OneNote recordings "We're sorry, we can't open the file because it is in use by another program."

Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
Please help, this would make note taking so much easier.

A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek

Similar Messages

HT2041 I receive an error message when opening up a downloaded program as "Safari can't open the file because no availabel application can open it". Not sure what exactly this means or what I have to do!

I receive an error message when opening up a downloaded program "safari can't open the file because no available application can open it" I am not sure what I need to do to get these programs open!

What is the file?
Where did you get it from?
Allan

IBooks author: Can't open the file because "index.xml" is missing, please help!,

A project that I was working on yesterday and I didn't close it, today when I wanted to work on it and opened a new page there was a huge X on the page so I decided to quit ibooks then reopen it, saved all my changes first of course, but then when I tried opening it literally 10 seconds later it says the index.xml file is missing, this is my technology project due tomorrow please help!

This or a simmilar problems arose just after the last iBA update. There is a very long thread dealing with this.
I had a similar problems and nothing cured it until I contacted support and they gave me a link to upload to their server, they repaired my file and I downloaded it.
It actually took from start to finish about 2 weeks.
I "huge X" on any page usually indicates an image or similar content is missing.
The usual suggestions are to close everything down and do a re-boot.
I suggest a search of this forum for the thread may be an idea. Try this
https://discussions.apple.com/search.jspa?peopleEnabled=true&userID=&containerTy pe=&container=&spotlight=false&q=index.xml+file+is+missing
If you make a copy of your book file and change .iba to .zip, you can open the file and check if the index page really is missing.

I am trying to open a garageband file that my friend sent me, but she has a newer macbook pro than I do, so I can't open the file because it says I need to update garageband. I installed the updates but it still won't let me open it. How do I fix it?

The newest version of garageband can't be downloaded on my computer because my operating system isn't new enough, but I can't find a link to download a newer version of garageband than the one I currently have (garageband '09 version 5.1).

What is the GarageBand version that your friend is using?
If it is GarageBand '11, version 6.0.5, you can buy GarageBand '11 as a boxed retail version with the iLIfe '11 bundle, e.g. from Amazon.
Then you can upgrade GarageBand '11 to 6.0.5, using this upgrader from the Support page:
GarageBand 6.0.5
GarageBand 6.0.5 will work well with your system. But if your friend is using the newest GarageBand 10, this will not help. Then ask your friend to send you audio files for each track, so you can recreate the project from the audio. Or your friend could also use GarageBand '11 for the projects you want to share, that will run well in all newer MacOS X versions, even with GarageBand 10.0 installed on the same system.
-- Leonie

I can not open the file in Photoshop...

I can not open the file in Photoshop after formattatto pc.
I get the following error "could not complete your request because there is an error in the program
Please me!
Thank you

Version CS3
Adobe DNG Converter and Camera Raw 4.6 update
6.2MB
10/10/2008
Camera Raw 4.6 update
3.5MB
10/10/2008
Camera Raw 4.5 update
3.5MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.5 update
6.1MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.4.1 update
5.4MB
4/10/2008
Camera Raw 4.4.1 update
3.3MB
4/10/2008
Camera Raw 4.3.1 update
3.3MB
11/15/2007
Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
72.8MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.3.1 update
6.1MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.2 update
5.9MB
9/13/2007
Camera Raw 4.2 update
3.2MB
9/13/2007
Camera Raw 4.1 update
3.2MB
5/30/2007
Adobe DNG Converter and Camera Raw 4.1 update

I would like to be able to edit MP4s in CS5. I can not open the file. What am I missing?

I would like to be able to edit MP4s in CS5. I can not open the file. What am I missing?

According to the publisher For GoSystem Tax, the 32-bit version of Internet Explorer 8, 9, or 10 is required. Which means it can't be accessed from an iPad. This seems weird. I would recommend you contact the publisher.

"Safari can't open the page because it can't find the server"

I just bought my iPhone. The first time I attempted to log onto my home wireless network (US Robotics Wireless Router) the iPhone performed perfectly. However, the next time I attempted to logon and surf it gave me the "Safari can't open the page because it can't find the server" error message. I tried a variety of things which didn't work. I called the Apple Tech Support. Turning off the router and rebooting it was the only thing that worked. I thought my problem was resolved because after cycling the router the iPhone worked great once again. But . . . later the same day I attempted to connect to the router and the same thing happened and I got the error message. I attempted to power cycle the router just like before but this time it did not work! Help! Bad router? Wrong settings on router or iPhone?

Do you have other wireless devices connected to this same router? Do they work?
I really can't help you much but to say that when my router exhibited this issue it was accross the board (all notebooks would connect immediately following a router restart, but would loss connectivity until I rebooted the router again). In my case the only solution that was permanent was to replace the router.
You may also try restarting the phone and the router, setup security - WEP - (or disable security) on the router and phone, and/or try a different wi-fi channel (may actually help).

How do I delete a photo from my desktop which keeps showing the following info. every time I try to move it to the trash?: "DSC_0073.JPG" can't be opened right now because it's being used by another task, such as moving or copying an item or emptying the

I dragged a copy of a photo onto my desktop from iPhoto, and it seems to be in some state of process/activity (vs. just being a copy of a photo on my desktop). I tried to delete/move to trash the photo, and I keep getting the following message: “DSC_0073.JPG” can’t be opened right now because it’s being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.
How do I delete this photo from my desktop?
Thanks!

