One time Vendor _ Look for Invoices by VAT number

Hi Guys,
I am looking for a way to find out the invoices for one time vendor base on VAT number.
I need a standard report, because I know that I can search the table BSEC, but I am wondering whether SAP standard offers you the option to look these invoices (pertaining to one time vendor) by VAT number.
Thanks so much in Advance!!
Edited by: angel luis garcia on Mar 9, 2012 5:56 PM

Hi
Check
Copying vendor's VAT registration number into FI Document and
Report on one-item vendor
Regards
Aditya
Edited by: Aadi sharma on Mar 9, 2012 11:54 PM

Similar Messages

Create PO condtion FRA1 "One-time vendor not allowed for this transaction"

Hi all,
When create Freight conditon for po item, if i choose a one-time vendor , it gives me an error "One-time vendor not allowed for this transaction" .
Why it happened? How to config system let one-time vendor be the conditon's vendor ?
Thanks .

dear wayne,
what is your account group for the vendor if OTA (one time account ) is ticked for that account, the system will not allow you to give the condition type FRA1.
Please correct me if I m wrong and revert back if any doubt.
Njoy
Ashish

International version for one-time vendor

Dear all,
is it possible to bring out the international version screen when booking the one-time vendor invoice?
Thanks and regards

Hi Tao,
I am facing the same problem. I maintain the international address versions for TW (language ZF - Chinese tranditional). It works just fine for regulat vendors, however when it comes to a one-time vendor (account group CPD), I can only enter either the English or the Chinese name in the one-time vendor screen, during the invoice entry.
I checked the international version is maintained in FK02 of the one-time vendor. Where and how do I enter the vendor name in EN anf ZF in the same document?
I also am struggling with the account holder field, which is unavailable for one-time vendor.
Please advise.
Thank you,
Inna

PAN number for one time vendor

Hi,
At the time of transaction against one time vendor with deduction of tds at the time of document saving
system are giving error "PAN number not available'"
Can any body infm me where we should update the PAN number for one time vendor as if we update the PAN number in one time venodr cin tab then for every one time vendor system is showing the same number ,
So pl suggest where we should maintain PAN number of one time vendor
I am in ECC6
Regards
Vijay

Hi,
In the Creation of Vendor master data, CIN Tab shows onthe menu bar ther you will assign the PAN number .
If the TAB is not shown , assigned in the t code OMT3E select user screen reference and select New Entries and maintain the user and the counry.
May I hope this will helpfull
Regards,
Kanike

Block one time vendors for PO but allow for RFQ

Hi Gurus,
I want to use One time vendor records only for RFQ creation;but it should not be possible to create PO using those one time vendors.
In case of regular vendors for RM/PM, quality info records in purchasing is active. But this is not the case of indirect purchases.
Please help.
Regards,
krishna

Hi,
In XK05 transaction u have the option to block vendor for different application.
U can block for Purchase order.
Check in XK05 and block appropriately and check running the scenarios.

One-time vendor reports

Hello,
we are thinking of using the one-time vendor functionallity but we would like to know if there is any standard SAP report that enables us to list all the invoices which have been entered against the one time vendor account and see amount, date, document number, etc... and real vendor name (entered in the invoice) plus bank details.
Many thanks for your help/answers in advance
Jordi

Dear,
Usually one time vendors have account group as CPD or CPDL. If FBL1N is suitable for you to get desired output, go to dynamic selection and select account group as CPD and CPDL execute ther report.
Regards,
Syed Hussain.

EDI FI Invoice and One-time vendors

Hello all,
I'm trying to integrate an FI Idoc ( INVOIC02 ) on a one-time vendor and I get this error :
<i>No batch input data for screen SAPLFCPD 0100</i>
I has a look at IDOC_INPUT_INVOIC_FI and the interface creates a batch input to create the invoice. I guess wen creating an invoice in FB01 on a one-time vendor there is a popup (SAPLFCPD 0100) to key in vendor datas. It seems that IDOC_INPUT_INVOIC_FI doesn't managed this screen (i've tried to fill my idoc with vendor detail) because this screen is never generated.
Does someone have any additionnal information on that or have already managed to process and create an invoice on a one-time vendor via EDI ?
Thanks in advance
Jean-Michel
ps : points will be rewarded
Message was edited by:
Jean-Michel Brunod

I am facing the same problem now. Have not found anystandard processing yet. Still targeting manual implementation.
Standard solution would be appreciated in any case.

