One WLAN, multiple domains

We have designed our network so that each site (22 sites with a total of 90+ aps)has its own wifi vlan. That means each has a unique DHCP scope.
Do we have to create 22 different wlans (which we know we can only do 16/wlc)? Obviously we would want to create one wlan that can pass through 22 different domains. Any suggestions?

Hi,
The solution is to use the 'AP-Groups Vlan' feature (assuming you have an LWAPP infrastructure). The feature is also called 'site-specific vlans'. The purpose is to allow creation of a single WLAN and then bind it to multiple dynamic interfaces (i.e. vlans).
The following URL covers the feature and provides a sample configuration:
http://www.ciscosystems.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
Regards,
Ben

Similar Messages

One WLAN multiple configuration

Hi all
I have a question concerning the configuration of the WLAN on controller WLC5509.
I have a few branches with connecting to HQ by MPLS.
In each location is seen the same WLAN Global_Wlan.
I would like, so that each of the connected clients to Global_Wlan in localization, IP address got from the DHCP server at the location.
Is it possible?
Marcin

Hi Marcin,
There is another alternative design, if you want to terminate branch traffic at branch switch (including DHCP as well). You have to configure your AP as FlexConnect at braches & enable "FlexConnect Local Switching" feature on WLAN.
Here is a good Ciscolive presentation on this design & see whether that helps
BRKEWN-2016 - Branch Office Wireless LAN Design -2014 Melbourne (Link to recorded video session)
HTH
Rasika
**** Pls rate all useful responses ****

Preview in Browser, One Server, Multiple Domains

I work for a company that provides both web design and hosting services. All of our clients' sites are in sub directories of our /web/ directory on the server but their web addresses are set up as subdomains (clientname.mycompany.com). How can I make "Preview in Browser" work with this setup?
Right now, it tries to take me to the Web URL that I have set in "Servers" in DW, followed by the internal server path of the file.
What I need, is to have "Preview in Browser" open up something like;
clientname.mycompany.com:port
instead of;
dw_web_url/serverpath/file.php
Is that possible?
Also, is it possible to "Preview in Browser" while working on a CSS file? For example, if I am working on /root/css/style.css and I press F12, Firefox would open up clientname.mycompany.com:port/index.php instead of dw_web_url/root/css/style.css

Also, is it possible to "Preview in Browser" while working on a CSS file? For example, if I am working on /root/css/style.css and I press F12, Firefox would open up clientname.mycompany.com:port/index.php instead of dw_web_url/root/css/style.css
I'm puzzled by what you expect this would show? A CSS file has no display.
I have no sense for how to make your first issue work. Sorry.

Multiple Certs for multiple domains on one server

Is it possible with WLS6 and WLCS3.5 to serve up multiple domains with their own certificates?
i.e. https://www.foo.com and https://www.bar.com on the same box.

Hi,
for one WebLogic Server you can only specify one certificate. So to achieve
this you will have
to use different WLS instances for your domains - which is possible on the
same box.
Kind Regards
Maria Salzberger
Developer Relations Engineer
BEA Support
Mike Berger schrieb in Nachricht <3c21f5c3$[email protected]>...
Is it possible with WLS6 and WLCS3.5 to serve up multiple domains withtheir own certificates?
i.e. https://www.foo.com and https://www.bar.com on the same box.

Multiple domains hosted on one OSX Server

Hi guys,
Does anyone know if it is possible to host more than one domain name on OSX server?
A client of mine runs a number of businesses and is considering Snow Leopard Server, and wants to have multiple email domains and websites hosted on one server. Also per-account contacts sync and calendar sync would be useful, does anyone know if that's available?
Thanks!
W.

You can certainly host multiple domains on Mac OS X Server. There are a few options depending on how you want it to work.
If all the usernames are the same across all domains (e.g. [email protected] is the same person as [email protected]) then just change the mail server configuration to match all the domains in the mydestination parameter in /etc/postfix/main.cf.
If the domains are different (e.g. [email protected] is not the same account as [email protected]) then you have two options - one is to use the postfix model (which requires command-line management), the other is to add the email addresses in the shortname section for each user.
You may have some issues integrating contacts and calendars, though - if you take the postfix model then the users won't exist in Open Directory and won't have a calendar/contact link, etc.
If you follow the shortname model then you have one directory with all users in all domains and you'll need to work to separate them out if you need to.

Multiple Sites, Multiple Domains, one .mac account?

