One view to anothere view

hi
i have two view . in one view i have registration no . and another view i want get data . but now i am not getting data .
what can i do

HI,
The registration number in one view did you mapped from controller context?
If yes then map the same field in context tab in the other view. Now Bind the
registration field in view 2 with the registration attribute from local context.
That should do it.
If you want to read the value go to code wizard and you can read it by just entering
the attribute name.
Regards and Best wishes.

Similar Messages

When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect?

When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect.

Yes you certainly can.
Right click any desktop in the list > Settings > in the left pane select the desktop you want to auto connect to > check "Auto connect to this desktop".

ICal: only one colour in year view

Hi, my issue is that my different calendars (Red- college, green-work, blue-holidays), all appear as yellow when viewing iCal as year view. When viewing the calendar as weekly and monthly I can see which calendar is which, but in year view I can't. This means that I see a huge block of yellow and can't differentiate days I'm in class from days I'm on placement, or days I have exams from days I am on holidays.
Please help!!

Fufidus, I have the same gripe and I know what you're talking about.
I have about four different calendars (Work, Family, national holidays and a shared calendar 'Leave schedule'). Each has its own colour, and I would expect that when I look at my various events (some stretched out over weeks and months) I should be able to see that colour representing the respective category in the year view. This would make sense and allow me to differentiate between the different categories over the year planner view and therefore have a good overview for the year. This is important for me as I need to plan my schedule between work and family at least 6 months in advance and likewise with my colleague.
What actually happens instead, is that all those different calendar categories all show as one colour, being yellow highlights, which doesn't help at all. It's confusing, especially if I'm trying to collaborate with my colleague or show the year view to my wife. We cannot distinguish any of the events on the year view unless you click on that day. The four categories just merge as one colour on the year view. Spots where two events overlap become red.
A picture is a thousand words so here is a snapshot. Tell me if this would make any sense to you....
If you switch back to month view, then the category colours appear as they should.
I hope the iCal developers could take note of this issue if they have not already done so and perhaps improve on this in the next update. I would be most grateful. I don't really fancy having a third party app as I'd like to keep things simple and keep to one OS X app that can sync between devices.

Ever since the latest update, my task bar (if it's called that - it's the one with "file,edit,view, etc") will "grey out" and I won't be able to type into any websites I visit. Only way to fix:either restart Firefox or reduce the window and open it again.

Ever since the latest update, my task bar (if it's called that - it's the one with "file,edit,view, etc") will "grey out" and I won't be able to type into any websites I visit. Only way I can proceed is if either restart Firefox (very annoying) or reduce the window and open it again. Please help!

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Corrupt_localstore.rdf

How to refer one view from another view?

Hi,
I have 2 views in my Adobe Flash Builder mobile app. I need to refer the first view in my second view.
How to refer one view from another view? Or how to create a reference to a view wherever needed?

I don't need any data from my first view. In a certain flow, I need to make my first view to be invisible.
for eg., My First view is in portrait mode. I change the device to Landscape. In the landscape mode, I want to show a completely different view (second view).
In this case, what happens is, I see my first view in Landscape mode for a second. Then the second view appears. When I change to Landscape mode, only the second view should be seen. I need to make my first view to be completely invisible in the OnOrientationChanging event of
StageOrientationEvent
As stage object and StageOrientationEvent works at application level, I need to know how to refer my first view object in the application level.
private function onOrientationChanging(soe:StageOrientationEvent):void
MyFirstView.Visible = False; ====> don't know how to refer MyFirstView here
Is my question clear now?

How to include one view into another view

Hi SDN's,
               Could any please tell me,How to include one view into another view.
In my requirment.I want to create a 'Z' view for an interface .In that view i have to take,
1) Ship-to-email adrr by
                          LIKP-KUNNR -> KNA1-ADRNR
                          KNA1-ADRNR -> ADR6-ADDRESNUMBER.
2) E-mail addr of person who created the document.i.e
    LIKP-ERNAM -> USR21-BNAME.
    USR21-ADDRESNUMBER -> ADR6-ADDRESNUMBER
    USR21-PERSNUMBER -> ADR6-PERSNUMBER.
   In both the case we have to pass ADDRESSNUMBER to ADR6 table.
If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
So i created two which fetches only the email addr of person who created the document.and another view fetches Ship-to-email addr.
Now i want to include the second view into first view . Is it possible?or please
tell me someother way to get these email addresses in a single view.

hi
as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
regards,
shamim

Way to rollback only one row of a view object

Is there a way to "rollback" only one row of a view object? That is, two or more rows have been modified but we wish to only restore one of the rows to the original (database) values.
Is there a way to retain all of the current rows in all of the view objects for an application module after issuing a jbo:Rollback?
Thanks

