One WLC AIR-CT2504-K9 for Main office and 3 Branches

Hi ,
I need to configure a WLC AIR-CT2504-K9 with the followings requiremets:
1.- There is a main officce where the WLC and 7 LAPs will be installed.
2.- There are 3 branches; one LAPs in every branch will be installed.
3.- SSIDs for internal users and guest will be the same in each office.
Is it possible to set this scenario ?? (see complete info in table)
In the past I configure some WLC 2100 but I noticed some difference with this new WLC-CT2504
one of the differences that kept my attention were regarding ap-manager interface (not shown)
and virtual interface ( shown as NOT SUPPORTED)
Should I set ap-manager interface or is enough with managment interface ?
why the message "Not support" in virtual interface ??
How can I use one port for two interfaces (as is proposed in table), if I try to do this a message error is displayed
"Error setting AP Manager interface".
iF I set one interface and associate to one port (Enable) I can not set second interface in the same port so remains disable
This model of WLC just has 4 Ports.
I have read last config guide but is not clear for me because there is no examples of this kind of scenario.

Hi Scott,
I configured virtual interface from startup configuration wizard.
(Cisco Controller) >show interface detailed virtual
Interface Name................................... virtual
MAC Address...................................... d0:c2:82:e3:8e:c1
IP Address....................................... 1.1.1.1
DHCP Option 82................................... Disabled
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Guest Interface.................................. No
regards,

Similar Messages

Head office and branch office accounts

HI sap gurus,
can any explain the configuration steps for head office and branch office accounts in vendor and customer master accounts and how to post an invoice in this configuration
Regards,
Umesh

I am assuming u are using SD integration for the billing . Therefore, please go to VD02 for the Child Customer profile under the correct sales org,distbn channel, div.
Then under the Partner functions tab set the SP Sold to party as the Child, BP Bill to Party as Parent,PY Payer as Parent and SH Ship to party as Child.
If its only for FI documents config then proceed in FD02 only, else if its integrated then use XD02.
Then under the Company code data in the Account management Tab set the Head office as the Parent . Then all the future postings will have Acct = Parent but Branch = Child.
If you want some examples which we have discussed before then go to
Re: Customer Master -- Parent + Child Relationship
Link between Branch Accounts and Head Office Account
To link branch accounts to a head office account, you must enter the number of the head office account in the Head office field in the branch account master record. This field is contained in the company code area of the master record.
The head office account can be any vendor account except one-time accounts or branch accounts themselves. Branch accounts and head office accounts must belong to the same company code.
Line Item Display
When you are entering the parameters for line item display, you should note the following: for head office accounts, enter the key 004 in the field Sort key. This instructs the system to display the line items for the head office account sorted by branch. This key is defined in the table for allocation rules.
For more information on line item display and the Sort key field, see Sorting Line Items
Correspondence
You can set up your system to cater for written correspondence with vendors a) for the head office, broken down per branch or b) for each branch individually. If you want to create correspondence (such as dunning notices and account statements) for the individual branches instead of the head office, you have to select the Local processing field in the vendor master record of the head office on the Create Customer: Correspondence screen.
You can also define payment methods in the master records of the branches and head offices. For example, if you want to have certain payment methods for particular branches, enter these in the master records of the branches concerned and do not enter any payment method in the head office master record. If you enter payment methods in both head office and branch master records, all payment methods are possible.

I have downloaded updates for microsoft office and now the internet wont work - any ideas?

I have downloaded updates for microsoft office and now the internet wont work - any ideas?

If you want to simply do a 'fresh' install (versus wiping out all of your data and doing a 'clean' install) simply boot to your Recovery partition (hold down the Command and R keys whilst booting) and when the Recovery screen appears, elect to freshly install OS X.
Don't know that will solve your problem, though... did you do the 'automatic' update or download the update as a disk image (.dmg)? I wouldn't think that would be causing your problems...
Clinton

Serial Number assignment for main items and sub items

Hi
All, good evening, i need clarificaction on the serial number assignment. My client's requirement is to maintain the serial numbers, so in this regard when i am confirming production order in this i need some information how the serial numbers are picked and consumed for main items and the sub items.
I need someone to help me in solving this.
Regards
Narsing

dear Narsing,
please look here:
http://help.sap.com/saphelp_47x200/helpdata/en/dd/f8c817b3f911d1896e0000e8284931/frameset.htm

Can one create a smart playlist for multiple podcasts and to...

Can one create a smart playlist for multiple podcasts and to play one after the other on your iPod? I want to combine podcasts of the same topic in a smart playlist. When I tried to do this I chose smart playlist, album starts with, and then did it again for each podcast I wanted. That didn't work. If it can be done how do you do it?
I have a fifth generation iPod which is always updated to the latest as well as the itunes.

