One Way email-to-SMS

Hi again
In the Q12005 release , and if the setup for one way SMS i.e. email-to-sms is done and working fine, how can I make a setup so that when one userid reeives an email then I will send a notification to the users mobile number with a copy of the SMS? Assuming that the mobile number for the user is stored in the directory along with the ldap attributes? Should I develop a script to send a copy of the email to the user ? but how do the script knows that there is a new incoming email ?

You need an SMS Gateway to do this. Please take a look at the following examples:
http://www.visualgsm.com/online_demo2.htm
http://www.visualtron.com/products_addons.htm

Similar Messages

  • One way SMS + OTP in Azure MFA server

    Hi, how can i enable one way SMS in Azure MFA on premise?
    I have Azure MFA server and local active diretcory. I want users to receive a OTP and enter it to the logon page instead of replying to it? how can this be done? and if it is via the SDK, any one can explain more
    ammarhasayen

    MFA Server v6.2.2 and older doesn't have one-way SMS capability. It is being added to v6.3 which is expected to release in Jan 2015. The one-way SMS will work with the ADFS Adapter, RADIUS and the User Portal. In order to work successfully with RADIUS,
    the system sending the ACCESS request will need to be able to handle an ACCESS CHALLENGE response so that the user can be prompted for the OTP.

  • Email and sms notifications

    One feature I would like to see on the iPhone is the ability to control its behavior based on external factors.
    For example,
    - At night I want my phone to shut up. No email or sms notifications, and to only ring if call is from someone I care about.
    - When I have wifi I want it to check for emails frequently, but when I am using 3G I want to check manually (my SP charges for email traffic)
    As a result, I am forced to choose the least common denominator - always check email manually, and never notify on new email or sms.
    As far as I can tell, there is no way to do this automatically (sure, I can go into settings each time, but what a pita).

    http://www.apple.com/feedback/iphone.html

  • Different alerts for email and sms messages for a contact with custom ring tone

    Hello,
    I have a Curve 8530 with OS 5.0.0.395.
    I have my default sound profile set up to play one type of alert sound when I receive and email message and another when I receive an SMS message (so I know the difference without looking at my phone). That works fine except for contacts that I also have a custom ring tone set up for. It seems that under the Custom Ring Tones/Alerts section of the contact there is only one entry for Messages and it applies to both email and SMS. If I have the contact's message alerts set to the alert I have for email, then their SMS messages play the same alert and I might think it's an email. Or if I have the messages alerts set to the SMS alert sound then their emails sound like SMS messages. Is there a way to have a custom ring tone set up for a contact but still allow their emails and SMS messgaes to follow the current sound profile's settings?
    Thanks.

    Hello,
    Have you had any luck resolving this issue. I had a 8230 and this was possible. But like you I can get the 8530 to work. If you found the solution, please let me know.

  • Messages vs Personal Email vs SMS and MMS Text Folders

    Last week, I updated my software for my BlackBerry 8310 on the AT&T network.  I have been having problems with the receipt of emails since.  I seem to been receiving every email twice, once in my personal email folder on the main screen, as well as in the messages folder on the main screen.  I had posted asking for help and received help, which can be read here:
    http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=42082#M42082
    I had separted my emails and text messages into their respective folders, and placed the icons for my personal email and SMS/MMS texts on the main screen.  I then hid the messages folder.  At first, I thought this solved my problem, so I marked the thread as solved.  I then received another email and realized that it was delivered twice, once in my personal email folder and once in the messages folder.  I then had to un-hide the messages folder to delete the email, so that the new email notification would disappear.  I am still in need of help, so that I only receive each email once.  At this point, I don't care what folder it goes to, as long as I don't have to delete the same email multiple times.  Thank you for any help in advance.
    Matthew

    they look like 2 copies, they are not 2 copies, they are the exact same copy, just mirrored in another location, but if you delete one... doesnt matter which one, the other one deletes. what you are experienceing is not new. I have been running 4.5 for 2 months now and it works the same as 4.3
    I receive an email in my gmail icon and my messeges icon, if I delete it in 'gmail', it deletes in 'messages' automatically
    If I delete it in 'messeges' it deletes in 'gmail' automatically