So, is this possible? Can you create multiple sites in iWeb, save them to a .mac account, and then purchase domain names for each of those sites and have one assigned to each? I'm assuming no, but I'm seeing if someone knows how or someone has some workaround to keep it on .mac, but have multiple domain names for my sites?
Thanks!!

So, is this possible?
No.
Can you create multiple sites in iWeb, save them to a .mac account, and then purchase domain names for each of those sites and have one assigned to each?
Yes and no. While .Mac does offer Domain name hosting in the form of a CNAME alias, only one Domain name is available per .Mac account. .Mac is not a registrar for multiple Domains. You can host multiple sites on your .Mac account, but if you desire a 'Domain name' for each site, you will need to purchase the Domains from a registrar like Yahoo, GoDaddy, 1&1, etc, and then forward these Domains to the appropriate sites, hosted on your .Mac account.
I'm assuming no, but I'm seeing if someone knows how or someone has some workaround to keep it on .mac, but have multiple domain names for my sites?
The "workaround" would be to utilize Domain forwarding from a Domain name registrar, using the .Mac urls for the forwarding address(es).
-Mark

Multiple Domain files, Multiple Sites, Publishing Problems

I am frustrated beyond belief. I'm an old hand-coder, coming from BBEdit, but I've been using iWeb almost exclusively since its release, because it really is a great product for quick, easy, stylish designs.
However.... In that year, my collection of sites has grown to 12. Discovering that iWeb becomes a major dog when dealing with that much material, I found and followed the instructions - today - to separate my sites into individual domain files, and edit them individually. iWeb is much snappier and publishing goes much more quickly.
The problem? Well... after editing, "Publish to .Mac" rarely works. Only "Publish All to .Mac" will get the site online (something about an error with the index.html file). But "Publish All to .Mac", I've just discovered, DELETES the other websites that I have previous published. All day I've been doing updates and publishing my sites, only to discover that the uploads have all been wiped out by the most recent one!
I'm a big enough fellow to admit that my knowledge isn't total nor perfect - so please, would someone out there with a better handle on iWeb than I (preferably someone who actually deals with multiple domain files rather than someone who thinks they can guess the problem) please clue me into how we make use of this program non-destructively?
I suppose I could always publish everything to folders and upload it to my iDisk (which itself remains ridiculously slow after how many years now? Sheesh!), but that detracts from the elegance of the .Mac integration, the counter features, - not to mention the little fact that I'm a paying .Mac customer and this darn thing should just work, no?

Mark:
I was where you were also. You should give iWebSites a try. It's to iWeb what iPhoto Library Manager is to iPhoto.
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want. Just remember to put a copy of your current Domain.sites file somewhere else on your HD in case the splitting gets messed up. It went very smoothly for me and I now manage 19 or so sites.
Do you Twango?

How do I host multiple domains on a single Messaging Server?

How do I host multiple domains on a single Messaging Server?
<p>
To host multiple domains on one Messaging Server, use the
mailAlternateAddress attribute. If you want to host two domains
(customer1.com and customer2.com) on your server mail1.domain.com,
make sure that:
The various domains (in DNS) point to the installed mail server
(you must have the MX records that
points mail for customer1.com to mail1.domain.com and
customer2.com to mail1.domain.com)
That each person receiving mail at customer1.com and
customer2.com has an appropriate mailAlternateAddress
attribute describing the appropriate email address. For
instance, John Doe can have an email address (i.e. the value
of the 'mail' attribute for the John Doe LDAP entry) of
[email protected] and receive his mail on
[email protected] (the value of the mailAlternateAddress
attribute)
With Messaging Server 3.5, mailAlternateAddress can take the
form of @mail1.domain.com. If jdoe's mailAlternateAddress is
set to @mail1.domain.com, mail sent to [email protected]
will be delivered to [email protected]

jaygatsby1123 wrote:
So what exactly am I doing with virtual hosts? There is a place for Aliases... What would I put in the "Aliases" box?
Any other host name that you want to resolve to the specified virtual host. It's quite literally an alias.
if you want www.example.com and www.example.org to end up at the same web site and you already have a virtual host — Apple refers to virtual hosts as sites — configured for www.example.com in Server.app, then you'd add www.example.org as an alias for the www.example.com virtual host (site).
Virtual hosts are implemented in a web server using some details of the HTTP or HTTPS protocol, and what the web browser (client) specified. The client gets handed an IP address or a domain name by the user, and the client then fetches the associated IP address for the target web server from the client's DNS services or local host database, and the client then connects to the IP address and passes over the text string that the user had requested — the IP address or domain name or even some local shortcut set up in the client system — via the HTTP or HTTPS protocol. The web server receives and processes this arriving text string from the client, and uses it to select which web site to render back to the web client. One subtle detail lurks here, too: the server's own DNS configuration really isn't involved in the selection of the virtual host.

