Onestep dvd help - only copying one section

I've successfully used onestep idvd to burn a disc from our camcorder. I put the 2nd dv tape in the camcorder, brought up onestep and first it gave me an error message (sorry, can't remember it) and then said it was aborting the process. Tried it again and it only copied the 1st section of my video, it stopped copying at the point where i turned the camera off and then back on again at a later time...the point where the blue screen comes up between footage. How do i tell onestep dvd to copy all the dv tape?
Thanks

it stopped copying at the point where i turned the camera off and then back on again at a later time...the point where the blue screen comes up between footage. How do i tell onestep dvd to copy all the dv tape?
OneStep is looking for breaks to stop copying, and your break is too big. No way I know of to get OneStep to "skip" the timecode break. I suggest you import into iMovie, and then use OneStep like this:
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/424.html
or just use iMovie>iDVD normally........

Similar Messages

Need OneStep DVD Help

I just used a firewire plug to connect my digital camcorder (set to VCR) to my MacBook, inserted a blank DVD, clicked on "OneStep DVD". Nada.
What gives?

Hi pceary,
welcome to macbook forum.
First, check if your macbook detect and able to communicate with your camcorder, by opening iMovie, and switch the button from scissor icon to camcorder icon, and if it is connected and you can import the movie, then those two are communicate each other.
Second try again within this sequence:
+To use OneStep DVD, connect your digital video camera to your computer using a FireWire cable. Then turn on your camera and make sure it's in VCR mode.+
+Click OK and insert a blank disc. OneStep DVD rewinds the tape, imports your video, and burns it to a DVD.+
Good Luck.

How do I get a burned DVD (the only copy) back into Final Cut to re-edit?

The project is long over, the files gone. What do I need to do to re-import this into Final Cut, or even i-Movie to do some other editing?

If you have original DV tapes and the FCE Project File, Capture Project will do it all automatically.
If not, you will have to convert the Mpeg files on the DVD to one that FCE can work with and bring the converted file to FCE as one clip.
Search this forum for how to, there's plenty of info here.
http://discussions.apple.com/thread.jspa?messageID=9067811&#9067811
Al

Hello, since I actualized my Mac with Maverick it doesn't recognize any external hard disk ,... only the one to make copy on the time machine. Can anybody help me? thank you!!!!

hello, since I actualized my Mac with Maverick it doesn't recognize any external hard disk ,... only the one to make copy on the time machine. Can anybody help me? thank you!!!!

Hello Laurabcn,
Thank you for using Apple Support Communities.
For more information, take a look at:
USB and FireWire Quick Assist
http://support.apple.com/kb/ht1151
Have a nice day,
Mario

I can export many iphoto events to a Data stick. I want to do the same with a DVD. When I do the DVD window is blank. If I drag and drop can only do one. Help

I can "export", using file, many iphoto events to a data disk. When I do the same to a DVD the DVD window is blank and nothing has been exported. When I use drag and drop to a DVD it works but I can only get one event on the disk. How do I export many iphoto events to a DVD. I am using a write only DVD. I am using a Mac Book Pro OS 10. Thanks in advance.
Gord

When I click on the data stick icon on my desk top a window comes up. It lists the various events that I have exported. If i click on an event each picture shows up in a list. I can click on the picture and view a jpeg photo or view a avi video. When I export I select "original" as the file type. When I export to a DVD and klick on the the DVD icon the window shows up but it is blank.

Printer will only print one copy no matter how many I put in.

Hi Im now using Windows 7 Word 2010 and since then I can only ever print one copy of my document no matter how many I ask for. Has this happened to anyone else. I have tried using a newer printer in the hopes it was a printer communication problem
but still only printing one document. Was fine using XP but not this. Any help would be greatly appreciated. In business its very frustrating to have to keep going into the print section and ask repeatedly to print for a letter to get the
copies I need.
Regards Kaz

Have the same problem with windows xp and Word 2007 and Excel.
I fixed the problem with disabling advanced printing feature on printing preference->Advanced->advanced printing features.
This was with a kyocera 3820 laserprinter. hopes it helps u

PE2 - Timeline thumbnail renders, but monitor and burned DVD video is blank for one section. Also audio export quality question

I split a clip to get rid of a few seconds of something else, and everything looked OK. I set it rendering overnight, and this morning, I found most of the DVD was fine, but this one section at the end is black on the DVD. I went back to the project, and although the timeline looks OK with thumbnails generated, it's showing black for that same section in the preview monitor. How can I "regenerate" this clip without re-adding and making the cuts?
The video details look OK though...
Video: MPEG2 Video 720x576 (4:3) 25.00fps 6802Kbps [Video]
Next up, seeing as I gave only one hours captured video to a whole DVD, I was wondering why the video was quite blocky.
Then I saw the audio....
Audio: Dolby AC3 48000Hz 6ch 192Kbps [AC-3] < what the?!? This is mono video captured off an old tape, so at most it could be 44k 96k mono, not 6ch! But despite FAQ-ing myself silly, I can't see where you change the audio properties...
Help on these two would be greatly appreciated.
Before anyone asks (and they will!) why I don't upgrade, well, V2 does what I want (which is about 2 DVDs per year!) and when I tried V4 trial, on my old 3GHz PC with 3.5Gb RAM it was TOOOO slow

