One Touch Recovery Software for XP for G550 94Q model

Please post the driver link for One touch recovery software link for G550 94Q model. I found drivers for Vista but not for XP...

Thanks, I'll give that a try when I finally get the Windows 7 upgrade disk.
It seems ridiculous that Lenovo doesn't support this product for Windows 7, especially when they mentioned the "FREE" upgrade (with ridiculous "shipping and handling charge") to Windows 7 on the web page where I ordered it. Being a reasonable person, I assumed that when they offered a "Free" upgrade to Windows 7 with the PC, they would also provide the basic software to allow the built-in hardware like webcams to keep on functioning as they did under Vista.
Had I known that they would refuse to offer any software on disks or download, I would have ordered a DELL or some other PC that has a reasonable level of customer service. I am not a typical user; I don't call in for customer support. All I need is the software and drivers, and I will install it myself.

Similar Messages

  • G460 became very slow after installing windows 7...help with one touch recovery??

    hi ...i got a laptop from friend  9 months ago from us ....its g460 with windows 7 home premium os...for practising sharepoint tech: i installed windows 7 ultimate 1 month back and after that i tried to install .net and sharepoint s/w with no use...after that whenever i start its taking neary 15 mins to start itself and then its saying windows s7 is not genuine...si i called up service center and they said that s/w instllation they dont cover under warranty ..and they are charging around sme 2000 bucks to install windows 7 premium  and said that we will also provide one touch recovery...
    cant i with online support do the one touch recovery and get back the laptop in the previous state?? what is this one touch recovery all about?? is it only for data ?? thanks in advance.

    hey durgamavu,
    Do check the following >>
    http://consumersupport.lenovo.com/%28S%28wjgnfm55b​e4kejqew1t0nj55%29%29/lk/en/HintsandTips/hints_sho​...
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • One touch Recovery feature not working

    THe one touch recovery key feature is not working in my laptop. Initially I used to shut down my system and press the key. It was working well. If I press the key the system gets booted normally and it doesn't goes to the recovery panel. Kindly help me in trouble shooting it
    Thanks in Advance

    hey rajeshmurali,
    i suggest uninstalling the software, then go to >>http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers.html
    download the latest version of the software and reinstall.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

    hi,
    I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from  my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7.  i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

    Hi there,
    I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
    At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Data Recovery Software for Mac.

    I have 2 questions regarding data recovery from an external drive (WD My Book Essential).
    1. During a Bootcamp install, the backup taken using WD Smartware software has been replaced by a Windows folder and I cannot read the drive after reinstalling SL on my Mac Mini to retrieve my backup. If I erase the drive (as the software is asking me to do), can I then recover the lost backup files using data recovery software or will the file system on the external drive cause a problem. (Format is NTFS)
    2. Which data recovery software is best for for use on a Mac? Or do I recover using Windows software instead?
    Thanks.

    If you want to recover data from a Windows partition, you probably need to use Windows recovery software. I'm not aware of any Mac data recovery software that can work with an NTFS partition, though there might be something out there I've missed. Do not erase the Bootcamp partition before attempting to use any recovery software if you can possibly avoid doing so (use Windows volume repair software if the volume won't mount); that will just make the recovery far more difficult.
    Good luck.

  • Maxtor One Touch III not showing up on Mac OSX or Windows

    ok so i have this Maxtor one touch III external hard drive that i used to use with my XP computer a few years ago... its 500 GB. so i plug it in to my Mac and install the software and it doesn't show up on my desktop or my disk utility. although, it does show up in my system profiler. so, it didn't work for mac... then i went onto my parallels account that has windows 7 on it and it still doesn't show up. what can i do to fix this?

    SynGatesFan200 wrote:
    Connection: USB
    Version of parallels: 5.0
    Section in system profiler: USB (shown as One touch III)
    Software used: maxtor installation disc for one touch III (windows), downloaded maxtor one touch 4 software (mac)
    Hi,
    all this, with the exception of the Maxtor software, should indicate a no-problem with that HD.
    Personally I have always avoided the provided software, since it is not needed for external HDs.
    If you have access to a Windows PC try connecting the HD there and see what comes up.
    And if you don't have valuable files on that HD, you might repartition it there as well.
    Could be a rare case of a 'dynamic disk' http://support.microsoft.com/kb/314343/en-us which is something that Macs can't handle.
    Regards
    Stefan
    Message was edited by: Fortuny

  • JSplitPane - disable dragging, keep one touch buttons

    Hi, using JSplitPane to display two components and the one touch buttons are very useful for showing one or the other or both of them in a fixed ratio of size to each other. However the actual dragging of the JSplitPane just allows silly sizes to be set for the components so I want to disable the drag action of the JSplitPane bar but keep the onetouch functionality. The UI classes look complicated :-(
    Anyone done this before?

    Hi, using JSplitPane to display two components and
    the one touch buttons are very useful for showing one
    or the other or both of them in a fixed ratio of size
    to each other. However the actual dragging of the
    JSplitPane just allows silly sizes to be set for the
    components so I want to disable the drag action of
    the JSplitPane bar but keep the onetouch
    functionality. The UI classes look complicated :-(
    Anyone done this before?A quick solution might be to set the preferred size of the components so that no "silly sizes" can be set.

