Onestep iDVD won't start reliably

I am unable to get the Onestep iDVD feature to start up reliably. I have connected my digital camcorder via firewire cable to my Mac and when I launch the Onestep iDVD feature I can't get it to get started except with a lot of fidgeting with restarting the application then the camcorder, and re-inserting the blank DVD.
Is there only one correct sequence?
What is causing failure to complete? I have been able to get it started once out of ~10 trys, but it was very frustrating. Any ideas?
My Mac is a 933 Mhz G4, 1.5 GB Ram with superdrive, 20 GB free HD space, OS 10.3.9 with iDVD life 5.0.1
I verified that the camcorder is mounted on the firewire bus. By the way is it possible that it has to be connected to firwire port #1. It was connected to port #2, since port #1 normally has a hard drive but was disconnected. Should I be using the camcorder only on port #1?
Thanks,
Brian

I can't get it to get started
What happens?
20 GB free HD space
That's minimal... We recommend 20GB+.
FireWire ports shouldn't be an issue; especially if you have the other one empty.
How many hard drives in there? Names similar?
I can't believe I'm responding to a OneStep question... I dislike (hate) OneStep.

Similar Messages

Idvd won't start, missing file

Used idvd without a problem, then later in the day idvd wouldn't start. Had to force quit and low and behold hidden under the idvd window was a message "unable to locate Billows01.dv I did a search for that file name to no avail. I did a reinstall from CD and I'm still getting that message. Any idea where I can find this file?
Thanks, Jim
20" imac, intel duo core, 2gb RAM Mac OS X (10.4.9)

Quit iDVD.
Locate a file named com.apple.iDVD.plist and get rid of it. iDVD will create a new one the next time it runs. Empty the trash and run a permission repair using the Disk Utility.
The files can be found here:
-->/Users/YourName**/Library/Preferences/com.apple.iDVD.plist
Sue

Updated to iLife '08 and now iMovie and iDVD won't Start

I received a copy of iLife '08 for Christmas and finally got around to upgrading today. The new iPhoto works just fine but when I try to start iMovie, it crashes (I have included part of the Problem Report below). I have tried restarting and it doesn't help. Then I tried to start iDVD and it flashes the "Welcome" / "Open" screen and then quits before I can do anything -- no error report. Any ideas on how to:
1) Fix both programs so they will launch -OR-
2) Restore the old versions of iMovie and iDVD
Thanks!
Process: iMovie [345]
Path: /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier: com.apple.iMovie7
Version: 7.0 (471)
Build Info: iMovieApp-4710000~2
Code Type: X86 (Native)
Parent Process: launchd [104]
Date/Time: 2008-01-02 15:53:31.019 -0500
OS Version: Mac OS X 10.5.1 (9B18)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Application Specific Information:
* Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Creating more than one Application'

Run Software Update (under the Apple menu) and update that software.

My Idvd Won't start..HELP

I just got this computer...like 2 days ago...i followed the directions in the everything mac book and went to open my Idvd and it just flickers on and then closes...anyone have any ideas why?

Hope this helps but if not come on back"
http://discussions.apple.com/thread.jspa?threadID=1075239&tstart=0

Windows Vista won't start or install - firmware or EFI problem?

I am running Snow Leopard on a 2.4GHz MacBook Pro, late 08 - early 09 model. I have been using boot camp to run Vista for the past year with no problem. This morning, I tried to start up Vista and it wasn't working. I got the option key screen to choose between OSX and Vista, but after choosing vista, the cursor blinks once and I get a black screen. The computer is quiet and nothing seems to be running.
At first I thought it was a boot camp problem. So I went into OSX, de-partitioned the drive, and repartitioned it. I then stuck the Vista install disk in, and clicked through the boot camp assistant to reinstall. The computer restarted to begin the reinstall process, but instead of starting the install disk, it did the same thing - a single blip of cursor, and then a black screen.
I'm not technically savvy, but that seems like it's not a Windows problem, but a firmware or EFI problem. The computer will run OSX, but it won't run boot camp and it won't start from a CD-ROM. The only other steps I've taken are to run Software Update and the Disk Utility from Safari. Neither helped. I'm out of warranty and would love to be able to fix it without spending tons of money. Any help is appreciated.

