One suggestion for MSI

May I suggest one motherboard for you to build if possible?
Same design of MSI K8N Diamond Plus, 8 or more phases for CPU power, at least 2 IDE ports for 4 drives. 6 SATA Ports. 1 or 2 eSata ports. Nvidia Chipset 590. Keep all legacy components such parallel port, serial port and others similar to Diamond Plus. Passive Cooling of chipset. Ability to overclock. Ajustments for Memory, CPU, NB and SB voltages. Solid Capacitors. There won't be other to beat this.
You can build for Intel and AMD processors! I wish I could find one kind of motherboard with this configuration.
Thanks for reading.
Original.

No need for two dvd burners ,or multiple opticals LOL , no need for IDE drives with 8 SATA ports either.
Want them for backup - make it even safer by putting them in a external HD box (sata or usb) , then they don't have to run all the time
and you just neeeds to fire them up when you need to do backup/restore.
IDE with it's limitation of flip flop transfer signalling between master/slave has become obsolete and is replaced by sata , we just
have to accept that .
The one IDE port is just left there in the NF5 chipsets are for optical IDE/ATAPI possibility -due to the lack of (poor) atapi support over sata controllers.
All SATA controller ports (internal) supports e-sata , e-sata is just the cabling and connector and is obtained
by installing a pci e-sata bracket .
I know a NF590 motherboard that "almost" meets your requirements , except for the IDE controller , but
mods doesn't like discussing other vendors boards here .

Similar Messages

Hey every one ... Does any one suggest for me a good browser for my tablet

Hi
I would like to have a better browser... Every browser i had tried is not good like if i wanna to upload a file i have to choose only from the gallery and nothing on the settings can change it.. I have tried dolphin browser, boat .. Etc almlst all of them but still and the built in browser every time i try to upload something it shut down by itself
Thanks for reading

I FIXED IT!
FYI for the rest of you that might be having the same problem. DON'T USE A BELKIN ROUTER WITH AOL ON A MBP!!!!! It ***** wirelessly. or even hard connected, it won't connect. I went to best buy today, and got a refund on the belkin. I then went to J&R and got a D-Link router. And now it works perfect. I can now chat on AOL yet again, and I tried all the other web browsers I have and messengers, and warcraft 3 online via battlenet. And it works great. I want to give you guys a special thanks for taking time out to answer back to my post. FYI! Belkin wireless G routers do not connect you to AOL wirelessly on MBP's. No matter how much you mess around on them. I highly recommend a D-Link Router. They are easy to set up as long as you READ ( AND I MEAN IT!!!) read the instructions before you set anything up on it. Use the CD that it comes with, and you'll be good to go. Set it up and it works great Almost no dead zones in the house, and now I can use the MBP with all it's cababilities. Thanks people. I really appreciate it.
P.S. I called belkin last night when i decided to get a refund on my router for today and when i talked to the tech, after puersuading him to tell me the truth. And stop BS'ing me, he broke down and admited that AOL does not work wirelessly on MBP's. So to make a long story short this time, There you go. And one last note, I'm very happy now with my d-link router. I honestly thought it would suck. Not being a brand name router or anything. But amazingly, it works like a brand name item! Again, many thanks all.
Bruce

PC Gamer published one review for MSI GS30 2M shadow with gaming dock

MSI’s GS30, with its Gaming Dock, is the first to actually deliver on the promise of using a normal desktop graphics card bolstering a thin ‘n’ light, non-gaming notebook.—Dave James
Highlights:
1.You can switch between thin ‘n’ light laptop to gaming desktop in a trice
2.The dock’s connection to the notebook is a full x16 lane PCIe 3.0 socket.
3.It’s a beefy quad-core, octo-thread processor of Intel Haswell ilk running between 2.8GHz and 3.5GHz
4.There’s also a huge 16GB of DDR3 memory inside that little package too
5.With the CPU and Iris Pro graphics it’s a powerful little thing in its own right.
more detail:http://www.pcgamer.com/msi-gs30-2m-shadow-with-gaming-dock-review/

MSI GS30 with GamingDock is an ingenious idea and it's simply to upgraded.

Suggestion for future release

Where should I post suggestions for future releases of SQL Developer or/and Data Modeler?
Please give me a link.
Thanx,
Chris
One suggestion for Data Modeler:
In the "Model Properties" of a relational model, there should be a "scripts" folder like in the "Table Properties".
In this script I'd like to generate some global statements for the DDL generation,
for example:
before (=begin of generated script): set define off; alter session set nls_numeric_characters='.,'; nls-config
after (=end of generated script): commit; (when table inserts are used and no ddl-statement is following; otherwise you have to use 'commit' in each table-script; After the last table create (ddl-) statement there is no implicit 'commit')
I know, that I can edit the generated script to add my statements, but if you often generate code there is a good change to forget to change the script afterwards.