  • Software for Power Switch Control and One Key Recovery for Windows 8?

    Hi. I have recently upgraded to windows 8 with a clean install. I was wondering if there is software to get the power switch control software back so I can set it to auto, turbo or cool because without it I think using the switch is useless. I also would like to know if there is a way to get one key recovery back.

    I can't use the One Key Recovery of my Y2P anymore, as I decreased the size of the C partition in favour of increasing D:\Data
    OKR won't even start anymore...
    Any chance to get OKR working again if I make these partitions the same sizes?
    Who has the exact partition sizes in MB of the Y2P 20266 with Samsung PM851 256 GB SSD?
    0 1 MB  NO_NAME unallocated
    1 1000 MB  WINRE_DRV NTFS  
    2 260 MB  SYSTEM_DRV  FAT32 (EFI)
    3 1000 MB  LRS_ESP FAT32
    4 128 MB  NO_NAME Other
    5 ? GB  C:\Windows8 NTFS
    6 ? GB  D:\Data NTFS
    7 14135 MB  PBR_DRV NTFS Recovery
    8 327 kB  NO_NAME Unallocated
    Data is backupped daily and I already have a full system backup together with a bootable USB stick that has been tested.
    But I like to make sure I can reinstall Windows in the future..
    Freedom of Speech has just left the building

  • Where is the software for the Lenovo G550???

    I want to do a clean install and replace the pre-installed Vista with Windows 7.
    I see that the Lenovo G550 download page has drivers for Windows 7, but where is the pre-installed software, like Veriface, camera software, and all other pre-installed Lenovo software? I looked at all OS options for the G550 on the download page, and NONE of them had the G550 laptop software, all they had for each OS option was only  the drivers.
    I understand that I can make a recovery DVD, but as I understand  it, it will return the system to the factory fresh state (all pre-installed programs installed, but also with the factory installed VISTA  - yuck!). I didn't see any option to only re-install the  Lenovo software without also re-installing the OS.
    When I look at the download pages for other Lenovo  laptops, I see that they have drivers AND SOFTWARE, but the G550 has no software except for the drivers. Since the G550 came with no software disks, and there doesn't seem to be any of the software online, how exactly does one do a clean installation of an operating system, and then re-install the Lenovo software, on a G550?
    I was able to find downloads of programs like Veriface on the Lenovo site for different laptop models, but unfortunately those were much older software versions, and for a different Operating system.
    Why can't Lenovo post all of the software online? If they aren't going to provide the software on DVD when they ship the PC, then they should at least have it online; so that people can do a reinstallation if necessary. DELL doesn't seem to have a problem putting all of the software for their PCs online, and they also provide it on disk with the PC.
    Do I have to find the hidden backup partition and then copy the Lenovo software installation files to a DVD or different drive myself? Has anyone done this, and if so, can they please provide some assistance as to the best way to accomplish this task?
    If there is a different/easier way to accomplish my end goal of a G550 with a Windows 7 clean install, and also with a re-installation of all pre-installed Lenovo software, I would be extremely grateful for any assistance. If there is also a way for me to select which factory software I wanted to install, that would be even better ( I don't need all of the crapware that came on the PC)
    Thanks in advance,
    Sven

    Thanks, I'll give that a try when I finally get the Windows 7 upgrade disk.
    It seems ridiculous that Lenovo doesn't support this product for Windows 7, especially when they mentioned the "FREE" upgrade (with ridiculous "shipping and handling charge") to Windows 7 on the web page where I ordered it. Being a reasonable person, I assumed that when they offered a "Free" upgrade to Windows 7 with the PC, they would also provide the basic software to allow the built-in hardware like webcams to keep on functioning as they did under Vista.
    Had I known that they would refuse to offer any software on disks or download, I would have ordered a DELL or some other PC that has a reasonable level of customer service. I am not a typical user; I don't call in for customer support. All I need is the software and drivers, and I will install it myself.

  • Data Recovery Software for the Zen Vision M

    Data Recovery Software for the Zen Vision M:
    Has anyone had any success recovering lost sound files from a Vision M, with software, physical repair services, or otherwise? Does anyone claim to be able to recover information from these devices?
    The data recovery programs I have tried fail to recognize the dri've, since it doesn't show up in list of dri'ves for some reason (Is there a way to make this show up?). Any suggestions/ recommendations would be greatly appreciated as I lost over a year of recordings after an unexpected forced reformatting. How would one even go about finding someone for this job?
    Thanks, GW

    Haven't really tried the data recovery so I would like to know more about this one too.
    http://storeyourpicture.com/images/s...lectronics.jpg

  • Problem with One Touch Access for N95 8GB

    Hi,
    I'm having problem connecting my N95 8GB to the Internet via NSeries One Touch Access PC Suite using my Bluetooth. I can connect via cable but bluetooth I cannot.
    This is the error message giving me:
    "Failed to connect to the network! One Touch Access could not connect to the selected device."
    Pls help and advise. Tnx in advance.
    Br,
    PeteMessage Edited by pmpinguel on 24-Nov-200712:31 PM