How to create a muse site in various languages with multiple domains

I have been asked to create a website for a product. A very simple website with maybe one or two pages and one product for sale for which the client would like Paypal as the payment gateway. Simple right?
No! This client would like to market their product into Europe, they would like to purchase multiple European domains ( .fr, .de for example).
So how on earth can I do this? I will be using Muse for build and Business Catalyst for hosting.
Bearing in mind the client will not want to pay for separately hosted sites. Is there a way of translating the text for each domain. Or could I assign multiple domains but direct them to different home pages within the same site?
I haven’t a clue how to problem solve this.

Hi,
Some links that might be useful,
how to set up a multilingual website with Adobe Muse and push it live to Adobe Business Catalyst
Re: How can i create different languages for my page?
How can i create a multilingual website?
how to create a multilingual site
Do let me know if you have any question.

How to use the Load Balancer Plug-in to serve multiple domains

In SJSAS8.1 SE/EE the asadmin commands that create and maintain a load balancer configuration operate within a domain. When the load balancer configuration is exported an xml file is created that contains all the information for that domain. To make the load balancer plug-in balance the load for multiple domains, the loadbalancer.xml files can be manually merged to conatin the data that is exported from each domain's load balancer configuration.
For example, 2 domains are created, both having a load balancing configuration. After exporting both configurations using the asadmin export-http-lb-config command, the user would then cut and past the cluster information into the single loadbalancer.xml file that resides under the web server's config directory.
An example of the manually merged loadbalancer.xml file follows:
<?xml version="1.0" encoding="UTF-8"?>
<loadbalancer>
<cluster name="domain1">
<instance disable-timeout-in-minutes="30" enabled="true" listeners="http://localhost:1026 https://localhost:38181" name="i1"/>
<instance disable-timeout-in-minutes="30" enabled="true" listeners="http://localhost:1027 https://localhost:38182" name="i2"/>
<web-module context-root="ab" disable-timeout-in-minutes="30" enabled="true"/>
<health-checker interval-in-seconds="5" timeout-in-seconds="60" url="/"/>
</cluster>
<cluster name="domain2">
<instance disable-timeout-in-minutes="30" enabled="true" listeners="http://localhost:1029 https://localhost:38189" name="i3"/>
<instance disable-timeout-in-minutes="30" enabled="true" listeners="http://localhost:1030 https://localhost:38188" name="i4"/>
<web-module context-root="webservice" disable-timeout-in-minutes="30" enabled="true"/>
<health-checker interval-in-seconds="5" timeout-in-seconds="60" url="/"/>
</cluster>
<property name="response-timeout-in-seconds" value="60"/>
<property name="reload-poll-interval-in-seconds" value="5"/>
<property name="https-routing" value="false"/>
<property name="require-monitor-data" value="false"/>
<property name="route-cookie-enabled" value="true"/>
</loadbalancer>
Hope this helps - Mark