I found the solution to the blank error - what had happened was that when I was trying to make the background, it said "drag media here to make thumbnail" (or something) so I did, but although it didn't work, what I didn't realise was when I dragged the preview image to the thumbnail, I had actually dragged the image right off the screen! But when I did "undo", it looked OK, so I didn't notice it hadn't undone the move. If that makes sense.
As that was the last thing I did, it didn't bother checking before burning. I found this because I started a new project to convert it, and thought "well, if it plays OK here..." and started experimenting. I only saw the video offset by accident!
As for the question about Audio, I was previewing in MPC Home Cinema, but you're right. because when I preview in Windows Media Player, it appears to be OK and says Dolby 2.0
Thanks for your help!

In my itunes library I have apps for the ipod. All of the apps were together, and now I have two different sections to my apps. The first one says 44 apps and the second section says 143 apps. When I connect my ipod only the first section goes on

can anyone help me with my apps on my itunes. They have separated for some reason. I have one section of 44 apps and the other has 121 apps. Only the top section will sinc with my ipod because at the side where it says apps, it is only showing the 44 apps and not the section at the bottom

Can you take a screen shot of the iTunes screen and post it? I do not really understand what you mean by different sections.
What model iPod and iOS do you have? Maybe the section that does not sync are not compatible with the iPod.
Were all the apps purchased with one account?
Do you have any Restrictions one that would prevent syncing? Settings>General>Restrictions.

My computer (pc) crashed so I bought a new one and authorized it. Downloaded itunes, synced my ipad and it only copied some songs and no apps. How do I duplicatethe data on my ipad to my new computer. Plus I purchased mobileme and my calendar is not sy

my pc computer crashed so I bought a new one and autorized it. Downloaded itunes, synced my ipad and it only copied some of my sngs and no apps. How can I download my ipad to my new computer

You can re-download your apps and ibooks purchases via your purchase history in iTunes on your computer (assuming that it's version 10.3+), and if you are in the USA then you can also re-download music I think - more info here http://support.apple.com/kb/HT2519
For music that you ripped from CDs or bought from a source other than iTunes then, assuming that you made/maintained one, you can copy them from your backup - and backups are relatively easy to maintain, so there is no reason not to have one (especially as content is occasionally removed from iTunes so isn't always available for re-download). Otherwise there may be third-party programs that can copy them off the iPad, but you can't do it via iTunes - this post from a year ago was about iPod/iPhone to computer utilities but some might work with the iPad : https://discussions.apple.com/message/11646661?messageID=11646661&#11646661 .
If you've got content in other apps that you want to copy back to your computer then you might be able to do via the file sharing section at the bottom of the iPad's apps tab in iTunes, or they might have wifi transfer capability.

How to programmatically copy a OneNote page from one section to another

How to programmatically copy a OneNote page from one section to another.
I don't find any interface in OneNote
2010 Developer Reference which will let me do this.
any help?
Regards,
Umar
OneNote 2010

Hi Umarinam,
Thank you for posting in the MSDN Forum.
In the page OneNote 2010 Developer Reference, you can see an Application Interface which includes methods
help retrieve, manipulate, and update OneNote information and content.
The below are some basic samples
Retrieving Section Metadata in OneNote 2010
Programmatically Opening and Closing a Notebook in OneNote 2010
Hope it helps.
Best regards,
Quist Zhang [MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Just brought home newly purchased MacBook Pro 15"/Maverick/Retinal Display. To my astonishment, there is NO DVD slot! No one in the store told me about this missing feature. Intolerable, How does one install software? Insert CDs to copy for iTunes?Do I ha

Just brought home newly purchased MacBook Pro 15"/Maverick/Retinal Display. To my astonishment, there is NO DVD slot! No one in the store told me about this missing feature. Intolerable, How does one install software? Insert CDs to copy for iTunes?Do I have to purchase an external DVD drive? Is one even available? What a crock!

I’ve owned Macs since 1990 (IICX my first), mostly desktops. Having had DVD/CD drives in all my previous laptop Macs since 2001 - (2) G4 Powerbooks, A 17” Mac Book Pro - and also inspecting a friend’s year-old Mac Book Pro which had the DVD slot - unless someone told me at purchase, I had no reason to know that the Retina display version of the 15” had NO DVD drive. ANYHOW, I fully intended to buy the non-Retina display version, because it was cheaper. Unfortunately by the time I got to the Apple store they were no longer selling the non-Retina display version; all versions were ONLY with the Retina display. And the fine distinction of a DVD vs. a non-DVD drive was not pointed out. So now I have to shell out an additional $80 bucks for an external SuperDrive.

