OneStep DVD from movie

Hello. I just upgraded my MacBook Pro and I am now running OS 10.9.1 I am using iDVD 7.1.2. Whenever I try to make a OneStep DVD from movie and I select the movie from my desktop, iDVD crashes. It starts the encoding and a few seconds into it, a window pops up telling me that I inseerted a blank DVD and asks how I want to handle that. When I make any selection, iDVD closes. Please note that when I inserted the DVD earlier, it asked me how to handle the DVD and no matter what I choose, this window opens again for a second time after the encode starts. Any ideas? Thank you for any help.

How did you create the movie and what is its format? How much free space do you have on your hard drive?
Does iDVD crash if you try to create a standard project, i.e. open, select a theme and go from there?
OT

Similar Messages

OneStep DVD from movie file

The OneStep DVD from Movie file works fine for my 4:3 movies -- but I can't seem to figure out how to get my 16:9 movies to come out letterboxed when viewed on a standard screen. Is there some setting I can change to give me the results I need? I don't want or need anything more than a simple video that loops -- no theme, menu, etc -- so I haven't wanted to create a 'project'.
Any help is greatly appreciated!

I found the solution to my problem of burning a letterboxed SD 16:9 movie with iDVD on another forum and it worked like a charm! Details below:
Name: Christopher S. Johnson
Date: Nov 18, 2006 at 8:26:34 pm
Subject: Re: 16:9 and idvd 6
I'm not sure why but iDVD doesnt see the anamorphic flag on SD anamorphic QT movies. It WILL behave properly for HD QT files though.
This is the "Christopher S. Johnsnon" work around:
Open your anamorphic SD QT movie in QT player Pro.
Press Command-J
Highlight the Video settings in the list
Select Visual Settings in the tabs
UN-check Preserve Aspect Ratio
Change the width from 720 to 854
Hit Return and
Save the movie
Now bring it back into iDVD and you are good to go!!!
G5 Mac OS X (10.4.8)
G5 Mac OS X (10.4.8)

IDvd - Onestep dvd from movie, not working?

I am trying to make a onestep dvd from movie - from an avi file... but every time I make one (I followed all the directions perfectly). It looks like it is burning and takes about 4 hrs. but nothing happens. it just says I have inserted a blank dvd. Why does this keep happening?