open terminal, run the following command:
sudo gpt -r show -l /dev/disk0
(press return, enter admin password, press return again)
output should look something like this:
Betsy7:~ kj$ sudo gpt -r show -l /dev/disk0
Password:
gpt show: /dev/disk0: Suspicious MBR at sector 0
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - "EFI System Partition"
409640 316879664 2 GPT part - "RAPTOR"
317289304 262144
317551448 200889128 3 GPT part - "RAPTOR2"
518440576 262144
518702720 67287033 4 GPT part - "XP"
585989753 82582
586072335 32 Sec GPT table
586072367 1 Sec GPT header
The first line:
"gpt show: /dev/disk0: Suspicious MBR at sector 0"
should be identical to mine. If the "Suspicious MBR"
line is missing, then it is a GPT problem, which indicates
that the MBR information is missing or more likely corrupt.
also the second and third lines will read:
start size index contents
0 1 PMBR
instead of:
start size index contents
0 1 MBR
If the MBR info in the GPT partition is corrupt or missing,
then (obviously) Windows won't be bootable.
The only tool reliably capable (that I know of) of repairing (rebuilding) the GPT/EFI
without wiping off all partitions and repartitioning the drive
is iPartition:
http://www.coriolis-systems.com/iPartition.php
The command line program "gpt" is incomplete, so use
it at your own risk:
BUGS
The development of the gpt utility is still work in progress. Many necessary features
are missing or partially implemented. In practice this means that the manual page,
supposed to describe these features, is farther removed from being complete or useful.
As such, missing functionality is not even documented as missing. However, it is believed
that the currently present functionality is reliable and stable enough that this tool can be used
without bullet-proof footware if one thinks one does not make mistakes.
http://17.254.2.129/library/mac/#documentation/Darwin/Reference/ManPages/man8/gp t.8.html
Kj ♘

Can't get OneStep iDVD going

I am trying to quickly make DVD's from tapes on my Sony DCR-TRV520 NTSC camcorder. Time is short so OneStep iDVD sounded ideal altho basic. I can't get it going on my PowerBook G4 or my wife's iMac G5, both running 10.4.3 Most of the time the camera isn't seen but occasionally the program starts up then says something like "no video was transferred" and then aborts. This sounded so beautifully simple for someone not attempting sophisticated mulimedia presentations, but it ain't working for me. Any ideas would be appreciated. (I have tried both -RW and +RW type DVD's).

Thanks for your reply. I'm not sure about the 16 bit audio part. I ended up creating the movie first, as you suggested, and it really came out well since that caused me to go ahead and add chapters etc. I was initially looking for a quick and dirty way to get the tape on DVD but it's much better with the fat edited out. It's still irritating that a new feature (Direct to DVD) that Apple makes such a big deal about doesn't work. Maybe it's because I'm using a 14 yr old Camcorder but it is on the list of supported ones. I did call Apple support but I don't think the guy know what I was talking about (it was on a Saturday). Thanks again.
iMac G5 Mac OS X (10.3.8)

Audition 1.5 won't start up

I've been using Audition 1.5 for many years, generally to slow down and transcribe music.
It's been reliable and I have had no problems. I run Windows XP.
Today it won't start up. The message is get is: "There was an unknown error starting the application".
I look in the event viewer on Windows, but see no error messages.
Drilling down into the program, all the sound files are still there.
Earlier this week, I installed Adobe Photoshop Elements and Premiere Elements.
Would there possibly be a conflict?
Any advice much appreciated.
Thank you.
John

Soundbooth CS5 do not problem about recording when I install it . In Control Panel Window7 , playback tab Speakers is default device and recording tab is stereo mix is default . When I open Soundbooth CS5 , it will detect this configuration automatically . I can record sound on web by press record on soundbooth.
Soundbooth is the best program as same as Audition CS3 . I used the method to setup the same. It do not have problem about recording .
But Audition CS5.5 has problem about recording when I would record with setting up the same . I am very puzzle . I do not understand audition cs5.5 not same Older version . Why ? It is very difficult .
In Audio Hardware , Default Input : Stereo Mix( Realtek High Definition Audio ) Not working
                             Default Output: Speakers ( Realtek High Definition Audio)
                             Master Clock: Out:Speakers( Realtek High Definition Audio)
                             Latency: 200
                             Sample Rate: 44100 HZ
In Control Panel Sound : Sample Rate : 44100HZ 16 bit
The result is
" The selected audio device has no input channels available."
In the present , I can not solve this problem . Please help me too
In the near future , if i can not solve this problem . I will decide to come back at Soundbooth CS5 . Thank you

IDVD won't load large project file..Help!

iDVD won't load large project file once I close the program for the first time since finishing the project. Basically, I made a compilation DVD of numerous individual files spread across quite a few folders/sub-menus totaling about 236 minutes on a Dual Layer DVD+R. I closed the project prior to burning but now, iDVD gets the rainbow wheel everytime you try to load that particular project. What's the deal?
Notes:
-iDVD does still load if I want to load another (smaller/simple project) or start a new one.
-I've tried to start over from scratch a make the exact same project. When I exited out and went to load it, it did the same thing.
-I'm running Mac OSX 10.6.8 Snow Leopard and iDVD 7.1.2.
Any suggestions?