Is there a way to "rollback" only one row of a view object? That is, two or more rows have been modified but we wish to only restore one of the rows to the original (database) values.In jdev903, a new method is being added to Row interface to reset the row state to the transaction-original state i.e., rollback the row to it's original values.
Is there a way to retain all of the current rows in all of the view objects for an application module after issuing a jbo:Rollback?No. You may however override before/afterRollback methods on the ViewObjectImpl subclasses to cache the current row key in beforeRollback and restore currency on the default iterator to that rowkey in afterRollback
Thanks

Palm Desktop crashes when viewing one month in monthly view

Hi--this is a weird problem. Never seen it before.
--My Treo 680 (Win XP SP3), with Palm Desktop 6.2.2 seems to sync fine. I make changes in the Treo, it appears on the desktop.
--Also, I can view and edit the desktop in DAY view.
I normally default to monthly view though--and when I try to edit anything in a monthly view the Palm Desktop immediately crashes.This also seems to happen only with one month--July--where I recently added a lot of new appointments.
I ran the "check" tool for corrupted records, came up clean.
The data seems to be there and be safe and sync, but every time I try to access this one month from monthly view--it crashes.
Any advice, suggestions?
Post relates to: Treo 680 (Unlocked GSM)

Your link generated an error message..but I did find a couple of relevant threads. Thanks..
--I have no appointments spanning midnight, so I presume that's not the problem
--I'm reluctant to downgrade versions. I use the same software on my Vista laptop as on my XP desktop and I'd like to confuse the issue or go through degrading both.
The dbfix program was more interesting. It found for Calendar: one appointment in several places that it said "blob goes beyond end of record."
I don't know what that means, but it was particularly odd as this particular appointment was repeated in multiple years as long ago as 1969, it said--which goes beyond the ability of the desktop software even to access; certainly I wasn't using a Palm in 1969, and obviously it didn't exist. So I deleted all of them but for that 1969 one since the desktop will only go back to Jan 1970.
After deleting what I could delete on the desktop, I sync'd.
Didn't help.
I ran the program again and the exact same older--presumbably fictitious-appointments from old years like 2007 were still coming up as checked errors. Hmmm. Apparently deleting them on the desktop helped not at all. So now I deleted one on the 680 as a test.
I sync'd. Immediately crashed the Palm, but when it came came back up. I doublechecekd--that 2007 record was now gone from everything, desktop and PDA. I syncd again,,,went through fine this time.
Ran dbfix again to check--just coming with that one 1969 inexplicable error. Ran Palm Desktop now. Ran the Options/Tools/Check record on the desktop (included utility) just to be sure--no errors.
The final test--running Palm Desktop back in monthly view. Immediately crashed again.
Shrug!
Now, I don't mind buying the dbfix program if that'll do it, but does this seem like something it needs to go through and might actually fix, as opposed to my manually deleting the things?

HOW TO GET THE SELECTED VALUE IN A ROW FROM ONE VIEW TO ANOTHER VIEW?

hi all,
I have a small issue.
i have created two views.In the table of the first view i'm selecting a row and pressing the button it will move to next view.
i am adding some fields manually in the table of the second view and pressing the save button.Here all the values should get updated corresponding to the field which i have selected in the first view.
I want to know how to get the particular field in the selected row from one view to another view.
Kindly help me.

Hi,
Any data sharing accross views can be achiveved by defining CONTEXT data in COMPONENT CONTROLLER and mapping it to the CONTEXT of all the views. Follow the below steps.
1. Define a CONTEXT NODE in component controller
2. Define same CONTEXT NODE in all the views where this has to be accessed & changed.
3. Go to CONTEXT NODE of each view, right click on the node and choose DEFINE MAPPING.
This is how you map CONTEXT NODE and same can be accessed/changed from any VIEW or even from COMPONENT CONTROLLER. Any change happens at one VIEW will be automatically available in others.
Check the below link for more info regarding same.
[http://help.sap.com/saphelp_nw04s/helpdata/EN/48/444941db42f423e10000000a155106/content.htm]
Regards,
Manne.

How to pass field symbol or table from one view to another view in abap web dynpro?

I am creating an Inbound Outbound ALV report in ABAP Web Dynpro. However at selection-screen I have select options and fetching is done at view2. Problem is we can pass parameter using inbound outbound parameters but how to pass internal table or field-symbols from one view to another view? I made use of Assistance Class too but its not very clear to me. Please give me some example or code to sort this problem out.

I am creating an Inbound Outbound ALV report in ABAP Web Dynpro. However at selection-screen I have select options and fetching is done at view2. Problem is we can pass parameter using inbound outbound parameters but how to pass internal table or field-symbols from one view to another view? I made use of Assistance Class too but its not very clear to me. Please give me some example or code to sort this problem out.