Hi
from an avi file
.avi is not the food for iDVD - it usually can not handle it at all.
.avi - is no codec but a container - so one must use another program to figure out what codec that's in there.
Then convert it to sometrhing iDVD can use.
My UN-Structured/sorted notes up till Yet ! (May be MANY Faulth ! be careful)
AVCHD
• need of Intel Mac and iMovie’08 or 09 or 11
• can be converted to AIC via Voltaic
Containers.
.mov.
.avi.
You can use MPEG-Streamclip to convert some of the AVI files so that QuickTime can play them
and then to streamingDV for iMovie.
True file formats (?).
.asf (from QuickTimeKirk)
Your product is based on Windows OS and the .asf files are designed for Windows Media Player.
Microsoft discontinued Mac support for Windows Media Player in 2003.
iv50 - old codec on window platform.
• Open on a PC-Window with Microsoft Movie Maker.
• Put into TimeLine
• Save on ”this Computer” as .wmv
move over to Mac and open with QuickTime Pro and save as StreamingDV
(if Flip4Mac is payed then no Waterstamp and time limit)
or
Open in FinalCut Pro as is = No Waterstamp or time limit.
Flip4Mac -- //flip4mac.com
is third party software that "plays" most WMP formats via QuickTime Player. They also sell upgrades that allow conversion from WMP to QuickTime formats.
These upgrades are supported in iMovie version 6 but not for version 7 or 8 (iLife '08 and '09).
So. What to do?
Purchase one of the Flip4Mac upgrades.
Copy the files from the SD card to your Mac and convert to QuickTime formats (DV Stream would work best).
Import the new .dv file into iMovie (any version).
.dv
streaming DV    imports directly it is the same as from miniDV (tape) Camera
.wmv
iMovie is by concept meant to work with miniDV camcorders . . any other 'imports' need a conversion or are not supported... a quick solution would be purchasing a plug-in from www.flip4mac.com, 49$, which allows the conversion of .wmv (a PC format) into something useful for iM (dv-stream) ...
or, ask the emailer to send it in some other codec .. mpg4 for example .. which will be converted by iM 'out-of-the-box' ... and, to work with iM, the video should fulfill a few standards .. 720x480 pixel resolution, 30 frames per second ... otherwise, you will experience a dramatic loss of quality ..
.mp4
container not to be mistaken for .mpeg4 which is a codec - and it’s most often could contain a H.264 encoded material (PS3 and AppleTV)
.m4v
found in iMovie project folders - imported into iDVD without any problems
.mov
found in iMovie project folders - imported into iDVD without any problems
.ram     real-movie by Real-player download
Both Real Networks (.RM, .RA, and .RAM video files) and Microsoft (.ASF, .WMA, and .WMV video files) makes it VERY difficult to import footage encoded with these formats. Especially on a Mac.
.mpg
.mpeg
.vob
.vro
.m2v
.m2a
.m2s
.mts
.m2ts
.swf files are Flash files. You need Perian
.flv Awkward timing in your choice of software as QuickTime 7.4 has dropped support (we hope it is temporary) for Flash Video formats (.swf or .flv file extensions).
MPEG-1.          VideoCD
MPEG-2.             DVD
MPEG-4.         cell-phones to satellite TV - scalable
//danslagle.dvmix.com/mac/iMovie/qt_plugins/3002.shtml
Mpeg Streamclip. Supported formats.
• MPEG, VOB, PS, M2P, MOD, VRO, DAT, MOV, DV, AVI, MP4, TS, M2T, MMV, REC, VID, AUD, AVR, VDR, PVR, TP0, M2V, M1V, MPV, AIFF, M1A, MP2, MPA, AC3...
MPEG Streamclip converts from mpeg-1 to whatever you like (within reason).
MPEG-2 Playback File Types.
.mpg, .mpeg, .vob(2), .vro, .m2v, .m2a, .m2s
QuickTime MPEG-2 Playback Component
Recording types.
DV                        standard miniDV (tape)
DV Widescreen    16 X 9 on standard miniDV (tape)
HDV 1080i            Full HD quality
HDV 720p
MPEG-4
iSight
From Mac to PC - convert to .avi or .wmv
• Transport problem and 2?Gb limit on DOS/UNIX formatted hard disks - You need a
hard disk formatted on a PC in NTFS format
FAT 16 has a 2 or 4Gb file size limit
FAT 32 should be able to handle larger ones
• Rather copy back to miniDV tape (Camera) and use this
QuickTimeKirk. You don't format the drive using a Mac.
Use the PC to format using NTFS and avoid FAT 16 or FAT 32.
//en.wikipedia.org/wiki/Windows_Movie_Maker
Yep. They want DV-AVI as the format. Same thing but in an AVI container.
Export from iMovie to AVI (Expert Settings) and click the "Options" button to set DV as the codec.
Yours Bengt W

Using onestep dvd form movie (which I have done, successfully, many time before but now, the comuter ejects the disk 5 minutes before it is finished, and teh disk is blank, any thoughts anyone?mes before

with i dvd, using onestep dvd from movie (which I have done, successfully, many time before) but now the comuter ejects the disk 5 minutes before it is finished, and the disk is blank, any thoughts anyone?

with i dvd, using onestep dvd from movie (which I have done, successfully, many time before) but now the comuter ejects the disk 5 minutes before it is finished, and the disk is blank, any thoughts anyone?

Using "One Step DVD from Movie" on my IMac 10.8.6 using Verbatim DVD-R ("Life Series") 4.7 GB 16X 120, I get a wide angle version of my two minute story rather than the 3X4 standard aspect ratio that I normally get and want. Help!

While using "One Step DVD from Movie" using DVD-R Verbatim ("Life Series" 4.7 16 X 120 min) on my IMac 10.6.8 I get a wide angle aspect ratio on the DVD not the standard 3X4 aspect ratio. The Quicktime Movie is is standard 3X4 aspect ratio and the video video footage is standard 3X4 aspect ratio? Advice will be greatly appreciated.

Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - reboot.
4 - launch IDVD and try again.
Personally I would not the the one step method but create the iDVD project from scratch so you can make sure the widescreen option is not selected in the preferences and you can follow this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Is there a way to create DVDs from movies made in iMovie on the iPad?

