
Unable to connect to SAPNet message server
(Default connection will be used...)
Confirm it.
Then I get next messageBox:
sapserv2a: route permission denied (myiprouter to oss1, sapdp01)
Location SAProuter 37.15 on sapserv2a
Time <current date and time>
Release 640
Version 37
Return Code -94
Counter 510
Maybe I need input profile parameters, such as snc/enable=1 or another?
And one more...
in letter from from SAP was wrote
# SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server>
<R/3-Instance>
SNC-connection from SAP to local R/3-System for PCANYwhere
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 5631
SNC-connection from SAP to local R/3-System for saptelnet
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
Access from your local Network to SAP R/3 Frontend (OSS)
P <internal address range> 194.39.131.34 3299
All other connections will be denied
D * * *
Does this parameters must begin from the first position of file?

Similar Messages

One step idvd was was connecting with camera and it has stopped connecting

i had camera Canon Elura 100 connected to firewire to computer. I was using one step IDVD and it was working. Starting using I movie on another camera
downloading from a camera card. Went back hook up firewire to Cannon camera and it will not read the camera now. I have reboot, replugged in and still will not work any suggestions?

Hi
May be help here
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

One step DVD unable to capture video

I have made many movies using one step dvd in the past. For some reason, now I get a message "Nothing Captured" "No video has been captured" when I try to create a new dvd from my video camera. I used the same camera and connection cords on another apple and it worked fine. It worked fine on this computer in the past. Any ideas?
Thanks

Bengt;
Good ideas but I have checked each of those items. My camera is set to play, the tape works and I am using my firewire cable. The strange thing is I did everything exactly the same on a different apple computer and it copied the tape to the DVD with no problem.
Thank you for thinking about my problem.

One Step DVD Capture Video TIme

I've just recently run into a problem with One Step DVD and would like to know if anyone else has had the same issue. I normally don't use One Step DVD but my father uses it because it requires little if any computer skills when it comes to iMovie or iDVD.
He recently came to me with a problem that has cropped up with the One Step option. When he goes to use it the the very first step in the process is capturing the Video from the camera. The camera rewinds the tape as is the norm and then the computer starts to capture the video with no problem. The problem is with the capture time/available time that shows up on the screen. For some reason the available time consistantly shows approximately nine minutes when it is a full hour long tape. I've tried finding if there is some setting that is throwing it off in the preferences and can't seem to find anything related to it. I've also tried dumping the preferences with no result. I've also tried a number of different video tapes with no change. Recently I took it home and tried it on my system where it gave me a available capture time of 17 minutes even though there is an hour of footage. Today I took MY video camera up to my folks house and hooked it up and gave it a shot and of course it gave me an available capture time of 9 minutes. So I'm at a loss here folks. Any help would be appreciated. I personally think it's the prog but I'm open to suggestions. Below are the cameras and systems I have tried this on. Remember I've tried both cameras with each computer with the result of the available capture time not matching the amount of footage on the tape.
My Father's setup
Mac Mini 1.6 Ghz
1.6 Gb Ram
OS 10.4.8
Video Camera: Canon ZR45
My Setup
Dual 2.0 Ghz PowerMac G5
2.5 Gb ram
OS 10.4.8
Video Camera: Sony TRV315

Hi Wayne,
I honestly have no explanation why iDVD / OneStep is showing only 17 mins. left of capture unless you don't have enough available HD space to capture to.
3 suggestions only:
1. Make certain you have plenty of available HD space for this process. I recommend no less than 20GB of available HD space for each hour of video.
2. Before launching iDVD/OneStep, drag and drop the plist for iDVD to the trash. Looks like this:
com.apple.iDVD.plist
3. After trashing the plist for iDVD, connect your mindv camcorder via firewire and relaunch iDVD while the camera is powered on. In most cases, iLife apps will default to the correct settings on its own (provided your mac sees the connection under system profiler).
Good luck & hope this helps
SDMacuser