Premiere Elements is not part of the Cloud... and it has a different forum
http://forums.adobe.com/community/premiere_elements?view=discussions
When you go to the correct forum, you need to provide a LOT more information
From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
•Which version of Quicktime do you have installed?

Help! iDVD won't even open!

I have iDVD '08, and it won't open.
I have the latest version of the OS, and all of the iDVD updates.
When I try to open the program, icon bounces and then nothing happens. When I try to open an existing iDVD project, same.
Then, when I go to click on the icon, I have to force quit it.
Help please.

Welcome to the Apple Discussions.
First repair disk permissions with Disk Utiltiy and delete the iDVD preference file,
com.apple.iDVD.plist.
It's located in your User/Library/Preferences folder. Or you can simply use the finder or spotlight to locate this item/s and drag them to the trash followed by a full restart.
If that still doesn't help then we need to try other remedies as well like:
Checking the Available HD Space on the Boot Volume. Free space on internal (start-up) hard drive. Anything under 15GB is suspect. I prefer to see 25 GB's or more.
Making sure to run Repair Permissions, Repair Hard Drive (Use the Apple Disc Utility)
Start a new user/acount - log in and try iDvd one more time.
http://support.apple.com/kb/TS1972?viewlocale=en_US
http://dancameron.org/general/idvd-08-wont-start
As a final resort, you could also try this:
http://support.apple.com/kb/HT1561
Hope this helps but if not just come on back.
Message was edited by: SDMacuser

IDVD won't encode - AGAIN!

I thought I had my previous problem figured out, but iDVD won't encode my video again. It seemed to be working fine since I did a complete format and re-install of everything, but here's the situation...
I have my DVD designed and ready to go. I go into Project Info and sure enough, as long as the Encoding quality is set to "Best Performance", everything is encoding. However, if I change it to High or Professional Quality, the Assets/Encoding windows resets, goes gray and the files never start to encode.
The only thing I can think of is that iDVD thinks I am too low on drive space. I'm using a MacBook Pro with 55 GB free. There's nothing on here that doesn't need to be (I even erased my original video files to clear off more space) but iDVD just won't encode. No error messages, no warning. Just nothing. Switching back to Best Performance and the files start encoding immediatly.
Any ideas on why it won't? Do I need to go out and spend more money I don't have an on external firewire drive to do a simple video DVD?
Thanks.
Matt

The format and re-install worked for me. I create an IMG first, and you can then mount that onto your system (place it on the desktop and double-click it) and it can be view just like a DVD by loading up the DVD player software.
But as I said, the tracks do not render until you start to create the DVD/img under High or Professional settings. It will render in the background under Best Performance, but the quality of that output isn't acceptable.
Give that a try and see if the final output works for you.

Intel iMac won't start! 17"

have the intel imac for 3 months now, no problems besiedes freezing 2-3 times in past few weeks or so.
Today, it froze again, only had mail & quicksilver ON, so I powered off.
Since then it won't start...
everytime it stucks with 'the ambient light' (white/sleep light static), the screen has nothing on it, tried pressing all recommeded key combinations, C, or option and many more,
nothing worked,
removed the 1 gb OWC RAM i had, still the same problem, won't start. Then inserted the install disc 1, that won't boot either!! same light & blank screen!
have powered down 4-5 times, restarted, nothing!!!
unfortunately I haven't recently backed up the hard disk, i know if i send it in, then its all gone!
Any ideas, suggestions...anything!!
HELP
SM
1.83 Intel Core Duo 17" inch - 512 RAM Mac OS X (10.4.6)

This problem occurred with my first iMac 20", albeit while I was using iDVD. When you turn on your computer, does it make a sound? Mine almost sounded like it was "groaning," you could hear the hard drive spinning and the processor starting up, but the screen stayed black. Tried all the different combinations also, and then got on the phone with AppleCare. Apple replaced my iMac as I had only had it a little over a week, citing a "hardware problem."
For you Apple probably won't replace the iMac (they told me they only do it within 14 days of purchase), but I would suggest you contact your local Apple Store/Apple Center/Apple Authorized Service Provider for reapir options if the symptoms you have are the same as mine.

