One website is compressed vertically so I see the site but cannot rad it.
When I go to this website: http://www.500eboard.com/, the site appears and apparently connects. Problem is that the page is all sqeezed together vertically such that it cannot be read. I can make out buttons for selections and they work, but each page that comes up is in miniature. These teeny tiny pages are impossible to use. No other website has this problem. The eboard was chosen from my bookmarks; other bookmarks work correctly. Never had this problem. I cannot contact site because I cannot read contact info.
jk
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Websites+look+wrong
Similar Messages
-
USB port on wrt610n i can see the drive but cannot see the content
USB port on wrt610n i can see the drive but cannot see the content
I have followed the instructions I see the drive but when I try to acess the drive I get a empty new folder
help I am lostwhat should i dowinmaco wrote:
Yes i have it is working on my PC
One thing in setting up the usb I had to use a different password
my router has a password and the only way I could move forward was to use the default admin admin user name and password
I could not use my router user name and password.
The username and password for the share on your attached drive can be anything you want them to be. I assume you set up a share on the attached drive? That's where you need to add a password for the share, although for ease of use I never did assign a password to the shares.
You do know that the firmware for the Storage Link is buggy, right? File size limitations as well as file corruption issues? Connectivity issues also rise up, with the only workaround that I have found is a script that you have to run every time you boot up your computer. As far as I can see the Storage Link function is a poorly implemented idea. No firmware in sight to fix the issues, and no idea of when. -
I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.
Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card? -
I have windows 8.1 operating system and I purchased and downloaded the Acrobat Professional XI. I am able to see the download but cannot locate how to pin it to my taskbar.
Hello,
Please refer to following article:
http://windows.microsoft.com/en-us/windows7/pin-a-program-to-the-taskbar
Regards,
Anoop -
Hi There
for the last few days I can log into icloud via icloud.com on my pc but I can't action anything.
I can see the emails but cannot view them. I cannot compose a new email.. I don't know if this is icloud or my pc?
Its working fine when I access on my iphone.
many thanks
CherryJust realised its fine through internet explorer but its Mozilla.. so assuming an issue with my browser?
-
Spotify Connect & Yamaha Reciever problems - See the device but cannot connect.
I have a Yamaha RX-V577 reciever with Spotify Connect and update to the last firmware.
When I try to connect spotify using the Android APP, I see the device but cannot conect to it.
What are the steps you took to get to the error/issue?
1. I star a song
2. Click on the speaker sign with a circle, and click on the receptor (Yahama device).
3. The grey rounder speaker sign goes from grey to green and the sound waves moves (like tryng to connect).
4. After a while it goes back to grey.
IMPORTANT I dont know how sometimes it works, dunno how but after trying alot yesterday It worked. But cannot reproduce it.
I have the EXACT same issue BUT on a Sony STR 1050! It worked fine up until lately. Sometimes I get it to work, but mostly not. When it works, it's very unreliable and often not in synch.
It still works absolutely fine with my Computer/Spotify App. I can even tell my PC to use my AVR as sound output and the connect to my PC to listen via my AVR. But connecting directly to my AVR is a PITA. Since more users have the same problem across different AVRs, it seems to be a new Spotify problem and not an issue with my AVR.
When can we expect that this issue is fixed!? I'm using this feature constantly. -
I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!! I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY!Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.
-
I upgraded Thunderbird a few minutes ago, but now I see there are messages in my Inbox, but I can only see the folder, the emails are not accessible. Nor can I seem to send messages, read messages, get to my Address book. I have normal menu bar at the top, the left panel is the normal list of folders, but on the right where I should see emails, as I have clicked on the Inbox, I see
Thunderbird Mail - Inbox
EMAIL
Read messages
Write a new message
Accounts
View settings for this account
Create a new account
Email Chat Newsgroups Feeds
and so on, These are listed in groupings, which I can't effectively show, but I can't do any of these things.''realfire [[#answer-666634|said]]''
<blockquote>
''realfire [[#question-1037151|said]]''
<blockquote>
I upgraded Thunderbird a few minutes ago, but now I see there are messages in my Inbox, but I can only see the folder, the emails are not accessible. Nor can I seem to send messages, read messages, get to my Address book. I have normal menu bar at the top, the left panel is the normal list of folders, but on the right where I should see emails, as I have clicked on the Inbox, I see
Thunderbird Mail - Inbox
EMAIL
Read messages
Write a new message
Accounts
View settings for this account
Create a new account
Email Chat Newsgroups Feeds
and so on, These are listed in groupings, which I can't effectively show, but I can't do any of these things.
</blockquote>
I even uninstalled Mozilla and then reinstalled it, but apparently, that didn't work, as it found my account settings, instead of my having to reset them and I was right back where I was before.
</blockquote>
Actually it did not answer my question, I still need resolution. -
HT5653 the import photo button does not work! so I see the photos but cannot import them? Need help
after connecting i5 to MAC my photos will show but cannot push import button to initiate.. This is first time it does that. Need help to transfer and save my photos from my iphone
Can you do it with Image Capture (in your Applications Folder)
-
Valid users can see a site, but not the document libraries they have permissions for
Hello everybody,
at a customer's site, there is SharePoint Foundation 2013 SP1 running, bound to both http and https. Seeminlgy out of nothing, a strange behavior occurred: Visting
http://intranet/subsite showed the page headers (logo, global navigation etc.), but no content. The welcome text was missing as well as the links to the document libraries which should appear in the left navigation.
After explicitely adding http://intranet as an alternate name (https://intranet was active only, don't know why), we can again reach content via http. Still strange appears, that
http://intranet global navigation links get redirected to https (fine, but unexpected). If we change a deep link to a document library from https to http in the browser's address bar, we can reach the content fine.