  • Separate Email and SMS messages not found

    Hi Guyz,
    I'm just wondering, I can't find any options under messages separating email and SMS messages on my 8100.  Would this be a platform issue?  My current platform is v4.2.0.  Is there a way to download and upgrade a new platform?  Or can i just download a theme that has that option...
    Thanks in advance

    Go into messages,
    Press Menu button,
    Scroll to options,
    then general options,
    scroll down and you will see SMS and Email inboxes: Theme controlled etc, change it to seperate.
    If your issue is resolved, put a checkmark in the green box that contains the resolution.
    OR
    If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
    ~Gday from Down Under~

  • EMail and SMS problem

    hi 
    I just got a Blackberry Pearl. I configured it to receive my email. Now there is an email icon and all the email goes there. BUT it also started going into the folder that was the repository for SMS text messages. So someone told me to go into general options, select SMS and Email inboxes and choose Separate.  I did that but wiht the net result that the SMS folder now shows only my email and the Email folder also shows my email.
    The only way to get to my SMS inbox is to select the menu options, select View FOlder, then select SMS Inbox which is a little cumbersome.
    How do i fix that so my emails go to my email folder and the SMSes go to my SMS folder?
    ALso is there a way to prevent the Blackberry from notifying my every time i get a new email. I am fine with being notified when I get a new SMS?
    thanks
    Sandip 
    Solved!
    Go to Solution.

    To create seperate folders for email and sms, yes you open any of you message folders and hit the menu key, select options then general options, scroll down to sms and email inboxes, change that to seperate. then hit the back key and select save. You should now have a sms icon for text, an icon for each email and an icon for messages that will catch everything. If you do not have these icons try a battery pull. Remove the battery with the phone on and leave it out for 30 seconds. Replace it and allow the phone 1-3 minutes to reboot. Can you now find all the icons?
    ~Lorrie~ Master of All Things Blackberry!

  • Email and SMS Alerts - Solution Manager - PI and EP

    Hi All,
    I am trying to do the below scenario.....But somehow i am lost in the process.
    I have a three system PI landscape and a Solution Manager. I have included the DEV PI in solution manager for CCMS,the CCMS agents are online and it also reflects in RZ20.
    Now the requirement is SOLMAN should send email and sms alerts in below situations which occur in PI system.
    1.The ABAP or JAVA engine goes down.
    2.One of the filesystem crosses certain predefined limit.
    3.Any of the java server node stops working
    4.If any critical job gets cancelled in sm37
    I am looking at steps on how to define the alert categories, auto reaction methods, also the nodes where i have to assign these auto reaction methods.
    I have gone through CCMS documentations, played all sim files and gone through most of the pdf files but i am not able to establish proper steps to do it.
    I am Redhat Linux,Oracle 10g, SOLMAN 7 with PI7
    Can i extend the same for the EP systems also which are pure Java Stack Systems ?
    Also i would like to know if i can send customized alert messages.
    Best Regards
    Raghu

    Hi Juan,
    Thanks for your response.
    I am looking at the MTE classes i.e for the above situations which MTE classes are required.
    Also i have read in some document that we can send the alerts directly to the email IDs and cell numbers without having to mention them in user masters in SU01. Where to mention these ?
    I have my SCOT settings done for email servers.
    The process which i had built up in my mind is all mixed up and i am lost where to do which configuration
    Best Regards
    Raghu

  • Email and SMS and keyboard in landscape mode.

    I was wondering if, by any chance Apple is working to enhance the iPhone's email and SMS capabilities by incorporating the use of the accelerometer. This would allow email and sms messages to be viewed in widescreen format making it easier for my older eyes to see. This would also allow email and text messages to be created and sent using a widescreen keyboard making it much easier for my big fumble fingers to use. This would be the one GREATEST enhancement that could be made for the iPhone!

    No one hear can address 'what Apple is working on' - this is a user-to-user forum. There are aps in the App Store for landscape emailing; nothing for SMS.
    You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

  • Email and SMS from 2004 B Indian version

    Hello All,
    Can we use the EMail and SMS alert in 2004 B Indian Version.
    It is possible in 2005 A version(US). If you start SBO Mailer in the server tools the alerts will automatically send.
    Can any one help me to find it.
    Thanks & Regards,
    Jayakumar

    Hi,
    Mailer is available for all released localization.
    but SMS is only available in Isreal.
    regards
    yatsea

  • I want to copy email from my mac to my pc. Forwarding one at a time via email works well, but when I try to forward several of them at a time I receive one large email. I want to receive the emails individually on my pc. Any suggestions?