I ended up shutting down my system, and when I started it back up, I was able to drag the photo to the trash and delete it (I did get a message warning that my deleting the photo might negatively affect the application that was "using" it, but I deleted it anyway...it worked...and I'm hoping I didn't adversely affect another application!).
Thanks so much for your help!

Error message: File can't be opened right now because it's being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.

I recently transferred some data from my external hard drive to my desktop, but there was an error transferring some of the files and it couldn't respond, and eventually i simply removed the external hard drive. However, the folder/files are still on my desktop, and when i try to move them or delete them, this error message appears:
“-folder/file name-” can’t be opened right now because it’s being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.
Since I removed the external hard drive before the files were finished transferring, there is no way for the current task to be completed. How can I resolve this and delete the folders/files from my desktop?

I just managed to resolve this by going to the apple sign in the top left, choosing force quit (or you could do option+command+esc), then i chose finder, and i clicked relaunch. After relaunching finder, the error message doesn't appear anymore, and I could move these files/folders, and delete them just fine.
Hope this will help other people who encounter similar problems in the future!

When i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"

when i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

I can not open the file .7z to instal Photoshop CS6

I can not open the file .7z to instal Photoshop CS6

you should not manually extract that archive.
download the matching exe (the extractor) and place it in the same directory as your 7z (archive). click, or double click, the exe.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?

I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?

You need camera raw 8.4 for your camera, if it’s Digital Rebel T5 EOS 1200D EOS Kiss X70. It is not compatible with PSE11; so it’s a bit odd if that software was bundled with the camera except that it will work with jpegs. I suggest you download and install the free Adobe DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will editable in PSE11(keep your originals as backups and for use in the camera manufactures software)
Mac download (.dmg file) click here DNG Converter 8.4
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

An error occurred while opening the file, you can not open this file because it does not page???

Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE>
    <G_PLAN_CODE>
      <PLAN_CODE>03101C3003</PLAN_CODE>
      <PLAN_NAME>03101C3003_test</PLAN_NAME>
      <PLAN_EM>John</PLAN_EM>
      <PLAN_START_DATE>101.09.01</PLAN_START_DATE>
      <PLAN_END_DATE>102.08.31</PLAN_END_DATE>
      <PLAN_HOSTS>abc_super</PLAN_HOSTS>
      <LIST_G_PURPOSE>
        <G_PURPOSE>
          <PURPOSE_CODE>11600000</PURPOSE_CODE>
          <PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
          <LIST_G_PURPOSE_CODE>
            <G_PURPOSE_CODE>
              <BUDGET_AMOUNT>0</BUDGET_AMOUNT>
              <REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
              <TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
              <REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
              <TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
              <TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
              <TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
            </G_PURPOSE_CODE>
          </LIST_G_PURPOSE_CODE>
          <CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
          <CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
          <CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
          <CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
          <CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
          <CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
          <CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
        </G_PURPOSE>
      </LIST_G_PURPOSE>
      <LIST_G_PLAN_SUBSQL2>
        <G_PLAN_SUBSQL2>
          <GL_DATE>31-07-12</GL_DATE>
          <NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
          <AP_UNAPP></AP_UNAPP>
          <PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
          <PLAN_CODE1>03101C3003</PLAN_CODE1>
          <PLAN_EM1>Elly</PLAN_EM1>
          <PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
          <PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
          <PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
          <REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
          <DESCRIPTION>101 year</DESCRIPTION>
          <CF_GL_DATE>101.7.31</CF_GL_DATE>
        </G_PLAN_SUBSQL2>
      </LIST_G_PLAN_SUBSQL2>
      <CF_START_DATE1>99.1</CF_START_DATE1>
      <CF_END_DATE1>102.11</CF_END_DATE1>
      <CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
      <CF_OU_NAME1>IT Department</CF_OU_NAME1>
      <CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
      <CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
      <CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
      <CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
      <CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
      <CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
      <CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
      <CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
      <CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
      <CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
    </G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>

Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

Can not open the file

After the report files were moved to the directory under root in Linux, I can not open the file(.rdf) in my working directory in linux even though it doesn't work in the report builder in window.(it used to work fine)
error message the following;
rep-0110:unable to open file 'c:\documents and settings\myhome\desktop\invoice10.rdf
rep-1070:error while opening or saving a documents
can you tell me what it is the solution for that?
Message was edited by:
Jin

I think I have to recompile the files again.
I found the following solution but i do not know where do i write this script(Dos) and how to run it.
can you tell me more detail?
For Windows
Forms/Reports 6i
REM WINDOWS COMPILE FORMS
::compile_forms.bat
cls
Echo compiling Forms....
for %%f IN (*.fmb) do ifcmp60 userid=scott/tiger@v817 module=%%f batch=yes
module_type=form compile_all=yes window_state=minimize
ECHO FINISHED COMPILING
REM WINDOWS COMPILE REPORT
::compile_report.bat
cls
Echo compiling Report .....
for %%f IN (*.rdf) do RWCON60 userid=scott/tiger@v817 batch=yes source=%%f
stype=rdffile DTYPE=REPFILE OVERWRITE=yes logfile=log.txt
ECHO FINISHED COMPILINGMessage was edited by:
Jin
Message was edited by:
Jin
Message was edited by:
Jin

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

OneNote recordings "We're sorry, we can't open the file because it is in use by another program."

Similar Messages

Maybe you are looking for