One way ping happens however reverse does not work.

I have two hosts ssux0049 and nus642.
ssux0049 can ping nus642
nus642 can not ping ssux0049
Here are few details that you might be interested to look at.
1.> DNS can resolve the hosts
nus642 # nslookup ssux0049
Server: 144.132.81.10
Address: 144.132.81.10#53
Non-authoritative answer:
Name: ssux0049.example.com
Address: 10.106.192.220
ssux0049 $ nslookup nus642
Server: 144.136.201.10
Address: 144.136.201.10#53
Name: nus642.in.example.com
Address: 146.132.2.6
2.>
nus642 # ping -a ssux0049
no answer from ssux0049(10.106.192.220)
nus642 #
ssux0049 $ ping -a nus642
nus642 (146.132.2.6) is alive
ssux0049 $
3.>
nus642 # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ixgbe0: flags=1001000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,FIXEDMTU> mtu 9000 index 2
inet 10.86.211.5 netmask ffffffe0 broadcast 10.86.211.31
groupname VLAN_2010
ether 0:1b:21:57:1e:aa
ixgbe1: flags=1001000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,FIXEDMTU> mtu 1500 index 3
inet 146.132.2.6 netmask ffffff80 broadcast 146.132.2.127
groupname VLAN_2004
ether 0:1b:21:57:1e:b4
ssux0049 $ ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
nxge2: flags=1009040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,FIXEDMTU> mtu 1500 index 2
inet 172.84.166.44 netmask ffffff00 broadcast 172.84.166.255
groupname ssux0049-172841660
ether 0:21:28:84:b9:12
ssux0049 $
5.>
nus642 # traceroute ssux0049
traceroute: Warning: Multiple interfaces found; using 10.86.219.32 @ ixgbe2005000 --> Should it be using this gateway as per netstat output? If no, can I change
traceroute to ssux0049 (10.106.192.220), 30 hops max, 40 byte packets this to some other available gateway?
1 10.86.208.3 (10.86.208.3) 0.372 ms 0.262 ms 0.193 ms
2 * * *
3 * * *
4 *
I have checked gateways can be pinged. Let me know if you need more details to resolve this issue.
Thanks,
DR
Edited by: 949530 on Jul 27, 2012 4:59 PM
Edited by: 949530 on Jul 29, 2012 12:25 PM
Edited by: 949530 on Jul 29, 2012 3:10 PM

Hi.
It's look like Firewall settings betwen this hosts.
You can start traceroute nus642 from ssux0049 and write all intermediate routers.
After try ping all of hime from nus642. It can be help found point of problem.
But again, firewall can have different rultes for different protocols and networks.
Regards.

Similar Messages

Domicile and billing address are Thailand. I want to buy a book in Ibooks Switzerland. However this does not work. Because my Apple ID applies to Ibooks Thai only.

Domicile and billing address are Thailand. I want to buy a book in Ibooks Switzerland. However this does not work. Because my Apple ID applies to Ibooks Thai only.

The best fix for your problem is to try getting your books from some other store which also has a free ereader app, such as Kindle, Nook, Kobo, GoogleBooks, Sony.

Can not get Firefox to remember a new password. Deleted old one for Password Manager, however it does not ask to save new password. Can't find a solution, please help!

I changed my password for a website, and Password Manager kept putting in my old password. Deleted the password from Manger, however Firefox does not ask me for a new one at all. Checked the help desk, but the solutions are not working either. Restarted computer, nothing. What do I need to do from here?

Hey lydiac,
You could try going to ''Tools > Options > Privacy'' and removing the individual cookie for that site. You can also try going to ''Tools > Options > Security'' and verifying that the site isn't in your exceptions list.
Hopefully this helps!

Deleting cookies, either one at a time or all, does not work; they reappear when I go back to view them. This is a critical privacy problem!

Removing cookies does not work, either one at a time, or remove all. I tried from history and from the options screen. They appear to go away but when I go back in they are all back again. This is happening in the latest version that was automatically updated.'''bold text'''

Do you have an extension like TACO (Abine) or TrackerBlock that maintains a set of OPT-OUT cookies?
* Targeted Advertising Cookie Opt-Out (TACO): https://addons.mozilla.org/firefox/addon/targeted-advertising-cookie-op/
* TrackerBlock: https://addons.mozilla.org/firefox/addon/trackerblock/
* Beef Taco (Targeted Advertising Cookie Opt-Out): https://addons.mozilla.org/firefox/addon/beef-taco-targeted-advertising/
In that case you need to remove such an extension to get rid of those cookies.

