One take folder is acting weird: flatten and merge deletes the take folder
My other take folders are acting fine, but when I flatten and merge this particular one, it deletes the entire take folder from the track. The other take folders on the track are left alone.
It also shows a blank comp when I click the disclosure triangle to close the take folder. When I am comping the track it is fine and acts normal. I can't get the audio out of the take folder without bouncing it, and that's not good because the waveform is so small in comparision to the rest of the tracks.
you don't need to bounce
Just unpack folder take
or
http://discussions.apple.com/thread.jspa?threadID=2003147&tstart=0
Export as Audio should be easy
(export track as Audio is not the same as Bounce... *it bypass all reverbes and delay on BUSSes...*
of course you need to bypass manually the inserts plugins before export the whoòe audio track...
it will be absolutely the same as original!!!
G
Similar Messages
-
Dears all,
i found Flatten and merge a great feature ( Comp and Take ).
But : it's possible to go back to originary comp once Flatten and Merge command is executed ?
Many thanks in advance.
AntonHey guys, i noticed that if you have flattened the performance (not sure about flatten and merge) you can slice the track (scissors) after say a performance you changed your mind on and you'll be able to then look at other takes (that little arrow will appear on the upper right side).
obviously slice before the take so you don't replace everything leading up to it....... -
Question about Flatten and merge
If I flatten and merge my drum takes, can you go back to your uncomped takes, or is it a case of just save as......
Hey guys, i noticed that if you have flattened the performance (not sure about flatten and merge) you can slice the track (scissors) after say a performance you changed your mind on and you'll be able to then look at other takes (that little arrow will appear on the upper right side).
obviously slice before the take so you don't replace everything leading up to it....... -
If I create a new Apple ID and I delete the old one, Will I lose my purchases and data?
If I create a new Apple ID and I delete the old one, my books, songs, docs and all the data that my old Apple ID contained including my purchased Apps will appear in my new Apple ID and its associated Icloud?
I want to create a new Apple ID but do not lose my data and purchases, How could I do it?Are you entering your Existing Email Address for which you have Access and also are you Entering the Password which Matches Apple Requirement ?
Enter the Email Address that you already have (like Gmail, Yahoo, MSN, Live, etc) but you have never used it for creating Apple ID before.
Passwork Requirement is Minimum 8 Characters, Alpha Numeric and Password should Content atleast 1 Upper Case and 1 Lower Case Letter. You will find the more detail on the same page when Creating Apple Id and iTunes will give you Error if the Password you enter does not match their requirement. -
how do I do to use the same appleid on all my devices, I want to use the last one I have on my Ipad mini, do I deleta the one I have on my Iphone and reeinstall it with the Id I use on my Ipad..?
Hi john,
Yes, you would sign out of iTunes & App Store: Settings>iTunes & App Store, click on the Apple ID, click on Sign Out. Then sign back on with the new Apple ID. Also, if you have an iCloud account with the other Apple ID, you would delete that iCloud account, and then sign on with your new ID: Settings>iCloud>Delete Account.
Cheers,
GB -
I want to upgrade my 2007 Mac desktop to 10.5 Leopard. I am currently running on 10.4.11. When I put the leopard disk into the drive all it does is make a weird noise and then spits the disk right back out. It doesn't do this with any other discs, only this software. Is it still possible to update this computer?
Yes. Try Amazon.
Before you do upgrade to Snow Leopard, make sure your Mac meets the requirements.
Mac OS X v10.6 Snow Leopard - Technical Specifications
Make sure the disc you tried using doesn't have any fingerprints or smudges on it. The optical drive can't read the disk otherwise.
If your Mac won't read the disc, might be a good idea to rule out any problems with the startup disk BEFORE trying to upgrade the system.
Using Disk Utility to verify or repair disks
Message was edited by: Carolyn -
I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
I JUST NEED HELPI would contact Apple under your warranty. I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod.
-
I have a MBP 15" with Iphoto 9. When I right click on icon in dock 3 iPhoto libraries come up; one empty, one with 35,000 photos and one with 30,000 photos. How can I delete the empty library and merge the other two without getting duplicates?
You can delete the empty one by dragging it to the trash ( test everything before emptying the trash)
Merging libraries requires iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - it is the only current solution to merging libraries
LN -
On my iPad 2, one particular recurring event keeps duplicating itself. I delete the duplicate and it reappears a day later. Help.
Do you use MobileMe and an iPhone? If yes, do this in the following order:
Mac:
(1) back up the applications giving you problems
iPhone
(1) Open settings, then open "mail, contacts, calendars"
(2) Open .Mac account
(3) Turn OFF the applications that are causing problems
(4) When you turn off on of the applicatios, a red sign "stop syncing" will appear. Press it. A msg will appear "turning off xxx"
(5) Get out of settings
(6) Don't do anything for about 20 mins. Don't touch your iPhone or your Mac. (syncing needs time to settle down)
After 20 minutes...
Mac:
(1) Open each application that is giving you problems. Fix errors. Back up.
(2) Do this for each application
iPhone
(1) Open settings, then open "mail, contacts, calendars"
(2) Open .Mac account
(3) Slide switch to ON for each app you turned off; there won't be a msg
(4) Get out of settings
(5) Via MobileMe, syncing will start again.
Wait about 20 minutes, again. You should see all in order after that. At least, that was my experience. -
I am having issues get my email in one of my mail accounts so I tried to "DELETE" the whole account. But my phone will not delete a mail account. And the phone is getting really hot and battery was full 2 hours ago and now at 25%.