Purchasing report for one time vendor

Hi,
I am using ECC 6.0
What standard report is available to display purchase order, GR and invoice belonging to one time vendor (CPD account group) ?
Thanks for your help.
Kind regards,
Yann

Special GL transactions (like down payments) are not allowed for one-time vendors. Please refer to the following SAP Note.
https://service.sap.com/sap/support/notes/19638

One time vendor invoice

Hi Experts,
I noticed that when I create invoice for one time vendor, the vendor data fields available is different with the normal vendor master data fields.
Example : in normal vendor master data, there's field Street4. In the one time vendor master data there's no street4.
Is it possible to add fields in the one time vendor data entry screen during transaction (e.g FB60)
Thanks
-M-

Hi Nikitha,
Are you refering to SPRO-Financial Accounting-Accounts Receivable and Accounts Payable-Vendor Accounts-Master Data-Preparations for Creating Vendor Master Data-Define Account Groups with Screen Layout (Vendors)
I'm aware that this would control the fields (optional, required, suppress) for vendor master data based on account group.
I've tried to set the field Street4 - optional.
My question is ... During the transaction, let say FB60 (create vendor invoice). When I call one time vendor account, a pop up screen to enter the vendor data appear. And the field Street4 still not there.
So, is there any configuration to add fields for that ?
Thanks,

Use of field STCEG in One-Time Vendor PopUp for non EU Company Codes

When enter a One-Time Vendor invoice by FB60 or MIRO transaction for Company Codes in non EU-member countries such as Switzerland, Norway or Canada the field VAT-registration number, STCEG, is hidden even when they should have a similar treatment. The field needs to be open when the local legal requirements are the same. How to activate the field for these countries?

Hi Shriharsh,
Why do you want to use one time vendor in this scenario? If in the current legacy system seperate data is maintained for all the vendors, then do not go for one time vendor.
Create the vendor master for each vendor or for the group of vendors.
You can do Auto generation of PO at the time of GR, that is best suitable for this scenario.
Regards,
Sheetal

PO Out Put Determination for one time vendor

Dear all;
For one time vendor master record from where the system will pickup the vendor specific data ,esp. fro whichj table and which field .Kindly reply in details .
Thanking you;
Regards;
Joydeep Mukherjee

Hi
In one time vendor we have to give vendor address and bank details manually while creating Po and Invoice respectively
for vendor related table
LFA1 - Vendor Master: General data
LFB1 - Vendor Master: Company data
LFM1 - Vendor Master: Purchasing Data (Purchasing organization)
LFM2 - Vendor Master: Purchasing Data (Plant, Vendor sub-range)
Regards
Kailas Ugale

Two reconciliation account for same one time vendor

Is it possible to have two reconciliation account for same one time vendor?

Hi
1.Two reconciliation account for same one time vendor IS NOT POSSIBLE.
2.create 2 vendor master for the same ONE TIME VENDOR and maintain the recon account accordingly
3.Multiple recon a/c can be assigned to a vendor only thru spl g/l indicators but if u go thru this way then we cant use the purchase flow of PO-MIGO-MIRO . Vendor invoice can be passed only thru fb60 using spl gl indicators. Spl gl indicators cannot be used in MIRO.
Check which will help u
Thx
Raja

How to get pan number in FB60 for ONE TIME VENDOR

Hi
While creating invoice for one time vendor system is throwing error 'PAN NUMBER IS NOT MAINTAINED 'FOR THE BUSINESS PARTNER.But in the screen of FB60 there is no field for pan number in ECC 6.0.But in 4.7 it is considering
the fieldTax Number1 value as pan number,
can any one guide me how to proceed , is there any enhancement.
thanks in advance.
suresh.

Hi Deepti,
Surely you know it now, but see SAP Note 550431 - FAQ: BAPI in sales - general questions, question 7: "Question: The BAPI was processed successfully. Why does the document still not exist or why was it not changed?".
In the other hand, do a trace with tcode ST05 and check why it locks the document during this time. I am not sure, but perhaps you have an updation of SIS so large.
I hope this helps you
Regards
Eduardo

Vendor down payments for one time vendor

Hi There,
I am not sure why this is happening, but when we try and post a down payment to a one time vendor, it comes up with the error F5 265.
When we do this for a normal Vendor it is OK.
Has anyone come across this?
Is there some special config required to activate one time vendors for Down payments?

Special GL transactions (like down payments) are not allowed for one-time vendors. Please refer to the following SAP Note.
https://service.sap.com/sap/support/notes/19638

Get customer invoice address from one time vendor

Hi All,
I am working on cheque printing.
I have a question with in that.Customer wants if Vendor is one time vendor.
I can identify the one time vendor using 'LFA1-XCPDK is 'X' then the customer invoice assress priting in screen
How can identify the custome invoice address from one time vendor
Please any suggestions are helpful

Hi Tarangini,
I hope it is a third party scenario. Get the sales order number from the purchase order created with that vendor. EKPO table contains PO line item with sales order as the reference document.
From the sales order , get the invoice from VBFA table. Pass this Invoice number to get the customer from (VBRK). Pass this customer to (KNA1) to get the address number. Pass this Address number to ADRC to get the customer address.
Regards,
Sai

One time Vendor _ Look for Invoices by VAT number

Similar Messages

Maybe you are looking for