One TPV for multiple Countries

Hi Experts,
Could you pls share experirnce/knowledge around having one TPV for multiple countries together. The scenario is like below:
1. There are mutiple Countries in Central America which are small islands for whom we need to roll out the Travel and Expense Solution.
2. The Company code is only one which contains employees from all these Countries.
Could you tell us how can we do the setup. Should we create one TPV at the company code level. OR should we rather use some other criteria for selecting the TPV maybe at the Personnel area or Personnel Sub Area level.
Your help is much appreciated.
Regards,
Vijay

Hi Kiron,
These things I am aware about too. My real question is if I create only one TPV for the company code and assign the Country of the Company code then what issues would this cause. To name a few pls see below.
1) The domestic Country would always be the Company code Country so would be treated as Domestic Country and show on the Form also as domestic Country even for the employees who are from other Countries.
2) There are setting which SAP allows differently for Domestic and International like per diem, miles cumulations. So these necessarily have to be kept as same even though local laws are different in all these countries as Domestic is only the Company code Country.
So I need detailed analysis of what impact I will have by having only one TPV as against making many TPV like one for each Country by using some other parameter like Personnel area/Personnel sub area etc.
Appreciate your help!
Regards,
Vijay

Similar Messages

  • Can i install itunes multiple times on one computer for multiple users?

    Can i install itunes multiple times on one computer for multiple users?

    Like most applications you only need to install it once for it to be available to all users. (That said it is possible to install an application and only make it available to the current user, but that's rarely needed.)
    tt2

  • How to create one delivery for multiple sales order

    Hi!! Friends,
    Can some one explain the steps to be followed in creating one delivery for multiple sales order in SAP SD.
    Regards
    AKASH
    Message was edited by:
            AKASH TAMBI

    Hi.,
                  You can combine different orders in to one delivery ,But for the customer Order combination should be checked in  the sales area data of the shipping tab,we can combine orders but the ship to party,Route,Inco terms,Shipping date,shipping point should be same,you can do in T.code VL04 & VL10
    REWARD if helpfull
    Thanks & Regards
    Narayana

  • How to create one TO for multiple TRs

    Dear All,
    how to create one TO for multiple TRs, kindly suggest me
    Regards,
    balu

    As for your question: it is discussed in sAP online help:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
    Sorry I misunderstood your question.
    The above mentioned solution won't create one single TO from multiple TR.
    Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

  • One invoice for multiple deliveries

    Hi Gurus,
    Can any one tell how can i create one invoice for multiple deliveries.
    Regards,
    Vinod

    one invoice for multiple delivers we can do in vf04
    we can do in vf04
    reward points if it is help ful
    Thanks
    mubeen
    Edited by: mahammad mubeen on Mar 5, 2008 10:02 AM

  • One cheque for multiple vendors

    hi,
    is it possible to generate one cheque for multiple vendors ?
    cheque will be sent to bank and bank will deposit the amounts into vendor banks.
    Can you anybody help me?
    regards,
    kalyan

    Hi
    Yes. you can do it 
    First transfer the amount to bank and from there bank will transfer the amount to respective vendors through ther banks.
    Go for implementing automatic payment programme according to your client reqyuirement. Check  TCode F110 which is master transaction for APP.  Check at TCode F110-Environment-maintain Config.....
    Cheers
    Srinivas

  • One lockbox for multiple company codes

    Is it possible to have one lockbox for multiple company codes?

    No, I don't think so. Lockbox is 1:1 for a Company Code.
    You configure Lockbox for a Company Code.
    You can use one of the 2 available Lockbox user exits (not sure which) to write a piece of code that searches invoices against the customer posted to different company codes. You will have to have the intercompany setups.
    You may find an OSS notes for intercompany clearing.
    Hope this helps!

  • One delivery for multiple STO's

    Folks,
    I have multiple STO's for the same ship-to (plant). Items due for shipping would need to be combined into 1 delivery and not 1 delivery per STO.
    Would this be possible? And if yes, how?
    Thanks,
    MZ

    Hi ,
    Yes , We can create one delivery for multiple PO's .
    Go to VL10D tcode --> Purchase order tab -- > enter the STO's and press execute
    Select the STO's and click on background tab. Then it creates the log
    Select the item again and press shift +F4
    It will gives the log inforamation for the STO's and select the item and press on documents tab.
    It will creates only one Delivery for all the STO's.
    Now go to VL02N tcode and enter the delivery number then goto picking tab then enter picking qnty = delivery qnty
    then press on " post goods issue "
    Now go to MIGO to do the goods reciept then enter all the STO's here and check the item then save .
    Only one document will be posted for all the STO's
    Regards,
    Usha.

  • One OCS for multiple Company´s ???

    Hello,
    It´s possible to install multiple "areas" on one OCS? We want to provide a OCS for our customers. They shouldn´t see other caledars or adress-book. Only ther own "area".
    KR
    Mathias

    Hi ,
    Yes , We can create one delivery for multiple PO's .
    Go to VL10D tcode --> Purchase order tab -- > enter the STO's and press execute
    Select the STO's and click on background tab. Then it creates the log
    Select the item again and press shift +F4
    It will gives the log inforamation for the STO's and select the item and press on documents tab.
    It will creates only one Delivery for all the STO's.
    Now go to VL02N tcode and enter the delivery number then goto picking tab then enter picking qnty = delivery qnty
    then press on " post goods issue "
    Now go to MIGO to do the goods reciept then enter all the STO's here and check the item then save .
    Only one document will be posted for all the STO's
    Regards,
    Usha.