Officejet 7310xi All in One Printer no longer connects wirelessly

Hello all,
My Officejet 7310xi All in One Printer no longer connects wirelessly.
The printer does no show up while searching for it wirelessly where it had previously.
In the past it would say that the printer (HP Series 7300) was offline. I would remove the device through the control panel and search again. A printer would be found as HP Series 7300 (Copy 1) . A "ghost" of the original would remain as an offline device. I would default to the new printer icon, Copy 1, and it would work. This happened over the course of a year without any problems.
Now nothing is working. The printer can't be found by my network. I tried downloading drivers, etc. from HP but they either can't download or stop during installation. I don't know if an Windows 8.1 update affected it.
Although the printer has a built in network set up option, it has no installation wizard. I can't find a way to activate the wireless feature/icon. There is no I.P. address either.
I feel like a monkey pulling levers for a banana! I appreciate your help.

Hey @Kathlanta ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I understand you are having issues with your HP Officejet 7310xi connecting and staying on your network. Going through all of this is making you feel much like this;
By the end of this I want you feeling more like this;
Now let's get to the bottom of this and have some fun doing it! (and no, I have not completely adopted the idea that you are a monkey, but for the time being, seems most fitting LOL )
Ok, so what we are going to start with here is; a full print system uninstall and reinstall and run it through USB to test the printers functionality.
Here is how you uninstall the whole printer software on 8.1 >> Uninstalling The Printer
Here is how you install the drivers offline (use the appropriate links to get your steps) >> Installing HP Printer Software for a USB Connection in Windows 8
You wont need to worry about the wireless right yet until we figure out if the rpinter hardware is ok or not. So sit tight on that portion, I'll get that all back and working later after we figure this stuff out now.
Look forward to hearing back from you! Have a good one!
I worked for HP.

4 out of 5 devices connect to Time capsule. Last one to try to connect fails to connect, no matter which device it is.

Prior to problem: All 5 devices (iMac, Mac Air, iPad and (2) iPhone 4) were surfing wirelessly on Airport express.
Replaced AE with Time Capsule.
Problem: Wife's iPhone could not connect to T.C. Other 4 devices connect without problem. Wife's iPhone can surf other wireless networks. After doing a total shut down of all devices and restart of each, starting with 3rd party router, then T.C., then each device one at a time... wife's iPhone can connect, but Mac Air can not. Observed that in each case, the one that can't connect is the last one to be restarted and attempt to connect. Did this a 3rd time. I chose my iPhone to be the last to try to connect . My iPhone can't connect but all other devices are connected. Every case: last to connect can't connect.
Steps taken before realizing it was the "last device to try connecting" (back when I thought it was simply my wife's iPhone): Wifi Off/On. "Forget Network." Reset Network Settings. Power iPhone Off/On. Power T.C. Off/On. Turned T.C. wireless security Off/On. All these were done multiple times.
It appears there is no hardware issue since all are capable of connecting to T.C., just not at the same time. I don't know much about protocols and addresses. Could it be that T.C. is fouling up the assignment of an address or channel or route or whatever to the 5th device that tries to connect? Is the 5th device left without a address, channel or route to the T.C.?
My security is WPA2 Personal. It's on. The password is alphanumeric 9 characters. On my iPhone that can't connect, the satus wheel is spinning continuously beside my network's name. Tapping the blue arrow for more info shows the window that has "Forget this network" at the top, followed by DHCP, BootP and Static. DHCP is selected. The following fields are listed: IP Address, Subnet Mask, Router, DNS, Search Domain and Client ID. Most times, all of these fields are blank. Right now, the first two fields are filled in. IP address starts with 169 and subnet mask is 255.255.0.0
Please help.