SAP won't start after recabeling sap system

Hi, 
 
I have recently recabled my sap system (from wireless to wired) and now my sap instance won't start anymore. The weird thing is that nothing major was changed. When i read the logs from the work directory it seems it cannot load dbsdbslib.dll. I have updated to the latest version of the kernel and maxdb (kernel=7.00 patch 221, maxdb=7.6.06.07) and i made very sure i got the right kernel (NT AMD64). I also checked the environment settings for the <sid>adm user. The weird part is that it seems SAP cannot connect to the database, but the databse starts just fine and r3trans -d also returns no errors. Does anyone have an idea what could be wrong? 
 
Kind regards, 
Bas 
 
 
trc file: "dev_disp", trc level: 2, release: "700" 
 
 
command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE 
command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap 
 
ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll") 
Error 126 = "The specified module could not be found." [dlnt.c 255] 
sysno 00 
sid IDE 
systemid 562 (PC with Windows NT) 
relno 7000 
patchlevel 0 
patchno 221 
intno 20050900 
make: multithreaded, Unicode, 64 bit, optimized 
pid 3252 
 
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC) 
length of sys_adm_ext is 576 bytes 
SWITCH TRC-HIDE on *** 
***LOG Q00=> DpSapEnvInit, DPStart (00 3252) [dpxxdisp.c 1287] 
ShmProtect( 5, 3 ) 
SigIInit: ok (whoami=1) 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 11 installed (SigISegv) 
Pipe created:
.\pipe\SAP3252 
SigIInit: Create Message Thread 
SigIRegisterExitRoutine: exithandler installed (DpHalt) 
SigIRegisterTerminateRoutine: terminatehandler installed (DpHalt) 
 shared lib "dw_xml.dll" version 221 successfully loaded 
 shared lib "dw_xtc.dll" version 221 successfully loaded 
 shared lib "dw_stl.dll" version 221 successfully loaded 
 shared lib "dw_gui.dll" version 221 successfully loaded 
 shared lib "dw_mdm.dll" version 221 successfully loaded 
dp_loc_queue_max_blk: 40000 
mshost: >sap< 
DpSetCancelStrat: set timeout 0 at level 0 
DpSetCancelStrat: set timeout 5 at level 1 
DpSetCancelStrat: set timeout -1 at level 2 
DpSetCancelStrat: set timeout -1 at level 3 
rdisp/softcancel_sequence : -> 0,5,-1 
softcancel_sequence: >0,5,-1< 
use internal message server connection to port 3900 
msserv: >3900< 
dp_bufreftime: 120 sec 
dp_btctime: 60 sec 
dp_autoabaptime: 300 sec 
dp_autothtime: 60 sec 
dp_autojavatime: 300 sec 
dp_vm_alarm_time: 100 msec 
dp_calldelayed_time: 60 sec 
dp_startup_time: 20 
dp_noptime: 0 sec 
dp_keepalive: 1200 sec 
dp_keepalive_timeout: 60 sec 
dp_ms_keepalive: 60 sec 
dp_ms_keepalive_timeout: 300 sec 
switch off dp-keep-alive for old temus 
dp_gui_auto_logout: 0 sec 
dp_spoolalrm: 60 sec 
dp_softcancel_timeout: 5 sec 
rdisp/wp_restart_interval : 300 sec 
DpISetTrcLog: trc logging active, max size = 20971520 bytes 
dp_rfc_check_active: 1 
dp_rfc_check_all_rfcs: 0 
dp_http_check: 1 
check_master_slave: 0 
NiHsLGetServNo: got service name 'sapdp00' from operating system 
NiIGetServNo: servicename 'sapdp00' = port 0C.80/3200 
NiHsLGetServNo: got service name 'sapgw00' from operating system 
NiIGetServNo: servicename 'sapgw00' = port 0C.E4/3300 
NiIMyHostName: hostname = 'sap' 
NiHsLGetNodeAddr: got hostname 'sap' from operating system 
NiIGetNodeAddr: hostname 'sap' = addr 192.168.2.250 
NiHsLGetHostName: found address 192.168.2.250 in cache 
NiIGetHostName: addr 192.168.2.250 = hostname 'sap' (fq) 
Mon Oct 26 16:14:29 2009 
NiHsLGetNodeAddr: hostname 'www.doesnotexist0190.qqq.nxst' not found by operating system 
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0190.qqq.nxst) took 12 seconds 
Mon Oct 26 16:14:45 2009 
NiHsLGetHostName: address 1.0.0.1 not found by operating system 
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds 
NiHsLGetServNo: got service name 'http' from operating system 
NiIGetServNo: servicename 'http' = port 00.50/0080 
NiHsLGetServName: port 1F.90/8080 not found by operating system 
NiHsLGetServName: port FC.2B/64555 not found by operating system 
NiHsLGetServNo: service name 'sapdp9988' not found by operating system 
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521] 
SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff) 
SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff) 
SigIRegisterRoutine: alarm handler installed (DpSigAlrm) 
SigIRegisterRoutine: handler for signal 2 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 15 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit) 
MtxInit: 30000 0 0 
DpInitMtx: MtxInit o.k. 
PPID environment not found 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp) 
 