Say for example I want to put different car related podcasts in one smart playlist. Car related podcasts such as Wall Street Journal Car Cast and NPR Car Talk. Can it be done and if so how?

Head Office and Branch

Hi all,
In AP - Using Head office and Branch Office scenario, payment is made to Head office and this payment clears the line item in Branch accounts (Branch vendor code / account number) also.
The question is my client wants the payment to be made to Individual Branch accounts and not to Vendor Head office .
In other words, when we go to transaction code F-53, branch accounts (vendor branch code / accounts) are not showing the open items to pay for. My client wants the transaction code F-53 to show the open items and wants to make payment to Branch and the clearing document should reflect in Branch Vendors code / account.
Please can anyone help
Thank you and KindestRgeards
Srikaanth

HI Murali Babu,
Thanks for continuous support
The following are the steps I have done.
Please have a look, Let's say
Vendor 1000219 is HO
Vendor 1000220 is Branch
went to transaction code XK02 - Vendor account 1000220 - Head office Field is filled with Vendor 1000219
Data Saved.
went to transaction code XK02 - Vendor account 1000219 - Local Process (under correspondence in company code tab) activated.
Created a Invoice against vendor 1000220 (through transaction code F-02).
went to transaction code F-53, picked vendor account 1000220 - to pay the Branch office
System says - no open items found.
I am with Ecc6 - EhP 5 (do not know whether I am missing anything else)
do I need to raise OSS message
or look for SAP notes
thanks to everyone for a very nice support
If I have missed out any configurations or any settings with Master records, please do let me know
Thank you and KIndest regards
Srikaanth
Edited by: E.S.Srikaanth Srikaanth on Jan 30, 2012 6:47 PM
Edited by: E.S.Srikaanth Srikaanth on Jan 30, 2012 6:49 PM

How to split head office and branch office?

how to split head office and branch office?
please explain it?

Hi What do you mean split - do you want to split the invoice value, say 1/2 for branch and 1/2 for head office?

Does Time Machine/Migration Assistant successfully transfer software licenses for Microsoft Office and Adobe?

I have a MacBook that I purchased in late 2007. It's been very good to me over the years. However, I'm been having various minor issues, and tonight I noticed that the screen goes to black at about 45° as I'm closing my laptop. In other situations I'd try to fix this myself, but right now I'm a Peace Corps Volunteer in rural South America and have limited access to the right tools, much less replacement parts. So instead I'm taking it as a sign that my trustworthy companion is about to give up the ghost and I should get a new computer now, instead of completely running this one into the ground and potentially losing important documents, photos, &c.
My question is simple: Does Time Machine and/or Migration Assistant successfully transfer licenses for Microsoft Office 2011 and for Adobe software?
My software installation disks are in a box in a basement in the United States. And since I'm not quite sure which box it is (last summer I did not see the need to label my own boxes), I'm not going to ask some unsuspecting friend or family member to dig through all my posessions to find an alphanumeric code or two, especially if I can just transfer/migrate the license without it.
Many thanks.

Try the combo update on the old machine.
10.6.8 Combo Updater
If the 2 computers have the correct cable connections, try the Target Disk Mode.
Target Disc Mode

One Format External Hard Drive for Your Mac and PC...

I have Formatted my External HD Passport 500GB = (465.8) and split it in two partition Mac OS Extended (Journal = 232GB) and FAT32 (Ms-Dos-FAT = 232GB) and reformat to NTFS using Windows...
How to use one External HUD for your Mac and PC you have a PC and how to have two Partition in Mac OS Extended (Journal) and FAT (Ms-Dos-FAT)as you desire the size of your partition under application, Utilities and Disk Utility and covert the (FAT32) to (NTFS)using Windows Control Panel or just search by Start, search Computer Management or just right my Computer and format the second partition to (NTFS)
Tips for Mac OS Extended (Journaled) FAT32 vs NTFS, what works and don't work...
(1)Mac OS Extended (Journaled) Partition can't be use in Windows to transfer files but NTFS Partition can be use in Mac by transferring file from Windows to Mac and NTFS support for files over 4G in size...
(2)FAT32 can be use in Mac and Windows but with a limitation that a file cannot be transferred to a FAT32 partition if the file is larger than 4GB such as a video file and FAT32 file system performs more slowly than NTFS...
(2)Mac OS Extended (Journaled) can be use in Windows when you Reformat your HD to HFS+ by third-party app such as http://www.macdrive.com/ MacDrive for $50.or http://www.paragon-software.com/home/ntfs-mac/ NTFS For Mac 6.0 for $30...
Reference link 1 External Hard Drive for Your Mac and PC...
http://www.myfirstmac.com/index.php/mac/articles/1-external-hard-drive-for-your- mac-and-pc
Best regards...
JamesUFOs...
http://www.youtube.com/user/JamesEBEs

