Onenote syncing through a transparent proxy..or not!?
I'm having some people asking to use Onenote on Android - these devices sync through a transparent proxy as I can't enter a port number for the Onenote Sync - but because the application doesn't seem to support SNI (Server Name Indication) I get
an error message. The only way I can see to configure this on my firewall is to allow no HTTPS inspection on the IPs to which Onenote syncs. The problem with that is that there is a range...?
Is there a domain that I can put in, or a specific range of IPs I can enter!? I've tried all the usuals...live.com, live.net etc. I've also done a reverse lookup on one of the IPs I know it syncs to, but it doesn't resolve!
Any bright ideas?
Everytime you buy an Apple product, god kills a kitten.
I am not clear that the certain network ports that are required for Office OneNote, but we can still refer this article which lists the firewall ports when we connect to Office 365.
http://blogs.technet.com/b/educloud/archive/2011/11/30/what-firewall-ports-do-i-need-open-to-connect-to-office-365-for-education.aspx
Or, we may consider to use network monitor tool to find them.
Thanks.
Tony Chen
TechNet Community Support
Similar Messages
-
I have an iPhone 4S, iPad and MacBook Air. I'm looking for a program or app that I can sync though iCloud that will allow me to us all of these devices to track time spent on projects each day along with the ability to add specific information about each project. Any suggestions are appreciated! Thanks!
I recommend you consider Omnifocus. It is a task management program which runs on the Mac, Iphone & Ipad. I use it for task management and project management. It let's you store additional information as well. I sync all three devices through a Mobile Me account and I can enter data on any device and it is available on all devices. I believe you can also sync through Dropbox. I'm not sure that you can sync through iCloud yet. The link to their website is: www.omnigroup.com. There may be less expensive alternatives, but this one meets my needs and syncs very well across all devices.
-
Fileserve Blocked via Transparent Proxy.
I have been having problems downloading files off fileserve.com. When I try it gives a CATCHPA error.
After a bit of research it seems that fileserve.com has been blacklisted by the IWF and as a result, all requests for files are routed through a transparent proxy meaning all UK users have the same IP address (or a very small number of IP addresses) resulting in this CATCHPA error.
Is anyone else on BT having problems with fileserve? Would someone at BT confim that this is in fact the case?
ThanksFluffbutt wrote:
What the **bleep**?
I was pointing out that it's happening again, the first time was March, as from the post dates..
Now, 8 months later it's happening again.
Why is it pointless to comment and make people aware that BT are screwing us over again?
(oh.. that was a stupid question.. the answer is obvious.)
Hi.
I can connect to www.fileserve.com ok, is it something deeper than that ?
Can you give the exact details of the blocking you are seeing ? If it is the IWF, then I'm afraid that's the problem for fileserve.com to sort out.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures -
Site not working through Transparent Proxy
I have a site that will not load through transparent proxy at one of my buildings.
I have 2 buildings with same BM setup (3.9SP2 on NW6.5 SP7). At one location, I can not resolve a web site when running through transparent proxy.
At the other location, it works just fine.
Also, if I set the proxy to either BM server, the site loads without incident.
As another note, both locations use the same internal DNS server which is located in the building where transparent proxy works for this site.
What am I missing?
Any ideas as to what to try next is greatly appreciated.On 03/16/2010 03:26 PM, sjdimare wrote:
>
> Thanks for the reply. Both BM servers are using the same proxy.cfg file
> - Craig Johnson's - revision 30.
>
> I ran a lan trace on 2 separate PCs from the different networks.
>
> On the working network, you can see the DNS lookup in the wireshark
> log.
>
> In the network where it is not working, there is no DNS entry even
> showing that it is trying to resolve the domain name. Other sites are
> working just fine and you can see the DNS entry going to our internal
> DNS server.
>
> In the non-working segment, if I hard set the proxy, you see an HTTP
> entry going to the proxy server and resolving the domain in question.
>
> Very strange.
>
> Any new ideas are greatly appreciated.
>
> Steve D.