Slow/Fast/Reverse DOES NOT WORK

I have read other posts on this issue. When I attempt to apply this effect, it does not work. This is a new project in iMovie HD 6. Clips will not take this effect. It shows up in the preview fine but will not apply. Below is what I sent Apple. Any and all help (solutions) appreciated. Is anyone else using this effect successfully in HD 6?
I select a clip (it is selected), click on the Editing tab, then click on the Video FX tab, and then select the fast/slow/reverse option. I am correctly using the slider to slow the clip down just one tick past the default position. The effect shows up in preview but will not apply. The red progress line (that indicates the effect is being rendered) shows up for about a tenth of a second and then stops. I am using the latest version of iMovie (6.0.3). I have a Dual 2 Ghz G5 Tower. I have 1.5 GB of ram. I am using OSX 10.4 8. All my software is up to date.
The camera I am using is a Sony VX2000. Never had a problem with iMovie 4 and 5. I have two internal drives. I have an external drive that is for backups only. All three are Mac OSX Extended (Journaled) format. The drive i am capturing to is the original drive that came with with my computer. It is 160 GB. 147 GB is free. I keep this drive clean and only for current projects.
I did have some plugins installed for iMovie from GeeThree. They are the updated versions for Intel and PowerPC running OSX 10.4.8. Again, all software is up to date. I did remove those plugins from the plugin folder. Also, I have ran Disk Utility and permissions are fine. I have not removed the preference files yet (plist) because I wasn't sure which ones to remove.
A third thing I did was to create a new project (after unstalling the plugins, restarting, using Disk Utility), reimport some footage and see if the slow/fast/reverse effect would work then. It did not work. I then saved all my current work and saved to tape. I NEED THIS EFFECT TO WORK! Please who can solve my problem? Dinner is on me!! LOL!
Mac OS X (10.4.8)

In addition to Karsten's great advice...
Read Karl Petersen's post in this discussion for the common reasons the video FX don't work:
http://discussions.apple.com/message.jspa?messageID=1852869#1852869
:)Sue

Is Time Capsule Apple's way of admitting AEBS Disks does not work?

The support/discussion area is full of posts from many of us who have struggled to find a working solution for our Airport Extreme Base Stations with an attached disk drive; our frustration and patience has been tested as this was a promised technology, advertised to work at sale of the AEBS. Moreover, Apple touted the wireless backup with Time Machine as Leopard got close to shipment, but pulled the technology at the last minute.
So my question to Apple is, are you now admitting that AEBS + Disk simply does not work, and if so what are you going to do for those of us to bought into a technology promise that has simply failed?
Any insight, suggestions, patches, or even communication would be a HUGE and welcome change given the misinformation we have endured to date.

Interesting points from several of you. I am sure if these are global issue I might not have encountered them due to my light usage of AEBS external disk to date. That stems of course from my heavy usage of my Linux server mentioned earlier. I am sure that I might encounter some of them if a moved all my data onto an "Air Disk."
It sounds however that the problems are more OS X / Air Disk Client issues than AEBS from this point of view. Without actively troubleshooting them it's hard telling. Just a couple thoughts - please ignore if already covered elsewhere:
1. For the "after a couple days - vanished" issue: Have you also tried another OS other than OS X? (Windows, Linux, Solaris, BSD, anything with a samba client) Are you connecting via Air Disk or SMB? I do not know the internals of Air Disk, but I have been using the samba services of the AEBS.
2. As for automount, this very much sounds like a problem with the Volume Manager in OS X. Have you sniffed the network to determine if the VM is sending out the request for mount?
3. Finder not showing unless displayed/accessed via Desktop sounds 100% OS X problem.
4. 10.4 vs. 10.5 issue again points to OS X.
5. Access permissions: This is a common issue with NAS storage. Most times it comes back to end user not understanding the capabilities or poor/incomplete documentation of the product again causing misunderstanding. I would guess given the "it just works" mantra that the documentation is somewhat lack luster causing end user confusion.
6. Time Machine Target: I agree and they should fix this. Especially with another near identical product being released. I expect an firmware update for the AEBS when TC is released.
I am not trying to be a PITA, just trying to lend my knowledge/experience to the community. I have been working with carrier class networking and storage for nearly a decade. That being said, I don't expect this device to keep pace with those environments or feature sets. This is old news for that space, but cutting edge for the SOHO and consumer space. There will be bumps in the road caused by both the vendor and end user.
I think the most important things to determine is if "Air Disk uses SMB/Bonj/etc or a proprietary application protocol. Then if the problem is with Air Disk or direct SMB access (or both.) Lastly it needs to be determined if this is a client (OS X / Air Disk) or server (AEBS) problem. These issues can not be solved until one device is pinpointed as the cause for each of these issues. Many of these in fact sound like client issues in OS X and it's supported applications. (Particularly TM sounds at fault since I can not use my SMB shares on my Linux server as a target.) I am willing to help troubleshoot, but only to an extent since we all paid Apple the money not me. =)

Chapter Skip Reverse does not work

I have a track that is concert footage with chapter markers set at each starting of a new song. The client wants to watch a song and be able to skip to the next chatper. The chapter skip forward works correctly, but the chapter skip reverse skips to the previous chapter not the nearest chapter. I have seen commercial DVD and music CD and even iTunes work this way. Why or what I am doing work?

what program is this? it does not sound like dvd studio. if this in FCP then this what i do, i export it to quicktime and then import it into imovie and add chapter marker. then export it back out.

Transfer account from old MBP to new one and now my account password does not work.