    I want to copy email from my mac to my pc. Forwarding one at a time via email works well, but when I try to forward several of them at a time I receive one large email. I want to receive the emails individually on my pc. Any suggestions?

    Don't know any 'automatic' way - but, i have "Fetch Headers only" set on each of my 'secondary accounts'.
    With varying internet service, manual "Get Messages" is probably the "Best Practice" because you will know how good your service is before you even try.
    maybe set "Check for new messages every 'n' minutes" to different times
    (3 minutes, 6 minutes, etc.) on each 'secondary' account.

  • Can I use Google Sync to transfer only my contacts from my IPhone 4 to my gmail acct? I don't want to sync info from Gmail to the IPhone. Can the sync work only one-way? I have 0 contacts on my gmail as I'll only use it as a back-up 4 my IPhone contacts.

    Can I use Google Sync to transfer only my contacts from my IPhone 4 to my gmail account? I do not want to sync info from Gmail to the IPhone. Can the sync work only one-way? I have 0 contacts & 0 calendar events on my gmail account. I opened the Gmail account specifically to for the Google Sync and wil only be using this account as a back-up for my IPhone contacts. Please Help!!

    You do realize that the SIM only contains account information for your wireless account.
    Moving the SIM from phone to phone does not cause any of your iTunes content, contacts, email, etc to magically appear on the device.

  • Can someone explain to me why iTunes will only sync photos ONE WAY from my PC to my iPhone, and not vice versa?

    I have photos on my iPhone and want to put them on my PC.  Should be straightforward, right?
    So I go ahead and install iTunes, and plug in my phone, and sure enough iTunes tells me I've got 1610 photoes on my iPhone.  It won't let me actually SEE them, of course.  Fine (no, not really fine).  So I create a blank folder on my PC and proceed to do a sync.  My options are to (a) Sync FROM "My Pictures" to the phone, or (b) choose another and sync FROM my PC TO the phone. 
    Where is the option to sync FROM my phone TO my PC????
    It boggles my mind that I have to go outside of iTunes and use Windows Explorer to copy the photos from the phone to the computer.  So I go to "My Computer" and within the iphone Internal Storage there is only a DCIM folder and two sub-folders.  There are only 800 photos there!  Where are the other ones?
    Evidently what I can see from Windows Explorer is ONLY the pictures I took with the phone itself, and NOT the pictures I saved from email attachments or instant messages!  Why? Where are they and how can I access them???
    SO far, the closest thing I have been able to find is to have to buy a third party App like "Simple Transfer" to do this.  Is this really the case?  Or am I missing something?

    Photo sync is only one way, computer to iPhone.
    To get pictures from the iPhone to the computer, copy them to the computer as you would with any other device.
    Pictures saved from emails or instant messages (if done on the device) are in the camera roll.
    Pictures previously synced to the device from a computer are not available to be copied off the device.  They should already be on a computer.

