One User has wrong Exchagne Server Settings in Outlook, showing Exchange Server Name Instead of CAS Array Name.

I have one users Outlook settings that is showing the name of the Exchange CAS server instead of the CAS Array Name.   Other users seem to be fine.  I have tried recreating profile and doing an automatic and manual install.  Can
X500 or X400 addresses have anything to do with it?

Hi monolithickernal,
As brenle said, could you please tell us what version of Exchange you are using?
And you could use following command to check the database configuration parameters.
Get-MailboxDatabase | Select Name,RpcClientAccessServer
Best regards,
Eric

Similar Messages

  • TO FIND THAT ONE USER HAS HOW MANY TRANSACTION AUTORIZATION

    Guru's
    I hav to develop a report which states that one user has how many Transaction authorization.
    Could u suggest wht steps to be followed.
    Or if sum starndard report is available or not.
    Eg.
    Amam
    has MM01,MM02,XK01,XK02.
    I need to display as output
    amman    MM01 MM02 XK01 XK02
    & ALSO TELL DURING THIS YEAR HAS HE USED ALL TRANSACTION OR NOT.
    Thanks in advance.
    Vibhuti

    Hey vibhuti,
    Go to TCode - SU01.
    U'll find all the details.
    Reward pts if useful!

  • Users can't send/receive, but are connected to Exchange Server

    Greetings,
    For some reason (happened this morning), none of my users (who are a mixture of Outlook 2010 PC and Outlook 2011 Mac) can send/receive email as quickly as usual (if at all).  Exchange server is 2010.
    Both clients are connected to the Exchange server successfully.  Sending an email usually takes (if it even goes at all) 10-20 minutes.  If I send an email from my Gmail account, again it take about 20 minutes to finally get to Outlook.
    Exchange server is not running any virus software.  On my Outlook client for instance (2010 PC), it's stuck on Updating Inbox indefinitely.
    No changes have been made to the LAN (and no other servers are having connection issues) or WAN.  I have run performance troubleshooting on the Exchange server, and all seems fine.  I have checked event viewer on both the Exchange server as well
    as the DC and DNS server (they are one and the same).  I've rebooted the DC, DNS and Exchange servers.
    Arrrrggggg!!  
    Thanks in advance for any advice.

    Hi,
    According to your description, both your Exchange accounts and Gmail account have the mail delay issue.
    Thus, I'd like to confirm the following information to narrow down the cause:
    1. Do your external users also come across the issue? Because this may be related to Network issue.
    2. Does the issue happens randomly or regularly?
    And I also recommend you use Performance Monitor to check the issue as Ed said.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Outlook 2010 Exchange Server 2010 to Exchange Server 2013 Features

    Hi All
    We have recently upgraded from Exchange Server 2003 to Exchange Server 2010. We are using the Outlook 2010 (32 bit) email client. When mailboxes were moved on to the new server various features inside the system were activated. For email Internal Out of
    Office Messages, External Out of Office Messages, notifications in the email recipient bar when creating emails if the user was out of office.
    What new features would be available with Outlook 2010 (32 bit) and Exchange 2013. And are they dependent on the Office Service Pack?
    Kind Regards
    Please note that I have previously posted this in another forum but was advised to post here in this forum.

    Hi,
    I find your post on Office forum:
    http://social.technet.microsoft.com/Forums/en-US/fc538968-212c-411c-8ce8-0ef1d7acfcca/outlook-2010-exchange-server-2010-to-exchange-server-2013-features?forum=outlook
    The Steve's answer is comprehensive, great links on Exchange 2013 new features and removed features.
    About "And are they dependent on the Office Service Pack?", I will give the answer.
    Based on my knowledge, when new SP releases, it include enhancements in security and compliance, architecture and administration, and user experiences.
    For example, Exchange 2013 SP1, it connects to Outlook 2013 SP1 via MAPI over HTTP.
    If you want to know more about the Exchange new features, please see Exchange Team Blog.
    Find blog about SP1 for your reference:
    http://blogs.technet.com/b/exchange/archive/2014/02/25/exchange-server-2013-service-pack-1-available.aspx
    Thanks
    Mavis
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • One user has very slow network drives on terminal server.