  • One inventory for multiple ORACLE_HOMEs ?

    RDBMS version:11.2, 10.2
    Platform : AIX
    In one server , we are going to install multiple ORACLE_HOMEs (both 10.2 and 11.2). I have been asked to configure separate inventory for each ORACLE_HOME (each inventory within its own ORACLE_HOME). But i came across OTN posts which advices one inventory for all ORACLE_HOMEs .
    1. How can i create 1 inventory for all ORACLE_HOMEs . Is it by specifying an inventory directory outside all ORACLE_HOMEs in OUI when you do the very first installation ?
    2. Which one is more professional : one inventory for each ORACLE_HOME or one inventory for all ORACLE_HOMEs ?

    When installing Oracle software for the first time, the OUI will create a "global" inventory under $ORACLE_BASE.
    Depending on you OS, to locate this inventory look at "/etc/oraInst.loc" (AIX+Others) or "/var/opt/oracle/oraInst.loc" (Linux+others).
    You can add/remove Oracle homes from this inventory by using OUI or command line ./runInstaller.
    Each Oracle home may also contain an "$ORACLE_HOME/oraInst.loc" file.
    HTH
    PS: +"One inventory for multiple ORACLE_HOME is a bad practice"+ -- Untrue. Perhaps only for those that don't know how to use it.
    :p

  • Shall I use one datasource for multiple connection pool?

    Hi,
    I need to clarrify that, Shall I use one Datasource for multiple connection pool in distributed transaction?
    Thanks with regards
    Suresh

    No. If its transactions across multiple databases you should use different datasources.

  • How to schedule one report for multiple company code?

    How you can schedule reports in BW 3.5? Suppose I need to schedule one report for multiple company code, how can you do that and notify the users? I do not want to send multiple emails to the same user if the report runs for 20 times (for 20 different companies).
    points are given for ASAP replies.
    Thanks in advance
    Peter

    Dear Peter,
    Try to restrict the Company Code with  those 20 values and schedule.
    Regards,
    Ramkumar.

  • HCM Processes and Forms : Using single Form Scenario for Multiple Countries

    Hi ,
    I have a requirement to design a HCM P&F form ( Single Process, Single Form Scenario ) to support multiple countries.  Form fields should be visible/invisible based on the country ( derived from the login Manager).  please help me with the following questions.
    1. Is it right way to enable/disable the fields in the same form scenario for multiple countries ( Approx. 20-25 countries)
    2. Is there any limitation to no. of fields on the form? does the form performs well with multiple dynamic conditions?
    3. If yes, what is the best way to do this? through Java Script / Back end Generic Service?
    Thanks in Advance,
    VR.

    Hi VR,
    1. Is it right way to enable/disable the fields in the same form scenario for multiple countries ( Approx. 20-25 countries)
    -You can use same form scenario or process for multiple countries if you are using fields based on international structure HCMT_BSP_PA_XX_R*. If you intend to use country specific fields then you may like to use different form scenario for different countries.
    2. Is there any limitation to no. of fields on the form? does the form performs well with multiple dynamic conditions?
    - As such there is no limiation for the fields.Yes, form performs well with multiple rule configurations.
    3. If yes, what is the best way to do this? through Java Script / Back end Generic Service?
    I interpret you would like to derive & show fields based on same backend logic, in that case you should generic service.
    If you want to show fields based on manager's logon then you should also use authorization BAdi.
    Regards
    Pooja

  • Can we Exceucte campaign for multiple countries and Regions?

    Hi Experts,
    can we execute the campaign for multiple countries and Regiong at time? or
    Aany standard functinality for this type of requirement?
    thanks in advance,
    Regards,
    Prameela

    We don't support merging of multiple responses at this time. You could export your data and use an application like Excel to do this type of merging for you.

  • How do I use one layer for multiple pages?

    I've been using Photoshop to create a series of web pages. I have about 20 such pages right now.
    Unfortunately, I need to change the navigation menu that is found on all 20 pages.
    To make these changes, do I need to change 20 different files? Or is there a way to link one layer group to multiple PSD files so that editing it once results in it changing on all 20 pages?
    Thanks,
    C

    You'll have to make some sort of change to each document, but it should only take a few minutes when there's only 20 of them. You edit the group in one, then for each of the others, simply duplicate or drag the edited group into it and delete the old group.
    There is also the option of structuring your workflow with Smart Objects which can be refreshed in each document with a common document containing only the menu group. For linking of Smart Object content, there is a third party plug-in but I don't know whether it is reliable.

Maybe you are looking for

  • Adding multiple devices from different users to one find my iphone account.

    I want to add my daughters iPhone to my "Find my Iphone" app in iCloud. She has her own apple id. How can I do this? I have my others daughter on there and I dont know how i did it.

  • Retriving of data

    how to retrive data lost while updation the i phone Please help special contacts

  • How to use cursor function for nested xml

    Hi, i have a query for XMLQuery like select * from bills where bill_id=???? it results in something like <bills> <bill> <city>london</city> <amount>44</amount> </bill> <bill> <city>london</city> <amount>988</amount> </bill> <bill> <city>new york</cit

  • Setting alternate row color of DataGridColumn

    Is there a way to set alternate row color of a DataGridColumn? I need to set different alternating row color to different DataGridColumn.

  • XML Update - Edit in Place

    Hello, I have XML file with some urls path (links). I'd like to see the user editing (delete, change, add) that link page using a Edit in Place method. Can this be done using spry fw? What are the best approaches for this using spry? Thanks in advanc