Right now, the first two fields are filled in. IP address starts with 169 and subnet mask is 255.255.0.0
That is auto IP and means the device was not able to pick up an IP from the dhcp server.
I am scratching my head.. it is not one I have seen with Mac stuff or on these columns since I started answering questions.. it is seen in mixed environments fairly often that stuff doesn't play nice with each other. But Mac - Apple has shown fairly consistent wireless functionality.
Is the TC brand new? Did you ring Apple and ask if they can sort it?
When you are using 100% apple environment, to me that is their job to figure out.
For what you can do, I would try and flash the TC back to 7.5.2 firmware. I have heard people say the latest TC that is not allowed but have a go.. if you run Lion certainly download and use exclusively 5.6 airport utility.
Is the TC set to router or bridge? Is the TC the only router?
Could you bypass at least the issue for now using the airport express plugged into the TC as an AP??

I'm trying to pause import to one step dvd so I can change 60 min tapes.

Hi all
I'm trying to archive mini dv to dvd as easily as possible, my tapes are 62 min
long and if I put 2 tapes into imovie I already exceed buning limit.
One step dvd only lets me import one tape and then decides to complete the task of burning.
Should I buy better software or my other method could be to pipe the camcorder into my panasonic set top dvd burner, but I'm not sure if I'll
lose some quality it only has s video connection and no fire wire.
help

I've solved my own problem.
While importing to one step dvd and while on that pane I click and hold a word
on the top bar of the screen wich sort of freezes everything and with my other
hand I pause the play on the camera and eject the tape 2 seconds before
the tape is about to come to its end, then load a rewound tape back in and
push play then let go of the mouse or even click one more time on the menu bar. I don't think one step knew what just happened, but there maybe blue
screen recorded while I changed tapes. We'll see.

One-Step iDVD

I have several tapes I recorded on my new Canon HV20 dvd camcorder. I connected it with the accompanying firewire to the iMac and set it to VCR mode as directed by the One-Step tutorial. When I click onto "OK", it does nothing. Am I supposed to load the Digital Video Software disc that came with the camcorder first. I restarted the computer and repeated the process and I received a message stating "You inserted a blank DVD. Choose an action from the pop-up menu or click ignore." The pop-up options include OPEN Finder, OPEN iDVD, OPEN iTune, OPEN Disc Utility. When I select the OPEN iDVD option, it takes me back to the beginning, telling me to connect the camcorder to the computer with the firewire, insert an blank DVD and select "OK"......and, again, nothing happens!

.....and, again, nothing happens!
That's because iDVD One-Step doesn't support HD content. Sorry.
From http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6757.html ; If your camera records video in the high definition HDV format, you can’t use the iDVD OneStep feature to transfer the footage to a disc. Instead, you must use iMovie HD to capture all the footage from your camera. Then, within iDVD, you can add the movie to a project, just as you do with all standard iDVD projects (projects that are not OneStep DVDs or Magic DVDs).
F Shippey

One step DVD with 2 or more tapes

How do I go about puting 2 mini DV's to DVD using the one step DVD function (can this be done???). If I have two tapes then try and transfer to DVD I always seem to have to create a full DVD with menus , chapters and so forth. Any ideas???
G5 i-sight Mac OS X (10.4)