How to call a method of one view in other view

Hi
could any one suggest "how to call a method of one view in other view "
thanks
kaushik

Hi Kausic,
Its not possible to call a method from view to View.
Since view is private entity we can not pass the data directly.
I suggest you to declare the method in Component/Custom controller and call.
the code is,
wdThis.wdGet<Component/Custom Name>Controller().<methodName>();
Regards,
<b>Ramganesan K</b>

When I open an event I can only see one photo. The view option for dispaying thumbnails is greyed.

When I open an event I can only see one photo. The view option for dispaying thumbnails is greyed. Iphoto '08 has worked perfectly for years. Suddenly it's balky~

Have you tried moving the thumbnail size slider at the botton on the screen?
LN

Passing Multiple table row from one view to another view

Hi,
How to Passing Multiple table row from one view to another view in Web Dynpro Abap. (Table UI Element)
thanx....

Hi Ganesh,
Kindly do search before posting.. this discussed many times..
First create your context in component controller, and do context mapping in two views so that you can get values from
one veiw to any views.
and for multiple selection, for table we have property selection mode.. set as multi and remember context node selection
selection cardinality shoud be 0-n.
so, select n no of rows and based on some action call sec view and display data.( i think you know navigation between veiw ).
Pelase check this...for multi selection
Re: How to copy data from one node to another or fromone table to another table
for navigation.. check
navigation between the views
Cheers,
Kris.

How modify data one view from another view in Cluster view

Hi,
I have a cluster view which includes two independent maintenance views. These views have not a direct relationship.
If I would append or change or delete records in the first view I want to add or change or delete some records in the second view.
1.
I have tried to use Extended Table Maintenance Events of the first view to modify the second but I cant access to the TOTAL and EXTRACT tables the second view from the fist view.
Is there any way to get access from one view to another using Extended Table Maintenance Events?
2.
I have tried to use the Event 04/VC: Before Saving the Data in the Database of the cluster view. I can access and modify the second view internal table using routines
READ TABLE vcl_struc_tab WITH KEY object = 'ZFIRST_VIEW' INTO structab_wa.
if not structab_wa-UPD_REQU is initial.
   perform VCL_SET_TABLE_ACCESS_FOR_OBJ using 'ZSECOND_VIEW' changing error_flag.
   it_tbl_second = <VCL_TOTAL>.
   loop at it_tbl_second into wa_second.
     wa_tbl_second-vim_action = 'U'.
     modify it_tbl_second from wa_second
   endloop.
endif.
But to save modified entries of the second view to database I have to twice press SAVE buttons.
The first time I have pressed SAVE above routines are executed and modified entries appear only in the second view internal table. The second time I have pressed SAVE modified entries appear in the database.
I would like user press SAVE button only once. How I can do it?
Regards,
Malnor
Edited by: Malnor on Nov 30, 2010 9:11 PM

If I would append or change or delete records in the first view I want to add or change or delete some records in the second view
Without a dependant field how will you perform this operation ?
You have to link the fields in the tables, generate maintenance view, add it to cluster view and do it.

How to set value from one view to other view's context node attr b4 save

HI all,
My requirement is as below:
There are two views in component BP_CONT.
BP_CONT/ContactDetails    IMPL class
BP_CONT/SalesEmployee   SALESEMPLOYEE    STRUCT.SALESEMPLOYEE
I want to set value from first view to second view's context node's attribute.
i get Sales Employee BP number in ContactDetails view, from here i want to set that value in to STRUCT.SALESEMPLOYEE
of second view in the same component.
please send me code snippet for doing the same.
Thanks in advance.
seema

Hi Seema
You can access the fields from different views by either using custom controllers or by using component controllers, in your case you can access the Sales employee BP number from the Component controller.
first access the component controller as below in BP_CONT/SalesEmployee (in do_prepare_output method) or in (specific setter method)
lv_compcontroller type ref to CL_BP_CONT_BSPWDCOMPONENT_IMPL,
lv_partner type ref to cl_crm_bol_entity,
lv_role type string,
lv_partner_no type string.
lv_employee TYPE REF TO if_bol_bo_property_access,
lv_compcontroller = me->COMP_CONTROLLER.
lv_partner ?= lv_compcontroller ->typed_context->-partner->collection_wrapper->get_current( ).
lv_role = lv_partner->get_property( iv_attr_name = 'BP_ROLE' )
IF LV_ROLE = 'SALESEMPLOYEE'
lv_partner_no ?= lv_current->get_property( iv_attr_name = 'BP_NUMBER' ).
endif.
now set the value
lv_employee ?= me->typed_context->salesemployee->collection_wrapper->get_current( )
CHECK lv_employee IS BOUND.
    lv_employee->set_property( iv_attr_name = 'SALESEMPLOYEE' iv_value = lv_partner_no )
Thanks & Regards
Raj

One view to anothere view

Similar Messages

Maybe you are looking for