Mark, be my savior, I work for SUN as subcontractor at client site. the only one at site ...so I depend on this forum for solutions........
still having trouble failingover to second instance. I have two AccessManagers behind this loadbalancer.
Here is what I saw......
**************LOGS**********************
[20/Jun/2005:14:22:47] failure (15102): for host 128.114.65.13 trying to GET /amconsole/base/AMA
dminFrame, service-passthrough reports: timed out waiting for request body
[20/Jun/2005:14:22:47] warning (15102): reports: lb.runtime: ROUT1014: Non-idempotent request /
amconsole/base/AMAdminFrame cannot be retried.
So I went and updated the loadbalancer.xml (see at the end of the msg). Now I get a different kind of problem...
**************LOGS******************************
[20/Jun/2005:15:25:18] failure (15295): for host 128.114.65.13 trying to GET /amconsole/base/AMA
dminFrame, service-passthrough reports: timed out waiting for request body
[20/Jun/2005:15:25:18] info (15295): reports: lb.runtime: RNTM3003 : Error servicing the request : NoVal
Here is my loadbalancer.xml file...
<loadbalancer>
<cluster name="cluster1">
<instance name="instance1" enabled="true" disable-timeout-in-minutes="1" listeners="http://idm-test-1.ucsc.
edu:80 "/>
<instance name="instance2" enabled="true" disable-timeout-in-minutes="1" listeners="http://idm-test-2.ucsc.
edu:80 "/>
<web-module context-root="amconsole" disable-timeout-in-minutes="1" enabled="true" error-url="sun-http-lber
ror.html" >
<idempotent-url-pattern url-pattern="/*" no-of-retries="3" />
</web-module>
<web-module context-root="amserver" disable-timeout-in-minutes="1" enabled="true" error-url="sun-http-lberr
or.html" >
<idempotent-url-pattern url-pattern="/*" no-of-retries="3" />
</web-module>
<web-module context-root="ampassword" disable-timeout-in-minutes="1" enabled="true" error-url="sun-http-lb
error.html" />
<web-module context-root="amcommon" disable-timeout-in-minutes="1" enabled="true" error-url="sun-http-lberr
or.html" >
<idempotent-url-pattern url-pattern="/*" no-of-retries="3" />
</web-module>
<health-checker url="/" interval-in-seconds="15" timeout-in-seconds="2" />
</cluster>
<property name="reload-poll-interval-in-seconds" value="60"/>
<property name="response-timeout-in-seconds" value="30"/>
<property name="https-routing" value="false"/>
<property name="require-monitor-data" value="true"/>
<property name="active-healthcheck-enabled" value="true"/>
<property name="number-healthcheck-retries" value="3"/>
<property name="route-cookie-enabled" value="true" />
</loadbalancer>
**************************************************************

How to configure multiple domains in Active directory

HI,
How can I configure multiple domains on Active Directory. When I installed AD it asked for a domain name, there I gave ravigupta.com as domain name. But now I find no way of creating another domain.
I am a java developer and my task is to write a programme which returns all the domains available in LDAP server.
To start with ,I tried to create few domains in LDAP server ( AD ) but stuck up ,as i found there could exist only one domain.
Please tell me how to configure multiple domains in LDAP server ( Active Directory).
I skiped DNS configuration while AD installation.
-ravi

I'm sorry, but you should be asking on a different forum. This has nothing to do with Java.

Multiple domains and multiple IPs in the same MacMini Server

I am sure that this topic has been faced already but I cannot find enough information to really dig into a solution.
I have a macmini server with two IPs let say x.x.x.12 and x.x.x.13 .
The server is set up on the first IP. It has his primary zone, machine record, mail aslias and www alias.
Lets call the server domain server.domain1.com
Everything works fine I have a couple of local users and a couple of LDAP users. Just to test the machine setup.
I can send and receive emails using any of the users as [email protected]
Now I would like to have another domain, domain2.com in the same server .
The final goal is to have users under different domains. They have their own email box, calendar, etc.
It will be preferable that I can share the same username with different domains. But I can live without that option.
My first test was to have the second domain called server.domain2.com using the second IP. x.x.x.13 .
For that I created another Primary Zone with domain2.com as machine record of x.x.x.13 . To use the second IP I simply create another Ethernet interface on the macmini.
In the Mail -> Advance settings I added the host aliases as well as virtual hosting domains for domains2.com.
With this setting I can send emails as [email protected] or [email protected] but when I replay to their messages I get a "Relay access denied" error from server.domain1.com .
I also tryed another domain pointing to x.x.x.12, the same as server.domain1.com . I did not create any extra Primary Zone but the local host aliases and the virtual hosting domains.
Same issue. I can send but I get a "Relay access " error.
As you might notice I am a novice on servers settings. I just try to recreate a similar environment common to Virtual Hosting providers for my own website playground but I cannot cut through this email configuration obstacle.
Any significant meaning that can be leading me to learn how to do it will be very very appreciated . (beside lynda,com tutorials that I followed already but do not mention multiple domains for mails).
Thanks

the problem I try to solve is to manage multiple domains in one MacMini Server.
Having two IPs is secondary.
I would like that each domains has his own users with emails, iCals, Wiki and web sites.
The main problem is having emails to work for any additional domain beside the default one on the machine IP.
I also got an additional IP address to be used on the same server hoping that it make things easier but apparently is making things more difficult.