    Hello,
    I am using a windows XP machine to connect to a 2003 terminal server. I have one user that was complaining about how long it took her to open files from a network share. I found that this is a problem with her account as it is slow no matter where she logs
    in from. E.G when I log in to the server from my computer as me, it is quite fast, if I do the same but log in as her it is painfully slow accessing the network drives.
    Does anyone has any ideas?Kind regards,
    Chris

    Hi Chris,
    Thank you for your comment.
    The issue seems it’s related to network problem, please check the network connection behavior. Network performance issues can also be caused by auto-tuning, because not all network devices support auto-tuning well. So try to disable the autotunning behavior
    with below mention command and check the result.
    netsh int tcp set global autotuninglevel=disabled
    In addition check KB 885189 for slowness mapped drive issue to Server 2003. Apart from this, check the below article to make the network connection fast.
    Windows 7 Network Slow
    Hope it helps!
    Thanks,
    Dharmesh

  • To find that one user has done how many Transaction during the year

    Guru,
    Could u suggest which table to check to find transaction done during the year by a user.
    I have to develop report with some changes now o/p is needed as one user in whole year how many TC done and list those.
    regards,
    Vibhuti

    Hi
    goto CDHDR and enter username and dates and
    it will list all the transcation for the year
    Regards
    Shiva

  • One User Has Previlage On Two Databases

    Hi Experts ... Hop I can find assisstant on my problem
    I want to create one user to have DBA previlage on 2 databases and I want to create one tablespace shared between 2 databases
    any body can help me please?

    MHAIDAR wrote:
    Hi Experts ... Hop I can find assisstant on my problem
    I want to create one user to have DBA previlage on 2 databases and I want to create one tablespace shared between 2 databases
    any body can help me please?Users and tablespaces cannot be shared among databases.

  • One user is unalbe to received email from specific sender exchange 2007

    <p>Hi,</p><p>i am facing issue in receiving email for single user with specific user account <a href="mailto:[email protected]">[email protected]</a> for one user when i check the message tracking the received connector
    is not default. it is&nbsp;using another received connector which we used for&nbsp;internal relay.</p><p></p><p>Any help is app&nbsp;</p>

    Make sure that connector has Anonymous is Checked, after that it should work fine.
    Is it with one user only or others also facing the issue? 
    Cheers,
    Gulab Prasad,
    Technology Consultant
    Blog:
    www.exchangeranger.com 
    Twitter:   
    LinkedIn:   
    Check out CodeTwo’s tools for Exchange admins   
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • I updated my iphone 4S with iOS 6.1.3 and now my e-mails say, "This message has not been downloaded from the server".  We have an Exchange server at work.  ??

    I updated my iphone 4S with iOS 6.1.3 and now I cannot retreive or send my e-mails.  We have an Exchange server at work.  I still receive the e-mails on all my devices just fine and I can see the subject headings & a small portion of the body of the e-mail, but when I open the e-mails there is no body and it reads, "This message has not been downloaded from the server".  Very aggrevating and is not helping my business at ALL!!  Same has happened with both iPads we own now. 

    Delete then add back the exchange acct on each device.

  • MQSeries Server Settings for connection to XI server

    Dear All,
    I am doing MQSeries 5.2 -> Sender JMS adapter-> XI -> Receiver RFC adapter -> R/3.
    Can anybody suggest me what are the things in MQSeries which should be running at MQSeries server(like queue,channel, queue manager - their types) to get a message by sender JMS adapter in XI?
    Should the queue manager be of local or remote type? If it local, then can XI connect to this queue manager in MQSeries.
    In the above things, i am asking only about MQSeries server things and not of XI server things - just to clarify.
    So if somebody has connected MQSeries server to XI server, then please give replies to my above queries. It is slightly urgent.
    Thanks and Regards,
    Rajeev Gupta

    Dear Chirag,
    i have already deployed the JMS adapter correctly in XI server.............
    i want to know is anything left on MQSeries server for me to do as a prerequisite to send message to XI server........
    So please reply to my above queries.
    Currently i am getting the following error in my sender JMS adapter:
    Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for '<IP_ADRESS>:<MQ_QUEUE_MANAGER>'
    at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:546)
    at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1137)
    at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:799)
    com.ibm.mq.MQException: Message catalog not found
    at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:171)
    at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:228)
    i have written '<IP_ADRESS>:<MQ_QUEUE_MANAGER>' just to hide the data - i am getting <IP_ADRESS> as IP Adress i gave in JMS adapter and <MQ_QUEUE_MANAGER> as Queue Manager i gave in JMS adapter.
    Dear All,
    Any inputs to my above queries.
    Thanks and Regards,
    Rajeev Gupta

  • Can user Reset the Password without Administrator help in MS Exchange server 2013

    Hi Team 
    IT is possible  for user to reset the password
    in MS Exchange server 2013 without Administrator help? (by getting mobile verification code how we get in Gmail ,& Outlook )   
    if it is possible ,kindly send me the configuration URL to my Mail ID [email protected] & [email protected]
    Thanks & Regards
    Dinesh.s
    +91 9566958700 

    You would have to assign Admin role permission to users in EAC.
    To understand this concept in more depth, I would refer you at this well described article : http://www.mustbegeek.com/reset-user-password-in-exchange-2013/
    Or, you may use any third party like, (http://www.selfservicepasswordreset.org/) that seems to be an appropriate approach in your environment. This tool allows end-users to perform self password reset
    and self account unlock from any computer in the network through a web-browser or directly from the login screen without any assistance from the administrator. Administrator can configure strong policy for automatic account unlock and automatic reset
    password at a specified time for any particular domain OU's.