Hi,
You can submit any feature requests at Oracle SQL Developer Exchange - https://apex.oracle.com/pls/apex/f?p=43135:1:2266866887402592:::::

Suggestions for Oracle ADF learners

Hi ADF experts,
Some one suggest,For Oracle ADF learners must having java knowledge ?
I am new to JAVA & ADF. But I want to learn Oracle ADF. Is java skills must to learn Oracle ADF.
I am Oracle BPM11g developer.So for Oracle BPM11g,Oracle ADF is front end for user interaction.
Guide me.
Best Regards,
KasiRaju.

Core Java should be enough to begin with. If you know the concepts of any OOPS programming language (C/C++), Learning Core Java should be very easy.
ADF is nothing but Oracles version of JSF (Java Server Faces) with UI components. My Point here is, it is Java that sits at the base of ADF. Hence, I would say u Must have Java knowledge to develop a REAL useful page/application.

HT204053 i accidently set up one account for i cloud and one for itunes. suggestions on how do i update this to only the one. please on how do i change my icloud to be the same as my itunes acct. thanks

i accidently set up one account for icloud and one for itunes; suggestions on how to correct this and use just one account for both.... thanks

If you want to change your iCloud ID to another existing ID you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account. To do this, first go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
This will not move your photo stream, however. If you have photos in photo stream that aren't in your camera roll and that you haven't backed up anywhere else you will need to save these before deleting the account. To do this, open your photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos to select them, tap Share, then tap Save to Camera Roll. You can then delete the iCloud account and your photos will stay in your camera roll.

Pls can any one suggest me the Existing Report Name for Active and InActive

Hi all ,
pls can any one suggest me the Existing report name for displaying Active and inactive vendors .
Rgds
Rafi .

hi,
my transaction is VL02N change outbound delivery.

Can any one suggest a realtime audio recorder for Reaktor in Logic please?

Hi all,
So its been a few days so far with Logic Pro 7 on my new intel Mac, I made the jump from PC land and Nuendo and am trying to get up to speed.
What I am in dire need of is an application that I can use at the same time as Logic to record the output of some granular parts from Raktor5.
Basically I am trying to manually do some tweaks on sounds that I just want to be recorder into audio files and then inport them into logic for further editing.
Can any one make a good suggestion for such a think, or does Logic have something similar to this already built in?
Thank you all in advance for the help and past help I have recieved in this forum.
Cheers!

Hi all,
Thanks for the ideas... I went with the recorder box and that solution worked perfect! I used to be on a PC and had a Creamware system that allows for routing of audio any where with as many drivers as you want EG: Asio2, Wave and such at the same time so you could just have (at the time I was using Nuendo3) your DAW up, open an instance of soundforge and start weaking Reaktor ensembles from within your DAW host while recording direct to disk in sound forge with out having to do anything, it worked amazingly well.
This is the next best thing.
Now I just need to spend more time in Logic to learn my way around as I am a new user..
Cheers!

Can any one suggest me useing right way for using cost centers

Hello Guru's
I am in implementation Projec, The client is in Depote Sales process, i just want to know about the cost cenetr and their importance we are creating 20 different cost centers is it really required to create 20 different cost centers, for integrations with MM And SD should i have to take one cost center per plant for Purcase and Sales related activites are should i have to take different Cost Centers Purcase different and Sales different
Can any one suggest which is the right way to use the cost center for integration
Management     0010     DI10100010
Finance & Accounts     0020     DI10100020
HR and Personnel & Admin     0030     DI10100030
Purchase - Equipment     0040     DI10100040
Purchase - Parts     0050     DI10100050
Purchase - General     0060     DI10100060
Imports     0070     DI10100070
Sales & Marketing - Equipment     0080     DI10100080
Sales & Marketing - Parts     0090     DI10100090
Sales - Miscalenous     0100     DI10100100
Exports     0110     DI10100110
Logistics     0120     DI10100120
Services & Technical     0140     DI10100140
Information Technology & Systems     0150     DI10100150
Warehouse     0160     DI10100160
Workshop      0170     DI10100170
Workshop ( Repairs )     0180     DI10100180
Production     0190     DI10100190
Internal Audit     0200     DI10100200
Legal     0210     DI10100210
Training & Development     0220     DI10100220
Research & Development     0230     DI10100230
Moderator: Please, read basic SAP material on help.sap.com

hi,
my transaction is VL02N change outbound delivery.

Can any one suggest me how to use drawPixels method for 40 series devices

Hello!
I am using drawPixels method of DirectGraphics class the code I have written is :-
Image offscreen=DirectUtils.createImage(width,height,0x00000000);// width and heights are integer value
public final int MODEL=DirectGraphics.TYPE_INT_8888_ARGB ;
Graphics offgra = offscreen.getGraphics();
DirectGraphics directgraphics = DirectUtils.getDirectGraphics(offgra);
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,MODEL); // imgData is a int array(int imgData[]) which contains required pixels of image.
The above code is working fine with NOKIA 60 series device but when i use it with NOKIA 40 series device it gives java.lang.IllegalArgumentException.
same time if i use :-
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,DirectGraphics .TYPE_USHORT_4444_ARGB ) ;
// imgData is a short array(short imgData[]) which contains required pixels of image. i have used different formet here.
it works fine with 40 series device,
can any one suggest me how to use drawPixels method for 40 series devices with format
DirectGraphics .TYPE_INT_8888_ARGB .