Is there a way to create DVDs from movies made in iMovie on the iPad? I have a PC. Thanks

King_Penguin wrote:
There are third-party browser apps that have settings within them to identify themselves as full browsers e.g. Atomic Web, and I believe the iCab Mobile browser also does (I don't have it so i can't check)
iCab indeed does allow for that

Onestep DVD from Canopus ADCV-100

Greetings,
I'm trying to burn DVD's from a Sony CCD-TRV22 Handicam (analog) thru a Canopus ADCV-100 and into my powerbook using iDVD. iMovie recognizes the Sony but when I try the Onestep DVD in iDVD it doesn't. I've been able to import to iMovie then share through the media browser. Trying to reduce the number of steps. Any ideas?

It does not require QT Pro. Player version will suffice and it works from pretty much any QT movie.

How do I produce the highest quality DVD from MOV exported from iMovie

What is the best method in iDVD11 for burning to DVD, an imported HD 720p or HD 1080p MOV file exported from iMovie11?
I have successfully exported a 5.5GB (66min) HD 720p MOV file from iMovie. I then used iDVD to import this MOV file and burn it to DVD. When I played the DVD the quality was nowhere near that of the imported HD 720p MOV file as played on QuickTime. The DVD also shows captions at the edge of the 16:9 TV screen instead of further inside as per the QuickTime screening of the HD 720p MOV file.
How can I improve quality and maintain borders in iDVD for the DVD output?

Hi
How can I improve quality and maintain borders in iDVD for the DVD output?
Quality.
• Use iMovie up to HD6 or FinalCut - as iMovie'08 or 09 or 11 - just delivers every second line to iDVD = less resolution
• There are no HD-DVD in real life - DVD is as standard SD-Video
• If You must use iMovie'11 then do not use "Share to iDVD" BUT "Share to Media Browser" and as Large (Not HD or other resolution - as result will suffers)
Border
• May be turning on TV-Safe area in iDVD can help a bit. ?
• If this is IMPORTANT - Then You have to re-do Your movie in FinalCut and here turn on TV-Safe area and shrink the movie area to within this. Now it will show all on an old CRT-TV - but with a black frame due to that no two CRT-TVs show exactly the same area and then TV-Safe must be less than this.
My - Un-specific notes on DVD-Quality. If You are interested.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (vers 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2.Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no QT-conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be playbacked IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are playbacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround eg EnergySaver
• Don’t let HD spinn down or be turned off (in EnergySave)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Burning onestep DVD from iMovie, the result is a copy of the movie that loops continuously. Can this be remedied? I just want to burn it once.

My iDVD(7.1.2) one step recording loops indefinitely. It was done from an iMovie (9.0.4). Is there a way to stop the looping?

Why is there no iDVD on my new Mac?
https://discussions.apple.com/docs/DOC-3673

How burn DVD from .mov

I would like to burn a DVD direct from a Quick Time movie that I created in iMovie, without going through the iDVD process of creating a project, selecting a theme, etc. The movie is in .mov format. Is there a way to do this? I simply want to burn the .mov to a DVD so that it will play on a DVD player. Thank you.
NJZ

You can use iDVD to auto-play a movie, such that the Theme never appears. Open a new project in iDVD and click on the Map View icon. Drag the QuickTime movie onto the first box. Click on the box so that it is highlighted, then go to the menu and select Advanced>Loop Movie.
Once you've burnt the DVD, it will play automatically when inserted into a DVD Player, with no menu or Theme appearing. Also, when the movie finishes playing it will start again. Click Stop on the DVD remote to cancel playback.
See the following image:
John

Receive 'runtime error: Unknown exception' w/99% processed when creating DVD from movie

Hi,
I have tried several times to create a DVD of a movie with several Scene (w/Stop) Markers only to receive 'runtime error: Unknown exception' with 99% completion.
I'm using Adobe Premiere Element 11 ver 11.0 (20120901.B261.425551).
I'm running Windows 7 Ultimate w/SP1 on a Dell XPS M1530 w/4GB Memory
I have created DVDs in the past with little or no problems.
Would appreciate any help with my problem.
Thanks...