HELP! MacBook Pro cant recognise or burn DVDs but only CDs, and...

Hi all
I noticed that there many of you have the same problem, but I really need some advice here, my MacBook Pro cant recognise or burn DVDs but only CDs, well actually occasionally it does recognise the DVDs then it burn but cannot write (on Toast), also in many other apps, like iDVD or DVDSP, it does run well on the first part of the burning but then failed at the end, with all kinda diff error msg. I have tried using many diff brands of disc too, inc verbatim.
So I borrowed my friends external DVD writer (actually a cheapy one with no brand), when I tried to burn using the external then an error msg comes up and says the writer cannot recognise the disc.
I dont wana get the MBP to repair but just wana get a external DVD writer to solve the problem, cos i need to use my computer and dont have a replacement mac, but now I am worry if the problem i now having is a system problem or just hardware, not sure if it is because the DVD writer i borrow is cheapy so it doesnt cope with mac, or just my MBP have system error that cant burn DVDs...
But my MBP can burn CDs so it is not a hardware problem? and if that is a system problem so even I buy a new DVD writer wont solve the problem?
btw, I have tried many solving methods like rewriting permission, reset PVRAM, etc
PLSSSSSSSSSSSSSSSSSSSSSSSSS HELP

I'm having the same problem you are on my 2.4GHZ Core2Duo MBP running 10.5.2. It will sometimes recognize DVDs, sometimes not... it chuggs and clunks and then spits the disc out. If i re-insert it a view times it will show up on the desktop. I get failures from Toast as well as iDVD. If i keep trying i have been able to burn files onto a disc with the finder, but then the burner fails during the verification. If put the disc back in the contents appear to be correct (after a quick look). Burning CD-Rs seems to be working fine, that with the occasional DVD write seems to point away from the HW. I am trying with both Memorex DVD+RW and Verbatim DVD-Rs...
I have tried the command/option-PR reset combo with no luck.
Any ideas?
thanks,
-graham
PS the specific error i got from iDVD was: The error #-2147352539 was reported…
Message was edited by: Graham - Sonos

Burned DVD looks like it only has one field

I have down converted 1080i HDV material to 480i using compressor. The m2v files look fine in the simulator in DVDSP (4.1.0). However when I burn a DVD and play it back, it looks like it is only showing one field. The text is jagged, and you can see the blocky horizontal lines in the video. I have tried auto fields, upper field, and bottom field. Nothing I try seems to help. Any suggestions?

Coul it be related with this thread problem?
http://discussions.apple.com/thread.jspa?threadID=604241&tstart=0

How to make different inside/outside margins for only one section?

I'm creating a Pages template and want to have several different section layouts. I've figured out most of them, but haven't been able to get one section to work as I want it.
The problem is that I want a 3 inch left margin on odd-numbered pages, and a 3 inch right margin on even-numbered pages, but for this section only (because it will have graphic objects in those margins). Other sections should have standard symmetrical margins.
I figure this should be possible, but I'm not selecting the right combination of properties. I tried searching the help file for "gutter", which is what the command was back in PageMaker, but couldn't find anything.

With your cursor in the section you want to change the margins, go to the layout inspector (second icon) & click Section. The second selection under Configuration is Left and right pages are different. Then in Layout the left & right margin settings are named inside & outside. You can see the effect by displaying your document 2-up.

Imposed books only print one copy

Greetings,
I have upgraded to CS5 and Quite Imposing software. Quite Imposing is quite nice and CS5 is great to work with.
I have one last hurdle : Imposed books only print one book copy on 8.5 x 15, 28 duplexed sheets in this cvase. After the first book is complete, the red attention light on the HP 4200 Duplex starts flashing, the message is "Tray one must be loaded with standard letter 8.5 x 11 inch paper."
The problem is that I print duplex on 8.5 x 14 paper.
I have tried every selection I can find but can't make 8.5 x 14 be the default size now that I've upgraded.
How do I instruct the printer to stay with 8.5 x 14 after its printed the first one at that size?
Thanks,
Garrett

Peter !
I'm glad to hear that I'm not the only one with this problem.
Now it has occurred differently :
One sheet letter size .indd > export to .pdf > printed one copy then printer started blinking and asked to change drawers, this time the paper size change requested was from letter to legal, rather than visa versa .
I then pushed the green check button on the printer and it asked if I wished to return to drawer 2 letter size, I pushed green check and it resumed printing.
Thanks for your time, I am attempting to help so I can be proud of myself,
Garrett

Onestep dvd help - only copying one section

Similar Messages

Maybe you are looking for