  • Traffic only allowed one-way for VPN connected computers

    Hello,
    I currently have an ASA 5505.  I have set it up as a remote access SSL VPN. My computers can connect to the VPN just fine.  They just can't access the internal LAN (192.168.250.0).  They can't ping the inside interface of the ASA, or any of the machines.  It seems like all traffic is blocked for them.  The strange thing is that when someone is connected to the VPN, I can ping that VPN-connect machine from the ASA and other machines inside the LAN.  It seems the traffic only allows one way.  I have messed with ACL's with no avail.  Any suggestions please?
    DHCP Pool: 192.168.250.20-50 --> For LAN
    VPN Pool: 192.168.250.100 and 192.168.250.101
    Outside interface grabs DHCP from modem
    Inside interface: 192.168.1.1
    Current Running Config:
    : Saved
    ASA Version 8.2(5)
    hostname HardmanASA
    enable password ###### encrypted
    passwd ####### encrypted
    names
    interface Ethernet0/0
    switchport access vlan 20
    interface Ethernet0/1
    switchport access vlan 10
    interface Ethernet0/2
    switchport access vlan 10
    interface Ethernet0/3
    shutdown
    interface Ethernet0/4
    shutdown
    interface Ethernet0/5
    shutdown    
    interface Ethernet0/6
    shutdown
    interface Ethernet0/7
    switchport access vlan 10
    interface Vlan1
    no nameif
    no security-level
    no ip address
    interface Vlan10
    nameif inside
    security-level 100
    ip address 192.168.250.1 255.255.255.0
    interface Vlan20
    nameif outside
    security-level 0
    ip address dhcp setroute
    ftp mode passive
    dns domain-lookup inside
    dns domain-lookup outside
    pager lines 24
    mtu inside 1500
    mtu outside 1500
    ip local pool VPN_Pool 192.168.250.100-192.168.250.101 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 10 interface
    nat (inside) 10 192.168.250.0 255.255.255.0
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa authentication ssh console LOCAL
    http server enable
    http 192.168.250.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    telnet timeout 5
    ssh 192.168.250.0 255.255.255.0 inside
    ssh timeout 5
    ssh version 2
    console timeout 0
    dhcpd dns 8.8.8.8
    dhcpd address 192.168.250.20-192.168.250.50 inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    enable outside
    svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
    svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
    svc image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3
    svc enable
    tunnel-group-list enable
    group-policy DfltGrpPolicy attributes
    dns-server value 8.8.8.8
    vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
    tunnel-group AnyConnect type remote-access
    tunnel-group AnyConnect general-attributes
    address-pool VPN_Pool
    tunnel-group AnyConnect webvpn-attributes
    group-alias AnyConnect enable
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect ip-options
      inspect netbios
      inspect rsh
      inspect rtsp
      inspect skinny 
      inspect esmtp
      inspect sqlnet
      inspect sunrpc
      inspect tftp
      inspect sip 
      inspect xdmcp
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    call-home
    profile CiscoTAC-1
      no active
      destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:30fadff4b400e42e73e17167828e046f
    : end

    Hello,
    I seem to be having the same kind of issue although I cannot ping from either end.
    Ive set up a l2tp/ipsec vpn which I am able to connect to and get ip from my ip pool (radius authentication is working).
    I tried running:
    access-list NAT_0 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
    nat (inside) 0 access-list NAT_0
    but i get an error msg saying that the syntax of the nat command is deprecated. Im running ASA version 8.4.
    Ive fiddled around abit to find the correct syntax but have been unsuccessfull so far.
    Any help would be much appreciated
    This is a part of my config:
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network AD1
    host 192.168.1.31
    description AD/RADIUS
    object network NETWORK_OBJ_192.168.1.0_24
    subnet 192.168.1.0 255.255.255.0
    object network vpn_hosts
    subnet 192.168.2.0 255.255.255.0
    access-list AD_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
    access-list split-acl standard permit 192.168.1.0 255.255.255.0
    access-list inside_nat0_outbound extended permit ip any 192.168.1.0 255.255.255.0
    access-list inside_0_outbound extended permit ip object NETWORK_OBJ_192.168.1.0_24 object vpn_hosts
    ip local pool POOL2 192.168.2.2-192.168.2.10 mask 255.255.255.0
    nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
    nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
    nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static vpn_hosts vpn_hosts
    object network obj_any
    nat (inside,outside) dynamic interface
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 ########## 1
    no vpn-addr-assign aaa
    no vpn-addr-assign dhcp

  • How can one send email-sized photo files as attachments in Mail, without the photos appearing within the email?s

    How can one send email-sized photo files as attachments in Apple Mail, without the photos appearing in the body of the email?  If it can be done, it's not at all obvious, at least not to me.  Thanks for any help you can provide.

    The "View as icon" option shrinks the photo to an icon in the sender's Apple Mail, but how it appears to the recipient varies dependingy on what e-mail client he/she uses.
    Using Apple Mail 5.0 (the Lion version) at both ends, the sender can use the "View as icon" option to shrink his view of the photo to an icon, but the recipient also using Apple Mail 5.0 still sees the full photo in line with the message text. The recipient can then use the "View as icon" option to shrink it to an icon, but I don't think that's not what jackofarabia is looking for.
    As far as I know there is no way in the current Apple Mail to do what jackofarabia wants. There should be, but there isn't.

Maybe you are looking for