Harry
Thanks for the additional information.
Typically, if you are doing a multi movie Timeline and you want the viewer to be able to navigate to a specific movie followed by return to main menu, then:
Main Menu Marker at beginning of movie 1 and Stop Marker at end of movie 1....then gap of at least 12 frames...Main Menu Marker at beginning of movie 2 and Stop Marker at end of movie 2....and so on. But for the last, remember no Stop Marker at the end of that last Movie on the Timeline.
With those 25 .mts video clips, are you sure that you want or need all those return to main menu possibilities.... a scene marker at the beginning of each and a stop marker at the end of each for a return to menu after each of the 25 video clips? Especially if these are small video clips.
Large project...
Keep in mind that the DVD disc 4.7 GB/120 minutes is in reality 4.3 GB capacity. So as you can tell my the program's lowering of the Bitrate (8.00 to 7.97 Mbps), the program is trying to make the fit by lowering the bitrate. Depending on how your troubleshooting goes, you may want to start thinking about DVD Double Layer Disc (8.5 GB/240 min) if your project gets much larger. In the case of the DVD double layer, 8.5 GB is in reality 7.3 GB. Typically, lower the Bitrate, the lesser is the Quality of the end product. So you do not want to force the program to lower the Bitrate to low to make the fit.
As for the Timeline - + slider to which I referred...
In the above screenshot, please note in the right side of the Premiere Elements 11 Timeline (Expert view)...from left to right at that location,
the Render Button
the icon named "Fit to Visible Timeline
the icon named Zoom Out ( - ) which is related to the slider to its right
the icon named Zoom In ( +) which is related to the slider to its left
That slider is moved by either of those icons or by moving the circular button of the slider with the mouse curser.
We will be watching for further developments.
Thanks.
ATR

IDVD showed 5 hours to put together an mpg 2 DVD from .mov files & .jpgs

I am trying to put together a quick movie without all the trimmings onto a regular DVD to play on any DVD player & standard def TV. My camera shoots .mov & jpg files. I would like to be able to make DVDs quickly to give to family members who are eager to see the results. I usually save what ever I do as an ISO, then from this I can burn any amount of DVDs.
I tried using one step DVD & magic DVD,to do this, but the progress window showed it would be 5 hours to do. Why so long? The actual footage is about only 20 minutes long. I was advised to use these programs for this purpose. Can I just put the movies & photos without fancy menus etc? just for viewing?
Message was edited by: Sossity
Message was edited by: Sossity
Message was edited by: Sossity

Hi
A 3 Years old MB should take about same time as movie + menu to be calculated.
Rediculosly long times - most often depends on two things
• free space on boot (Mac OS) hard disk less than 5GB - my minimum is 25GB
• use of strange material as .avi, .wmv, .m4p etc
(due to that iDVD has to back convert this to what iDVD use natively)
I convert all
video to - streamingDV .dv (QuickTime .mov)
audio to - .aiff 16-bit 48kHz (NO .mp3 - convert this)
pictures - .jpg (everything converted to this)
My about 10 Years old G3 took about 36 hour per 1 hour movie to be calculated.
(before iDVD days - Formac Devideon)
Yours BengtW

Making a DVD from .MOV file w/o using iDVD

Hello
The film was made in FCE, saved in Quick Time (.mov) and want to burn it to a DVD to play on a DVD player. I don't want to use iDVD because I don't want the Apple logo in the corner (sorry).
Any suggestions?
Thanks!
A L

iDVD preferences

Create a playable dvd from movie file

can anyone suggest any good free software for turning video files (.avi .mpg etc) into a dvd playable on a dvd player?

No need to apologize, Its just that your question is on the tail end of another question and therefor many people won't see it.
Highlight your text in your question and copy it.
Then goto> http://discussions.apple.com/forum.jspa?forumID=1339
On the left hand side of the page near the top with be a Post new topic icon.
Click on this and title your topic something like Edit .mpg file ?
Then past your text into the body of the post area.
Good Luck

Burn Purchased Movies To DVD from Itunes

How do I create a DVD from movies that I purchase from Itunes? It allows me to burn a DVD that another computer can play but not a DVD Player.

Does that mean the only way to watch my purchased movie on TV would be to hook the computer to the TV??
You can use a computer or an AppleTV or an iPod/iPad/iPhone connected to the TV.

OneStep DVD from movie

Similar Messages

Maybe you are looking for