>
>
Then the pc failing has problem to resolve the entry. When you force the
browser, pc does not resolve anything, just send the url to bm and bm
resolve it. With TP, it is the PC who makes it. It could be that this pc
has already cached this site. But then you should see the reqesut goign
to the bm server. Without seeing the traces ( i do not understand your
there is no DNS entry even
showing that it is trying to resolve the domain name,) i can not comment
in more detail other that you've got a PC or network problem or dns
problem with this particular site, but not a bm.
if trace shows dns query from the pc and no answer, but is really
strange, do the same step but this time take a lan trace on the dns
server to confirm that request is received and what it does with it. -
I recently updated to the new version of MobileMe iCal. Now I cannot sync through a proxy server. If I take my computer off the proxy, iCal syncs fine. When I put it back on, it quits syncing.
All my other MobileMe data is syncing fine through the proxy, it's just iCal.
Is there a new setting somewhere that I need to know of to put proxy settings in for the new iCal? The error dialog box says that iCal couldn't connect after trying for 120 seconds and doesn't think it's connected to the internet.
Thoughts and help are greatly appreciated!
Message was edited by: Chris San Antone
Message was edited by: Chris San AntoneI'm also having the sam issue at work where a pop up window keeps showing up when I open iTunes and it asks for a Proxy Authentication username and password. iTunes opens, but not properly. It is missing images all over the page. Anyone know why this is happening?
-
Can not add Exceptions to Transparent proxy
Hello all,
I am sure this is simple but I can not figure out what has changed to cause this. Currently, I can not add items to the exception list in HTTP Transparent Proxy.
I only see refresh and close buttons on the screen - no Apply changes.
I have 2 BM servers and one I have access to without issues but the other does not work.
It definitely worked at some point in time because it has 25 entries but has since stopped.
What am I missing?
Thanks,
Steve D.sjdimare wrote:
> Here are the details:
>
> Both servers are identical in configuration (other than ip addresses):
>
> NW 6.5 SP7 and updated TCP
> BM 3.9 SP2 (tweaked per CJ website)
>
> Both servers exist in their on OU which is partitioned
>
> The server that is working currently only has 17 exceptions but I do
> not think it is a # of exceptions issue.
>
> While in iManager, if I select Proxy Services, on the main page the
> buttons on the bottom of one server shows "Apply Changes, Backup and
> Close" while the non-working server only has " Refresh and Close". This
> seems to indicate to me that their is a rights or roles issue in
> iManager that did not exist before but I can not figure out where.
>
> Thanks for your assistance.
>
> Steve D.
>
>
1. Tid 3506678. Apply Changes button is missing in the iManager server
configuration proxy screen
Be aware of the issue when you manager a bm server from non local
iManager instance. Tid 7001625:Apply changes button not submitting changes -
The songs on my iphone do not match up to the songs I tried to sync through iTunes
The songs on my iphone 4 do not match up to the songs I tried to sync through iTunes. I manually sync my iPhone with my iTunes and on the music page it says it will sync 283 songs when only one playlist of 12 songs is selected to sync. How do I remove the 283 songs that are on my iPhone and then add the 12 songs in the playlist that I want to add?
Download this for getting media off your ipod!http://www.macupdate.com/app/mac/19890/ipoddisk
Hope this helped! -
I have a macbook, an ipad, and an iphone with the Mail app on all three synced through icloud, but when I read and delete emails on my phone, the inbox on my ipad is not update, so I have to go through and mark as read or delete messages again. How can I sync my iphone and ipad? (it seems like each is synced only to my laptop, so don't synchronize until I go home and use my laptop.
POP: yahoo, aol, comcast/time warnder/road runner
Imap: google, hotmail, and more including icloud.
If you want to use multiple devices - move to imap, I would even say "exchange", but Google does not support free exchange anymore, since January of that year. So Ironically Icloud or Hotmail would be my choices right now.
To find out more about what happens to you, search on Google "difference between pop and imap" -
Can't add music my iPhone from iTunes.
When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
[Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
Also, just updated the phone's software today, and iTunes' software is already up to date.Hi Gregg,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
Cheers,
GB -
i've already synced my itunes on my laptop with my iphone but it's not synching all of the albums/songs. Everything was purchase through itunes so i'm not sure what the issue is.
What settings do you have in iTunes? Is it set to sync all music, it is set to sync only checked songs? Is there anything different about the songs that it is not syncing. Is it possible they were they purchased with a different Apple ID?