Multiple Domain Files

A lot of questions are asked in this forum about managing multiple domain files and splitting existing ones.
The "solutions" seem to be either to use an application such as iWebsites or to duplicate the domain file into folders and delete the appropriate sites.
When I first loaded iWeb '08, I kept a copy of a blank domain file and use this to start a new site by duplicating it into a new folder and double clicking it to launch iWeb.
My main reason for doing this was to overcome the inability of iWeb to create a new domain file from the "File" menu.
I have stayed with this, not only for speed and convenience, but because I read this...
http://11mystics.com/blog/2007/09/08/how-do-you-manage-multiple-domain-files-for -iweb/
and also this....
http://discussions.apple.com/thread.jspa?messageID=6261141&#6261141
These comments are from two people who dig deep under the hood of iWeb and whose opinions I respect and have taken to heart.
Is this the best way to create new domain files?
Am I being over cautious?
Am I totally deluded?
The last question is open to psycho therapists only !

UUIDs are like finger prints in Domain.sites2. There are ways to start new Domain.sites2 without duplicate an existing one:
1) move the last accessed Domain.sites(2) from its location, or rename the holding folder.
2) change com.apple.iWeb.plist setting, I post the procedure here:
http://discussions.apple.com/thread.jspa?messageID=6007612&#6007612
This can be done with AppleScript or Unix shell script. Doing so will get you new Domain with new UUID.
When you duplicate a blank domain, you also duplicate its UUIDs, as of now there seems to be OK as long as you keep domain separate. However, we do not know what Apple will do in the future releases, here is UUIDs usage progression in iWeb:
We did not see much of them in iWeb1, because iWeb1 Domain.sites is flat structure.
We see UUIDs everywhere in iWeb2 Domain.sites2, from top to bottom; every page has it own UUID.
So, I would be skeptic about having duplicate UUIDs; even in separate domain packages.
I ran a cross this when a friend asked me to merge his Domain.sites2 packages, and I thought people should be aware of it.
I ended up write Applescript applications to merge, extract sites and clean existing Domain.sites2 package by assign new UUIDs.

Can you host multiple domain names on mobile me with iWeb '09?

Hi
Can anyone help, before I upgrade to iLife '09, I have a personal web domain name which I host on my mobileme account. My girlfriend now wants a website and I have bought her a domain name and want to use iWeb to design it but I can't seem to host multiple domains on iWeb '08, can you with iLife '09? Or will she have to buy her own mobile me account? Any help will be great!!!
Thanks

MobileMe -MME -is Apple's hosting service.
Domain Name System - DNS translates an understandable address like www.mywebsite.com into the IP address which is a number like 40:75:92:301.
Cname is a name of record in a database that records what domain name goes to what IP address.
IP address is just a unique number that identifies any device connected to the internet.
An FTP client is an application the uploads your files to a server using File Transfer Protocol.
I mainly use Web Site Maestro because it doesn't just upload the files but optimizes them first to remove all the unnecessary code that iWeb creates to allow your website to download at least 30% faster.
I also use Yummy FTP for sorting out and keeping track of my files on the server and uploading folders of images and music files along with their assets for flash presentations.
I have used Host Excellence for years because of the way they allow you to name your own root folder on the server and also their great tech support.
FTP and servers can be a bit confusing but, if you have a good hosting company, you can get by on very little knowledge and understanding. I do!
I couldn't agree more with you about the acronyms and jargon. The more people use them usually means the less they know. One of the most misused words is "domain". I tried to sort that one out here...
http://www.iwebformusicians.com/SearchEngines/Upload.html
Now I'm going FUH and ATNP.

Multiple domains pointing to 1 site

Hi..
If I add multiple domain names to a BC site, just using the "New Domain", does the system handle it in such a way that its not regarded as duplicate content? There is 1 default domain, so how are the rest of the domains treated if added, ie does it use 301 redirects so as to avoid the possibility being penalized by Google?
If this is not the way to do it, can anyone explain how to deal with this, as there is nothing in the knowledge base on how to go about it.....

Hi Liam,
Couple of things...
"You have google indexing multiple domains. If those domains contain the same content - Duplicate Content."
That's clear - thanks.
"You say 301 redirects so I am gathering there are multiple domains to point to one set of content. "
Yes, the client has bought a few different domain names, all which they want pointing to the same website. (Bad practice huh?)
"Was it an attempt to improve SEO"
Yes, seems everyone is a self professed SEO expert these days!
Anyway, what is the best/simplest way to deal with this type of thing?

One WLAN, multiple domains

Similar Messages

Maybe you are looking for