 
trc file: "dev_w0", trc level: 2, release: "700" 
 
* 
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, MJ
M
M command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE
M command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap
M command line arg 2: wp_id=0
M
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll")
Error 126 = "The specified module could not be found." [dlnt.c 255]
B *** ERROR => Couldn't load library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll'
[dbcon.c 4905]
M sysno 00
M sid IDE
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 221
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 4000
M
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4000) [dpxxdisp.c 1349]
M Mon Oct 26 16:14:47 2009
M SigIInit: ok (whoami=2)
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 11 installed (SigISegv)
M Pipe created:
.\pipe\SAP4000
M SigIInit: Create Message Thread
M SigIRegisterExitRoutine: exithandler installed (wp_halt)
M SigIRegisterTerminateRoutine: terminatehandler installed (wp_halt)
M SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff)
M SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff)
M SigIRegisterRoutine: alarm handler installed (DpSigAlrm)
M SigIRegisterRoutine: handler for signal 2 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 15 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit)
I MtxInit: 30000 0 0
M DpInitMtx: MtxInit o.k.
M WaitParent Thread 3252 start
M WaitParent Thread 3252 created
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp)
 
 
trc file: "trans.log" 
 
 
4 ETW000 r3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 21.10.2009 - 15:06:04
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 21 15:06:06 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dbsdbslib.dll"), hdl 0, addr 0000000188C00000
4 ETW000 7580 0.007580
4 ETW000 [dev trc ,00000] using "D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll" 16 0.007596
4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 19 0.007615
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll 38 0.007653
4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.211) 307 0.007960
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll 26 0.007986
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll 24 0.008010
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 46 0.008056
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000) 21 0.008077
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008092
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000003B4F920) 20 0.008112
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008127
4 ETW000 [dev trc ,00000] New connection 0 created 17 0.008144
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.008194
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000001A01768) 31 0.008225
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.008242
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 13 0.008255
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 16 0.008271
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO

Edited by: B. v. d. Lienden on Oct 26, 2009 5:18 PM

<div class=Section1>
Natalia,
 
To answer your questions:
1. Did you create the SAP ticket, where this problem is
reported?
I didn't report it to SAP because it is just an IDES test
system. I can easily do a reinstall, but i would like to know the cause and
solution to this problem.
 
2. Do you have dbsdbslib.dll at this location? What version?
Yes, i have the dbsdbslib.dll at location
D:\usr\sap\IDE\DVEBMGS00\exe and also D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
Version is 7000.221.16.41497 (kernel 7.00 SP 221)
 
your requested output:
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update level u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A00
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\ideadm\Application Data
CLIENTNAME=BSF02
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=SAP
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=ada
DIR_LIBRARY=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
DIR_PROFILE=D:\usr\sap\IDE\SYS\profile
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\ideadm
JAVA_HOME=C:\j2sdk1.4.2_21-x64
LOGONSERVER=
SAP
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\j2sdk1.4.2_21-x64\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\Intel\DMIX;D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=EM64T Family 6 Model 15 Stepping 13,
GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0d
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
SAPEXE=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
SAPLOCALHOST=sap
SAPSYSTEMNAME=IDE
SESSIONNAME=RDP-Tcp#47
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\2
TMP=C:\WINDOWS\TEMP\2
USERDOMAIN=SAP
USERNAME=ideadm
USERPROFILE=C:\Documents and Settings\ideadm
windir=C:\WINDOWS
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update levelu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
 
 
</div>

My iPhone 5 won't start!