  • Mail Delivery betweek Exchange Server 2013 co-existance with Exchange server 2010

    Hello Guys
    I have a mailflow issue, hoping someone can help with detail description, below is the setup
    Exchange server 2010 SP3 with all roles in one server
    Exchange server 2013 SP1 with CU6 with all roles in one server - this server is in a different subnet to the 2010 server. I am able to see exchange 2010 databases and mailboxes from Exchange 2013. For testing purposes, I have moved 3 mailbox from 2010
    to 2013. These 3 mailbox, is able to send and receive email from Internet but to each other via OWA or Outlook. These 3 mailbox also not able to send to receive email from any mailbox that is still in 2010 server via OWA or Outlook. I am not planning the whole
    server cutover in a go and planning to do state by stage mailbox migration so I need mailflow working properly. When I send an email from one of the migrated mailbox that is in 2013 server, I can see that the email leaves the mailbox outbox and sits in the
    queue ..
    Can someone please provide detailed solution what needs to be configured?
    MCITP, MCSA, MCSE,VCP - Consultant, Solution Design, Implementation

    Hi,
    1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
    2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
    3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
    4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
    I think I need to create a receive connector in the 2013 to receive from 2010 ?
    No need ,by design  exchange 2013 cas server default frontend receive connector will be having an
    entire ipv4 and ipv6 segment and anonymous connection is checked by default.
    I think I also need to create a send and receive connector for 2013 users to each other?
    No need , an intra organisation send connector and the default receive connectors in exchange will be used
    for internal mail flow between the exchange 2013 users.
    Please reply me if you have any queries .
    Regards
    S.Nithyanandham
    Thanks S.Nithyanandham

  • Outlook 2011 Exchange server name changes

    I set the server name in Outlook 2011 to the "public" FQDN.  Network DNS is set to resolve this name to the private IP address of the Exchange server.  This configuration works properly for all my users, whether they are connected locally or remotely.
    For one computer, though, when connected locally, Outlook changes to the "private" FQDN of the Exchange server.  This undesired change then requires editing the server name when the computer is remotely connected.
    How do I get Outlook to leave the server name as the "public" FQDN?

    Try going to [mactopia.com], which is Microsoft's Mac help area or you could go to [microsoft.com/mac]. These Discussion boards are for Apple products, so you should find help over there.

  • Recover mailbox from Exchange server 2010 information store to exchange server 2013

    I have a big issue. I have a correct exchange server 2010 where the active directory is corrupt but the information store is good.
    I would like to recover a couple of mailboxes to an exchange server 2013.
    Can anyone give me a detailed walk through of how I can accomplish this?
    Thank in advance

    Well if your AD is messed up that leaves you in a jam for sure because;
    1. Database portability ONLY works within the same organization, so you cannot just install a new 2010 server in a completely different forest and then move the DB in hopes that DB portability will work.
    2. As Ed said you should build a new Exchange 2010 server and use portability but it has to be in the same organization.
    3. Here is a good article on how to accomplish
    http://exchangeserverpro.com/exchange-2010-database-portability-disaster-recovery/
    4. Now if you by chance have an AD backup before it went south you could build a separate network with same names etc just keep it isolated from the production server and then restore AD to that environment and you could then use DB portability.
    That said if you don't have any other machines to work with then you are in a bit of a pickle and will have to use a 3rd party product to get to that data within the 2010 DB.   We make a product that can do this (DigiScope), however if you don't
    have any budget to handle its a non-issue.
    The only other thing you could consider is to restore your AD from a previous point in time, however BE VERY CAREFUL if you consider this since it could cause more issues then you have now.
    BTW if you AD is messed up, where are you putting this new 2013 server?
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
    2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • ACT! to Outlook to Exchange Server?

    I want to sync my company contacts, which are in ACT! to my exchange server synced Outlook on my Pre.  It appears very easy to set sync preferences in ACT! to Outlook.  I currrently sync Outlook contacts and email to my Pre with no issues through our exchange server.  Does anyone have experience or suggestions?  It seems too easy!!  I've scheduled my first sync from ACT! to Outlook for late tonight.  Thanks for you insights and ideas.
    Post relates to: Pre p100eww (Sprint)
    Post relates to: Pre p100eww (Sprint)

    Have you searched the Android Market place? There could be an application that you could download from the Android Application Market. Keep in mind since it's a 3rd party application it's not supported by Verizon Wireless.
    Hope this helps!

Maybe you are looking for