    I found a situation where your error message appears. It is the case when the nokia is connected using the data transfer mode and simultaneously the OneTouch Application is started. Then the device is not recognized by the modem software. The PC Suite mode is required for the OneTouch Application.
    In my situation I think I already saw all of the possible error messages described in the documentation during the various experiments.
    For example I tried to uninstall and reinstall the cable drivers. Unfortunately the driver page of N95 8GB does not include them only the page of N95. This was a step towards success - what concerns the OneTouch Application.
    Sometimes it is useful to switch off and on the phone, specially when it is not possible to connect with the modem driver.
    In my opinion the possibility of completly uninstalling the Nokia Suite is missing. You can uninstall all parts but after reinstallation the Nokia Phone Browser is no more available, the icon is not displayed. All the software packages are working fine even the modem drivers but not the Phone Browser.
    Franz

  • Product recovery software for Intel graphics adapter

    Friends,
    In the Product recovery software, I am unable to find the file for graphics installation and there is no readme file to guide.
    The disc has to 2 folders 1) i386 and 2) Tools
    In the tools there are 2 exe files
    RecoCHECK
    RecoFastCRC
    RecoGUI.lng
    RecoUNPACK
    Please help to find which software to run .
    regards,
    Dhiraj Shetty

    Hi there,
    again,
    I posted an answer on your question about graphics drivers. Did you already checked it?
    If not, I will give an short explanation about recovery medias and then again a link where you can find the graphics driver software.
    A recovery media is a packed image of the Windows installation on your harddisk. Which means you CANNOT extract any software out of it.
    You can only recover your machine with it, and nothing more.
    So we reach now the point where I give you the link (again) to find the graphics driver you need:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    So please (again) check the site, choose your model and download your drivers.
    And please: dont post the same question twice or more. Its enough when you post one topic and just edit the topic to add more questions/content.
    This keeps the questions clearly and everyhting overviewable...
    Greetings

  • S205 - Steps to create a bootable USB drive using One Key Recovery (OKR) for backup image.

    Hi Guys,
    I just got my new S205.  I am wondering how to backup the Windows OS including all factory settings to a bootable USB drive using One Key Recovery (OKR) 7.0. Basically I am afriad one day, my harddrive is failed or if I want to replace harddrive, I can reimage the harddrive back to factory setting and its OS (win 7).  Would you share with me on the steps to do so?
    I opened the OKR software and click on "Create Recovery Disk" -> "Factory Default Setting Disk" and Next,  I couldn't see my USB drive? any one knows why?
    thanks in advance.
    New S205 owner.

    I was able to do this, but it required reconfiguration of the HDD in my S205 (320 GB hard drive).
    I used the built-in Windows Disk Management tool to shrink the size of my C: drive to 56,320 MB. [To accomplish this, I had to disable hibernation, and disable the swap file on the C: drive; and then re-enabled both after the process was complete.]  56,320 MB is more than enough space for the OS and all of the programs that I have installed (including the Professional version of Microsoft Office).
    I then increased the size of the D: drive to 233,614 MB.
    You can use different drive sizes, of course, but the D: drive must be of adequate size for the backup image.
    Once the HDD is reconfigured, you can use One Key Recovery to backup your C: drive to your D: drive.  From there, it can be copied to a USB (or copied across the network, etc. ... I've done both). Yes, it is 2 steps, but it's really easy.

  • Recovery Software for Disk Image Backup on External Drive

    Hello. I am currently running OSX Yosemite on a mid-2010 Macbook Pro. However, before I upgraded from OSX Maverick I installed a SSD as a boot drive and moved my original Toshiba HDD to the optical bay for media storage. Before the installation, I purchased a LaCie 1TB external hard drive, formatted it, then dragged the entire Toshiba HDD image from the desktop to the external HD. That image is visible on the external HD but is inaccessible by Disk Utility, whether I use it from the HD, the SSD, or the Installation DVD. All scans and attempts to mount and open the image fail. I realize now I made a mistake by not cloning the Toshiba HDD onto the external HD before starting but the image size (on the external HD) is 187GB, which corresponds with a somewhat compressed ~220GB (the original size of the Toshiba HDD). Therefore, it seems as though the files are present and intact, albeit currently inaccessible.
    Is there any way to recover the files from the disk image, i.e. via Data Recovery Software such as Data Rescue 4, Stellar Phoenix or R-Studio? Alternately, could I use the same software to recover the now deleted files from the wiped and reformatted Toshiba HDD? I'm having trouble accepting that the 187GB of data on the external drive are really gone, as it represents over a decade of media collection and contains many irreplaceable files. I'm hoping there is something that can be done before spending a lot of money on clean room data recovery services. Please help!!!
    Thank you in advance as any and all advice is very much appreciated.

    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

    How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
    Thank you for any help you can provide.
    Arup

    This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
    In the meantime..
    Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
    With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
    ie
    You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
    Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

Maybe you are looking for