just in case all links flake out again, here's the actual text /content i'm referring to:
i'm trying to pause import to one step dvd so I can change 60 min tapes.
Posted: Jan 12, 2006 8:37 AM
Hi all
I'm trying to archive mini dv to dvd as easily as possible, my tapes are 62 min
long and if I put 2 tapes into imovie I already exceed buning limit.
One step dvd only lets me import one tape and then decides to complete the task of burning.
Should I buy better software or my other method could be to pipe the camcorder into my panasonic set top dvd burner, but I'm not sure if I'll
lose some quality it only has s video connection and no fire wire.
help
e mac 1 ghz g4 Mac OS X (10.4.4)
Did this topic solve your issue? Report this post
vinestein
Posts: 2
From: vancouver b.c.
Registered: Jan 12, 2006
Re: I'm trying to pause import to one step dvd so I can change 60 min tapes.
Posted: Jan 12, 2006 10:36 AM in response to: vinestein
I've solved my own problem.
While importing to one step dvd and while on that pane I click and hold a word
on the top bar of the screen wich sort of freezes everything and with my other
hand I pause the play on the camera and eject the tape 2 seconds before
the tape is about to come to its end, then load a rewound tape back in and
push play then let go of the mouse or even click one more time on the menu bar. I don't think one step knew what just happened, but there maybe blue
screen recorded while I changed tapes. We'll see.
Brian Christian...
Posts: 1
Registered: Nov 1, 2005
Loading content from multiple MiniDV tapes to one DVD
Posted: Nov 1, 2005 3:05 PM
I am being offered this "One Touch" feature on iDVD to copy my Camera footage to a DVD. I am wondering what the best process is to follow if I wanted to, say, merge :30 minutes of content from one MiniDV and :20 minutes of content from another. Should I be uploading to iMovie instead? If I have the ultimate objective of a. having copies on DVD instead of MiniDV and b. using the content for video editing in iMovie, what is the best process to follow?
1. Move all MiniDV to DVD and then work from that?
2. Import clips into iMovie and move them to iDVD?
Tips, best practices, advice appreciated.
Did this topic solve your issue? Report this post
Len Goff
Posts: 4,344
From: 35 miles West of Lake Michigan
Registered: Jan 17, 2004
RE: Loading content from multiple MiniDV tapes to one DVD
Posted: Nov 1, 2005 3:15 PM in response to: Brian Christian...
Brian,
It's pretty much agreed here that the best storage medium for your MiniDV tapes, is the tape itself.
I tried OneStep once. Yuk. I bring everything into iMovie HD.
1.: No.
2.: Yes
iDVD 5 Getting Started
Apple's iMovie Learning Site
Apple's iDVD Learning Site
Ken Stone: Authoring in iDVD 5
My favorite, by far:
iMovie HD & iDVD 5: The Missing Manual
iPhoto 5: The Missing Manual
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8) My ichatav AIM account is: SDMacuser1 (Please use Text chat prior to video)

Mapping Issue with 7 source tables and one target table in one step

Hi,
Request for a small help in OWB.
I am trying to map 7 source tables to a single target table in one step.These source tables are in Oracle 10G database but dont have PK and FK relation ship.
I am able to link one table to the target by pointing some of the columns. But when coming to the second table it is giving some error message :
Ap18003: Connection target attribute group is already connected to a incompatible data source. Use a joiner or set operator to join the upstream data first before connection it to this operator.
As per the error message I used a Join operator and tried to map the second table to the target but still giving me the same error message. Could some body give me a hand to give out from this step.
Thanks for your help in advance.
Cheers,
Krishna.

Hi,
like this:
Ingroup1
- id -> Number(9,0)
- name -> VARCHAR2(500)
Ingroup2
- my_id -> Number(9,0)
- name -> VARCHAR2(500)
Outgroup
- id -> point to target_table.id
- name -> point to target_table.name
Not:
Ingroup1
- id -> Number(9,0)
- name -> VARCHAR2(500)
Ingroup2
- name -> VARCHAR2(500)
- my_id -> VARCHAR2(9)
Regards
Detlef
null

WS14000044 Completion by Purchaser follwed by WS10000129 One Step approval

Hi Folks,
I have activated the WS14000044 Completion by Purchaser workflow and it works just fine.
My problem is that the approval WF WS10000129 One Step approval does not start automatically when the buyer has completed the SC.
The SC creator has to go to the SC and click on change and then order it before it goes to the approver.
Can this be true?
Thanks in advance,
Thomas

Hi
Please go through these links ->
Start conditions for WS14000044
Re: how to start one-step workflow..
Re: SRM Approval error
Related SAP OSS Notes ->
Note 896376 - WS14000044: No notification when shopping basket deleted
Note 916875 - Incorrect status during completion workflow
Note 1045171 - approval workflow: ACCEPT workitem for purchaser/secretary
Hope this will help.
Regards
- Atul

One Step iDVD does not start

I am using a Sony Digital 8 Handycam DCR-TRV530. I can't get the One Step iDVD function to work. I am using a Pioneer DVR-XD10 DVD/CD writer. The camera is also directly connected by Firewire to the computer. I click on the drop down menu and click on the One Step IDVD function and nothing happens. The camera is supposed to rewind and begin playing the tape while in VCR mode but nothing happens. I don't think the camera is at fault but I'm open to any suggestions.