My Iphone 5 won't start and tells me to connect the phone to ITunes but nothing happens when I do. The phone doesn´t show up in ITunes. What to do?

Apologies, 11.0.4 is the most recent of course...
You'll need to enter DFU mode.
Connect the iPhone to your computer and launch iTunes
Turn the iPhone off (hold down the power button at the top of the iPhone)
Hold down the sleep/power button and home button together for exactly 10 seconds, then release the power button
Continue to hold down the Home button until a message appears in iTunes telling you an iPhone in recover mode has been detected
Hopefully this should work, with you being able to restore the device in iTunes.
However, be warned that this will erase all content on the iPhone, content you can restore if you have saved backups on your Mac/PC or on iCloud.

Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.

All of a sudden Photoshop won't start [on a Macbook Air]

Dear all,
I'm on a MacBook Air with OS X 10.10.2, and I use Photoshop about once a month, but now I really need it, and it won't start:
- Immediately after I click on the Photoshop icon I get "Adobe Photoshop CS5.1 cannot be opened because of a problem." And when I click on the "Report..." button I get a very technical message (see below).
- I've used Photoshop on this machine for about a year with no problem, but recently I had a problem and needed to restore from my TimeMachine backup.
- I don't know if the problem occurred immediately after the restore or not.
- I've read innumerable threads on various forums, but nothing describes my problem exactly. I suspect a problem with my paths and permissions (since I read a report that restoring from a TimeMachine causes such problems occasionally), but I don't know which path is corrupted/missing/unreadable.
- I've tried creating a new admin account and starting Photoshop from there. It didn't work.
- I don't mind reinstalling, but I don't have an installer image. I started with Photoshop 6, then updated to CS2, CS4 and eventually CS5. I do have all the serial numbers but not all update-images.
I would appreciate any hints on how to further diagnose and some the problem.
Thanks a lot in advance!
Bojidar
And now here is my exact error message:
Process: Adobe Photoshop CS5.1 [12426]
Path: /Applications/Bildbearbeitung/*/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
Identifier: com.adobe.Photoshop
Version: ???
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: Adobe Photoshop CS5.1 [12426]
User ID: 501
Date/Time: 2015-05-03 21:53:39.840 +0200
OS Version: Mac OS X 10.10.1 (14B25)
Report Version: 11
Anonymous UUID: A0DC6EA7-1973-1B68-EFC7-5D60106F084D
Sleep/Wake UUID: 1FA6367C-EEB2-4F46-8773-EBB176EAEAC7
Time Awake Since Boot: 230000 seconds
Time Since Wake: 2900 seconds
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/adobe_caps.framework/Versions/A/adobe_caps
Referenced from: /Applications/Bildbearbeitung/*/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
Reason: image not found
Binary Images:
 0x7fff6f1c1000 - 0x7fff6f1f7837 dyld (353.2.1) <4696A982-1500-34EC-9777-1EF7A03E2659> /usr/lib/dyld
Model: MacBookAir6,2, BootROM MBA61.0099.B18, 2 processors, Intel Core i5, 1.3 GHz, 4 GB, SMC 2.13f15
Graphics: Intel HD Graphics 5000, Intel HD Graphics 5000, Built-In
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x117), Broadcom BCM43xx 1.0 (7.15.124.12.10)
Bluetooth: Version 4.3.1f2 15015, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM0256F, 251 GB
USB Device: Internal Memory Card Reader
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Air, Apple Inc., 23.6

Did tou try resetting the preferences usins the Photoshop keys as your tryind to start Photoshop. Toy cab also use Windows explored or Mac finder deleteor rename you userid Photoshop preferende if you change you OS preferences to be able to see hiddeb files and folders. Do you read the link I posted?
Restore preference files to default
In this video, learn the two methods of resetting your preference files back to default: Manual preference file removal and Keyboard Shortcut method (starts at 5:05)
by Julieanne Kost
To restore preferences quickly using a keyboard short cut:
Press and hold Alt+Control+Shift (Windows) or Option+Command+Shift (Mac OS) as you start Photoshop. You are prompted to delete the current settings. The new preferences files are created the next time you start Photoshop.
Note: Using the keyboard shortcut, preference files for custom shortcuts, workspaces, and color setings will also be reset to default.

Onestep iDVD won't start reliably

Similar Messages

Maybe you are looking for