-
Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
When I sync my MacBook Pro with my iPhone and iPad, the events set in both devices (iPhone & iPad) are not transfered to the iCal on my labtop. Events created in both devices are transfered and copied betwen them when I sync them with the iTunes app (through the MacBook Pro) but they are not trasfered/copied into the labtop (iCal). The events created in the iCal (on my MacBook) are tranfered to the devices as two events on same hour. One, with the description created on the iCal, and the other as a New Event (no description). This is happening since I installed the new OS X Lion last week.
I file a report and talked with an Apple Support Representative, but they could not help me. They have not receive any other reports on this matter. Do someone has confronted this issue. I need to find out how to solve this problem.
Regards,
JADHi Sydness,
Thank you very much for your help. It just worked fine. I have 4 macs in my company for 25 years (one is updated each year), and it is the first time I could not solve a problem for weeks. It gave me the opportunity to join this great community.
Charles
Sydness wrote:
I reset my SyncServices and the calendar sync worked perfectly after that.
I followed the instructions found here:
http://support.apple.com/kb/TS1627?viewlocale=en_US
Mac OS 10.7.1 - MacBook -
I have just purchased an ipad 2 (already have an ipad1) and after syncing through itunes it will not connect to my home wifi. The first one connected immediately after setup. This one indicates my wifi accpimt bit states not connected. Help!
What make, model and version router do you have?
Is MAC address filtering turned ON in your router?
Do you have a limit on the number of connections set in your router?
What type of security are you using, i,e, WEP, WPA, WPA2?
Have you tried restarting your router? (remove power for 30 seconds and restart)
Does your iPad 2 work on any other networks? Starbucks, Borders, etc -
How can I Sync a folder (which contains all types files, sub folders and weighs some gigs) through wifi or USB ( and not using cloud services) between my New Ipad and Win 7 PC? Any apps available?
kindly suggest a solution.
Thank you inadvance!You can only import photos/videos via USB and the camera connection kit.
ITunes: Syncing media content to your iOS devices
http://support.apple.com/kb/ht1351
Cheers, Tom -
IPhoto '08 Book upload errors with squid transparent proxy - tip
Hi folks
I've just "solved" a problem I was having with iPhoto Book uploads. The solution may apply to other publishing products from iPhoto and possibly iDisk uploads too.
My firewall & proxy setup is basically Linux iptables redirecting all outbound http (port 80) connections to a dansguardian filter, which in turn is passed onto a squid instance running as a transparent proxy (oh, and there's a privoxy in this all too!). Yeah, OK, I know, slightly paranoid, but I don't want my children accidently browsing stuff I don't think they are old enough for yet!
Now I had the problem before with iPhoto '06 as well, but at the time just didn't have the time or inclination to figure out what the problem was, and just did the book order and upload from the office, where it went through without a problem. This time I decided to dig a bit and see what was happening. The clue that triggered off the solution was watching the part of the order process where the book data is uploaded. In my default setup, the upload bar would scream through to 100%, and then sit there for ages, before coming back with a connection error. Watching the network flashy lights on the NIC on the firewall though, it suddenly dawned on me that what was happening was that the upload was screaming through to the squid (as there was no outbound network activity from the firewall while this was happening) and then sitting there waiting for squid to pass it on to the Apple site (as shown by the outbound NIC activity light suddenly going bonkers once the uoload bar hit 100%).
So clearly there's a problem sending book orders via a squid proxy setup as a transparent proxy. It might also very well be dansguardian interfering and wanting to take the entire upload and checking it before passing it on to squid. I already have site exception setup for all apple.com urls though in dansguardian, so didn't think it would be that. I thought about dicking around with the squid acl's but didn't have the enthusiasm to spend half the day getting that working.
So what I did in the end was tail the squid logs to see what was being proxied whilst the book order was going on, and then dropped in 3 new rules in my iptables setup just before the redirect rule. Tried ordering the book again, and voila!