I trasferred my account from one MPB to a new one using targeted disk method. I left my desk while it finished and came back to a registration page. I registered and the system rebooted. Now I see my login details but the password form my old Mac fails. The hint it gives me also seems to be bogus becaues I've tried many variations of the hint and they also do not work.
I'm submitting this from my original MBP and had not problem using my old password logging in to it. Why didn't my password transfer properly and now how do I fix my new MBP?
I made sure duing the transfer process to select everything for transfer -- accounts, applications, etc. All check boxes were checked.

AKAspuds wrote:
I trasferred my account from one MPB to a new one using targeted disk method. I left my desk while it finished and came back to a registration page. I registered and the system rebooted. Now I see my login details but the password form my old Mac fails. The hint it gives me also seems to be bogus becaues I've tried many variations of the hint and they also do not work.
I'm submitting this from my original MBP and had not problem using my old password logging in to it. Why didn't my password transfer properly and now how do I fix my new MBP?
I made sure duing the transfer process to select everything for transfer -- accounts, applications, etc. All check boxes were checked.
So now you have 2 accounts, logout of this one and in to the other.

There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376

Custom shortcuts addee via Keyboard.prefPane does not work..

Hi,
I read several sites that all refer to a way to create a shortcut for a menu command without one, ref.: <http://www.apple.com/pro/tips/keyboard.html>
However, that does not work at all for me. Never has. So what I am doing wrong? In particular, I would like to add a shortcut to open the main window of Address Book, after closing the window leaving the app running.
Anyonw could do me a run through? Cause the above mentioned procedure does not work.
Johan
PS: Oh, and in iPhoto I am not able to create a new film roll for the selected photos, even though I am following the exact procedure mentioned in Help..
PB G4 12" Mac OS X (10.4.8) 768MB

Welcome to our community
The issue is typically a matter of focus. Particularly in Firefox. In IE, when the page loads and is presented, the Flash object (your Captivate movie) is given focus. So the keyboard shortcuts work. But that doesn't happen in Firefox. In Firefox, you must first click somewhere on the Flash object to give it focus. From there forward, shortcuts work because the Flash object is now listening for them.
In every class I facilitate I demonstrated this and advise that it's a good idea to have a button on the first slide. This serves two purposes.
It forces the user to click to proceed
It keeps the first slide paused until the user is ready
Yeah, before someone comes along and says: (in an annoyingly nasal tone) Mr. Man, you KNOW there is an option in Captivate to keep it paused at the start... I'm well aware that Captivate offers this option without adding a button, but I prefer it for the reasons above.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

The link to a user defined oracle stored procedure does not work

This is based on the HowTo Download a file
http://otn.oracle.com/products/database/htmldb/howtos/howto_file_upload.html
I have given a link to a procedure as follows, which will download the file (as given in the HowTo):
#OWNER#.download_my_file?p_file=#ID#.
However, this does not work. It tries to open a page rather than executing the procedure. It displays the page not found message

that page not found message is a generic one. you'd want to check your apache logs for more info on what really happened. my guess is that you missed step 5 of that how-to, "grant execute on download_my_file to public"
hope this helps,
raj

Recording desktop in Quicktime 10 does not work in SL

OS 10.6.8 and QT 10.0 (131)
I want to record one of my desktop processes with QuickTime (v10.0). However it does not work, I get the following message:
The operation couldn't be completed. (OS Status error -108.)
I do get a file that appears to be the recording but it does not want to open. And I do need to force quit QuickTime almost every time the error appears.
On my other Mac, also with 10.6.8, it works fine. So I am puzzled.
Anybody know what this could be? How to fix? Open to suggestions.
I was also looking for a version of QT10 to reinstall it but can not find one. ( I was hoping this might fix it).

Why not use QuickTime 7.6.6 which is located inside your utility folder?
I was also looking for a version of QT10 to reinstall it but can not find one.
You can custom install directly from your system disc that came with your computer. Follow the onscreen custom install instructions.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

Purchased adobe acrobat x serial number does not work after two computers i need it put on a third computer help

I purchase adobe acrobat x I put it on two computers in my office I need to put it on one more but the serial number does not work anymore is there a way to put it one the third computer?

Also, you can only use it on two computers if they belong to the same person, are used only by that one person, and are not used at the same time. To install on two computers for two people needs two licenses. Adobe sell volume licenses, but do not sell an "all the computers in the office" license.

ALTER TABLE command with owner does not work

I performed the following statement in a SQLplus script where the variables were filled some lines before:
alter table '&ownername||'.'||&tablename' move online tablespace '&tablespacename';
However this does not work. I am getting:
ERROR at line 1:
ORA-00903: invalid table name
The variables are replace correctly by SQLplus and everything owner, table, tablespace exist.
Can I (as SYSDBA) not alter the table of another user?
Peter

Solomon Yakobson wrote:
EdStevens wrote:
Ok, you removed the mis-placed quotes, but why the double "." ??
If you wish to append characters immediately after a substitution variable, use a <font color=red size=3>period</font> to separate the variable from the character.
SY.Ah, I had simply never done it that way nor seen it done that way.

One way ping happens however reverse does not work.

Similar Messages

Maybe you are looking for