Well, you don't say what happens when you try to delete the account. So I don't know what else to recommend. However, if your phone is not charging, is that the mains charger or the computer USB? Also, if it not showing any change to battery percentage, then something is wrong with the software. The next step in user troubleshooting after the reset is a restore from backup. However, considering the condition of the phone right now, I would be more than willing to say your backup is going to be corrupt. But you can try. If that does not fix the device, then you restore as new, not from a backup. If the phone works, then you can try restoring the backup again, but if it messes up, you are going to have to restore as new again. If the restore as new does not work, then you need to make an appointment at the Genius Bar or Authorized Apple Service Provider to get the hardware checked.
-
No sound today. Maybe because I turned the sound off on a free game app yesterday but now don't know which one and probably deleted the app.
It's pamonvashon again (the person who posted the question). I fixed it so I'll tell you how in case it happens to you. I was correct. I went back and re downloaded the game, "Virble". At the beginning of the game o I used the buttons on the side of the phone to turn the sound off and on and the sound came on! A miracle! So beware of VIRBLE!!!
-
I have 2 iTunes accounts. How do I transfer my balance from the old account to the new account and then delete the old account?
i dont think that is possible, but then again, anything is possible. probably gonna have the best luck by contacting itunes / http://www.apple.com/support/contact/
-
If several albums have the same song and I delete the duplicates what happen then. Does it remove the song from the albums and just keep 1 song in 1 of the albums?
Thx got my answer not possible, it will delete th esong from the other albumsIndeed, a song can only appear in one album.
To check your library for duplicates use Shift > View > Show Exact Duplicates as this is normally a more useful selection. Keep holding down shift until you have clicked on the text Show Exact Duplicates or it may still use the loser definition.
If you find that you have true duplicates you need to manually select all but one of each group to remove, or use my DeDuper script if you don't want to do it by hand. The script attempts to take account of different types of duplicates which need to be handled differently, merges playcounts and preserves playlist membership. Please take note of the warning to backup your library before deduping. See this thread for background.
tt2 -
My hp support assistance wont run. it keeps stopping during updates and when deleting the temporary
My hp support assistance wont run. It keeps stopping during updates and when deleting the temporary internet files. So it never finishes the process.. help
The failure to remove the Temporary Files could just be due to having your internet connection active during the removal process. For most folks, the amount of data in this directory is minimal. If you want / need to remove the files, you could close your browser(s), make sure your Internet music and TV connections are closed, and then try removing the files manually:
Path to Folder:
C:\Users\--YourAccountNameHere--\AppData\Local\Microsoft\Windows\Temporary Internet Files
Warning:
Do NOT remove the "Temporary Internet Folder" itself. Go "inside" the folder before removing anything.
====================================================================================
The HP Support Assistant is great when it works -- and not so great when it won't cooperate. You can try removing the program from your computer and installing it again. That may work.
Control Panel > icon view > Programs and Features >
Scroll down, find, and Uninstall HP Support Assistant.
Restart your computer after uninstalling the existing version of Support Assistant.
Install Support Assistant
HP Support Assistant
Using HP Support Assistant (Windows 8)
Troubleshooting HP Support Assistant
NOTE: At writing, there are possible issues with HPSA version 7.x -- you might want to sitck with version 6.x for now.
======================================================================================
If you have issues removing your version of HPSA:
Fix problems with programs that can't be installed or uninstalled
=====================================================================================
Workaround to get Updates:
If all avenues fail to bring joy and it just won't work, you can still get your updates from your computer's website.
Install Software and Drivers from HP Website
Go to the top of the HP forum page to Support and Drivers
If prompted, Enter your Country or Region and
Enter your Computer Model information,
Go to Software and Drivers...
Enter your Operating System in the Drop-down menu... Scroll down
Select desired Category
Expand and decide if you need to install that package.
Assure that you download and install only the most recent versions of each driver or program.
Save the appropriate *.exe installation package on your computer
NOTE the name and the location - the *.exe file will likely save to "Downloads “
Install the Software / Driver installation package: If you have ‘Admin’ control, you may highlight the package(s) and “double-click” to install, else Right-Click, Select ‘run as Administrator’ and install.
NOTE: There is sometimes a lot of information at the computer’s website. Be sure to take an extended look at what’s available.
======================================================================================
Good Luck!
Kind Regards,
Dragon-Fur -
Hello, I own a macbook air and I deleted the iPhoto app by mistake, I cant re download it now, do you have any answer for me how to do it?
That's an App Store problem not an iPhoto one. That forum is here
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
but perhaps you just need to try again later, as the message says.
Regards
TD
Maybe you are looking for
-
What is mapLN and why is it eating all our space :)
here's a DbPringLog from a few months ago: <pre> [xoopit@xda-004 ###]$ java -jar ~/###/je-3.3.74.jar DbPrintLog -s 0x00000000 -e 0x0000000a -S <DbPrintLog> Log statistics: type total provisional total min max avg entries count count bytes bytes bytes
-
Safari will not work due to blocked site
I am trying to use my Safari browser a blocked site keeps showing up...genio.com???
-
PO transfer ERROR with PORDCR1.PORDCR102 to SNC
Hi~ PO is transfered from ECC to SNC. ECC Idoc "PORDCR1.PORDCR102 " -> SNC xml "RelenishmentOrderNotification" In SNC, there are application error because of delivery_date field. <Analysis> When we create PO in T/C ME21N, we enter delivery date in
-
Dear All I select particular output type DC print . In that particular output type printing slowly 1 hr what is the reason Thanks and Regards Suresh
-
T500 freezes randomly, often by hdd working applications
My T500 freezes randomly, but i could repeat this status by using e.g. a anti-vir application or by a defragment software. I checked the ram and the hdd, no errors. I have installed all newest drivers vor vista 32. At the windows event manager are so