The three rules I inserted were:
$IPTABLES -t nat -A PREROUTING -s ! 10.1.1.1 -p tcp -d mercury.apple.com -j ACCEPT
$IPTABLES -t nat -A PREROUTING -s ! 10.1.1.1 -p tcp -d configuration.apple.com -j ACCEPT
$IPTABLES -t nat -A PREROUTING -s ! 10.1.1.1 -p tcp -d publish.mac.com -j ACCEPT
The "-s ! 10.1.1.1" bit is obviously particular to my setup, as I wouldn't want connections from the router itself being proxied, so that may need to either be customised or left out altogether. These three rules are then immediately followed by the redirect:
$IPTABLES -t nat -A PREROUTING -s ! 10.1.1.1 -p tcp --dport 80 -j REDIRECT --to-port 8081
Hope that is of some help to someone out there!
KTony,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
The Secure Store Service application Secure Store Service Proxy is not accessible
I am working on setting up a new SharePoint 2013 Farm for our external web site which is currently running on 2010 SharePoint. Because this is an External Website for our organization we have an internally available Publishing Site and there is an Web App
Extension to provide Anon Access to users using the www address. Currently I am doing everything on a single server for testing with HOSTS entries to loop back so I can test with real host headers and not impact the 2010 prod environment. We will be setting
up 2 more WFEs with a NLB before moving this into prod but it isn't there yet. We brought the Site Collection Databases over but are still running in 2010 mode for now.
I migrated a copy of the Secure Store Database over from 2010 and had it put on the 2013 Farm's Database Server. Set up Secure Store and the Secure Store Proxy. I went into the Secure Store Proxy in CA and refreshed the Key with the proper Pass Phrase. After
doing that I could see the Target Application IDs listed. Everything was looking good so I went off to test. If I am on the publishing site I can go to a page that has the solution on it and it operates as expected. It does a query to a non SharePoint database
and returns information filtered based on the search parameters. The only odd thing I see is if I click on the "Site Actions" I get a message "An error has occurred with the data fetch. Please refresh page and retry." Need to look into
that more but it only happens on pages that have these solutions. Maybe a clue. If I go to the Anonymous Access page (www......) and try and use the solution, it immediately (way too quick to appear like it is doing anything) comes back with "The security
token request cannot be completed."
If I dig through the usage logs I am finding the following.
The Secure Store Service application Secure Store Service Proxy is not accessible. The full exception text is: The security token request cannot be completed.
Unexpected exception from endpoint address : https://[Servername]:32844/4e87fd3aabb640fb8cc3ed52188cf5c0/SecureStoreService.svc/https
Logging unknown/unexpected client side exception: InvalidOperationException. This will cause this application server to be removed from the load balancer queue. Exception: System.InvalidOperationException: The security token request cannot be completed.
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForServiceContext(Uri contextUri) at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress
address, Uri via) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.GetChannel(Uri address) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName,
Boolean validateCanary, ExecuteDelegate`1 operation).
Initially I was fighting a firewall issue because it wasn't working (different errors) on both sides. Had Network Engineers open firewall ports needed and now it works on the publishing side. Still the same error on the Anon side. I suspect I have missed
something when it comes to configuring the Secure Store to allow access to anonymous connections.
Let me know if you need any more information but that should paint a pretty good picture as to how things are set up.
Thanks for any help on this one. Searches haven't found much that has helped so far.Hi Sennister,
I recommend to verify the things below:
Did this issue occur with all the pages in the anonymous side?
Check if the Claims to Windows Token Service is started.
Change the <identity impersonate="true" /> in the web.config to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support
Maybe you are looking for
-
I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Pl
-
Item Position Relevant for Proforma Invoice
Dear experts, In VOV7 I've put D in the filed for Billing relevance (relevant for pro-forma) But when I try to create the Proforma Invoice with VF01 (I'm sure that the Invoice type is a Proforma Invoice) the system give me the message "The document
-
I Cannot get ZoneAlarm to recognize iTunes 7 as a trusted program. It worked fine with previous versions. I have tried manually removing the previous version of iTunes from the trusted programs list and then adding it back, but to no avail. I cannot
-
Email address changed or invalid??
Whenever I attempt to purchase an app in the app store I am prompted that my email address has changed or is invalid. I have not changed my email address and I have verified it. I am however able to download free apps. Please help...
-
Oracle 817 client for windows download
I twice downloaded win817client.zip file from Oracle and when I try to uncompress the folder it says the folder is invalid or corrupted. Any idea?