Yes, I did. To be more exact, however, the camera detects if you are using Hi-8 tape and will automatically begin recording in digital format. What is weird, though, is that about 20 minutes after posting my message the One Step iDVD process began working as expected.
Thanks for your response! Greatly appreciated.

One step cross docking

hi,
i am working on one step cross docking scenorio , i am missing some where in configuration. plz guide me.
steps i followed
i) checked the preallocated check box in omlj transaction for 101 - movt type
ii)entered the preallocated stock details in lt51 transaction.
iii)enter the goods receipt with respect to purchase order in migo.
iv)create transfer order for inbound delivery with refrence to TR.
v)create transfer order for outbound delivery without refernce.
i follow the above steps but still the entry in preallocated stock in lt51 there.where i miss the configuration guide me.
i already view the help.sap.com,i cant understood where i missing the config.
appreciate your help always
muthuraman.d
Edited by: muthuraman d on Feb 12, 2010 2:52 PM

Hi
KIndly check the below OSS notes for the same
559708 - LT51: Deleting and updating preallocated stock entries
556490 - Incor.pre-allocatd actual stock aft.confirm.fm SU bulk stor.
555340 - Preallocated stock table entries are deleted too early
Regards
Damu

How can i erase the contacts I made in the iPad3 by iTunes in one step?

I have synced my iPad 3 with iTunes for all the contacts I had in Outlook-2007,( about 600 contacts ) I got all those 600 into my iPad3. When I backed up with iCloud nothing is seen in iCloud in my PC. I manually added couple of contacts in iPad3 and I could see them in iCloud when again I backed up. What I got from Outlook was not seen in iCloud. Now I want to delete all those 600 contacts from iPad in one step. Is there any one step procedure for this as these contacts are not getting into iCloud.
Appreciate your help.

The Maps app included in iOS, at least as of the current version, requires an Internet connection, so you'll need to get an app that allows you to download maps to be kept on the iPad. MotionX GPS Drive is one such app, but there are others available.
Regards.

OSS connectivity SM59 error

Hi experts,
i am facing one issue, Before 7 days we configured oss connectivity ,it was working fine and also SAP support people worked in PRD server.But i checked yesterday it is not working.and also i checked that router is activated,but in SM59 OSS connection test is failed.Please guide me how to do.
The SM59 error is
Logon
Connection Error
Error Details
Error when opening an RFC connection (LB: Hostname or service of the message ser
Error Details
ERROR: *** ERROR ***
Error Details
LOCATION: SAP-Server MIGPRD_MIP_00 on host MIGPRD (wp 1)
Error Details
DETAIL: NiErrSet
Error Details
COMPONENT: NI (network interface)
Error Details
COUNTER: 3
Error Details
MODULE:
Error Details
LINE:
Error Details
RETURN CODE:
Error Details
SUBRC: 0
Error Details
RELEASE: 740
Error Details
TIME: Tue May 20 18:42:13 2014
Error Details
VERSION: 40
regards,
patan.

Hi Thavaheer,
Mostly, this error cam comes if corresponding ip address of Prod hostname, vip is not in the saprouttab for outgoing connections. Please make sure the hosts ips of all application servers are maintained in the router table.
In SM59, Open the properties of SDCC_OSS RFC, special options tab -> Activate RFC trace and perform the connection test.
Collect the dev_rd log from work directory and paste the details here.
Also, from Prod host : telnet <saprouter_server> 3299
Regards,
Ankit

One step to OSS connect

Similar Messages

Maybe you are looking for