I have many external drives I use between my MacBook Pro and my Windows PC's. I use a free NTFS driver for Mac OS-X to give me full read/write access to any NTFS formatted partitions when running Mac OS. I also use MediaFour's MacDrive v8 on some of my Windows PC's to access any HFS+ formatted partitions.
Most of my drives are formatted NTFS because I have more Windows machines than I have MacDrive licenses, and with the driver for Mac OS, they are fully accessible. I have a few drives I do keep formatted as HFS+ because I have encountered an app or two that don't work quite right when they don't get to write to files on an HFS+ partition (one of my backup programs is picky about this).
As said before, FAT32 is fully accessible between the two OS'es but it also has it's own limitations.

Memo Value for Main Asset and Sub Asset

Dear Experts,
I am having the requirement that, all the main asset should have the memo value Rs 1.
For this I have specified the memo value in OAYI. But system is taking the memo value for Main asset as well as Sub asset.
But we don't want to keep the memo value for sub asset.
I hope, I am missing some settings. Could anyone please help me to solve this.
Regards,
Aswin

Hi:
You need to review your copy settings for sub assets for your relevant class's screen layout in SPRO...Financial Accounting,,,,Asset Accounting....Master data....Define Screen Layout for Asset Master Data....Select the screen layout which has been assigned to your asset class in OAOA. You will not find any field for value copied. So it is not possible to avoid this happening becuase it is done a t CO code level.
Regards

Function module for sales office and group of an organization

Hi we are using enhanced organizational model in CRM 5.0.
Is there any function module to find the assigned sales office and group of an organizational unit?
Thanks a lot.

Nigne,
During transactional processing you can use the function module CRM_ORGMAN_READ_OW to read the selected organization unit on the business transaction, and it will contain data populated for these values.
My only guess outside of transactional processing is using FM:
CRM_ORGMAN_ATTRIB_READ or CRM_ORGMAN_SA_SE_ATTRIB_GET.
Good luck,
Stephen

WLC: AIR-CT2504-50-K9 Vs HP J9420A

Helloooo
I need to show the best in Cisco controller versus HP (HP MSM760 Mobility Controller) controller in point of Security and mobility and other
difference will make choosing Cisco WLC as a piece of cake.
So your help is needed, please

Salam Samer,
I have no idea about the HP product itself. But you can always check the datasheet of the product (2500 WLC) and compare the specs with the HP one.
Here is the datasheet of the 2500 WLC: http://goo.gl/dSLZbp
The price is not mentioned in the datasheet. That can be a basic element to decide the product sometimes.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you"

Can I use one 2tb external hard drive for time capsule and file storage?

I would like to use time capsule, but also keep the hard drive on my desktop for file storage. Can I do this?

Apple advises against doing that.
Any data stored on the disk that Time Machine is backing up to can not be backed up.
Plus the data outside of the Time Machine backup database cause problems when Time Machine starts cleaned up old backups to recover space for new backups.
For these reason it is advised that the Time Capsule disk be used for one or the other but not both.
Allan

Cisco WLC : AP automatic configuration for flexconnect parameters and ap group

Hello !
Is there a way to configure cisco WLC to automatically set flexconnect parameters such as Vlan support and Native Vlan ID when an access point join the controller ?
Same question to assign the access point to a specific AP Group ?
PS: The access points are set with usine parameters and the WLC is in version 7.4
Thank you for your answers !
Stephane

To my knowledge these features are not available in 7.4, but from what I understand 8.0 will have similar features. I can say that 7.6 has global commands, not sure if its part of 7.4.
If it is you can navigate there Wireless>Access Points>Global Configuration you can do things like configure your primary and backup controllers, set login credentials, pre-download images to AP's.
Please rate if you find the information helpful.
HTH

Hi, new to apple and not super tech savy. I wish to move to apple for all office and home use. want the works. What and how is the best way to go about this?

After some guidence on setting up apple at home and syncing all devices etc, any help would be great. IT not my strenght

It really won't matter which device you use to purchase and download the rental, though if your computer has a wired connection to the Internet, it may be a bit less susceptible to problems than the iPad's Wifi connection. For instructions either way, see:
http://support.apple.com/kb/HT1390
Once the movie has completely downloaded, a network connection will then not be required.
Regards.

One WLC AIR-CT2504-K9 for Main office and 3 Branches

Similar Messages

Maybe you are looking for