If Remote wipe is activated it can't be undone. And Once the Wipe is done, the device can nö longer be tracked.
Sorry.

Any suggestions for an all-in-one "cable modem router print server" (N)

any suggestions for an all-in-one "cable modem router print server" (N)?

If that's a problem with your cable company, change the company.
If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
It's like the all-purpose audio device compared to components...

I wish to del one apple id and make one common for mac and i phone, please suggest

i wish to del one apple id and make one common for mac and i phone, please suggest

You cannot delete an Apple ID, you just stop using it. Understand that any apps purchased using that ID can only be updated with it. Apps are tied that ID used to purchase them. If you want to use a new ID for everything, you will need to repurchase any old apps using the new ID.

Can any one suggest a good downloder which work like internet download manager for MacBook

Can any one suggest me a downloder which works lo IDM
I have already used flocks etc..

Just open your Downloads window on your web browser.
MacBook Pros can't run Mac OS X 10.0.x. Please verify in Apple menu -> About This Mac what Mac OS X version you are using, and update your signature.

Power supply suggestions for K7N2G-ILSR

Can anyone offer suggestions for a good solid pwr supply for this board? I recently bought a low-end one and believe it may be my problem. What I have and will be returning is a Raidmax 400w. The specs are:
Model PM-S400W ATX12V
Input: 115VAC/230VAC 12A/7A 60Hz/50Hz
+3.3V, +5V, +12V, -5V, -12V, +5Vsb
28.0A, 30.0A, 15.0A, 0.5A, 0.8A, 2.0A
Suspend mode: Under 27W
Sleeping mod: Under 30W
That's about all the info I have on this PSU.
K7N2G-ILSR NForce2
AMD 2400+
Seagate Barracuda V Serial ATA (80gig)
2 X 256 Mushkin Enhanced PC-3200 DDR
LightOn 52X CD-RW
Radeon 7000 Pro 128 mg DDR

After many attempts to get games to run, upgrading bios, drivers ete.... I was able to get MSI Tech Support on the phone. We tried changing bus speeds, swapping memory, with AGP card w/o etc....
Nothing seemed to work. The tech guy basically told me to RMA the board back with the reseller.
After doing that, I looked more into what else could cause the problem. I had already purchased new memory because I was using Kingston 512 2700 DDR, and purchased the Mushkin 2 X 256 PC 3200. More and more research pointed to the power supply. So I may have jumped the gun by sending the board back without researching fully what could cause the problem. I guess you live and learn. ?(

DDR3 RAM specification for MSI Z77A-GD65

Hello MSIers ,
I am about to buy the MSI Z77A-GD65 or GD55 not sure yet ... I used Gigabyte boards for 10 years and they always state to use 1.5 volt RAM sticks ...
Now for MSI and the mention board , what voltage should I pick ? I want 2 sticks of 4GB DDR3 1600MHz and might look to faster frequencies like 2333 MHz ??? will it work with an I7 3770 right out the box (if I load XMP in BIOS) ? can lower latencies or CAS as well ?
Thanks

Quote from: xmad on 07-November-12, 01:39:05
http://www.mushkin.com/Memory/Redline.aspx
Allot of the mushkin comes pre-under-timed (the xmp profile does anway) As that computer is an AMD platform, I need to match the xmp profile and adjust the fsb/ dram ratio to get the correct speed & timings. Both of those listed computers are quite stable.
The corsair memory I have listed has an xmp profile of 11-11-11-30, I manually under-timed that when I was tweaking. That is the lowest I could go and maintain stability.
One thing to keep in mind when you look at memory, is that almost all that you see out there is 1333 memory which has been tested and tuned (Overclocked) to w/er limit. Even ddr3-1600 you buy will by default run at 1333 as the 1600 is an XMP profile extension to the SPD. So no matter what you buy over 1333, you are most likely going to need to at minimum enable the xmp profile or at worst tinker with the speed & timings manually.
Nice .. Thank you ..
So what DDR3 freq. / timings you suggest for the best performance and stil very stable (as long as I (most likely) need to tinker a bit around the BIOS and XMP) ? I am gonna use the I7 3770 locked version CPU
You advice or against , maybe 2000 freq or more DDR3 with the Z77AGD65 ? or you advice with choosing a lower latency modules but at 1600 MHz freq like this http://www.mushkin.com/Memory/Redline/997056.aspx ?

One suggestion for MSI

Similar Messages

Maybe you are looking for