However, one problem still exists: This site gets published via TMG 2010 via https, and that also worked just fine for many months. But now, I can try what I want in TMG, valid authenticated users see only the top navigation, but no content at all.
Can anyone give me a hint about what to check? Of course, I will provide any info you may need.
Best Regards, Stefan FalkHello Daniel,
Thank you for your response. As to your questions:
I just added http://intranet to the alternate access mappings of the intranet zone and did not extend a website.
Besides SharePoint Central Administration, there is no other SharePoint web site collection on this server, and no other non-SharePoint-IIS-Site. This is a VM for nothing else than hosting this single intranet site collection.
We do see the same issue under two sub-websites underneath
http://intranet, namely http://intranet/Datenaustausch and
http://intranet/Protokolle. In both sub-sites, there is some welcome text on the home page and there are several document libraries, each with permissions not interited, but explicitely granted to specific users.
The first (solved) issue was, that we could not see the document libraries when using http, but could see them using https. This was solved by adding the alternate access mapping for
http://intranet explicitely.
We can successfully browse the sites (using http and https now) from the internal network. The one issue left is that the same does not work through TMG, that is, coming from the external network, we can see and call up the sites in a browser, but not any
content in them. We do see the site title and logo, and the global navigation at the top of the page, but we do not see the welcome text, nor the document libraries. This did work last week, and we do not know nor could find, why it stopped working. The issue
persists regardless of whether we use bridging to https or to http between TMG and SharePoint.
We have already restarted the SharePoint box, with no success.
If I can provide any further information needed, I will be glad to do so.
Best Regards, Stefan Falk -
Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
OK..this forum help me locate my iPhoto so HOPEFULLY ya'll can help me w/ 1 another issue. When I open an event in iPhoto...I can see the pics but when I click on the event itself a HUGE exclamation mark pops up and not my pic. Its really weird that I can see the pic but cant open it. Hopefully we can correct this issue. Also, if anyone has the energy....pls tell me how I can export from my iphoto-I want to place all my pics on CDs or my external hard drive and when I try to export it says.."unable to export.." I dunno!
Help PLZZZZZ!
Lost again,
AmandaThe two problems are related.
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
And that's why you can't export as well.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I have a site that i am on all the time and have never had a problem at all using it, but the other day all the sudden i could log into the site but when i go to use the chat room feature in the site i get kicked back out to the sign in area. I have used on other comp to make sure not site and have been able use w Internet Explorer... So i am at a loss as to what has happened all the sudden. Please help me...very frustrated w this... Jared
Original problem I noticed was that regular websites I go to (such as msn) were only partially downloading. I could see the text on the site but no pictures or videos. All web surfing was extremely slow. When I would go to a site such as man I would see another address in the lower left corner for "ads1.msads.net" or "cdn.optimizely.com" that is was trying to connect to. I tried using all three of my browsers (firefox, safari, chrome) and got the same response on all browsers. After I spent some time researching the issue I decided I probably had a adware/malware problem so I decided to try adwaremedic.com. I could also not access that site along with thesafemac.com or apple.com. I was also getting the same response on my other devices (iPhone, iPad, and a mac air). I could not access any of these sites on any of my devices although I could get to almost any other site although it was very slow. At that point I decided to unplug the router. I also did a number of other things before then to try and manually get rid of any adware. Eventually I got msn back working, apple.com, and the speed was much faster. But, I still can not access adwaremedic and thesafemac.com. I could access these on my phone with 3G but not on my wifi. This is where the problem still stands. I am sure I still have some adware on my computer and need to find a way to remove it. I am no techie so the complicated manual fixes are difficult for me to do.
-
I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings
OK, but in my ipad, the apple id i have in itues is already the one iwant to have, but th one i used to sin in for i-coud is the other one. Any tip as to how to change the apple id for icloud and any idea how to know what apps i bought with the other apple id so as to delete them from my ipad to avoid being asked to enter another apple id every time they get updated? thanks!
-
I can't access the contents of my email. I can see the message, but the email itself won't open.
I can't access the contents of my email on my i-pad 2. I can see the message, but the email itself won't open.
There are 3 things you can try:
1. Fully close you mail app. From your home screen, press your home button twice to bring up your most recently used apps (task bar). With your finger, hold it on any of those apps until they all start to jiggle. You'll see a minus sign sign on the upper left side of each app. Touch the on the Mail icon. Touch your home button once more to stop the apps from jiggling and then again to return to your home screen.
2. If that doesn't work, reboot your iPad. Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (hold past the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart.
3. If that doesn't work, the last resort might be to delete this mailbox from Settings > Mail COntacts Calendars, then re-install the mailbox.
I hope one of these suggestions helps.......
Maybe you are looking for
-
How do i Install 10g on windows xp
I have my oracle 10g installation CDs and want to install on my system but i do not know how to go by it and start the server, login, perform admin role (creating new user, assign privelleges, create role, start pl/sql* successfully) Pls i am totally
-
Bug in method restoreView of ViewHandler in JSF 1.2
Hello, I changed from version 1.1 to 1.2 of JSF, and I use the standard implementation (SUN). And now, when I invoke the method restoreView of the ViewHandler, I retrieve a wrong UIViewRoot object. So I checked in the source code and noticed that the
-
Hello everyone, We have Oracle 10g running on Redhat r3, and a database on a partition. As this partition got full I foolly tried to make some space by moving the redolog files (we have 3 groups with 1 file each) to another partition. The system was
-
How do I get past my security I forgot my security question
Please let me know if u know how to
-
It seems that since I upgraded to Tiger 10.4.4, I haven't been able to stream audio through Safari (2.0.3) anymore. This problem spans both the Real audio player, and windows media player. The only time I can get an audio feed is through the iTunes r